The embedded pubkey is the production key from the signing ceremony;
release.sh's key-match gate now refuses any other signer. Verified:
production-signed archives pass fwup 1.16 and the factory's 0.14.2;
dev-signed archives are rejected.
The runbook no longer records the bench machine's fuse identity (a
fuse identity cannot be rotated, so a public document must never
carry it); the forgectrl pin follows that repo's history rewrite.
Gates (clean tree, version single-source across FORGEFIRM_RELEASE /
rootfs stamp / .fw meta-version / tag, rootfs-vs-slot size with early
warning, installer-embedded pubkey must match the signing key,
factory-era fwup verification of the packed archive), then build,
pack, sign, checksum, and stage forgefirm.fw + sha256sums.txt +
forgefirm-image-glowforge.rootfs.wic.gz with the gh publish command
(--publish runs it where gh is authenticated). release.sh --dev packs
a dev-key-signed forgefirm-dev.fw from the release rootfs for the GUI
upload path. Signing keys are always passed explicitly - no defaults.
kas/README release order and the plan doc updated to match.
The gf_hostname override is gone (the forgectrl UI no longer offers
it): the hostname is a pure derivation of the serial - base 23 over
the factory consonant alphabet - so a gf_serial override re-derives
MACHINE.HOSTNAME and the fuse derivation stands otherwise. BRINGUP
records the panel rework (units, fuse identity, always-on position)
as offline-verified; board deploy and pin bumps held during the
firmware-upgrade bench testing.
install-forgefirm.sh is now single-stage and never repartitions: run
from factory firmware, it archives every factory slot version plus the
recovery boot partitions to /data/forgefirm/archive (manifest with
md5s), verifies the signed forgefirm.fw against the embedded ForgeFIRM
pubkey (raw 32-byte form for the factory's fwup 0.14.2; dev key until
the production key ceremony), applies it to the INACTIVE slot with the
factory's own fwup, post-verifies the written rootfs, installs
/data/ffboot, and flips the saved env with read-back verification. The
booted factory slot stays installed and bootable; /data is untouched
beyond the archive. Fixed release asset name forgefirm.fw (version in
the fwup metadata and release tag).
slotmigrate (new recipe, rcS before mountall) reclaims the legacy
layout on eMMC-slot boots: deletes p4, grows p3 to the end of the
disk (sfdisk + partx BLKPG - works with a sibling partition as root),
then e2fsck+resize2fs. Every step is keyed off the actual disk state,
so interrupted runs resume and factory-layout disks are a no-op; SD
boots never touch the eMMC.
Basic/Plus share the passive closed-loop cooling and the 60-75 F
window per Glowforge's tech specs and owners-forum consensus; the
Pro's solid-state TEC buys 60-81 F. Spec-level only - tec_present
stays a user setting regardless, since tec_on has no readback.
Low side: factory floors (CM* window minimums ~1-4 C, the ~16 C
'warming up' operating floor) and the planned cool_temp_min /
cool_temp_start keys with a heater-driven warm-up phase. TEC:
presence is undetectable (tec_on is write-only, Pro-only hardware on
a common board) so tec_present becomes a user setting, with
hysteresis control toward the factory ~18 C setpoints when enabled.
Slot-agnostic boot proven on the bench: the same release ext4 boots
from SD and from eMMC p4 steered by the saved env alone. fwup
cross-version compatibility proven; slot-sized rootfs, size gate,
ext4 artifact and mkfw.sh in place. Found for Phase 1: the image
ships no /etc/fw_env.config.
The release image now targets the 200 MiB factory eMMC slot: content
plus 40 MiB working space, hard build failure past the slot size. The
raw ext4 is deployed alongside the wic; scripts/mkfw.sh packs it into
a signed .fw with factory-pattern upgrade.a/upgrade.b tasks. fwup
1.16.0 recipe (applies ForgeFIRM and Glowforge-signed archives on
device) is installed in both images. Dev images stay SD-sized with a
256 MiB working margin and no ceiling.
Verified on the 20260808153331 build: release ext4 180.8 MiB; signed
.fw applies byte-exact with fwup 1.16.0 and with the factory's 0.14.2
(raw-format pubkey), and 0.14.2 -V verifies the signature.
flow_confirm_drill.py walks the driver's suspicion/confirmation state
machine through every verdict with real pump-off transients in one M8
session; flow_escalate_drill.py exercises the starved-re-check
escalation against a short GFCOOL_CONFIRM_MAX_S. BRINGUP records the
triage resolution (the 2026-08-03 faults were a real transient
stagnation, probable pump airlock - the check was right), the slug/
circulation measurements, and the new check semantics.
forgectrl ad0b441: OpenGlow branding, operational /status dashboard.
grblHAL-glowforge c472a13: position anchor at homing for the status
readers. Runbook updated.
Non-empty gf_serial / gf_password / gf_hostname in /data/forgefirm.conf
(set from the forgectrl GF Cloud tab) are applied with set_cfg before
Machine() is built, so they beat the OCOTP fuse identity - Machine sets
its fuse values with keep_value. The --timeout default comes from
GFHOME_TIMEOUT_S when the controller provides it, so one GUI setting
governs the whole session. Docs: control-panel runbook notes.
gitsm-pinned build of the controller with a sysvinit script (defaults 92, after forgectrl), installed in both images. Reboot-verified on the bench: controller and forgectrl come up unattended and Grbl answers on TCP:23.
The head lis2hh12 (i2c-3 0x1e, direct-I2C at ~530 Hz - st_accel sysfs one-shots are ~6 Hz and the kernel has no IIO triggers) sees rail contact as a 20-40x jolt over the creep baseline within ~4 ms. bump_seek.py: 3/3 detected hits, zero false positives over ~180 mm of creep, jog-cancel stop and back-off. BRINGUP carries the full record and the driver integration design.
Sources live at github.com/ScottW514/forgectrl (history extracted, layout src/ + init/); the recipe pins SRCREV and installs the init script from the repo. Adds the build-forgectrl.sh bench cross-compile script.
NEON kernel for the YUV420 superpixel convert (vld2q deinterleave, rounding-halving greens, mlal/rshrn luma, pairwise-add chroma block sums), bit-identical to the scalar path and proven so on a live frame via the FORGECTRL_NEON_CHECK one-shot memcmp. Convert 75 to 18 ms; the stream now runs at the OV5648 frame rate. Motion coexistence re-proven at 15 fps (clamped 0).
Demosaic the superpixels straight to planar YUV420 and encode on the CODA960 (mainline coda V4L2 mem2mem, node found by personality); libjpeg stays as the automatic fallback and the snapshot path. All camera paths now demosaic from a cached bounce copy of the frame: the V4L2 MMAP capture buffers are uncached, and reading them in-place costs ~340 ms/frame vs 43 ms memcpy + 75 ms cached convert. Per-frame stats logged every 100 frames; /cam/status reports the encoder.
ScottW514