A new script beside the image recipe, run by both images as the last
rootfs step (ROOTFS_POSTPROCESS_COMMAND:append, after every +=, the dev
recipe's and debug-tweaks' included); a refusal is bbfatal. It checks
every rule and prints every failure before it exits. FORGEFIRM_IMAGE_KIND
(release by default, dev in forgefirm-image-dev.bb) picks the sshd policy.
The rules:
- syslog: /usr/sbin/rsyslogd is on the image, /etc/init.d/syslog starts
it and runlevel 5 starts that script; no syslogd or klogd is linked in
a bin directory and no init script runs one. This is the image half of
what logs.routing checked on the board; that test left in 01f5991 with
nothing else holding it.
- sshd: sshd_config and sshd_config_readonly take passwords
(PasswordAuthentication yes) and send no banner; on a release image
PermitRootLogin no and PermitEmptyPasswords no; sshd_config.d sets none
of the four, since an included value comes first. setup.ssh-until-
reboot checked the first two on the board and left in 01f5991;
release.sh gates the release pair at release time only.
- dhcp-name: the wlan0 dhcp stanza's udhcpc_opts carries
-x hostname:$(hostname).
- mdns: no /etc/avahi, avahi-daemon or libnss_mdns, and no mdns source
on nsswitch.conf's hosts line.
dhcp-name and mdns are the image half of setup.machine-name, whose
scripts test_image.py's MachineNameTests already run.
test_image.py's RootfsLintTests run it on a fixture tree: the tree that
holds every rule passes as either image, the BSP layer's own interfaces
file passes, and one drift per rule fails naming the rule (a busybox
syslogd link; a Banner, on either image; root and an empty password,
refused on a release image and passed on a dev one; a dhcp stanza with
no name; /etc/avahi).
Proof: test_image.py under Linux, 21 OK; pyflakes clean. On image
20261015134521's two rootfs trees from the build, the release tree
passes as release, the dev tree passes as dev, and the dev tree linted
as release is refused on PermitRootLogin and PermitEmptyPasswords in
both sshd files. bitbake -e places rootfs_lint last in both images'
ROOTFS_POSTPROCESS_COMMAND, with FORGEFIRM_IMAGE_KIND release and dev.
The layer content hash moves: the next image cannot inherit a campaign.
The rootfs mounted read-write, so a slot ran with its own files open to
change, and the factory-slot mounts rode along on the release image.
Both images now carry the read-only-rootfs feature: the ro root line and
the rcS default, the volatile links made at rootfs time, a writable copy
of /var/lib at boot, a build failure for a post-install that needs the
machine, and the removal of shadow, base-passwd, update-rc.d and
update-alternatives.
What must last or change at run time is handled file by file:
- forgefirm-users renders the four account files from the record into
/run/forgefirm/accounts and bind-mounts each copy over its /etc file
(useradd and the rest are gone with shadow); a render writes through
the mount, and the image's own files apply until the first render.
- forgefirm-banner bind-mounts a copy of /etc/issue and writes the
address block through it.
- sshd keeps its host keys under /data/forgefirm/ssh, so the fingerprint
survives updates; both sshd configs carry the same HostKey lines.
- forgefirm-logging passes logrotate a state file under /var/run
(logrotate refuses to run without one).
- forgefirm-persist points the boot timestamp and the random seed at
/data/forgefirm.
The dev image appends the /factory slot mounts, without nofail (busybox
mount hands it to the kernel, which rejects it). The rootfs command
entries lose their semicolons: on scarthgap the value is the task's
vardeps, split on whitespace, so "name;" left the function body out of
the signature and a changed body did not remake the rootfs; with the
bodies tracked, the dev image's DATETIME string needs a vardepsexclude.
release.sh gains the read-only gate (root ro, no /factory line,
ROOTFS_READ_ONLY=yes, host keys on /data). image.health checks the
mounts, the account binds, the banner bind, the host keys and the
dev-only /factory mounts.
Proven on the bench reference (dev image 20260909140901): / ro, /data
rw, /var/lib a tmpfs copy, the four account files and /etc/issue bound
from tmpfs, the host keys in /data/forgefirm/ssh, no "Read-only file
system" line in any log; forgectrl.auth and commission.account-login (a
temporary account rendered, logged in over HTTPS and removed again),
kernel.latch-locked-idle and motion.liveness-probe PASS; logrotate runs
with the volatile state. forgetest unit tests 335 OK; both images build
clean, and debugfs on the built rootfs shows every setting above.
meta-forgefirm: the forgefirm-users init replays the account at boot;
sshd refuses root and empty passwords and runs only while the panel
turns it on; the release image keeps an empty root password for the
console; the console banner; avahi announces forgefirm.local; https in
libmicrohttpd and ulfius; the panel on 80 and 443; the license bundle on
the rootfs; release.sh checks the root policy on the built rootfs.
forgetest: the commission suites (commission, commission_dark,
commission_sheet: 23 cases); the runner turns cloud mode on with the
typed phrase for a test that declares it; the baseline's motor_lock is
0; the log-export test checks the bundle for the camera key; the record
helpers write bytes as given and join the daemon's paths as POSIX. The
stream harness gains rule 24: a hold verdict is held again after a
resume. Bench drills: lens_travel.py and lens_stop_accel.py.
Docs: BRINGUP carries the present state; CAMPAIGN-LOG carries the dated
record.
BRINGUP describes the present: the 54-test catalog and its seven-test
always core, the tier counts, the shipped low-temperature gates, the
density floor ($35 = 10), the two local core commits, the ffboot env
write, the aa-offset route, the current bench image, and the bench
measurements the audit asks for (pooled into the next session). The
workstation shell notes and every em dash are gone.
forgetest: the takeover waits for the cloud client too (found by its
command line); the unauthenticated /boot probe names the endpoint's
parameter; the UI prose is American English. Recipes: forgetest
fetches its package directory and init script only and drops
__pycache__ at unpack; the dev image no longer re-adds forgectrl; the
release image's remove list drops the gfui-client the BSP no longer
has; the platform identity strips the kernel's local-version hash
from the modules directory name, so a re-patched kernel keeps its
fingerprints. grblhal restart is stop then start. release.sh --dev
packs the dev image. fixture.sh refuses a readable env file.
Bench tools: the live-fire drills measure the lid-IR baseline before
every run and point at the fire-watch thresholds the engine reads;
one thermistor conversion (gfbench.degc) serves every drill; the six
dated measurement records leave the tool directory; feeder.c names the
two sysfs writes its caller makes.
Host tests: forgetest 258 pass; the coverage lint reports no uncovered
path across 54 tests. Acceptance: forgectrl.auth covers the /boot
probe; update.* cover ffboot and the manifest identity; the runbook
and bench-tool changes have no catalog consequence.
The supply's power-good line is active high, static across HV enable and emission, and driven; the facts bank and CAMPAIGN-LOG carry the measurement and the item closes. The kernel-drill latch-unlock guard read the old inverted value as HV not good, a check that was vacuous and would refuse every run once the module reads the line correctly; it now uses the chain's own witnesses, the charge-pump watchdog and the engine state. pgood_probe.py watches the line beside the chain through the kernel readbacks and is registered on the bench page. The dev image lists python3-mmap and python3-ctypes again for the pad-level bench tools the python trim had left without them.
Comment only. The edit changes the content hash of meta-forgefirm, which
the acceptance manifest counts as a platform change, so the next image
needs a full campaign. Accepted: a full campaign is planned.
Removal specs accumulate and apply after every append, so a dev-recipe
IMAGE_INSTALL:remove could not give nano back. The release recipe now
removes ${FORGEFIRM_RELEASE_TRIM} (default nano) and the dev recipe sets
it empty; the spec expands when it is applied.
No catalog consequence: image composition only.
IMAGE_INSTALL:remove applies after every append, so the release recipe's
removal of nano also stripped it from the dev image that appended it back.
The dev recipe now re-sets the removal list to gfui-client alone.
No catalog consequence: dev image composition only.
The distro keeps its ipv6 feature (busybox networking and ifupdown
inet6, openssh, ntp and rsyslog follow); forgetest binds "::" by
default, one dual-stack socket that still serves IPv4. The release
image drops nano (with it file and the libmagic database, 8.7 MB; the
dev image keeps nano), the udev hardware database (7.7 MB of USB and
PCI identities for buses the board lacks, via BAD_RECOMMENDATIONS) and
urllib3's pyOpenSSL/cryptography recommendation (6 MB; nothing imports
them, TLS goes through the standard library). BRINGUP item 21 records
the round and the bench checks it owes; item 16 gets its re-measure
plan on the UP kernel with the performance governor.
Coverage: image.* covers the rootfs composition and the distro conf
(platform); forgetest's own suite covers the server.
The service-protocol half of the cloud catalog on its own test: the cloud
client restarted as gfutilities' emulator under the /run/gfcloud-emulate
marker signs in, passes the firmware check, opens the WebSocket, answers
the connect-time hunt and the image requests with the dev image's canned
frames, and runs a print from the app through the real download path to
':completed' - nothing moves, nothing arms, and only the app has to be
driven, by a person or an agent through the prompt API. The real client
is restarted afterward and its hunt waited out. session_live now knows
the emulator's session is not the machine's, so enter_cloud restarts it
rather than reusing it; restart_client is the one restart the offline
and emulator entries share.
The dev image adds python3-gfutilities-emulator (the fixtures, packaged
on their own in meta-openglow); forgefirm-app moves to 12ad3b1 (gfcloud
--emulate). Catalog: 44 tests, 27 auto / 9 operator / 8 live; the new
test covers the gfutilities service layer and examples/, which step 4
will take off the other cloud tests. Replays over the prompt script;
contract and BRINGUP updated. A layer change (the dev image recipe):
everything re-requires on the next image.
The image has no `nice` binary - BusyBox ships renice only - so
motion.step-timing-under-load could not spawn its CPU hog at all. Set the
niceness from the parent with os.setpriority once the child exists, and
assert the value that actually took: a hog left at nice 0 would be a
harsher test than intended, and one left unset must not pass silently.
Add htop to the dev image for bench diagnostics. The release image is
unchanged - it carries neither forgetest nor htop.
A stdlib-only daemon on the dev image (HTTP :8090) that runs the acceptance
catalog against the machine from a self-contained page, keeps the append-only
result log under /data/forgetest, and exports the release artifact the gate
reads. Tests declare kind (auto / operator / live), hardware (api / takeover),
coverage globs, prerequisites, and core membership; a test's domain
fingerprint is the hash of the manifest files its globs select plus the
platform and its own implementation, so a PASS stays valid exactly while
nothing it covers changed. Campaign rules: a FAIL ends the campaign, the core
(image health, kernel latch and drills, one live emission witness) is never
inherited, invalidate-all forces a full campaign, no SKIP. Live tests need the
operator acknowledgment and the physical arm press through the controller;
takeover tests stop forgectrl for the duration with a crash-recoverable
marker; the tool never touches the laser latch.
Catalog v1: 24 tests ported from the proven bench drills with their recorded
pass criteria (image, kernel K1-K3 and fire A/B/U, forgectrl API and logs,
motion incl. dead-man, cooling, live laser, camera, update, cloud). The bench
tab lists every scripts/bench tool and runs the board-side ones as
subprocesses (takeover tools wrapped). 44 host unit tests, including the gate
verification fixtures. Installed only by forgefirm-image-dev, with the bench
scripts under /usr/share/forgetest/bench.
- Move the passwordless-root debug-tweaks image feature out of the
shared kas config into forgefirm-image-dev.bb, so the release
forgefirm-image built from the same config is not passwordless-root.
release.sh gains a gate that reads the built rootfs /etc/shadow and
fails on an empty root password, plus a config-level guard that
debug-tweaks is not present in the resolved kas dump. (B-1)
- The installer copies ffboot out of the signature-verified new rootfs
it already mounts, instead of fetching and executing it from a mutable
GitHub raw ref. (B-2)
- Record audit remediation Phase 2 (GATE B) status in BRINGUP.md,
including the bench pass still required to close the gate.
The release image now targets the 200 MiB factory eMMC slot: content
plus 40 MiB working space, hard build failure past the slot size. The
raw ext4 is deployed alongside the wic; scripts/mkfw.sh packs it into
a signed .fw with factory-pattern upgrade.a/upgrade.b tasks. fwup
1.16.0 recipe (applies ForgeFIRM and Glowforge-signed archives on
device) is installed in both images. Dev images stay SD-sized with a
256 MiB working margin and no ceiling.
Verified on the 20260808153331 build: release ext4 180.8 MiB; signed
.fw applies byte-exact with fwup 1.16.0 and with the factory's 0.14.2
(raw-format pubkey), and 0.14.2 -V verifies the signature.
Every image writes /etc/forgefirm-version and echoes "ForgeFIRM
<version>" on the serial-console login prompt (/etc/issue, beneath the
OpenGlow banner) and at SSH login (motd). Release images carry
v${FORGEFIRM_RELEASE}; the dev image stamps the build timestamp - the
same DATETIME as the artifact name - tagged (dev) so a bench machine
is never mistaken for a release.
Sources live at github.com/ScottW514/forgectrl (history extracted, layout src/ + init/); the recipe pins SRCREV and installs the init script from the repo. Adds the build-forgectrl.sh bench cross-compile script.
The dev image required the shared glowforge-image base directly, so it
was not a superset of forgefirm-image (it lacked v4l-utils, audit N12).
Require forgefirm-image and add forgectrl + debug tooling on top.
ScottW514