ScottW514
c177aabefa
- forgeext 2d0391e -> 31cdb40 (0.1.1 -> 0.1.2): machine_host_token() opens FORGEEXT_HOST_TOKEN_FILE when it is set and not empty, and /run/forgefirm/ext-host.token otherwise (ebdbf59); the rest is host tests (run_test's sender claim, event stream, storage quota and memory.max; install_test's served page; the trimmed kit, ffx and allowlist cases). Proof: the recipe's forgeext, built from 31cdb40 (bitbake forgeext through an untracked externalsrc overlay; packaged /usr/bin/forgeext sha256 15ca6003b59f69fb9eadf686094430fbbd25e7cc177230a0417738484fe3427e), replaced /usr/bin/forgeext on the bench reference's image 20261015101725 and ran with no FORGEEXT_HOST_TOKEN_FILE in its environment. exthost.platform, exthost.service, motion.jog-roundtrip and exthost.motion-job passed on it, in campaign c-20261015103714-0c91: the package's job reached the machine as job:org.forgetest.reference through the host's credential read from the default token file, 6 lines sent and acknowledged, the head moved, the latch locked and no emission throughout. The flashed binary was put back after the run. bitbake -c fetch forgeext resolves this pin.
OpenGlow / ForgeFIRM firmware for Glowforge
BETA
ForgeFIRM is in beta. Every release below 0.1.0 is a beta release. It's stable, but you may still hit the occasional bug, and expect frequent updates. Upgrade whenever a newer release is available, and report what you find on the community forum.
Open firmware for Glowforge brand CNC lasers. ForgeFIRM replaces the cloud-dependent factory software on the stock control board, with no hardware modification, and gives the machine a local controller, a local web control panel, and a standard Grbl interface. The factory cloud experience stays available as an option.
This repository is the base of the build and of the release: the
meta-forgefirm Yocto layer, the kas configuration, the image recipes, the
install and release scripts, the acceptance tool (forgetest/), the bench
tools (scripts/bench/), the bench actuator firmware (fixture/), and the
release artifacts (releases/).
Start here
https://docs.forgefirm.org/ is the documentation, and the source of truth for every fact about the machine and the firmware.
| Read this first | Safety |
| Put it on a machine | Installation |
| Use it | Usage, LightBurn |
| How the machine works | Technical |
| How ForgeFIRM works with it | ForgeFIRM internals |
| Build, test, release | Developers |
| Downloads | Releases |
| Questions | Community forum |
Build
kas build kas/forgefirm-glowforge.yml
Build covers the host setup, the two images, the source variant and the debug kernel. Release flow covers the pins, the push order and the signing pipeline.
Test
cd forgetest && python3 -m unittest discover -s tests -v
The acceptance catalog that gates a release, and the bench tools, are on Acceptance and The bench.
Contributing
AGENTS.md carries the rules for this repository and for the project: safety ordering, proof before done, the push order, and the writing rules. They apply to human contributors too, and Contribute is the same set on the site.
What this costs
Nothing. ForgeFIRM is free in both senses, under MIT and GPL licenses. There is no paid tier, no license key, no subscription and no Pro edition. If someone offers to sell it to you, the licenses allow it, but what you take home is their build rather than this one: get it from the source.
Safety
These machines contain a CO2 laser: it burns, blinds, and starts fires. Never defeat the lid switches or the interlock. Never leave a running job unattended. Keep a fire extinguisher within reach. Read Safety before you cut your first job, and Regulatory and legal before you install.
This is experimental software. Use of it could seriously maim or kill you or others, and it may void your warranty. Use it at your own risk.
Glowforge is a trademark of Glowforge, Inc. This project is not affiliated with, authorized by, or endorsed by Glowforge, Inc.