mirror of
https://github.com/openglow-org/forgefirm.git
synced 2026-09-28 17:11:15 -07:00
ScottW514
cd84786fc5
- scripts/bench/tray_test.py, run by the driver's CI: M103 P1 and P0 move Z and its envelope by tray_offset_mm on the lens step grid, tell the sender, write and remove the marker beside the shared config, and ship no step; a missing P, P2, P0.5, P-1, and an axis word are errors that change nothing; the switch behind a move waits for the move; the port's tray op with a sender connected, its count exact, refused out of form, during a program, and at a package's M-code; the mode across a soft reset and a killed controller, a start over the marker taking the lens reference in the tray-out frame; the offset's range; an unreferenced lens; a camera home in both modes handing the runner the same park. The kernel-idle half of the barrier needs the pulse device: a null sink is always idle. - scripts/bench/ctlport_test.py: the dark case carries tray out and in under an open armed window. - forgetest: motion.tray in its own module, suite/tray.py, so no other test's fingerprint moves. It switches the mode both ways through the panel's route and through M103 from a Grbl client and judges each switch: /status's mode, Z, and reach moved by the offset's grid, the port's state, the marker, the reference and its source unchanged, the client told, the kernel's counters unmoved. A jog to the Z the lens read before a switch is refused in the other mode and taken back in the mode found; a setup card started with the tray out is refused in the operator's words; the panel page carries the switch. The mode goes back as found in a finally. It does not restart the controller, which would drop the X and Y reference: persistence is tray_test.py's. - The bench registry and README list tray_test.py. Proof: tray_test.py ALL PASS against the driver with the mode, and six driver copies each missing one part of it fail. The driver's whole CI harness list passes. The forgetest unit suite: 500 tests OK. The coverage lint over the working trees: nothing uncovered, 126 tests. On the bench reference, with the binaries hot-deployed on the fx18 image: motion.tray PASS, and FAIL against the driver whose anchor lost its source word on the second switch. Acceptance. motion.tray is new; the suite and bench files are in no other test's fingerprint.
477 lines
19 KiB
Python
477 lines
19 KiB
Python
#!/usr/bin/env python3
|
|
# Copyright 2026 514 LLC d/b/a OpenGlow
|
|
# Written by Scott Wiederhold
|
|
# https://community.openglow.org
|
|
# SPDX-License-Identifier: MIT
|
|
"""Host-side verification of the crumb tray's mode (glowforge_tray.c).
|
|
|
|
With the tray out the work sits on the floor of the cut area, and Z is the
|
|
focal height above that floor: the Z position and the Z envelope move up by
|
|
tray_offset_mm on the lens step grid (1.35" is 100 half-steps). M103 P1 sets
|
|
the tray out, M103 P0 sets it in, and the controller port's "tray out|in"
|
|
runs the same line for the panel. Runs the native grblHAL_glowforge binary
|
|
in null-sink mode, with GFSINK_DUMP capturing the shipped stream, a scripted
|
|
sender on the Grbl socket, and the port client of ctlport_test.py:
|
|
|
|
1. M103 P1 and P0 shift the reported Z by the offset's whole half-steps,
|
|
tell the sender [MSG:Tray out] and [MSG:Tray in], keep Z referenced,
|
|
write and remove the marker beside the shared config, and ship no
|
|
step tick; asking for the mode already set changes nothing and says so
|
|
2. the envelope moves with the position: with the tray out the ends of
|
|
the lens's reach, shifted, run and two half-steps past them are
|
|
refused, and a jog to a tray-in Z is refused; with the tray in again
|
|
the same jog runs
|
|
3. a missing P, a P other than 0 or 1, and an axis word on the line are
|
|
errors (28, 39, 31) that change nothing
|
|
4. the M-code is a barrier: behind a move it waits for the move to end,
|
|
and the frame changes only once the machine is idle
|
|
5. the port's tray op switches the mode with a sender connected, the
|
|
sender's response count stays exact and it is told the mode; the op
|
|
is refused out of form (error:invalid), during a program
|
|
(busy:state), and while a job waits at a package's M-code
|
|
(busy:mcode)
|
|
6. the mode survives a soft reset, and a controller restart: a start with
|
|
the marker present takes the lens reference in the tray-out frame,
|
|
and one without it in the tray-in frame
|
|
7. tray_offset_mm sets the shift, held to 13 to 60 mm
|
|
8. an unreferenced lens shifts the same way, and stays pinned where it
|
|
reads
|
|
9. a camera home with the tray out declares Z the offset higher, and
|
|
hands the runner the same park: the lens parks in the same place
|
|
|
|
The kernel-idle half of the barrier (the wait a package's M-code makes)
|
|
needs the pulse device: a null sink is always idle.
|
|
|
|
Usage: tray_test.py [path/to/grblHAL_glowforge]
|
|
"""
|
|
import os
|
|
import shutil
|
|
import signal
|
|
import subprocess
|
|
import sys
|
|
import tempfile
|
|
import threading
|
|
import time
|
|
|
|
sys.path.insert(0, os.path.dirname(os.path.abspath(__file__)))
|
|
import ctlport_test as ct # noqa: E402
|
|
|
|
BIN = ct.BIN
|
|
fail = ct.fail
|
|
PORT = 2395
|
|
SPM = 2.922
|
|
EDGE = 3.35 # the edge's grid step is 10
|
|
EDGE_K = 10
|
|
SHIFT_K = 100 # the default offset, 34.29 mm
|
|
DOWN, UP = 10, 12 # the fallback window
|
|
|
|
|
|
def zk(k):
|
|
return k / SPM
|
|
|
|
|
|
class Session:
|
|
"""One null-sink controller over its own state directory. `conf` is the
|
|
shared config; with `referenced` the lens marker forgectrl leaves is
|
|
there, so the controller takes the lens reference at its start."""
|
|
|
|
def __init__(self, conf=None, referenced=True):
|
|
self.workdir = tempfile.mkdtemp(prefix="tray-")
|
|
self.conf = os.path.join(self.workdir, "forgefirm.conf")
|
|
self.dump = os.path.join(self.workdir, "stream.bin")
|
|
self.marker = os.path.join(self.workdir, "tray.out")
|
|
self.write_conf(conf or {})
|
|
if referenced:
|
|
with open(os.path.join(self.workdir, "lens.home"), "w") as f:
|
|
f.write("edge 0 3 3\n")
|
|
verdict = os.path.join(self.workdir, "cooling.state")
|
|
self.stop = threading.Event()
|
|
self.pub = threading.Thread(target=ct.publish_verdicts, args=(verdict, self.stop), daemon=True)
|
|
self.pub.start()
|
|
env = dict(os.environ, GFHOME_CONF=self.conf, GF_STATE_DIR=self.workdir,
|
|
GF_VERDICT_FILE=verdict, GFSINK_DUMP=self.dump, FFLOG_STDERR="1")
|
|
env.pop("GFSINK", None)
|
|
env.pop("GF_SWITCH_FILE", None)
|
|
self.env = env
|
|
self.start()
|
|
|
|
def write_conf(self, conf):
|
|
with open(self.conf, "w") as f:
|
|
f.write("cool_fan_grace_s = 0\nlaser_disarm_s = 1\nlens_hall_edge_z_mm = %.2f\n" % EDGE)
|
|
for k, v in conf.items():
|
|
f.write("%s = %s\n" % (k, v))
|
|
|
|
def start(self):
|
|
self.proc = subprocess.Popen([BIN, "-p", str(PORT)], cwd=self.workdir, env=self.env,
|
|
stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
|
|
self.sender = ct.Sender(PORT)
|
|
path = os.path.join(self.workdir, "grbl.ctl")
|
|
for _ in range(50):
|
|
if os.path.exists(path):
|
|
break
|
|
time.sleep(0.1)
|
|
else:
|
|
fail("the controller did not create %s" % path)
|
|
self.port = ct.PortClient(path)
|
|
# The lens reference is taken on the first pass of the realtime hook.
|
|
time.sleep(0.3)
|
|
|
|
def restart(self, hard):
|
|
"""End the controller (SIGKILL when hard) and start another over the
|
|
same state directory and shared config."""
|
|
self.port.close()
|
|
self.sender.close()
|
|
if hard:
|
|
self.proc.kill()
|
|
else:
|
|
self.proc.send_signal(signal.SIGINT)
|
|
self.proc.wait(10)
|
|
self.start()
|
|
|
|
def state(self):
|
|
return self.port.state()
|
|
|
|
def z(self):
|
|
return self.state()["mpos"][2]
|
|
|
|
def tray(self):
|
|
return self.state()["tray"]
|
|
|
|
def ticks(self):
|
|
"""Step ticks shipped so far (a byte with bit 7 set is a power byte)."""
|
|
try:
|
|
with open(self.dump, "rb") as f:
|
|
data = f.read()
|
|
except OSError:
|
|
return 0
|
|
return sum(1 for b in data if not b & 0x80 and b & 0x25)
|
|
|
|
def messages(self, text, want=None):
|
|
"""How many [MSG:<text>] lines the sender has had. With `want`, wait
|
|
up to a second for that many: the port answers at once, and the
|
|
sender's lines go out on the controller's next pass."""
|
|
end = time.time() + (1.0 if want is not None else 0)
|
|
while True:
|
|
n = self.sender.saw("[MSG:%s]" % text)
|
|
if want is None or n >= want or time.time() > end:
|
|
return n
|
|
time.sleep(0.02)
|
|
|
|
def quiet(self):
|
|
time.sleep(0.45)
|
|
|
|
def close(self):
|
|
self.port.close()
|
|
self.sender.close()
|
|
self.proc.send_signal(signal.SIGINT)
|
|
try:
|
|
self.proc.wait(5)
|
|
except subprocess.TimeoutExpired:
|
|
self.proc.kill()
|
|
self.stop.set()
|
|
self.pub.join(2)
|
|
shutil.rmtree(self.workdir, ignore_errors=True)
|
|
|
|
|
|
def expect_z(s, k, what):
|
|
z = s.z()
|
|
if abs(z - zk(k)) > 0.002:
|
|
fail("[%s] Z reads %.3f, not %.3f (%d half-steps)" % (what, z, zk(k), k))
|
|
|
|
|
|
def refused(s, line):
|
|
"""Send a line that must be refused, and return its error, acknowledged
|
|
with an empty line (the core holds a parser error against the next
|
|
g-code line until then)."""
|
|
r = s.sender.send(line)
|
|
if r.startswith("error"):
|
|
if s.sender.send("") != "ok":
|
|
fail("the empty line that acknowledges %s did not get ok" % r)
|
|
return r
|
|
return None
|
|
|
|
|
|
def jog_to(s, k):
|
|
"""An absolute jog to half-step k: its response."""
|
|
r = s.sender.send("$J=G90 G21 Z%.4f F200" % zk(k))
|
|
if r == "ok":
|
|
s.sender.wait_state("Idle")
|
|
elif s.sender.send("") != "ok":
|
|
fail("the empty line after a refused jog did not get ok")
|
|
return r
|
|
|
|
|
|
def test_switch(s):
|
|
expect_z(s, EDGE_K, "switch")
|
|
st = s.state()
|
|
if st["tray"] != "in" or not st["homed"] & 4:
|
|
fail("[switch] not tray in with Z referenced at the start: %r" % st)
|
|
ticks = s.ticks()
|
|
if s.sender.send("M103 P1") != "ok":
|
|
fail("[switch] M103 P1 was refused")
|
|
st = s.state()
|
|
if st["tray"] != "out" or not st["homed"] & 4:
|
|
fail("[switch] not tray out with Z referenced after M103 P1: %r" % st)
|
|
expect_z(s, EDGE_K + SHIFT_K, "switch")
|
|
if not s.messages("Tray out", 1):
|
|
fail("[switch] the sender was not told [MSG:Tray out]")
|
|
if not os.path.exists(s.marker):
|
|
fail("[switch] M103 P1 left no marker beside the shared config")
|
|
if s.sender.send("M103 P1") != "ok" or s.tray() != "out":
|
|
fail("[switch] a second M103 P1 was refused or changed the mode")
|
|
expect_z(s, EDGE_K + SHIFT_K, "switch: the mode already set")
|
|
if s.messages("Tray out", 2) != 2:
|
|
fail("[switch] the mode already set was not told again")
|
|
if s.sender.send("M103 P0") != "ok" or s.tray() != "in":
|
|
fail("[switch] M103 P0 did not set the tray in")
|
|
expect_z(s, EDGE_K, "switch: back in")
|
|
if os.path.exists(s.marker) or not s.messages("Tray in", 1):
|
|
fail("[switch] M103 P0 left the marker or did not tell the sender")
|
|
time.sleep(0.3)
|
|
if s.ticks() != ticks:
|
|
fail("[switch] the switches shipped %d step ticks" % (s.ticks() - ticks))
|
|
print("PASS [switch]: M103 P1 moved Z up %d half-steps and P0 back, the sender was told, the "
|
|
"marker followed, and no step shipped" % SHIFT_K)
|
|
|
|
|
|
def test_envelope(s):
|
|
s.sender.send("M103 P1")
|
|
base = EDGE_K + SHIFT_K
|
|
for k, want, what in ((base + UP, "ok", "the top of the reach"),
|
|
(base + UP + 2, "error:15", "two half-steps over the top"),
|
|
(base - DOWN, "ok", "the bottom of the reach"),
|
|
(base - DOWN - 2, "error:15", "two half-steps under the bottom"),
|
|
(EDGE_K + UP, "error:15", "a tray-in Z")):
|
|
r = jog_to(s, k)
|
|
if r != want:
|
|
fail("[envelope] tray out: a jog to %s (Z %.3f) got %r, not %s" % (what, zk(k), r, want))
|
|
if jog_to(s, base) != "ok":
|
|
fail("[envelope] the jog back to the edge was refused")
|
|
s.sender.send("M103 P0")
|
|
expect_z(s, EDGE_K, "envelope")
|
|
if jog_to(s, EDGE_K + UP) != "ok":
|
|
fail("[envelope] tray in: the jog to the same tray-in Z was refused")
|
|
if jog_to(s, EDGE_K) != "ok":
|
|
fail("[envelope] the jog back to the edge was refused")
|
|
print("PASS [envelope]: with the tray out the shifted reach ran to its ends, past them and a "
|
|
"tray-in Z were refused; with the tray in the tray-in Z ran")
|
|
|
|
|
|
def test_errors(s):
|
|
ticks = s.ticks()
|
|
for line, want in (("M103", "error:28"), ("M103 P2", "error:39"), ("M103 P0.5", "error:39"),
|
|
("M103 P-1", "error:39"), ("M103 P1 Z5", "error:31"), ("M103 P1 X5", "error:31")):
|
|
r = refused(s, line)
|
|
if r != want:
|
|
fail("[errors] %r got %r, not %s" % (line, r, want))
|
|
if s.tray() != "in" or os.path.exists(s.marker):
|
|
fail("[errors] %r changed the mode" % line)
|
|
expect_z(s, EDGE_K, "errors")
|
|
time.sleep(0.3)
|
|
if s.ticks() != ticks:
|
|
fail("[errors] the refused lines shipped %d step ticks" % (s.ticks() - ticks))
|
|
print("PASS [errors]: a missing P, P2, P0.5, P-1 and an axis word were refused and changed nothing")
|
|
|
|
|
|
def test_barrier(s):
|
|
"""Behind a move the switch waits for it to end."""
|
|
x0 = s.state()["mpos"][0]
|
|
s.sender.send("G91 G1 X10 F300") # about two seconds
|
|
n = s.sender.count()
|
|
s.sender.sock.sendall(b"M103 P1\n")
|
|
seen_run = False
|
|
end = time.time() + 10
|
|
while time.time() < end:
|
|
st = s.port.state()
|
|
if st["state"] == "Run":
|
|
seen_run = True
|
|
if st["tray"] != "in" or abs(st["mpos"][2] - zk(EDGE_K)) > 0.002:
|
|
fail("[barrier] the frame changed while the move before M103 ran: %r" % st)
|
|
if st["tray"] == "out":
|
|
break
|
|
time.sleep(0.05)
|
|
if not seen_run:
|
|
fail("[barrier] the move was never seen running, so the case proves nothing")
|
|
st = s.port.state()
|
|
if st["tray"] != "out" or st["state"] != "Idle" or abs(st["mpos"][0] - x0 - 10) > 0.01:
|
|
fail("[barrier] the switch did not land after the move ended: %r" % st)
|
|
for _ in range(100):
|
|
if s.sender.count() > n:
|
|
break
|
|
time.sleep(0.05)
|
|
s.sender.send("G90")
|
|
s.sender.send("M103 P0")
|
|
print("PASS [barrier]: M103 behind a move changed the frame only once the move had ended")
|
|
|
|
|
|
def test_port(s):
|
|
s.sender.wait_state("Idle")
|
|
s.quiet()
|
|
before = s.sender.count()
|
|
told = s.messages("Tray out")
|
|
r = s.port.request("tray out")
|
|
if r != "ok" or s.tray() != "out":
|
|
fail("[port] tray out got %r" % r)
|
|
expect_z(s, EDGE_K + SHIFT_K, "port")
|
|
if s.port.request("tray out") != "ok":
|
|
fail("[port] a second tray out was refused")
|
|
if s.messages("Tray out", told + 2) != told + 2:
|
|
fail("[port] the sender was not told the mode each time")
|
|
if s.port.request("tray sideways") != "error:invalid":
|
|
fail("[port] a tray op out of form was not refused")
|
|
if s.sender.count() != before:
|
|
fail("[port] the sender got %d responses for the port's tray ops" % (s.sender.count() - before))
|
|
|
|
s.sender.send("G91 G1 X-10 F300")
|
|
time.sleep(0.4)
|
|
r = s.port.request("tray in")
|
|
if r != "busy:state" or s.tray() != "out":
|
|
fail("[port] tray in during a program got %r" % r)
|
|
s.sender.wait_state("Idle")
|
|
s.sender.send("G90")
|
|
|
|
if s.port.request("mcodes 160") != "ok":
|
|
fail("[port] the M-code table was refused")
|
|
n = s.sender.count()
|
|
s.sender.sock.sendall(b"M160 P1\n")
|
|
for _ in range(100):
|
|
st = s.state()
|
|
if st.get("mcode"):
|
|
break
|
|
time.sleep(0.05)
|
|
else:
|
|
fail("[port] no M-code waits: %r" % s.state())
|
|
r = s.port.request("tray in")
|
|
if r != "busy:mcode" or s.tray() != "out":
|
|
fail("[port] tray in while a job waits at an M-code got %r" % r)
|
|
if s.port.request("mcode_result %d ok" % st["mcode"]["seq"]) != "ok":
|
|
fail("[port] the M-code's answer was refused")
|
|
for _ in range(100):
|
|
if s.sender.count() > n:
|
|
break
|
|
time.sleep(0.05)
|
|
s.port.request("mcodes -")
|
|
s.quiet()
|
|
before = s.sender.count()
|
|
if s.port.request("tray in") != "ok" or s.tray() != "in":
|
|
fail("[port] tray in was refused")
|
|
expect_z(s, EDGE_K, "port")
|
|
if s.sender.count() != before or s.sender.send("G0 X0") != "ok":
|
|
fail("[port] the sender's count was disturbed by the tray op")
|
|
s.sender.wait_state("Idle")
|
|
print("PASS [port]: tray out and in through the port with a sender connected, its count exact "
|
|
"and the mode told; refused out of form, during a program, and at a package's M-code")
|
|
|
|
|
|
def test_persistence(s):
|
|
s.sender.send("M103 P1")
|
|
s.sender.realtime(b"\x18")
|
|
time.sleep(1.0)
|
|
s.sender.send("$X")
|
|
if s.tray() != "out":
|
|
fail("[persistence] a soft reset set the tray in")
|
|
expect_z(s, EDGE_K + SHIFT_K, "persistence: soft reset")
|
|
s.restart(hard=True)
|
|
st = s.state()
|
|
if st["tray"] != "out" or not st["homed"] & 4:
|
|
fail("[persistence] a restart over the marker came up %r" % st)
|
|
expect_z(s, EDGE_K + SHIFT_K, "persistence: restart with the tray out")
|
|
if jog_to(s, EDGE_K + SHIFT_K + UP) != "ok" or jog_to(s, EDGE_K + UP) != "error:15":
|
|
fail("[persistence] the restarted controller's envelope is not the tray-out one")
|
|
jog_to(s, EDGE_K + SHIFT_K)
|
|
if s.port.request("tray in") != "ok":
|
|
fail("[persistence] tray in was refused after the restart")
|
|
expect_z(s, EDGE_K, "persistence: in after the restart")
|
|
s.restart(hard=False)
|
|
if s.tray() != "in":
|
|
fail("[persistence] a restart with no marker came up tray out")
|
|
expect_z(s, EDGE_K, "persistence: restart with the tray in")
|
|
print("PASS [persistence]: the tray out survived a soft reset and a controller kill, the new "
|
|
"controller referenced Z in the tray-out frame, and a start with no marker in the tray-in frame")
|
|
|
|
|
|
def test_offset():
|
|
for key, k in (("20", 58), ("5", 38), ("99", 175)):
|
|
s = Session(conf={"tray_offset_mm": key})
|
|
try:
|
|
s.sender.send("M103 P1")
|
|
expect_z(s, EDGE_K + k, "offset %s" % key)
|
|
s.sender.send("M103 P0")
|
|
expect_z(s, EDGE_K, "offset %s: back in" % key)
|
|
finally:
|
|
s.close()
|
|
print("PASS [offset]: tray_offset_mm 20 moved Z 58 half-steps, 5 was held to 13 mm (38), "
|
|
"99 to 60 mm (175)")
|
|
|
|
|
|
def test_unreferenced():
|
|
s = Session(referenced=False)
|
|
try:
|
|
z0 = s.z()
|
|
k0 = round(z0 * SPM)
|
|
s.sender.send("M103 P1")
|
|
expect_z(s, k0 + SHIFT_K, "unreferenced")
|
|
for step in ("1", "-1"):
|
|
r = s.sender.send("$J=G91 G21 Z%s F200" % step)
|
|
if r != "error:15":
|
|
fail("[unreferenced] a Z jog of %s got %r: the pinned envelope did not follow" % (step, r))
|
|
s.sender.send("")
|
|
s.sender.send("M103 P0")
|
|
expect_z(s, k0, "unreferenced: back in")
|
|
finally:
|
|
s.close()
|
|
print("PASS [unreferenced]: an unreferenced lens shifted the same way and stayed pinned where it read")
|
|
|
|
|
|
def test_camera_home():
|
|
s = Session(conf={"homing_mode": "gfcloud"})
|
|
park = os.path.join(s.workdir, "park.log")
|
|
s.write_conf({"homing_mode": "gfcloud", "gfcloud_home_cmd": "echo $GFHOME_PARK_HALF_STEPS >> %s" % park})
|
|
try:
|
|
z = {}
|
|
for mode in ("P0", "P1"):
|
|
s.sender.send("M103 " + mode)
|
|
if s.sender.send("$H") != "ok":
|
|
fail("[camera-home] $H with M103 %s was refused" % mode)
|
|
s.sender.wait_state("Idle")
|
|
z[mode] = s.z()
|
|
with open(park) as f:
|
|
parks = f.read().split()
|
|
if len(parks) != 2 or parks[0] != parks[1]:
|
|
fail("[camera-home] the runner was handed parks %r, not the same one twice" % parks)
|
|
k = EDGE_K + int(parks[0])
|
|
if abs(z["P0"] - zk(k)) > 0.002 or abs(z["P1"] - zk(k + SHIFT_K)) > 0.002:
|
|
fail("[camera-home] Z after the homes read %r, not %.3f and %.3f" % (z, zk(k), zk(k + SHIFT_K)))
|
|
if jog_to(s, EDGE_K + SHIFT_K + UP) != "ok" or jog_to(s, EDGE_K + UP) != "error:15":
|
|
fail("[camera-home] the envelope after a tray-out home is not the tray-out one")
|
|
s.sender.send("M103 P0")
|
|
finally:
|
|
s.close()
|
|
print("PASS [camera-home]: the park handed to the runner was %s half-steps in both modes, and Z "
|
|
"after the home read %.3f tray in, %.3f tray out" % (parks[0], z["P0"], z["P1"]))
|
|
|
|
|
|
def main():
|
|
if not os.path.exists(BIN):
|
|
fail("no controller binary at %s" % BIN)
|
|
s = Session()
|
|
try:
|
|
if s.sender.send("$102") != "ok" or not s.sender.saw("$102=2.922"):
|
|
fail("$102 is not 2.922: this harness needs the default")
|
|
test_switch(s)
|
|
test_envelope(s)
|
|
test_errors(s)
|
|
test_barrier(s)
|
|
test_port(s)
|
|
test_persistence(s)
|
|
finally:
|
|
s.close()
|
|
test_offset()
|
|
test_unreferenced()
|
|
test_camera_home()
|
|
print("ALL PASS")
|
|
|
|
|
|
if __name__ == "__main__":
|
|
main()
|