ScottW514
f74382984c
A new catalog test for the one capability that moves the head. The reference package is installed with motion.jog and jogs on the test's word, through a file the service watches, so the motion happens at a moment the test chose and can be witnessed while it does. What it proves on the machine: the host's credential is 0600 and root's and holds motion.jog and not a camera; a jog past the bounds is refused by the host with the machine never asked; the package's jog moves the head and the head accelerometer sees it; and across the whole of it the laser latch stays locked and the emission witness stays at zero. The head is jogged back to where it started. The laser check reads the field names the machine actually publishes (laser_locked, laser.emission_samples). The first version of it asked for names that are not in /status, so it compared None to None and could not have failed. Proven. The unit suite: 451 tests. On the bench reference, image 20260921220023 with the cross-built daemons mounted over the image's: exthost.motion-jog PASS, and exthost.service and motion.port-jog PASS beside it. Against the image's own daemons it FAILS: the route is 404.
OpenGlow / ForgeFIRM firmware for Glowforge
BETA
ForgeFIRM is in beta. Every release below 0.1.0 is a beta release. Expect problems, and expect frequent updates. Upgrade whenever a newer release is available, and report what you find on the community forum.
Open firmware for Glowforge brand CNC lasers. ForgeFIRM replaces the cloud-dependent factory software on the stock control board, with no hardware modification, and gives the machine a local controller, a local web control panel, and a standard Grbl interface. The factory cloud experience stays available as an option.
This repository is the base of the build and of the release: the
meta-forgefirm Yocto layer, the kas configuration, the image recipes, the
install and release scripts, the acceptance tool (forgetest/), the bench
tools (scripts/bench/), the bench actuator firmware (fixture/), and the
release artifacts (releases/).
Start here
https://docs.forgefirm.org/ is the documentation, and the source of truth for every fact about the machine and the firmware.
| Read this first | Safety |
| Put it on a machine | Installation |
| Use it | Usage, LightBurn |
| How the machine works | Technical |
| How ForgeFIRM works with it | ForgeFIRM internals |
| Build, test, release | Developers |
| Downloads | Releases |
| Questions | Community forum |
Build
kas build kas/forgefirm-glowforge.yml
Build covers the host setup, the two images, the source variant and the debug kernel. Release flow covers the pins, the push order and the signing pipeline.
Test
cd forgetest && python3 -m unittest discover -s tests -v
The acceptance catalog that gates a release, and the bench tools, are on Acceptance and The bench.
Contributing
AGENTS.md carries the rules for this repository and for the project: safety ordering, proof before done, the push order, and the writing rules. They apply to human contributors too, and Contribute is the same set on the site.
What this costs
Nothing. ForgeFIRM is free in both senses, under MIT and GPL licenses. There is no paid tier, no license key, no subscription and no Pro edition. If someone offers to sell it to you, the licenses allow it, but what you take home is their build rather than this one: get it from the source.
Safety
These machines contain a CO2 laser: it burns, blinds, and starts fires. Never defeat the lid switches or the interlock. Never leave a running job unattended. Keep a fire extinguisher within reach. Read Safety before you cut your first job, and Regulatory and legal before you install.
This is experimental software. Use of it could seriously maim or kill you or others, and it may void your warranty. Use it at your own risk.
Glowforge is a trademark of Glowforge, Inc. This project is not affiliated with, authorized by, or endorsed by Glowforge, Inc.