mirror of
https://github.com/openglow-org/forgefirm.git
synced 2026-10-16 01:29:55 -07:00
ScottW514
dfd32d5fd1
FORGEFIRM_RELEASE is 0.0.8, and releases/v0.0.8 carries the release notes and the acceptance artifact that forgetest exported on the bench reference. The artifact is from campaign c-20261010224522-439d on the pins-only dev image 20261010224118: authorized, 128 of 128 tests satisfied, 48 run on that image and 80 inherited. scripts/acceptance-gate.py against that build's release manifest gives AUTHORIZED, with inputs identical to the bench image.
8 lines
702 B
Markdown
8 lines
702 B
Markdown
ForgeFIRM v0.0.8 is a beta release.
|
|
|
|
Machines with one intake fan: some Glowforge machines are built with a single intake fan instead of two. On those machines, the Airflow step of setup stopped with an error because the second fan never turned. Setup now detects a single intake fan, tells you so, and finishes. The second intake is then not checked while the machine runs. Machines with two intake fans work as before.
|
|
|
|
Expect bugs. When you find one, open an issue in this repository or report it on the community forum at https://community.openglow.org so it can be fixed.
|
|
|
|
Every release below 0.1.0 is a beta release. Installation, usage, and safety are documented at https://docs.forgefirm.org/.
|