mirror of
https://github.com/openglow-org/forgefirm.git
synced 2026-09-27 16:51:12 -07:00
ScottW514
d69bfad77a
Extract the factory motion profile from the _RESOURCES pulse streams (new puls_profile.py): 700/590 mm/s2 X/Y accel on v2.6.0 firmware, 202 mm/s travel peak at the 28160 Hz travel tick, PIC currents X 135/33 and Y 22/5 run/hold, decay mode 1. Add the bench_m2.py round-trip jog + feed-hold suite (all green 2026-08-02: sustained 200 mm/s, exact returns, clean hold/resume, zero underruns) and update BRINGUP.md: board moved to a fixed lease at 172.16.1.97, analog config now applied by the sink itself, $RST=$ note for stale stored settings.
ForgeFIRM bench tools
Hardware-verification tools for the ForgeFIRM bench. All run ON the target board (dev image, python3 present) unless noted.
| Tool | Purpose |
|---|---|
feeder.c |
Spike-step-3 underrun proof: streams NOP pulse bytes to /dev/glowforge with wall-clock pacing, bounded queue depth, deadman flock, SCHED_FIFO. Usage: feeder <hz> <seconds> <depth_ms>. Passed 100 kHz × 120 s under full load with 0.2 ms worst write latency. Cross-compile with build-feeder.sh (WSL). |
bench_phase2.py |
End-of-data protocol bench (audit M2–M5): underrun detection/ack, parked no-replay guard, resume(0), continuous-feed stability, 20× run/underrun cycles. Motion-safe (motors locked, laser latched). 16/16 PASS on 2026-07-26. |
check_pwm.py |
Laser PWM register check (audit M8): reads PWM2 PWMCR/PWMPR via /dev/mem, expects divider 13 × ~127 counts ≈ 40 kHz. The scope on LASER_PWM remains the final pre-live-fire gate. |
build-feeder.sh |
Cross-compiles feeder.c the same way. |
puls_profile.py |
Decodes factory .puls streams (raw or GF1-headered) into velocity/accel profiles: peak speeds, ramp-slope fits, per-move segments, Z cadence. Runs anywhere (stdlib only). Source of the factory-true grblHAL defaults (milestone 2): 700/590 mm/s² accel, 200 mm/s max rate, 28160 Hz travel tick. |
bench_m2.py |
Milestone-2 motion bench, runs against the board over TCP:23: bounded round-trip jogs (sanity, max-rate, diagonal) + feed-hold/resume mid-move, reporting peak feed, state transitions, and position drift. All-green 2026-08-02 at factory-true settings. |
The build scripts borrow the Yocto cross toolchain + sysroot from the ulfius
2.7.15 work directory in the WSL build tree; if that path ages out after a
bitbake -c clean, point TC at any current target recipe workdir (or build
a proper SDK with bitbake meta-toolchain).