mirror of
https://github.com/openglow-org/forgefirm.git
synced 2026-09-27 16:51:12 -07:00
114 lines
3.5 KiB
Python
114 lines
3.5 KiB
Python
#!/usr/bin/env python3
|
|
# Copyright 2026 514 LLC d/b/a OpenGlow
|
|
# Written by Scott Wiederhold
|
|
# https://community.openglow.org
|
|
# SPDX-License-Identifier: MIT
|
|
"""Bench drill for the starved-re-check escalation path.
|
|
|
|
Runs ON THE BOARD with the controller running. The cooling engine's
|
|
confirmation budget (`cool_confirm_max_s`, re-read at every run start)
|
|
is set to a short value for the drill through forgectrl's settings and
|
|
restored afterward. With the pump off, the job-start check reads
|
|
over-limit -> SUSPECT; the cooked stagnant loop then cannot pass the
|
|
settle gate within the budget, so it expires and the engine must
|
|
escalate: "COOLANT FLOW FAULT: no clean re-check within N s".
|
|
|
|
Usage: flow_escalate_drill.py [budget_s] (default 60, the setting's minimum)
|
|
Prints PASS/FAIL and leaves the machine idle: M9 sent, pump on,
|
|
heater off, the budget setting as it was.
|
|
"""
|
|
import select
|
|
import socket
|
|
import sys
|
|
import time
|
|
|
|
from gfbench import forgectrl_post, setting
|
|
|
|
BUDGET_S = int(sys.argv[1]) if len(sys.argv) > 1 else 60
|
|
T0 = time.monotonic()
|
|
|
|
|
|
def el():
|
|
return time.monotonic() - T0
|
|
|
|
|
|
def log(msg):
|
|
print('%7.1f %s' % (el(), msg), flush=True)
|
|
|
|
|
|
def pump(on):
|
|
with open('/sys/glowforge/thermal/water_pump_on', 'w') as f:
|
|
f.write('1' if on else '0')
|
|
log('** pump -> %s' % ('ON' if on else 'OFF'))
|
|
|
|
|
|
s = socket.create_connection(('127.0.0.1', 23), timeout=5)
|
|
s.setblocking(False)
|
|
buf = b''
|
|
|
|
|
|
def wait_msg(substrs, deadline):
|
|
global buf
|
|
while el() < deadline:
|
|
r, _, _ = select.select([s], [], [], 0.2)
|
|
if not r:
|
|
continue
|
|
data = s.recv(4096)
|
|
if data:
|
|
buf += data
|
|
while b'\n' in buf:
|
|
line, buf = buf.split(b'\n', 1)
|
|
line = line.strip().decode('ascii', 'replace')
|
|
if line.startswith('[MSG'):
|
|
log('<< ' + line)
|
|
for m in substrs:
|
|
if m in line:
|
|
return line
|
|
return None
|
|
|
|
|
|
budget_was = setting('cool_confirm_max_s') # None = not set (compiled default)
|
|
st, body = forgectrl_post('/settings', data={'cool_confirm_max_s': str(BUDGET_S)})
|
|
if st != 200:
|
|
log('!! could not set cool_confirm_max_s=%d (POST /settings -> %s %s)' % (BUDGET_S, st, body))
|
|
s.close()
|
|
sys.exit(2)
|
|
log('cool_confirm_max_s=%d for the drill (was %s)' % (BUDGET_S, budget_was or 'unset'))
|
|
|
|
ok = True
|
|
try:
|
|
time.sleep(0.5)
|
|
pump(False)
|
|
log('--- M8 with the pump off')
|
|
s.sendall(b'M8\n')
|
|
|
|
if wait_msg(['FLOW SUSPECT'], el() + 180) is None:
|
|
log('!! no SUSPECT within 180 s')
|
|
ok = False
|
|
elif wait_msg(['no clean re-check within'], el() + BUDGET_S + 75) is None:
|
|
log('!! no escalation FAULT within %d s of the suspect' % (BUDGET_S + 75))
|
|
ok = False
|
|
finally:
|
|
try:
|
|
if budget_was is None:
|
|
st, _ = forgectrl_post('/settings', params={'cool_confirm_max_s': ''})
|
|
else:
|
|
st, _ = forgectrl_post('/settings', data={'cool_confirm_max_s': str(budget_was)})
|
|
log('cool_confirm_max_s restored to %s (-> %s)' % (budget_was or 'unset', st))
|
|
except OSError as e:
|
|
log('!! could not restore cool_confirm_max_s: %s' % e)
|
|
ok = False
|
|
try:
|
|
s.sendall(b'M9\n')
|
|
time.sleep(1.0)
|
|
except OSError:
|
|
pass
|
|
s.close()
|
|
pump(True)
|
|
with open('/sys/glowforge/thermal/heater_pwm', 'w') as f:
|
|
f.write('0')
|
|
log('--- M9 sent, pump on, heater off')
|
|
|
|
print('ESCALATION DRILL %s' % ('COMPLETE' if ok else 'FAILED'), flush=True)
|
|
sys.exit(0 if ok else 1)
|