SAFETY.md and the safing figure name GPIO4_06 for what it is - the
readback of the chain's HV_ENABLE output through U24 (the factory net
label E-STOP is kept as a note); BRINGUP records the rename, the
device-tree polarity flip that makes bit 4 read as HV_ENABLE itself,
the removal of the estop_halts_motion opt-in, and the bench check for
the flash that ships it. Recipe pins move to forgectrl 801f1f3,
grblHAL-glowforge b629c18 and python3-gfhardware c3d1790 (PV 0.1.5).
Loop pull sets interlock_latch_reset + interlock_latch within one 50 ms sample and both clear on reinsert; charge_pump_alive tracks the run and falls 0.45 s after the last charge-pump pulse (matches the measured R*C); estop follows it on both edges. Note that an interlock trip parks grblHAL in Door:0 until a cycle start.
docs/SAFETY.md documents the control board's laser safing chain as
reverse-engineered and bench-verified - parts, every net with its SoC pin,
Linux exposure and polarity, the logic, and the software layers ForgeFIRM
stacks on it - with docs/img/safety-chain.svg. Linked from the README.
BRINGUP: Next work item 11 records the interlock-latch finding (an open
loop never tripped the latch; the kernel now drives INTERLOCK_LATCH_RESET)
and the charge-pump watchdog readback, both code-complete and pinned,
bench validation on the next image.
- platform_drills.py (on the board, forgectrl stopped): dead-man trip
readback, rmmod/modprobe with concurrent attr reads, decay/microstep
readback, LED sequence.
- live_fire_drills.py: ircut (S/F selectable characterization job),
expstop (armed job + POST /controller/stop, controller left stopped),
ctrlstart (separate, operator-approved resume); the token header is sent
in exact case.
- laser_lifecycle_test.py: sigterm-mid-job - SIGTERM during an armed job
must stop it, relock the latch and exit promptly.
forgectrl ed2934b, grblHAL da4c8eb, forgefirm-app (gfhardware) 6c7534a -
all pushed and fetch-verified, license population checked for the
multi-license recipes.
- kas/README.md: the real-time rationale rests on the feeder's bounded
queue depth, not ring size; the ring is 16 MiB (~84 s at 200 kHz,
~28 min at the 10 kHz cloud tick), a capacity for cloud-mode preload.
- BUILD.md, kas config, release checklist, cold-build workflow: only
forgefirm and meta-openglow (branch scarthgap) are cloned as
siblings; every ForgeFIRM source repo is fetched by pinned SRCREV.
- UPDATE-SYSTEM.md reads as the present-state design: the cloud-mode
compatibility baseline is the cloud client's configured firmware
version, not release metadata; decisions and open items listed
plainly.
- README.md states what GRBL mode still needs the Glowforge service
for (camera-referenced homing) and what runs without it.
- BRINGUP.md: generic build-host and fwup-lab references, the retained
reproductions of the no-fire drill, the System tab.
- LIGHTBURN.md: the arm-window timeouts are machine settings.
- forgefirm-image.bb describes forgectrl as the machine-services
daemon and points at the right backlog entry.
- American spelling throughout.
The host-side coolant and fan tools call the ssh on PATH, or the client
named by GF_SSH (a wrapper such as a WSL distro's ssh), instead of a
fixed wrapper. The bench README lists every committed tool and data
file, and explains how the coolant-flow fire-gate threshold was
derived from the committed flow-matrix data and how to re-run that
derivation on another machine.
Pulls in the coarse-pacing fix for parked wait-for-operator states (a
machine left in Door or Hold no longer pins ~28% of the core), plus
P10's grblHAL CI/tests and the mlockall-root-only change. Fetch-verified.
Adds pacing_test.py (dry hold/resume + CPU measurement) and records the
diagnosis and bench validation in BRINGUP.
Pulls in the inverted-doors-bit fix in the liveness probe enclosure
guard (the probe was skipping on every spawn with the lid closed and
would have moved the gantry with it open) plus the P10 -Werror warning
cleanup. Source pushed to origin/main; bitbake -c fetch verified.
Phase 5 A-1 emission witness and A-5 HV telemetry pass on live burns;
A-2 lid-IR characterized as a weak signal at 40% (gate left watch-only);
pgood confirmed unusable as a witness on this PSU. Phase 4 X-3 (0.1s
job-based disarm on M2) and G-10 (disarm counts down in Hold) pass.
Adds live_fire_drills.py (arm-lifecycle sampler over TCP + HTTP).
K1/K2/K3 pass on image 20260814223300 with software witnesses
(fire_test A/B/U reproduce the scope-pinned reference); GATE A is
closed and live fire permitted. The campaign caught the liveness
probe's inverted doors-bit guard (forgectrl 424f185, hot-deployed,
probe live-verified MOTION OK).
gate_a_kernel_drills.py stages the three remaining GATE A kernel
drills (controlled-stop deceleration floor, resume waypoint with the
latch locked, mid-ramp latch unlock) with software witnesses and the
PSU-connector scope point. lid_ir_ambient_baseline.csv is the
fire-watch ambient anchor (600 samples, lid closed, machine idle);
BRINGUP records the baseline statistics and the idle verification of
the emission/fire/HV evidence plumbing.
grblHAL CI runs the emission harness, the new armed-window lifecycle
harness, and the switch-map truth table on every push; forgectrl and
the kernel module build -Werror in CI. All three pipelines green.
Four sessions against the reported messages: arm once per job with
M5/M3 persistence and the M2 close (grace pushed beyond the horizon so
only the program-end path can disarm); a displaced sender must re-arm;
the disarm grace counts down in Hold; a blocking cooling verdict
refuses the arm. Test-the-test proven: a build with the job-based
window reverted fails at the first discriminating assertion. Wired
into the controller repo CI alongside the emission harness.
forgectrl aa99d30, grblHAL-glowforge e74f53f, and the forgefirm-app
sources at python3-gfhardware c9d602a (PV 0.1.3) - the Phase 1-9
remediation work, pushed and pinned.
- Controllers stop at K80, before forgectrl at K90: runlevel 0/6 no
longer tears down the cooling engine, fire gates, and broker while a
controller may still be executing a job.
- The grblhal/gfcloud init scripts are real emergency levers: stop
routes through the supervisor (POST /controller/stop - a bare pkill
was safed and respawned seconds later), start resumes supervision,
status exists, and the pkill fallback matches full executable paths
instead of truncated names or bare substrings.
- slotmigrate: the partition grow gets the same 2048-sector tolerance
as the filesystem branch (an exact compare rewrote the MBR at S02 on
every boot on disks where the grow cannot land on the last sector),
verifies it made progress, and the resize2fs retry is bounded at
three attempts with the counter kept on p3 itself.
- Installer: archive product/platform are verified after the signature,
and a validly signed OLDER release now requires an explicit yes
instead of installing as a silent downgrade. All predictable /tmp
paths in the installer and ffboot are mktemp now.
- release.sh rejects multiple positional versions (the last one used to
win silently) and a release without factory-era verification dies
unless explicitly bypassed; mkfw.sh refuses to pack when the public
key for the post-sign self-check is missing.
- forgefirm-logrotate: size-capped rotation (boot + hourly) for the
/data logs - a full /data breaks settings, update staging, and the
controllers own writes.
- Bench build scripts derive every path from their own location or
FF_SRC_TOP/FF_BUILD_TOP and log to mktemp files.
Emission witness, lid IR fire watch (watch-only until characterized),
faults/HV telemetry, measure-laser cleanup, and the head I2C error fix
(rides the pending image flash); bench items listed.
BRINGUP gains the Phase 4 (stale-gate cluster) record - code-complete,
host-verified, hot-deployable, bench drills listed. LIGHTBURN.md now
describes the job-based armed window: relock at program end, on a
sender change, or after the spindle-off grace (counting even in Hold).
Code-complete and host-verified across forgectrl, the GRBL controller,
the cloud clients, and the kernel module; kernel rows ride the pending
image flash, bench drills listed.
- Move the passwordless-root debug-tweaks image feature out of the
shared kas config into forgefirm-image-dev.bb, so the release
forgefirm-image built from the same config is not passwordless-root.
release.sh gains a gate that reads the built rootfs /etc/shadow and
fails on an empty root password, plus a config-level guard that
debug-tweaks is not present in the resolved kas dump. (B-1)
- The installer copies ffboot out of the signature-verified new rootfs
it already mounts, instead of fetching and executing it from a mutable
GitHub raw ref. (B-2)
- Record audit remediation Phase 2 (GATE B) status in BRINGUP.md,
including the bench pass still required to close the gate.
- LIGHTBURN.md: mandatory "Before you cut" safety section; the
walkthrough now reflects the firing machine (dry runs need the
layer output off or M5; live first-cut instructions); the homing
entry documents homing_mode and the gfcloud method; the machine
address is a placeholder.
- README.md: condensed safety section linking the full text and the
regulatory notes.
- INSTALL.md: "Regulatory and legal" section ahead of the install
steps; routine updates route through the panel updater rather than
the installer.
- BRINGUP.md: the release signing key is described as held offline
(no on-disk path); bench address and credential notes removed;
Next-work item 7 corrected (the installer embeds the production
release key); status entry for audit remediation Phases 0-1; the
GATE A kernel drills join the pending image-flash checklist.
- bench scripts: the target host comes from GF_HOST (or argv) instead
of a hardcoded address.
- laser_stream_test.py: per-session controller runs with a hermetic
cooling-verdict publisher; new assertions that every stream
terminates with FIRE clear (including M3 held to stream end) and
that no FIRE bit rides a zero-step gap; a cycle-churn session
exercises the stop/start seams.
Audit findings D-1, D-2, D-3, D-5, D-10, D-12, B-10, and the harness
half of D-4/G-1.
Add Next work item 9: the panic handler, control_12v removal, decay-mode
state tracking, module build hygiene, SDMA/EPIT/GPIO probe guards and
head_make_safe are code-complete and build-verified, with the bench check
each one still needs and a note that the batch ships with a full image
flash rather than a module hot-swap.
kas/README: drop the control_12v residue (the node is gone), state that
the buzzer driver is not part of ForgeFIRM, and record that the pre-SPDX
LICENSE strings remain only in layers this build does not use.
The controller now maps the door pair and the interlock loop onto the core's
safety-door signal, with the e-stop bit behind a machine setting. Records what
is gated and what is deliberately not, the answer to the audit's latch-reset
question, and the bench items the change still needs.
The interlock_circuit bitmask is fully mapped: b0/b1/b3 from the scope
experiment already recorded in the gate section, b2/b4 from the factory decode
the attributes were ported from, and the armed kill-mid-FIRE drills read the
mask consistently across armed, firing, idle and disarmed states. Trip recovery
was exercised in commissioning runs.
The safety-mapping item now says what is actually left of it: door and e-stop
evdev into the controller's feed-hold and halt path, plus the question of a
software reset path for the laser latch.
README: replace the stalled REST/GUI roadmap with what the firmware does -
GRBL mode over TCP for LightBurn/UGS/cncjs, optional cloud mode, the web
control panel, cameras, A/B install beside the factory firmware - plus the
supported hardware incl. the 8 MP camera limitation and a real roadmap.
kas/README: xvclk is the board's 24 MHz oscillator; the pin/push rule covers
every source repo; camera and motion sections are hardware-validated, with the
OV8856 caveat spelled out; the device-tree item closes with the control_12v
residue named; forgectrl is the machine-services daemon with two supervised
controllers.
LIGHTBURN.md: drop the pre-first-light status line.
BUILD.md: state the NXP firmware licensing and where the EULA lives on the
machine. The image now installs firmware-imx-lic, so the EULA text ships beside
the VPU/EPDC blobs it covers; a bbappend declares that package at parse time,
which is what makes it installable from an image recipe.
ScottW514