Release v0.0.6

The cooling engine publishes its state once a tick (1 Hz). A /cool/status
read inside the tick after a run ended still shows the run: while a
diagnostic owns the hardware every tick publishes phase "diag" with the
hold set, and a fail tier's hold stands until the tick that ends its
session. The baseline took one read, and by its rule an arm or a hold is
the run's doing, so a test that finished inside that second failed its
hand-back on a hold the engine's next tick cleared.

Seen on the bench reference twice. cooling.aa-offset-calibrate in campaign
c-20260919215024-c402: the diagnostic reported done at 22:07:14 with its
offset measured (15.7 counts, spread 0.7), and the hand-back at 22:07:15
read "cool=diag/armed=False/hold=True ... -> waited" and failed the run;
the test had passed on five images before, the last one earlier the same
day. cooling.fail-tier-stop in c-20260919202934-3d3a, the same way on the
crash fault's hold (0ceb4ab made that test wait for its own fault; this is
the general case).

The cooling check moves into Baseline._cool_side. An arm or a hold is read
again for up to COOL_PUBLISH_S (2.5 s: two ticks and a margin) before it is
called the run's doing. One the next tick cleared is logged as the engine's
last word on the run and judged on what the engine reads then: idle is
clean, a cooldown phase is waited out as the engine's own post-job work. A
hold a run did leave stands for a job that is never coming back, so it is
still there after the tick and is recorded, stood down and failed exactly
as before; a hold that clears only later is still a leftover ("waited").

Proven: tests/test_baseline.py CoolPublishTests - a diagnostic's hold the
next tick clears, a fail tier's hold clearing into the smoke phase, a hold
that outlives the tick (recorded, machine stood down), a hold that clears
only later (recorded as waited), an idle engine and a silent daemon; the
baseline, queue, operator, mode, responsiveness and server host tests
pass under Linux. baseline.py is not a suite module, so no test's
fingerprint moves with it.

.gitattributes

@@ -0,0 +1,4 @@
+# Every text file is stored and checked out with LF; a patch keeps its bytes.
+* text=auto eol=lf
+*.patch -text
+*.diff -text

.github/workflows/fixture-ci.yml

@@ -11,6 +11,7 @@ name: fixture-ci
 
 on:
   push:
+    branches: [master]
     paths:
       - 'fixture/**'
       - '.github/workflows/fixture-ci.yml'

.github/workflows/forgetest-ci.yml

@@ -20,6 +20,7 @@ name: forgetest-ci
 
 on:
   push:
+    branches: [master]
     paths:
       - 'forgetest/**'
       - 'scripts/acceptance-gate.py'

AGENTS.md

@@ -45,6 +45,8 @@ contributor is welcome to read it too: it is the same set of rules.
   chain of others.
 - Never exercise a gate or a limit through the `GFCOOL_*` environment
   overrides in a test. Use the settings API, and restore it in the teardown.
+- A silence-while-armed injection and a crash during `$H` are catalog
+  drills, not one-off bench scripts.
 
 ### CI couplings that set the push order
 
@@ -186,6 +188,9 @@ does.
   test with the fix, in the same commit, never after.
 - Position counters, homing anchors, and a homed flag are not proof of
   physical motion. The head accelerometer is, and so are the operator's eyes.
+- Unreadable is fail-closed. A failed read of a safety input, a state file,
+  or a verdict is never treated as "still running" or "keep waiting" without
+  a bound.
 
 ### Proof before done
 
@@ -320,7 +325,11 @@ docstrings, log and console text, commit messages, issue text, and replies.
   comment style of the file: `Copyright <year> 514 LLC d/b/a OpenGlow` and
   `Written by Scott Wiederhold`. Keep the year, or the year range, that
   the file already has. The copyright notices of other holders stay
-  unchanged.
+  unchanged. Those two lines are for files this project authors: an
+  outside contributor who writes a new file puts their own name there, or
+  leaves the lines out, and keeps their copyright in what they wrote.
+  Editing an existing file changes no header - a contribution is recorded
+  by its `Signed-off-by` line and by git, not by a copyright line.
 - **SPDX.** Every new source file carries an `SPDX-License-Identifier` line
   under the license of its repository.
 

CONTRIBUTING.md

@@ -0,0 +1,54 @@
+# Contributing
+
+Patches are welcome. How the project works, what proof a change needs, and the
+writing rules are on the documentation site:
+<https://docs.forgefirm.org/developers/contributing/>.
+
+## Sign your work
+
+Every commit carries a `Signed-off-by` line:
+
+    Signed-off-by: Your Name <your.email@example.com>
+
+`git commit -s` adds it, using your `user.name` and `user.email`. Use your real
+name; an anonymous or pseudonymous sign-off certifies nothing.
+
+The line certifies the Developer Certificate of Origin, version 1.1, below. It
+is the same statement the Linux kernel and grblHAL use. It is not a copyright
+assignment: you keep the copyright in what you write, and your contribution
+comes in under the license of the repository you are contributing to.
+
+You do not add a copyright line for a patch. A change to an existing file
+leaves its header alone. If you write a whole new file, put your own name in
+its copyright line, or leave the line out; either way the file carries an
+`SPDX-License-Identifier` for the repository's license.
+
+## Developer Certificate of Origin 1.1
+
+    By making a contribution to this project, I certify that:
+
+    (a) The contribution was created in whole or in part by me and I
+        have the right to submit it under the open source license
+        indicated in the file; or
+
+    (b) The contribution is based upon previous work that, to the best
+        of my knowledge, is covered under an appropriate open source
+        license and I have the right under that license to submit that
+        work with modifications, whether created in whole or in part
+        by me, under the same open source license (unless I am
+        permitted to submit under a different license), as indicated
+        in the file; or
+
+    (c) The contribution was provided directly to me by some other
+        person who certified (a), (b) or (c) and I have not modified
+        it.
+
+    (d) I understand and agree that this project and the contribution
+        are public and that a record of the contribution (including all
+        personal information I submit with it, including my sign-off) is
+        maintained indefinitely and may be redistributed consistent with
+        this project or the open source license(s) involved.
+
+Copyright (C) 2004, 2006 The Linux Foundation and its contributors.
+This DCO text is licensed under the terms of the Creative Commons
+Attribution-ShareAlike 3.0 Unported license.

LICENSE

@@ -5,5 +5,14 @@ the associated recipe (.bb file) unless otherwise stated.
 See:
 COPYING.MIT (MIT)
 
+The code in this repository that is not layer metadata is MIT licensed:
+
+  forgetest/    the release acceptance tool (see forgetest/LICENSE)
+  scripts/      the release, install and bench scripts
+  fixture/      the bench actuator firmware, excluding
+                fixture/managed_components/, which carries its own licenses
+
+Every file in those directories states MIT in its own header.
+
 License information for any other files is either explicitly stated
 or defaults to GPL version 2.

README.md

@@ -83,4 +83,5 @@ before you install.
 **This is experimental software. Use of it could seriously maim or kill you or
 others, and it may void your warranty. Use it at your own risk.**
 
-This project is not affiliated with or endorsed by Glowforge.
+Glowforge is a trademark of Glowforge, Inc. This project is not affiliated
+with, authorized by, or endorsed by Glowforge, Inc.

fixture/fixture.sh

@@ -1,4 +1,8 @@
 #!/usr/bin/env bash
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
 # forgefixture: build, flash and watch the bench actuator's firmware.
 #
 #   ./fixture.sh env              fixture.env from the example, with a fresh API key

fixture/main/version.h

@@ -1,3 +1,8 @@
+/*
+ * Copyright 2026 514 LLC d/b/a OpenGlow
+ * Written by Scott Wiederhold
+ * SPDX-License-Identifier: MIT
+ */
 /* forgefixture firmware version, reported by GET /. */
 #pragma once
 

fixture/test/run.sh

@@ -1,4 +1,8 @@
 #!/bin/sh
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
 # The host test of the fixture's policy: needs only a C compiler.
 set -e
 cd "$(dirname "$0")"

forgetest/LICENSE

@@ -0,0 +1,23 @@
+ForgeFIRM release acceptance tool (forgetest/) and the bench scripts it
+drives (scripts/bench/).
+
+Copyright 2026 514 LLC d/b/a OpenGlow
+Written by Scott Wiederhold
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is furnished
+to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

forgetest/forgetest.init

@@ -1,4 +1,8 @@
 #!/bin/sh
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
 ### BEGIN INIT INFO
 # Provides:          forgetest
 # Required-Start:    $network forgectrl
@@ -22,13 +26,13 @@ case "$1" in
   start)
     echo "Starting forgetest"
     mkdir -p "$DATA"
-    # The bench seed: the commissioning override lifts the wizard part of
+    # The bench seed: the setup override lifts the wizard part of
     # the controller gate until the next reboot (/run is tmpfs), so a
     # campaign runs on a machine whose required wizards are not complete.
     # Nothing lifts the agreements or the account: the bench accepts them
     # once, and that stays in /data.
     mkdir -p /run/forgefirm
-    : > /run/forgefirm/commissioning-override
+    : > /run/forgefirm/setup-override
     start-stop-daemon -S -q -p $PIDFILE -m -b -x /bin/sh -- -c \
       "exec /usr/bin/python3 -m forgetest >> $LOG 2>&1"
     ;;

forgetest/forgetest/__init__.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """forgetest - the ForgeFIRM release acceptance tool.
 
 A daemon on the dev image (HTTP :8090) that runs the acceptance catalog

forgetest/forgetest/__main__.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """forgetest daemon entry point.
 
   python3 -m forgetest [--port 8090] [--host ::] [--manifest PATH]

forgetest/forgetest/artifact.py

@@ -1,5 +1,15 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The release artifact (acceptance.json / acceptance.md) and its verification.
 
+Every test record is redacted before it enters the artifact (redact.py), so
+the committed file carries no identity of the machine that ran the campaign.
+It happens inside build(), ahead of the self-hash, because verify() rejects a
+file edited after the fact. The gate reads none of the redacted fields.
+
 The exporter serializes the campaign state with, for every catalog test,
 the winning result record (same-campaign PASS or inherited PASS, with its
 origin) and the fingerprint it was recorded under. The gate
@@ -15,6 +25,7 @@ from . import VERSION
 from . import campaign as _campaign
 from . import manifest as _manifest
 from .log import now_ts
+from .redact import scrub
 
 FORMAT = 1
 _RESULT_KEYS = ("ts", "campaign", "test", "result", "fingerprint", "manifest_sha", "image",
@@ -47,7 +58,7 @@ def build(state, tests, manifest, records, catalog_hash):
             "fingerprint": st["fingerprint"],
             "satisfied": st["satisfied"],
             "inherited": st["status"] == "inherited",
-            "record": _record(rec) if rec else None,
+            "record": scrub(_record(rec)) if rec else None,
         })
         tests_out.append(entry)
 

forgetest/forgetest/baseline.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The fresh-boot idle state: what every test starts from and leaves behind.
 
 The runner checks the machine against this baseline before a run and
@@ -48,7 +53,7 @@ from .log import now_ts
 # in the pulse path (a job's Z moves the lens; the driver's Z soft limit
 # guards it), step_freq its machine tick and ramp_rate the kernel stop
 # ramp, both derived from the XY microstep mode (the values here are the
-# x8 default's; fixed_sysfs() gives the mode's); streaming is only ever 1
+# x8 base; fixed_sysfs() gives the mode's); streaming is only ever 1
 # inside a live job; the head white LED is a camera lamp, off at idle; the
 # loop heater and TEC are the diagnostics' tools, off at idle.
 FIXED_SYSFS = [
@@ -133,6 +138,7 @@ BOOT_MAX_AGE_S = 600                # a boot reference is taken only this soon a
 SETTLE_S = 150                      # the supervisor's probe + rail-off ladder
 CAM_IDLE_S = 20                     # camera engine idle stop is 10 s
 COOL_IDLE_S = 120                   # cooldown after motion
+COOL_PUBLISH_S = 2.5                # the engine publishes once a tick (1 Hz): two ticks and a margin
 IDLE_S = 30                         # cnc/state back to idle after a job
 GRBL_PORT_S = 30                    # the Grbl port after the supervisor reports grblHAL running
 
@@ -147,11 +153,12 @@ RETURN_MAX_MM = 100.0               # a displaced head is jogged back at most th
 POSITION_DEADBAND_MM = 0.1
 
 # The XY microstep mode (the xy_microsteps setting: 8, 16 or 32; unset =
-# 8). The GRBL controller reads it at its start and derives its scale,
+# 32). The GRBL controller reads it at its start and derives its scale,
 # its machine tick and the kernel stop ramp from it (boards/glowforge.h):
 # the fixed values of x/y_mode, step_freq and ramp_rate are the mode's.
 XY_MODES = (8, 16, 32)
-XY_MODE_DEFAULT = 8
+XY_MODE_BASE = 8                                                 # the factory x8 reference the tick and ramp scale from
+XY_MODE_DEFAULT = 32                                             # the mode an unset or invalid setting reads as
 XY_STEPS_PER_MM_OF = {8: 53.333, 16: 106.667, 32: 213.333}     # $100/$101 per mode
 XY_TICK_X8_HZ = 28160                                            # the x8 machine tick
 XY_RAMP_X8_HZ_PER_S = 125000                                     # the kernel stop ramp at it
@@ -175,7 +182,7 @@ def fixed_sysfs(mode=XY_MODE_DEFAULT):
     """FIXED_SYSFS with the mode's own x/y_mode, step_freq and ramp_rate:
     the tick and the ramp scale with the mode (x16 doubles both, x32
     quadruples them)."""
-    k = mode // XY_MODE_DEFAULT
+    k = mode // XY_MODE_BASE
     own = {"cnc/x_mode": str(mode), "cnc/y_mode": str(mode),
            "cnc/step_freq": str(XY_TICK_X8_HZ * k),
            "cnc/ramp_rate": str(XY_RAMP_X8_HZ_PER_S * k)}
@@ -217,17 +224,25 @@ def read_position():
         return None
 
 
-def position_quantized(was, now):
+def counter_steps_per_mm():
+    """The scale of the X/Y position counters: the kernel counts the
+    microsteps of the mode it runs (cnc/x_mode), so x16 and x32 count two
+    and four times the x8 steps for the same millimeter. The x8 scale when
+    the attribute is unreadable."""
+    return XY_STEPS_PER_MM_OF.get(hw.sysfs_int("cnc/x_mode"), XY_STEPS_PER_MM)
+
+
+def position_quantized(was, now, spm=XY_STEPS_PER_MM):
     """True when two step-counter readings differ by no more than the
     dead band on X and Y and not at all on Z: the step quantization of a
     move that landed where it meant to, rather than a leftover. A cancel
     that returns the head to the job start lands within a few hundredths
     of a millimeter, which is a step or four, and whether that rounds to
-    the same integer is chance."""
+    the same integer is chance. spm is the counters' scale (the mode's)."""
     if was is None or now is None or now[2] != was[2]:
         return False
-    return (abs(now[0] - was[0]) / XY_STEPS_PER_MM <= POSITION_DEADBAND_MM and
+    return (abs(now[0] - was[0]) / spm <= POSITION_DEADBAND_MM and
-            abs(now[1] - was[1]) / XY_STEPS_PER_MM <= POSITION_DEADBAND_MM)
+            abs(now[1] - was[1]) / spm <= POSITION_DEADBAND_MM)
 
 
 def read_ring_residue():
@@ -321,7 +336,7 @@ class Baseline:
     def wait_settled(self, timeout=SETTLE_S, unreachable_s=10):
         """Block until forgectrl reports a settled supervisor: motion
         verified (the probe passed), motion-fault (the ladder exhausted),
-        standby (the manual stop lever), or gated (the commissioning gate
+        standby (the manual stop lever), or gated (the setup gate
         is closed: no controller spawns until it opens). Gives up after
         unreachable_s without an answer. Returns the last /mode body (None
         if unreachable)."""
@@ -450,6 +465,9 @@ class Baseline:
         preserved state to hand back (post) - None compares nothing."""
         left = []
         self.mode = None
+        # the counters' scale is the mode the run counted under, read
+        # before the kernel side puts the settings' mode back
+        self._counter_spm = counter_steps_per_mm()
         self._forgectrl_side(left, captured)
         self._kernel_side(left)
         self._lamp_side(left)
@@ -596,13 +614,37 @@ class Baseline:
                 except OSError as e:
                     act = "failed: %s" % e
                 left.append(Leftover("laser_locked", False, True, act))
-        # cooling engine idle, unarmed
+        self._cool_side(left)
+
+    def _cool_side(self, left):
+        """The cooling engine idle, unarmed, holding nothing."""
         st, c = self.fc_get("/cool/status")
-        if st == 200 and isinstance(c, dict):
+        if st != 200 or not isinstance(c, dict):
-            if c.get("phase") != "idle" or c.get("armed") or c.get("hold"):
+            return
+        if c.get("phase") == "idle" and not c.get("armed") and not c.get("hold"):
+            return
         found = "%s/armed=%s/hold=%s" % (c.get("phase"), c.get("armed"), c.get("hold"))
         idle = lambda: (lambda x: x.get("phase") == "idle" and not x.get("armed")     # noqa: E731
                         and not x.get("hold"))(self.fc_get("/cool/status")[1] or {})
+        # The engine publishes once a tick (1 Hz). A read inside the tick
+        # after a run ended still shows the run: a diagnostic's hold until
+        # the engine has the hardware back, a fail tier's hold until the
+        # session ends with the controller. What the engine's next tick
+        # clears was never left behind, so an arm or a hold is read again
+        # past that tick before it is called the run's doing. One that a
+        # run did leave stands for a job that is never coming back, and it
+        # is still there.
+        if c.get("armed") or c.get("hold"):
+            free = lambda: (lambda x: bool(x) and not x.get("armed")                  # noqa: E731
+                            and not x.get("hold"))(self.fc_get("/cool/status")[1] or {})
+            if self._wait("cool publish", free, COOL_PUBLISH_S) is not None:
+                st, c2 = self.fc_get("/cool/status")
+                c = c2 if st == 200 and isinstance(c2, dict) else {}
+                self.log("cool: %s was the engine's last word on the run; its next tick reads "
+                         "%s/armed=%s/hold=%s" % (found, c.get("phase"), c.get("armed"), c.get("hold")))
+                if c.get("phase") == "idle":
+                    return
+                found = "%s/armed=%s/hold=%s" % (c.get("phase"), c.get("armed"), c.get("hold"))
         # Armed, or holding, is the run's doing. A phase alone is
         # not: the engine clears smoke at run duty after an armed
         # session and cools down after a hot one, both timed and
@@ -614,7 +656,7 @@ class Baseline:
         if w is not None and not dirt:
             self.log("cool: %s ended on its own after %.0f s; the engine's own post-job "
                      "work, not a leftover" % (found, w))
-                else:
+            return
         # The engine holds for a job. A run that ended without
         # ending its job leaves one alive, and no amount of
         # waiting ends it: stand the machine down and let the
@@ -693,13 +735,14 @@ class Baseline:
                 self.log("leds/%s: target 0, brightness %s; the fade from a level the machine "
                          "itself ended, not a leftover" % (name, read_led(name, "brightness")))
 
-    def _return_head(self, was, now):
+    def _return_head(self, was, now, spm=XY_STEPS_PER_MM):
         """Jog the head back along its own path by the kernel-measured X/Y
-        delta (Z is never touched), through the GRBL controller. Bounded:
+        delta (Z is never touched), through the GRBL controller. spm is
-        beyond RETURN_MAX_MM per axis, or without a running GRBL
+        the counters' scale (the mode's). Bounded: beyond RETURN_MAX_MM
-        controller, the counters are reported and left."""
+        per axis, or without a running GRBL controller, the counters are
-        dx = (now[0] - was[0]) / XY_STEPS_PER_MM
+        reported and left."""
-        dy = (now[1] - was[1]) / XY_STEPS_PER_MM
+        dx = (now[0] - was[0]) / spm
+        dy = (now[1] - was[1]) / spm
         if abs(dx) < 0.02 and abs(dy) < 0.02:
             return "unrestorable (Z only)" if now[2] != was[2] else "restored"
         if abs(dx) > RETURN_MAX_MM or abs(dy) > RETURN_MAX_MM:
@@ -787,8 +830,9 @@ class Baseline:
         was = captured.get("position")
         now = read_position()
         if was is not None and now is not None and now != was and not self.cloud_mode():
-            act = self._return_head(was, now)
+            spm = self._counter_spm
-            if position_quantized(was, now):
+            act = self._return_head(was, now, spm)
+            if position_quantized(was, now, spm):
                 self.log("position: %s (expected %s) -> %s; inside the %.2f mm dead band, "
                          "not a leftover" % (now, was, act, POSITION_DEADBAND_MM))
             else:

forgetest/forgetest/bench.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The bench diagnostics page: registry of the bench tools and the
 subprocess runner behind the #bench tab.
 
@@ -247,8 +252,11 @@ TOOLS = [
     {"id": "z-envelope-test", "title": "Z envelope harness", "script": "z_envelope_test.py",
      "safety": "dry", "where": "host", "ported": False, "args": [],
      "desc": "The Z soft limit belongs to the driver, not to $20: an unreferenced Z is collapsed to where the "
-             "lens stands, and neither a $20 nor a $132 write frees it. A CI harness (the grblHAL repo): needs "
+             "lens stands, and neither a $20 nor a $132 write frees it. A referenced lens (forgectrl's marker "
-             "the host-built null-sink controller, not the machine, so it is not a bench-page tool."},
+             "and the lens settings) opens it to the window the settings hold, the fallback or the focus "
+             "card's stops: the ends of the reach run, two half-steps past either end alarms. A CI harness "
+             "(the grblHAL repo): needs the host-built null-sink controller, not the machine, so it is not a "
+             "bench-page tool."},
     {"id": "raster-dry", "title": "Dry top-speed raster per XY microstep mode", "script": "raster_dry.py",
      "safety": "dry", "where": "board", "ported": True,
      "args": [_arg("modes", "choice", "8 16 32", "the modes to run, in order", ["8", "16", "32", "8 16 32"])],

forgetest/forgetest/campaign.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """Campaign rules: which results apply, what is required, and whether a
 release is authorized.
 

forgetest/forgetest/catalog.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The acceptance catalog: test definitions and the registry.
 
 A test is a function decorated with @test(...). The decorator records

forgetest/forgetest/coverage.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """Coverage lint: every source path in the manifest must be selected by
 some test's coverage globs, except the allowlisted non-behavioral paths,
 and every coverage glob must select at least one path of its component.

forgetest/forgetest/fixture.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The bench actuator (forgefixture): the box on the bench network that
 opens the lid loop, pulls the interlock loop and presses the button on
 request, so an operator test can run with nobody in the room.

forgetest/forgetest/hw.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """Hardware and service access for the suite: forgectrl's HTTP API, the
 kernel module's sysfs, the init scripts, and the Grbl TCP port.
 

forgetest/forgetest/log.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The append-only result log (JSONL) and the export helpers.
 
 One JSON object per line under the data directory (default

forgetest/forgetest/manifest.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The image manifest and the domain fingerprint.
 
 /etc/forgefirm-manifest.json (written by forgefirm-image-manifest.bbclass)

forgetest/forgetest/page.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The single page: acceptance tab + bench tab, assembled from ui/ into
 one self-contained response (no external assets). Bootstrap and the
 OpenGlow theme are inlined; theme.css and the vendor/ files are the same

forgetest/forgetest/puls.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """Pulse files for the offline cloud service: a job the machine will run
 without the service having cut it.
 

forgetest/forgetest/redact.py

@@ -0,0 +1,135 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
+"""Redaction for the release artifact.
+
+The artifact is committed to a public repository, so it carries no
+identity of the machine that ran the campaign. This applies the same two
+layers forgectrl's log export applies (forgectrl/src/sanitize.c), in the
+same order, to every value the exporter writes:
+
+ 1. Known keys: a value held under a key that names identifying data -
+    the serial, the machine id, the hostname, the wireless credentials,
+    a token - is replaced whole. Naming the key is far more reliable
+    than guessing the shape of what is under it.
+ 2. Pattern classes over every remaining string: MAC addresses, IPv4 and
+    IPv6 addresses (loopback and unspecified kept), e-mail addresses,
+    bearer and basic credentials, JWTs, and long hex blobs. Each distinct
+    value in a class keeps a stable number for the life of one export, so
+    "<IP-2>" is the same host wherever it appears and the artifact stays
+    readable as evidence.
+
+Integrity values are never touched: the self-hash, the manifest and
+catalog hashes, each test's source hash and fingerprint. Those are what
+the gate recomputes, and a long hex blob is exactly what they look like.
+
+Over-redaction is accepted where the alternative is a leak.
+"""
+import re
+
+# Layer 1: the value under one of these keys is replaced whole.
+REDACT_KEYS = frozenset((
+    "gf_serial", "machine_id", "serial", "serial_number",
+    "hostname", "hostname_file", "host",
+    "ssid", "psk", "passphrase", "password", "passwd",
+    "token", "panel_token", "secret", "api_key", "key",
+    "mac", "macaddr", "mac_suffix", "wlan0", "eth0",
+    "gf_username", "gf_password", "username", "user", "email",
+))
+
+# Never touched, by key: the gate recomputes these and they look like
+# exactly what layer 2 hunts for.
+KEEP_KEYS = frozenset((
+    "sha256", "manifest_sha", "identity_sha", "catalog_hash",
+    "source_sha", "fingerprint", "content_sha", "srcrev",
+))
+
+_KEEP_IP = frozenset(("0.0.0.0", "255.255.255.255"))
+
+_CLASSES = (
+    ("SECRET", re.compile(r"(?i)\b(?:bearer|basic)\s+[A-Za-z0-9._~+/=-]{8,}")),
+    ("JWT", re.compile(r"\beyJ[A-Za-z0-9_-]{8,}\.[A-Za-z0-9_-]{8,}\.[A-Za-z0-9_-]{8,}")),
+    ("EMAIL", re.compile(r"\b[A-Za-z0-9._%+-]+@[A-Za-z0-9.-]+\.[A-Za-z]{2,}\b")),
+    ("MAC", re.compile(r"\b(?:[0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}\b")),
+    # Three or more colons, or a "::" run: two colons is a clock time, and
+    # tagging every timestamp would make the evidence unreadable.
+    ("IP6", re.compile(
+        r"(?:[0-9A-Fa-f]{1,4}:){3,7}[0-9A-Fa-f]{1,4}"
+        r"|[0-9A-Fa-f]{0,4}(?::[0-9A-Fa-f]{1,4})*::(?:[0-9A-Fa-f]{1,4}(?::[0-9A-Fa-f]{1,4})*)?")),
+    ("IP", re.compile(r"\b(?:\d{1,3}\.){3}\d{1,3}\b")),
+    ("HEX", re.compile(r"\b[0-9A-Fa-f]{32,}\b")),
+)
+
+
+class Redactor:
+    """Stable per-export numbering, one instance per artifact."""
+
+    # A known value shorter than this is too generic to replace blind.
+    MIN_KNOWN = 4
+
+    def __init__(self):
+        self._n = {}
+        self._known = {}
+
+    def learn(self, obj, key=None):
+        """Collect the values held under the layer-1 keys, so they are
+        replaced wherever else they appear - a hostname in a log line is
+        the same leak as a hostname in its own field."""
+        if key is not None and key in KEEP_KEYS:
+            return
+        if isinstance(obj, dict):
+            for k, v in obj.items():
+                self.learn(v, k)
+        elif isinstance(obj, list):
+            for v in obj:
+                self.learn(v)
+        elif key in REDACT_KEYS and isinstance(obj, str) and len(obj) >= self.MIN_KNOWN:
+            if obj not in self._known:
+                self._known[obj] = self._tag("REDACTED", "%s=%s" % (key, obj))
+
+    def _tag(self, cls, value):
+        seen = self._n.setdefault(cls, {})
+        if value not in seen:
+            seen[value] = len(seen) + 1
+        return "<%s-%d>" % (cls, seen[value])
+
+    def text(self, s):
+        for known in sorted(self._known, key=len, reverse=True):
+            if known in s:
+                s = s.replace(known, self._known[known])
+        for cls, rx in _CLASSES:
+            def sub(m, cls=cls):
+                v = m.group(0)
+                if cls == "IP" and (v.startswith("127.") or v in _KEEP_IP):
+                    return v
+                if cls == "IP6" and v in ("::", "::1"):
+                    return v
+                return self._tag(cls, v)
+            s = rx.sub(sub, s)
+        return s
+
+    def value(self, v, key=None):
+        if key is not None and key in KEEP_KEYS:
+            return v
+        if key is not None and key in REDACT_KEYS and not isinstance(v, (dict, list)):
+            if v is None:
+                return None
+            if isinstance(v, str) and v in self._known:
+                return self._known[v]
+            return self._tag("REDACTED", "%s=%s" % (key, v))
+        if isinstance(v, dict):
+            return {k: self.value(x, k) for k, x in v.items()}
+        if isinstance(v, list):
+            return [self.value(x) for x in v]
+        if isinstance(v, str):
+            return self.text(v)
+        return v
+
+
+def scrub(obj):
+    """Redact a value tree with one export's numbering."""
+    r = Redactor()
+    r.learn(obj)
+    return r.value(obj)

forgetest/forgetest/runner.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The runner: executes one acceptance test or one bench tool at a time.
 
 Acceptance tests run in a worker thread with a Context: log lines, an

forgetest/forgetest/server.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """HTTP: the page, the JSON API, and the access rules.
 
 Access follows forgectrl's panel (auth.c): the Host header must be an

forgetest/forgetest/suite/__init__.py

@@ -1,12 +1,17 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The acceptance suite: one module per subsystem, imported in display
 order. Each module registers its tests with @catalog.test."""
 
 from . import image      # noqa: F401,E402
 from . import kernel     # noqa: F401,E402
 from . import forgectrl  # noqa: F401,E402
-from . import commission # noqa: F401,E402
+from . import setup # noqa: F401,E402
-from . import commission_dark  # noqa: F401,E402
+from . import setup_dark  # noqa: F401,E402
-from . import commission_sheet  # noqa: F401,E402
+from . import setup_sheet  # noqa: F401,E402
 from . import logs       # noqa: F401,E402
 from . import motion     # noqa: F401,E402
 from . import cooling    # noqa: F401,E402

forgetest/forgetest/suite/camera.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """camera.* - the lid camera pipeline through forgectrl."""
 import json
 
@@ -396,7 +401,7 @@ def lid_privacy(ctx):
                   "authorizes a write; a rotation from the panel route stops the old key and "
                   "the new one reads. The setting is put back after.")
 def key_read(ctx):
-    from .commission import request
+    from .setup import request
     from .forgectrl import lan_ip
     fc = ctx.forgectrl
     ev = ctx.evidence

forgetest/forgetest/suite/cloud.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """cloud.* - the controller mode switch and the optional Glowforge web-service
 mode (gfcloud daemon, gfhome homing runner). The mode-switch test makes the
 grbl -> cloud -> grbl round trip with the connect-time hunt run lid-open and
@@ -87,6 +92,9 @@ FORGECTRL_LOG = "/data/log/forgefirm/forgectrl/forgectrl.log"
 LIMITS_MARK = "job limits from the header: "
 EFFECTIVE_MARK = "effective limits: coolant ceiling "
 SESSION_MARKS = ("authenticate_machine SUCCESS", "ws_connect ESTABLISHED")
+# The service's connect-time hunt, as the client logs its request: a few
+# seconds after the controller starts, right behind the session.
+HUNT_REQUEST = "service action request: hunt"
 RETURN_MAX_MM = 600.0       # the head comes back from the home corner across the bed
 
 
@@ -145,7 +153,7 @@ def return_head(ctx, feed=2400):
               "head not back at the start after the return jog: %s", pos)
 
 
-def wait_mode(ctx, fc, want_mode, want_controller="running", timeout=90):
+def wait_mode(ctx, fc, want_mode, want_controller="running", timeout=90, poll=1.0):
     t0 = time.time()
     last = None
     while time.time() - t0 < timeout:
@@ -157,7 +165,7 @@ def wait_mode(ctx, fc, want_mode, want_controller="running", timeout=90):
                 return m
             if m.get("controller") == "motion-fault":
                 break
-        time.sleep(1)
+        time.sleep(poll)
     return last
 
 
@@ -227,6 +235,11 @@ def gfhome_homing(ctx, ev, g):
     # homed: the counters are re-anchored at the corner, where the head stays
     ctx.counters_rezeroed()
     ctx.check(ctx.forgectrl.wait_idle(15, abort=ctx.aborted), "machine not idle after homing")
+    # The driver answers $H when the session ends; that ok (and the
+    # session's messages) sit in the buffer behind the status reports and
+    # would pass for the reply to the caller's next command.
+    ack = " | ".join(ln.strip() for ln in g.drain().splitlines() if ln.strip())
+    ctx.log("$H acknowledged: %s", ack[:160] or "(nothing buffered)")
 
 
 @test("cloud.mode-switch", title="Controller mode switch grbl -> cloud -> grbl, the connect-time hunt "
@@ -235,17 +248,22 @@ def gfhome_homing(ctx, ev, g):
       covers=_HOMING_PATH + [("forgectrl", "src/cool.*"), ("forgectrl", "src/airflow.*"),
                              ("grblhal-glowforge", "src/**")],
       requires=["forgectrl.auth", "motion.pacing"], actions=["lid"],
-      steps=["Bed clear; cloud credentials configured; the machine on the network. The test "
+      steps=["Bed clear, lid closed; cloud credentials configured; the machine on the network. "
-             "turns cloud mode and the gfcloud homing on itself when they are off, and puts "
+             "The test turns cloud mode and the gfcloud homing on itself when they are off, and "
-             "the settings back at the end.",
+             "puts the settings back at the end.",
-             "Open the lid when told and leave it open through the cloud client's connect and its "
+             "Open the lid the moment you are told, with a hand ready on it: the cloud client's "
-             "hunt; close it when told. Nothing else: the switch back and the $H homing run on "
+             "first hunt begins a few seconds after its controller starts and must find the lid "
-             "their own, and the head ends parked at the home corner."],
+             "open. Leave it open through the connect and the hunt; close it when told. Nothing "
+             "else: the switch back and the $H homing run on their own, and the head ends parked "
+             "at the home corner."],
       description="One round trip with the two service-driven motions on it. POST /mode switches "
-                  "to the cloud controller: gfcloud comes up under supervision, authenticates and "
+                  "to the cloud controller with the lid closed (no controller starts with the "
+                  "enclosure open): gfcloud comes up under supervision, authenticates and "
                   "establishes its service session (its own log lines are the evidence; the "
-                  "connect-time firmware probe is recorded when configured). Its connect-time hunt "
+                  "connect-time firmware probe is recorded when configured). The lid is opened the "
-                  "runs with the lid OPEN, as the factory's does - it completes, nothing before its "
+                  "moment the controller is up, before the client requests its connect-time hunt "
+                  "(a hunt requested before the lid was open fails the test), so the hunt runs "
+                  "with the lid OPEN, as the factory's does - it completes, nothing before its "
                   "end is refused for the lid, the lens homes - and with the extraction fans off it "
                   "is measured by the airflow gates but not judged (no AIRFLOW, the exhaust row "
                   "reads unjudged); the camera service survives the switch. The lid closed, the "
@@ -270,17 +288,32 @@ def mode_switch(ctx):
     except OSError:
         pass
     lamp0 = hw.sysfs_read("pic/lid_led")
+    ctx.check(ctx.switch("lid") is True, "close the lid first: no controller starts with it open")
 
-    ctx.act("lid", "open", text="Leave it open: the cloud client connects and hunts with the lid open.")
+    # The switch is made with the enclosure closed (the supervisor holds
+    # every spawn until it is). The lid opens the moment the controller is
+    # up: the client requests its connect-time hunt a few seconds after
+    # its start, right behind its session, and the hunt must find the lid
+    # open. The poll is tight so the window is not spent waiting.
     log_offset = log_size(GFCLOUD_LOG)
     st, body = fc.post("/mode", data={"controller": "cloud"})
     ctx.log("POST /mode controller=cloud -> %s %s", st, body)
     ctx.check(st == 200, "mode switch to cloud refused: %s %s", st, body)
-    m = wait_mode(ctx, fc, "cloud", timeout=90)
+    m = wait_mode(ctx, fc, "cloud", timeout=90, poll=0.2)
     ev["mode_cloud"] = m
     ctx.log("mode after switch: %s", m)
     ctx.check(m and m.get("mode") == "cloud" and m.get("controller") == "running",
               "cloud controller did not come up: %s", m)
+    ctx.act("lid", "open", text="Now, at once: the cloud client's first hunt begins a few seconds "
+            "after its controller starts and must find the lid open. Leave it open through the "
+            "connect and the hunt.")
+    # The order is the proof: the hunt's request is not in the log yet
+    # when the lid reads open.
+    ev["hunt_before_lid_open"] = log_has(log_offset, HUNT_REQUEST)
+    ctx.check(not ev["hunt_before_lid_open"],
+              "the client requested its hunt before the lid was open (the hunt follows the "
+              "controller's start by a few seconds): the lid opened too late, so a hunt with the "
+              "lid open is not proven")
     # the client's own session lines are the evidence of a live cloud session
     session = wait_session(ctx, log_offset)
     probe = None
@@ -1295,42 +1328,96 @@ def lid_during_button_wait_body(ctx, ev, off, job, offset):
 # ---------------------------------------------------------------- the cooling verdict
 
 HOLD_KEYS = ("cool_temp_min", "cool_temp_start")
-WARMUP_ABOVE_C = 1.0        # the start gate this far above the loop: a few heater minutes
+REFUSE_KEYS = HOLD_KEYS + ("cloud_hold_max_s",)
-WARMUP_RELEASE_S = 720      # the flow heater warms the bulk 0.4 to 0.8 C a minute
+HOLD_REFUSE_S = 60          # the shortest bound the client takes
+HOLD_REFUSE_LINE = "cooling hold held 60 s - relocking the laser"
 WARMUP_WAIT_LINE = "waiting on the cooling engine: WARMUP"
-WARMUP_RELEASE_LINE = "cooling verdict clean after WARMUP; starting the run"
 
 
-@test("cloud.verdict-hold", title="A cloud print armed under the warm-up gate waits for the engine",
+@test("cloud.dark-print", title="A dark cloud print: the latch locked until the run, unlocked "
-      subsystem="cloud", kind="operator", est_min=14,
+                                 "for it, locked after it",
+      subsystem="cloud", kind="operator", est_min=3,
       covers=_MACHINE_RUN + [("python3-gfhardware", "gfhardware/coolsvc.py"),
                              ("forgectrl", "src/cool.*"), ("forgectrl", "src/main.c")],
       requires=["cloud.lid-during-button-wait", "cooling.floor-and-warm-up"], actions=["button"],
       steps=[OFFLINE_STEP,
-             "Coolant at room temperature (10 to 30 C). The test sets the warm-up gate just above "
+             "Bed clear (the job is dark: a 30 s square at S0, nothing fires). Press the button "
-             "the coolant and restores it. Press the button when it lights: the print then waits "
+             "when it lights: the print waits for the engine, runs, and finishes."],
-             "for the warm-up (a few minutes with the loop heater on), runs dark, and finishes."],
+      description="The cooling-engine contract in cloud mode at its ordinary end, on the engine "
-      description="The cooling-engine contract in cloud mode, on the engine itself: the start gate "
+                  "itself: the print arms on the press, waits for the engine's acknowledgment (the "
-                  "set just above the coolant makes the armed session open under the warm-up "
+                  "fans at their floors), and runs. The laser latch is locked at the button and "
-                  "(WARMUP: fire blocked, hold), and the client waits it out after the button "
+                  "through the wait, unlocks only for the run (immediately before it starts), and "
-                  "instead of canceling - nothing runs, the latch stays unlocked for the armed "
+                  "is locked again when the job ends; the print completes. A hold the engine never "
-                  "window - until the engine releases into run, and the release starts the print, "
+                  "clears is cloud.verdict-refuse; the engine's own warm-up release is "
-                  "which completes. The hold mid-run (the same laser-off pause as the button's, "
+                  "cooling.floor-and-warm-up.")
-                  "resumed on the engine's resume_ok) and the bound on a hold are host-tested: the "
+def dark_print(ctx):
-                  "gates apply at session open, so no setting can produce a hold mid-run here.")
+    ev = ctx.evidence
-def verdict_hold(ctx):
+    fc = ctx.forgectrl
+    offset = enter_offline(ctx)
+    job = offline_job(ctx, "dark.puls", seconds=30)
+    off = Offline().__enter__()
+    try:
+        dark_print_body(ctx, ev, off, job, offset, fc)
+    finally:
+        off.__exit__(None, None, None)
+        offline_cleanup(ctx)
+
+
+def dark_print_body(ctx, ev, off, job, offset, fc):
+    off.print_ready(9005, job)
+    got = wait_log(ctx, offset, ["waiting for button"], 120)
+    ctx.check(got["waiting for button"], "the print never reached the button wait")
+    ev["latch_locked_at_button"] = latch_locked()
+    ctx.check(ev["latch_locked_at_button"], "the latch is unlocked at the button wait")
+    ctx.act("button", "press", text="The button is lit: press it. The print runs dark and finishes.",
+            until=lambda: wait_print_running(ctx, offset, 0.1) is not None, timeout=PRESS_TIMEOUT_S)
+    run = wait_print_running(ctx, offset, 60)
+    ctx.check(run is not None, "the print did not start after the press")
+    ctx.sleep(1.0)
+    ev["latch_locked_in_run"] = latch_locked()
+    ctx.check(ev["latch_locked_in_run"] is False, "the latch is locked during the run")
+    fin = wait_action_finished(ctx, offset, "print", 180)
+    ev["print finished"] = message(fin)
+    ctx.check(fin and COMPLETED in fin, "the print did not complete: %s", message(fin) or "no finish line")
+    st, cs = fc.get("/cool/status")
+    ev["armed_after"] = cs.get("armed") if isinstance(cs, dict) else None
+    ctx.check(not ev["armed_after"], "armed window still open after the print")
+    ev["latch_locked_after"] = latch_locked()
+    ctx.check(ev["latch_locked_after"], "the latch is unlocked after the print")
+    ev["events"] = offline_events(off)
+    ctx.log("PASS: locked at the button, unlocked for the run, locked after it; the print completed")
+
+
+@test("cloud.verdict-refuse", title="A cloud print held by the engine past the bound is canceled with "
+                                     "the latch never unlocked",
+      subsystem="cloud", kind="operator", est_min=4,
+      covers=_MACHINE_RUN + [("python3-gfhardware", "gfhardware/coolsvc.py"),
+                             ("forgectrl", "src/cool.*")],
+      requires=["cloud.dark-print"], actions=["button"],
+      steps=[OFFLINE_STEP,
+             "Coolant at room temperature (10 to 30 C). The test sets the warm-up gate well above "
+             "the coolant and the hold bound to its minimum, and restores both. Press the button "
+             "when it lights: nothing runs; a minute later the print cancels by itself."],
+      description="The other end of the cooling-engine contract before a run: a verdict that "
+                  "refuses fire and never clears. The start gate far above the coolant keeps the "
+                  "armed session under the warm-up for longer than the hold bound (cloud_hold_max_s "
+                  "at its minimum, 60 s). The client waits with the laser latch locked the whole "
+                  "time - it is never unlocked before the verdict passes, so there is nothing to "
+                  "relock - then cancels the print at the bound: no run, the armed window closed, "
+                  "the print ':cancelled'. Dark by construction.")
+def verdict_refuse(ctx):
     ev = ctx.evidence
     fc = ctx.forgectrl
     before = fc.settings()
-    orig = {k: before.get(k, "") for k in HOLD_KEYS}
+    orig = {k: before.get(k, "") for k in REFUSE_KEYS}
     ev["orig"] = orig
     up = (fc.status().get("coolant") or {}).get("up_c")
     ctx.check(up is not None and 10.0 <= up <= 30.0, "coolant outside the test's range (up_c %s)", up)
     offset = enter_offline(ctx)
-    job = offline_job(ctx, "hold.puls", seconds=30)
+    job = offline_job(ctx, "refuse.puls", seconds=30)
     off = Offline().__enter__()
     try:
-        verdict_hold_body(ctx, ev, off, job, offset, fc, up, orig)
+        verdict_refuse_body(ctx, ev, off, job, offset, fc, up, orig)
     finally:
         st, body = fc.post("/settings", params=orig)
         ctx.log("restore: POST /settings %s -> %s", orig, st)
@@ -1338,46 +1425,53 @@ def verdict_hold(ctx):
         offline_cleanup(ctx)
 
 
-def verdict_hold_body(ctx, ev, off, job, offset, fc, up, orig):
+def verdict_refuse_body(ctx, ev, off, job, offset, fc, up, orig):
-    gate = round(up + WARMUP_ABOVE_C, 1)
+    gate = round(up + 8.0, 1)           # eight degrees: the heater cannot get there in a minute
     st, body = fc.post("/settings", params={"cool_temp_start": str(gate),
-                                            "cool_temp_min": orig["cool_temp_min"]})
+                                            "cool_temp_min": orig["cool_temp_min"],
-    ctx.check(st == 200, "POST /settings cool_temp_start=%s -> %s %s", gate, st, body)
+                                            "cloud_hold_max_s": str(HOLD_REFUSE_S)})
+    ctx.check(st == 200, "POST /settings cool_temp_start=%s cloud_hold_max_s=%s -> %s %s",
+              gate, HOLD_REFUSE_S, st, body)
     ev["gate"] = gate
-    off.print_ready(9005, job)
+    off.print_ready(9006, job)
     got = wait_log(ctx, offset, ["waiting for button"], 120)
     ctx.check(got["waiting for button"], "the print never reached the button wait")
-    ctx.act("button", "press", text="The button is lit: press it. The print then waits for the warm-up.",
+    ev["latch_locked_at_button"] = latch_locked()
+    ctx.check(ev["latch_locked_at_button"], "the latch is unlocked at the button wait")
+    ctx.act("button", "press", text="The button is lit: press it. Nothing runs; the print cancels "
+            "itself a minute later.",
             until=lambda: log_has(offset, WARMUP_WAIT_LINE), timeout=PRESS_TIMEOUT_S)
     got = wait_log(ctx, offset, [WARMUP_WAIT_LINE], 30)
     ctx.check(got[WARMUP_WAIT_LINE], "the armed print did not wait on the warm-up")
-    st, c = fc.get("/cool/status")
-    ev["warmup"] = c
-    ctx.check(isinstance(c, dict) and c.get("verdict") == "WARMUP" and c.get("hold") is True
-              and c.get("fire_ok") is False,
-              "the engine is not holding the armed session on the warm-up: %s", c)
-    ctx.check(wait_print_running(ctx, offset, 2) is None, "the run started under the warm-up hold")
-    ctx.notice("Warm-up: the loop heater brings the coolant to the gate; a few minutes. Do nothing.")
-    try:
     t0 = time.time()
-        run = wait_print_running(ctx, offset, WARMUP_RELEASE_S)
+    samples = []
+    ctx.notice("The engine holds the print; the client gives up at the bound. Do nothing.")
+    try:
+        while time.time() - t0 < HOLD_REFUSE_S + 30:
+            ctx.checkpoint()
+            samples.append(latch_locked())
+            if log_has(offset, HOLD_REFUSE_LINE):
+                break
+            ctx.sleep(2)
     finally:
         ctx.clear_notice()
-    ev["release_s"] = round(time.time() - t0)
+    ev["hold_s"] = round(time.time() - t0)
-    got = wait_log(ctx, offset, [WARMUP_RELEASE_LINE], 5)
+    ev["latch_samples"] = {"n": len(samples), "unlocked": samples.count(False)}
-    ev["log"] = {WARMUP_WAIT_LINE: True, WARMUP_RELEASE_LINE: bool(got[WARMUP_RELEASE_LINE])}
+    ctx.check(log_has(offset, HOLD_REFUSE_LINE), "the client did not cancel at the hold bound (%d s)",
-    ctx.check(got[WARMUP_RELEASE_LINE], "the warm-up did not release into the run within %d s",
+              ev["hold_s"])
-              WARMUP_RELEASE_S)
+    ctx.check(all(samples), "the latch unlocked during the hold (%d of %d samples)",
-    ctx.check(run is not None, "the print did not start after the warm-up")
+              samples.count(False), len(samples))
-    fin = wait_action_finished(ctx, offset, "print", 180)
+    ctx.check(wait_print_running(ctx, offset, 1) is None, "the run started under the refused verdict")
+    fin = wait_action_finished(ctx, offset, "print", 120)
     ev["print finished"] = message(fin)
-    ctx.check(fin and COMPLETED in fin, "the print did not complete after the warm-up: %s",
+    ctx.check(fin and CANCELLED in fin, "the held print did not end ':cancelled': %s",
               message(fin) or "no finish line")
     st, cs = fc.get("/cool/status")
     ev["armed_after"] = cs.get("armed") if isinstance(cs, dict) else None
-    ctx.check(not ev["armed_after"], "armed window still open after the print")
+    ctx.check(not ev["armed_after"], "armed window still open after the cancel")
+    ctx.check(latch_locked(), "the latch is unlocked after the cancel")
     ev["events"] = offline_events(off)
-    ctx.log("PASS: the armed print waited %s s on the warm-up, then ran and completed", ev["release_s"])
+    ctx.log("PASS: held %s s with the latch locked throughout, then canceled at the bound", ev["hold_s"])
 
 
 @test("cloud.pause-resume", title="Button pauses and resumes a cloud print (factory backtrack + lead)",

forgetest/forgetest/suite/cooling.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """cooling.* - the cooling engine: flow verification through forgectrl's
 diagnostics runner (the same check the fire gate runs), the fan profile
 returning to idle after motion, the gate settings (a value inside the
@@ -5,6 +10,7 @@ legal range trips the gate, the far end of the range turns it off by
 value, and both are said out loud: the settings reply, /status, the
 engine's run-start log line), and the airflow gates (a fan under its
 floor past the spin-up grace is a fault for the rest of the run)."""
+import os
 import time
 
 from ..catalog import test
@@ -746,7 +752,7 @@ FIRE_WAIT_S = 25            # settings re-read at run start, two-tick breach, 1
 
 @test("cooling.fire-watch-tiers", title="The lid-IR fire watch pauses at its alert and fails at its critical",
       subsystem="cooling", kind="auto", mode="grbl", est_min=6,
-      covers=_COOL_COVERS, requires=["kernel.latch-locked-idle"],
+      covers=_COOL_COVERS + [("forgectrl", "src/super.*")], requires=["kernel.latch-locked-idle"],
       steps=["Machine idle, lid closed, lid lamp at its resting level. The test moves the flame "
              "thresholds under the lamp's own reading and restores them; three M8/M9 sessions, "
              "no fire."],
@@ -759,6 +765,7 @@ FIRE_WAIT_S = 25            # settings re-read at run start, two-tick breach, 1
                   "read as the four flame gates off and the watch reads watch. Restored, the "
                   "watch reads armed at OK.")
 def fire_watch_tiers(ctx):
+    from .motion import FORGECTRL_LOG, _log_lines, _log_offset
     fc = ctx.forgectrl
     ev = ctx.evidence
     before = fc.settings()
@@ -810,7 +817,16 @@ def fire_watch_tiers(ctx):
             ctx.check(c.get("verdict") == "OK", "the alert survived into a fresh session: %s", c)
 
             # Leg 2: the fail tier. The q1 critical under the lamp reading
-            # stops the session and latches FIRE until it ends.
+            # latches FIRE and locks the laser; the fail tier then stops
+            # the controller through the supervisor and starts it again,
+            # so no run start can relight what was locked and the sender
+            # sees the job end. The Grbl socket dies with the restart -
+            # FIRE is read from the engine, the latch from sysfs, the stop
+            # from the supervisor's log, and a fresh session is opened for
+            # the legs that follow.
+            st, m0 = fc.get("/mode")
+            pid0 = m0.get("pid") if isinstance(m0, dict) else None
+            off = _log_offset(FORGECTRL_LOG)
             _set_gates(ctx, fc, {"cool_fire_q1_critical": str(max(2, q1 - 5)),
                                  "cool_fire_q1_alert": str(max(1, q1 - 10))})
             grbl.command("M8")
@@ -821,19 +837,38 @@ def fire_watch_tiers(ctx):
                 c = _cool(fc)
                 if c.get("verdict") == "FIRE":
                     break
+            ilk = hw.sysfs_int("cnc/interlock_circuit")
             ev["critical"] = c
-            ctx.log("critical leg: verdict %s fire_watch %s", c.get("verdict"), c.get("fire_watch"))
+            ev["interlock_circuit"] = ilk
+            ctx.log("critical leg: verdict %s fire_watch %s interlock_circuit %s",
+                    c.get("verdict"), c.get("fire_watch"), ilk)
             ctx.check(c.get("verdict") == "FIRE", "q1 critical under the lamp did not latch FIRE: %s", c)
             ctx.check(c.get("fire_watch") == "ALARM", "fire_watch %r during FIRE, expected ALARM", c.get("fire_watch"))
-            ilk = hw.sysfs_int("cnc/interlock_circuit")
-            ev["interlock_circuit"] = ilk
             ctx.check(ilk is not None and (ilk & 8), "the laser latch is not locked under FIRE (interlock_circuit=%s)", ilk)
             ctx.check(_tail_wait(ctx, fc, "LID IR FIRE SIGNAL (quartiles "),
                       "the FIRE line is missing from the forgectrl log")
+            # the fail tier stops the controller and starts it again; the
+            # Grbl socket dies with it. Wait out the restart, prove the
+            # supervisor logged the stop, restore the thresholds, and open
+            # a fresh session on the new controller.
+            grbl.close()
+            m1 = None
+            t0 = time.time()
+            while time.time() - t0 < 60:
+                st, m1 = fc.get("/mode")
+                if isinstance(m1, dict) and m1.get("controller") == "running" and m1.get("pid") != pid0:
+                    break
+                ctx.sleep(0.5)
+            ev["restart"] = {"pid_before": pid0, "mode_after": m1}
+            ctx.log("after FIRE: %s", ev["restart"])
+            ctx.check(m1 and m1.get("controller") == "running" and m1.get("pid") != pid0,
+                      "the controller was not stopped and started again after FIRE: %s", m1)
+            ctx.check(_log_lines(FORGECTRL_LOG, off, "lid IR fire signal - the controller is stopped"),
+                      "the supervisor did not log the fail-tier stop after FIRE")
             _set_gates(ctx, fc, {"cool_fire_q1_critical": orig["cool_fire_q1_critical"],
                                  "cool_fire_q1_alert": orig["cool_fire_q1_alert"]})
-            grbl.command("M9")
+            ctx.check(fc.wait_idle(30, abort=ctx.aborted), "machine not idle after the FIRE restart")
-            _session_ended(ctx, fc, "critical leg")
+            grbl.connect()      # a fresh session on the restarted controller
 
             # Leg 3: all four at zero: the watch off, said so, session OK.
             _set_gates(ctx, fc, {k: "0" for k in FIRE_KEYS})
@@ -891,7 +926,7 @@ CRASH_GATES = ["crash_abort", "crash_x_alert", "crash_y_alert"]
                   "read as the three crash gates off by value (gates_off names them) with the "
                   "session OK; a threshold past the register range is refused; restored, the "
                   "gates read ok. The tiers themselves (BUMP, CRASH) trip only on a physical "
-                  "knock inside an armed window and are commissioned at the bench, not here.")
+                  "knock inside an armed window and are proven at the bench, not here.")
 def crash_watch_plumbing(ctx):
     fc = ctx.forgectrl
     ev = ctx.evidence
@@ -1212,7 +1247,6 @@ LOAD_LINES = 27                     # two 30 x 4 mm fills back to back, about 35
 LOAD_SHARE_MIN_C = 0.3              # the tube was lit inside the window
 LOAD_MARGIN_C = 1.0                 # the judged rise this far under the limit
 LOAD_VERDICT_WAIT_S = 120           # the window opens ~15 s into the session and runs 50 s
-LOAD_LOG_LINES = "300"
 _LOAD_LINE_RX = None
 
 
@@ -1236,9 +1270,19 @@ def _load_fill():
     return lines
 
 
-def _forgectrl_tail(fc):
+def _log_since(path, offset):
-    st, body = fc.get("/logs/tail", params={"name": "forgectrl", "lines": LOAD_LOG_LINES})
+    """The text a log gained since byte `offset`. A count of lines in a
-    return body.get("text", "") if st == 200 and isinstance(body, dict) else ""
+    tail of fixed length cannot tell a new line from an old one: the new
+    line comes in at the bottom as an old one leaves at the top. A file now
+    shorter than the offset was rotated under the test, and all of it is
+    newer."""
+    try:
+        with open(path, "rb") as f:
+            if os.fstat(f.fileno()).st_size >= offset:
+                f.seek(offset)
+            return f.read().decode("utf-8", "replace")
+    except OSError:
+        return ""
 
 
 @test("cooling.flow-under-load", title="The flow check reads true with the tube lit through its window",
@@ -1256,6 +1300,7 @@ def _forgectrl_tail(fc):
                   "the tube's share off and read its baseline as a mean.")
 def flow_under_load(ctx):
     from .laser import sample, prepare, LiveJob, ARM_CUE, run_and_sample, wait_disarm
+    from .motion import FORGECTRL_LOG, _log_offset
     fc = ctx.forgectrl
     ev = ctx.evidence
     state, check_s = _gate_state(fc, "cool_flow_check_s")
@@ -1263,7 +1308,7 @@ def flow_under_load(ctx):
     ctx.check(state != "off" and check_s, "the flow check is off (cool_flow_check_s=%s)", check_s)
     ctx.check(limit, "cool_flow_rise unreadable")
     ev.update({"check_s": check_s, "limit_c": limit})
-    before = _forgectrl_tail(fc).count("heater rise")
+    off = _log_offset(FORGECTRL_LOG)     # the verdict is a line written after this
     # The fill ends one line length out and (LOAD_LINES - 1) pitches up;
     # the job brings the head back so the baseline finds it where it began.
     back = "G0 X%g Y%g" % (-LOAD_WIDTH if LOAD_LINES % 2 else 0.0, -LOAD_PITCH * (LOAD_LINES - 1))
@@ -1298,12 +1343,11 @@ def flow_under_load(ctx):
             ctx.checkpoint()
             if hw.sysfs_int("thermal/heater_pwm", 0) > 0:
                 heater_seen = True
-            text = _forgectrl_tail(fc)
-            if text.count("heater rise") > before:
             m = None
-                for m in _load_verdict_rx().finditer(text):
+            for m in _load_verdict_rx().finditer(_log_since(FORGECTRL_LOG, off)):
                 pass
-                line = m.group(0) if m else None
+            if m:
+                line = m.group(0)
                 break
             ctx.sleep(1)
         ev["heater_seen"] = heater_seen
@@ -1329,3 +1373,162 @@ def flow_under_load(ctx):
     ctx.check(dt is not None, "the window did not close after M2")
     ctx.log("PASS: lit through the window, raw rise %.1f C, laser %.1f C off, judged %.1f C against %.1f "
             "(dT %.1f), window closed %.1f s after M2", raw, share, rise, float(limit), float(dtc), dt)
+
+
+@test("cooling.fan-duty-readback", title="A fan duty a device lost is read back and put back inside a tick",
+      subsystem="cooling", kind="auto", mode="grbl", est_min=2,
+      covers=_COOL_COVERS + [("kernel-module-glowforge", "src/head*")],
+      requires=["kernel.latch-locked-idle"],
+      description="M8 opens a run session and every fan reads its run duty back from its device. "
+                  "The head's air-assist register is then written back to the idle duty behind the "
+                  "engine's back (what a head reset or a dropped transaction leaves) and the exhaust "
+                  "PWM to zero: within a few ticks each reads its run duty again, the log names each "
+                  "loss and its put-back, and the session stays OK with no airflow fault (a fan put "
+                  "back gets its spin-up grace). Then M9 and the idle duties.")
+def fan_duty_readback(ctx):
+    fc = ctx.forgectrl
+    ev = ctx.evidence
+    run = {"head/air_assist_pwm": 1023, "thermal/exhaust_pwm": 65535, "thermal/intake_pwm": 43278}
+    with ctx.grbl() as g:
+        c = _hold_session(ctx, g, fc, lambda c: c.get("phase") == "run", "readback", 20)
+        try:
+            ctx.check(c.get("phase") == "run", "no run session opened: %s", c)
+            ctx.sleep(2)
+            before = {k: hw.sysfs_int(k) for k in run}
+            ctx.log("duties at run: %s", before)
+            ev["run_duties"] = before
+            ctx.check(all(before.get(k) == v for k, v in run.items()),
+                      "not every fan reads its run duty: %s", before)
+            hw.sysfs_write("head/air_assist_pwm", 204)
+            hw.sysfs_write("thermal/exhaust_pwm", 0)
+            lost = {k: hw.sysfs_int(k) for k in ("head/air_assist_pwm", "thermal/exhaust_pwm")}
+            ctx.log("written behind the engine's back: %s", lost)
+            back = {}
+            t0 = time.time()
+            while time.time() - t0 < 6:
+                ctx.sleep(0.5)
+                back = {k: hw.sysfs_int(k) for k in ("head/air_assist_pwm", "thermal/exhaust_pwm")}
+                if back.get("head/air_assist_pwm") == 1023 and back.get("thermal/exhaust_pwm") == 65535:
+                    break
+            took = round(time.time() - t0, 1)
+            ev["put_back"] = {"duties": back, "after_s": took}
+            ctx.log("put back after %s s: %s", took, back)
+            ctx.check(back.get("head/air_assist_pwm") == 1023, "the air-assist duty was not put back: %s", back)
+            ctx.check(back.get("thermal/exhaust_pwm") == 65535, "the exhaust duty was not put back: %s", back)
+            ctx.sleep(2)
+            ctx.check(_tail_has(fc, "head/air_assist_pwm read 204 with 1023 commanded: put back"),
+                      "the air-assist loss is not named in the log")
+            ctx.check(_tail_has(fc, "thermal/exhaust_pwm read 0 with 65535 commanded: put back"),
+                      "the exhaust loss is not named in the log")
+            for _ in range(8):
+                ctx.sleep(1)
+                c = _cool(fc)
+                if c.get("verdict") != "OK":
+                    break
+            ev["verdict_after"] = {"verdict": c.get("verdict"), "hold": c.get("hold"), "reason": c.get("reason")}
+            ctx.check(c.get("verdict") == "OK" and not c.get("hold"),
+                      "the session did not stay OK after the put-back: %s %s", c.get("verdict"), c.get("reason"))
+        finally:
+            g.command("M9")
+            _session_ended(ctx, fc, "readback")
+    idle = {k: hw.sysfs_int(k) for k in run}
+    ev["idle_duties"] = idle
+    ctx.log("duties at idle: %s", idle)
+
+
+@test("cooling.fail-tier-stop", title="A fail-tier verdict ends the controller: CRASH stops motion, "
+                                      "locks the laser, and the supervisor restarts the controller",
+      subsystem="cooling", kind="operator", mode="grbl", est_min=4,
+      covers=_COOL_COVERS + [("forgectrl", "src/super.*")],
+      requires=["cooling.crash-watch-plumbing", "motion.deadman"], actions=["button"],
+      steps=["Bed clear, lid closed, 40 mm of free +X travel. Nothing fires: the job is dark (S0).",
+             "Press the physical button when it lights white, once. The head moves and stops on "
+             "its own; the controller restarts."],
+      description="The engine's fail tiers (a lid IR fire signal, a head crash signal) do not "
+                  "leave the job to the controller: after the kernel writes (motion stopped, the "
+                  "latch locked) the engine ends the controller through the supervisor, which "
+                  "starts it again, so no run start can relight what was locked and the sender "
+                  "sees the job end. Provable without emission or a physical crash: the crash "
+                  "watch's thresholds at their lowest (1) make the head's own move trip the abort "
+                  "generator inside an armed, dark (S0) job. Expected: the engine logs the crash "
+                  "signal, the supervisor logs the stop and starts a new controller (new pid), the "
+                  "latch is locked, the kernel idle, no emission, the crash fault ends with the run "
+                  "session (the engine's next tick after the controller is gone), and the "
+                  "thresholds are put back.")
+def fail_tier_stop(ctx):
+    from .laser import prepare, stream, sample
+    from .motion import FORGECTRL_LOG, _log_lines, _log_offset
+    fc = ctx.forgectrl
+    ev = ctx.evidence
+    before = fc.settings()
+    orig = {k: before.get(k, "") for k in CRASH_KEYS}
+    ev["orig"] = orig
+    ctx.check(fc.wait_idle(15, abort=ctx.aborted), "machine not idle at the start")
+    st, m0 = fc.get("/mode")
+    ctx.check(st == 200 and isinstance(m0, dict) and m0.get("controller") == "running", "controller not running: %s", m0)
+    pid0 = m0.get("pid")
+    _set_gates(ctx, fc, {k: "1" for k in CRASH_KEYS})
+    off = _log_offset(FORGECTRL_LOG)
+    t_arm = None
+    try:
+        try:
+            with ctx.grbl() as g:
+                prepare(ctx, g)
+                ctx.ready("DARK JOB (S0, nothing fires). Bed clear with 40 mm of free +X travel, lid closed. "
+                          "The head moves 20 mm and the controller restarts on its own.")
+                stream(g, ["G91", "G21", "M3 S0", "G4 P1", "G1 X20 F1200", "G1 X-20 F1200", "M5", "G90", "M2"])
+                ctx.arm_press()
+                t_arm = ctx.wait_for(lambda: bool((sample(ctx) or {}).get("armed")), 240)
+                ctx.clear_notice()
+                ctx.check(t_arm is not None, "the window never opened (arm refused, or no press)")
+                t0 = time.time()
+                tripped = ctx.wait_for(lambda: _cool(fc).get("verdict") == "CRASH"
+                                       or (fc.get("/mode")[1] or {}).get("pid") not in (None, pid0), 30)
+                ctx.log("the crash tier tripped after %s s", tripped)
+        except (hw.HwError, OSError) as e:
+            ctx.log("the Grbl connection ended with the restart: %s", e)
+        t_kill = time.time()
+        m1 = None
+        while time.time() - t_kill < 60:
+            st, m1 = fc.get("/mode")
+            if isinstance(m1, dict) and m1.get("controller") == "running" and m1.get("pid") != pid0:
+                break
+            ctx.sleep(0.5)
+        # the daemon's lines reach the log file through syslog, a moment
+        # after the events they name
+        ctx.wait_for(lambda: bool(_log_lines(FORGECTRL_LOG, off, "HEAD CRASH SIGNAL"))
+                     and bool(_log_lines(FORGECTRL_LOG, off, "head crash signal - the controller is stopped")), 15)
+        engine = _log_lines(FORGECTRL_LOG, off, "HEAD CRASH SIGNAL")
+        super_ = _log_lines(FORGECTRL_LOG, off, "head crash signal - the controller is stopped")
+        smp = sample(ctx)
+        ilk = hw.sysfs_int("cnc/interlock_circuit")
+        ev["result"] = {"mode_after": m1, "engine_lines": [ln[-160:] for ln in engine[-2:]],
+                        "super_lines": [ln[-160:] for ln in super_[-2:]],
+                        "emission": smp and smp["emission"], "kernel": smp and smp["kstate"],
+                        "latch_locked": ilk is not None and bool(ilk & (1 << 3))}
+        ctx.log("after the crash tier: %s", ev["result"])
+        ctx.check(engine, "the engine did not log the crash signal")
+        ctx.check(super_, "the supervisor did not log the fail-tier stop")
+        ctx.check(m1 and m1.get("pid") != pid0, "the controller was not stopped and started again: %s", m1)
+        ctx.check(ev["result"]["latch_locked"], "latch not locked after the crash tier")
+        ctx.check(not (smp and smp["emission"]), "emission during a dark job: %s", smp and smp["emission"])
+        ctx.check(fc.wait_idle(30, abort=ctx.aborted), "machine not idle after the restart")
+        # The crash fault is the run session's: the engine ends the session
+        # on its next 1 Hz tick after the controller is gone, and the fault
+        # and its hold go with it. The supervisor has the new controller up
+        # inside that second, so a test that returned here would hand the
+        # machine back with the fault it raised still standing.
+        cleared = ctx.wait_for(lambda: _cool(fc).get("verdict") != "CRASH", 10)
+        ev["result"]["fault_cleared_s"] = cleared
+        ctx.log("the crash fault ended with the run session after %s s: %s", cleared,
+                {k: _cool(fc).get(k) for k in ("phase", "verdict", "hold", "armed")})
+        ctx.check(cleared is not None, "the crash fault did not end with the run session: %s", _cool(fc))
+    finally:
+        fc.wait_idle(30, abort=ctx.aborted)
+        st, body = fc.post("/settings", params=orig)
+        ctx.log("restore thresholds: POST /settings %s -> %s", orig, st)
+    after = fc.settings()
+    ctx.check(all(after.get(k, "") == orig[k] for k in CRASH_KEYS),
+              "thresholds not restored: %s", {k: after.get(k) for k in CRASH_KEYS})
+    ctx.log("PASS: the crash tier stopped the job, locked the latch, and the supervisor restarted "
+            "the controller (pid %s -> %s)", pid0, m1 and m1.get("pid"))

forgetest/forgetest/suite/forgectrl.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """forgectrl.* - the machine-services daemon's API, access control, and panel."""
 import json
 import os
@@ -56,6 +61,7 @@ def auth(ctx):
                          ("/mode", {"controller": "grbl"}), ("/settings", {"ui_units": "mm"}),
                          ("/diag/flow-verify", None), ("/diag/abort", None),
                          ("/update/apply", None), ("/boot", {"target": "a"}),
+                         ("/update/check", None), ("/update/dismiss", {"version": "v0.0.0"}),
                          ("/system/reboot", None), ("/restore/factory", None),
                          ("/restore/factory-return", {"confirm": "1"}), ("/system/ssh", {"enable": "1"}),
                          ("/wiz/advisories/accept", None), ("/wiz/account", None),
@@ -151,7 +157,7 @@ def auth(ctx):
     # HTTPS the route itself refuses the peer (403 loopback only). Neither
     # request follows the redirect, and the self-signed certificate is
     # not verified.
-    from .commission import request, decode
+    from .setup import request, decode
     ip = lan_ip()
     ev["lan_ip"] = ip
     ctx.check(ip, "cannot determine the board's LAN address")

forgetest/forgetest/suite/image.py

@@ -1,8 +1,14 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """image.* - the post-flash health of the running image (always-required)."""
 import glob
 import gzip
 import mmap
 import os
+import shutil
 import struct
 import re
 import stat
@@ -395,3 +401,140 @@ def license_bundle(ctx):
     text = bytes(body).decode("utf-8", "replace") if body else ""
     ctx.check("/system/licenses" in text and "PACKAGE NAME: " in text,
               "the Licenses page lacks the download link or the manifest")
+
+
+# ------------------------------------------------------- the network boot
+
+IFSTATE = "/var/run/ifstate"                # busybox ifupdown's state file
+INTERFACES = "/etc/network/interfaces"
+DHCP6_CLIENTS = ("udhcpc6", "dhcp6c", "odhcp6c")
+
+
+def ifstate_names(text):
+    """The interfaces ifup finished configuring: one name=name line each
+    in busybox's state file, written when ifup returns for the name."""
+    return {line.split("=", 1)[0].strip() for line in (text or "").splitlines() if "=" in line}
+
+
+def dhcp6_in_interfaces(text):
+    """The lines of an interfaces file that start a DHCPv6 client: an
+    inet6 stanza with a method that runs one, or a command that names
+    one. A comment starts nothing."""
+    bad = []
+    for raw in (text or "").splitlines():
+        words = raw.split("#", 1)[0].split()
+        if not words:
+            continue
+        if words[0] == "iface":
+            if len(words) >= 4 and words[2] == "inet6" and words[3] in ("dhcp", "auto"):
+                bad.append(" ".join(words))
+        elif any(w.split("/")[-1] in DHCP6_CLIENTS for w in words[1:]):
+            bad.append(" ".join(words))
+    return bad
+
+
+def parse_stat(text):
+    """(pid, comm, ppid) from a /proc/<pid>/stat line, or None. The comm
+    sits in parentheses and may itself hold spaces and parentheses."""
+    try:
+        head, tail = text.split("(", 1)
+        comm, rest = tail.rsplit(")", 1)
+        return int(head), comm, int(rest.split()[1])
+    except (ValueError, IndexError):
+        return None
+
+
+def _procs():
+    """(pid, ppid, comm, command line) of every process."""
+    out = []
+    for name in os.listdir("/proc"):
+        if not name.isdigit():
+            continue
+        st = parse_stat(_read("/proc/%s/stat" % name, ""))
+        if st is None:
+            continue
+        cmd = (_read("/proc/%s/cmdline" % name, "") or "").replace("\0", " ").strip()
+        out.append((st[0], st[2], st[1], cmd))
+    return out
+
+
+def link_addrs(text, iface):
+    """(link-local, global) IPv6 addresses of one interface, as the hex
+    strings of /proc/net/if_inet6 (address, index, prefix length, scope,
+    flags, name; scope 20 is the link, 00 the world)."""
+    local, world = [], []
+    for line in (text or "").splitlines():
+        f = line.split()
+        if len(f) == 6 and f[5] == iface:
+            if f[3] == "20":
+                local.append(f[0])
+            elif f[3] == "00":
+                world.append(f[0])
+    return local, world
+
+
+@test("image.network-boot", title="The boot does not wait on the network",
+      subsystem="image", kind="auto", est_min=1,
+      description="The network comes up without the boot waiting on a server. init starts the "
+                  "rest of the boot, the console login last, only after the networking script "
+                  "returns, so a client that waits in ifup's foreground on a server's answer "
+                  "holds the whole machine: no login, no SSH, no control panel. ifup has "
+                  "returned for wlan0 (it is in the state file and no ifup is running) and the "
+                  "console login is up; the DHCP client is the bounded one (-b, which leaves "
+                  "ifup after three unanswered discovers) and has left ifup; no DHCPv6 client "
+                  "is named in the interfaces file, running, or on the image; and IPv6 is the "
+                  "kernel's own: enabled on wlan0, router advertisements accepted, a link-local "
+                  "address up. A global address is evidence only, because a network whose "
+                  "router advertisement offers no SLAAC prefix gives none. What a hostile "
+                  "server does to a client is a bench drill, not a test. No component covers "
+                  "this: the interfaces file is layer content, in the platform identity of "
+                  "every fingerprint.")
+def network_boot(ctx):
+    ev = ctx.evidence
+    procs = _procs()
+
+    # 1. ifup came back, and the boot went on to the console login
+    state = ifstate_names(_read(IFSTATE, ""))
+    ev["ifstate"] = sorted(state)
+    ctx.check("wlan0" in state, "ifup has not finished wlan0: %s holds %s", IFSTATE, sorted(state))
+    stuck = [p for p in procs if p[2] in ("ifup", "ifdown")]
+    ev["ifup_running"] = [p[3] for p in stuck]
+    ctx.check(not stuck, "ifup is still running: %s", [p[3] for p in stuck])
+    logins = [p[3] for p in procs if p[2] == "getty"]
+    ev["getty"] = logins
+    ctx.check(any("ttymxc0" in c for c in logins), "no console login is running: %s", logins)
+
+    # 2. the DHCP client is the bounded one, and it has left ifup
+    v4 = [p for p in procs if p[2] == "udhcpc"]
+    ev["udhcpc"] = [p[3] for p in v4]
+    ctx.check(v4, "no DHCP client is running")
+    for pid, ppid, _comm, cmd in v4:
+        ctx.check("-b" in cmd.split(), "the DHCP client runs without -b: %s", cmd)
+        ctx.check(ppid == 1, "the DHCP client (pid %d) is still a child of pid %d", pid, ppid)
+
+    # 3. no DHCPv6 client: not started, not running, not on the image
+    text = _read(INTERFACES)
+    ctx.check(text is not None, "%s is missing", INTERFACES)
+    named = dhcp6_in_interfaces(text)
+    ev["interfaces_dhcp6"] = named
+    ctx.check(not named, "%s starts a DHCPv6 client: %s", INTERFACES, named)
+    alive = [p[3] for p in procs if p[2] in DHCP6_CLIENTS]
+    ev["dhcp6_running"] = alive
+    ctx.check(not alive, "a DHCPv6 client is running: %s", alive)
+    for name in DHCP6_CLIENTS:
+        ctx.check(shutil.which(name) is None, "%s is on the image", name)
+    ctx.check(not os.path.exists("/usr/share/udhcpc/default6.script"),
+              "the DHCPv6 hook script is on the image")
+
+    # 4. IPv6 is the kernel's own
+    conf = "/proc/sys/net/ipv6/conf/wlan0/"
+    ev["disable_ipv6"] = (_read(conf + "disable_ipv6", "") or "").strip()
+    ev["accept_ra"] = (_read(conf + "accept_ra", "") or "").strip()
+    ctx.check(ev["disable_ipv6"] == "0", "IPv6 is off on wlan0 (disable_ipv6=%r)", ev["disable_ipv6"])
+    ctx.check(ev["accept_ra"] not in ("", "0"),
+              "wlan0 does not accept router advertisements (accept_ra=%r)", ev["accept_ra"])
+    local, world = link_addrs(_read("/proc/net/if_inet6", ""), "wlan0")
+    ev["link_local"] = local
+    ev["global"] = world
+    ctx.check(local, "wlan0 has no link-local IPv6 address")
+    ctx.log("wlan0: %d link-local, %d global IPv6 address(es)", len(local), len(world))

forgetest/forgetest/suite/kernel.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """kernel.* - glowforge.ko safety readbacks and the pulse-engine drills.
 
 The drills are the bench scripts `scripts/bench/gate_a_kernel_drills.py`

forgetest/forgetest/suite/laser.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """laser.* - LIVE laser tests, ported from `scripts/bench/live_fire_drills.py`.
 
 Every test here can emit, except `laser.power-floor`, which only reads
@@ -252,6 +257,26 @@ def kill_trail(ctx, t0, seconds=5.0):
     return trail
 
 
+def kill_fast_trail(t0, seconds=1.5):
+    """The latch and the kernel state read from sysfs every few
+    milliseconds after a kill: the supervisor's own reaction, which the
+    HTTP samples of kill_trail cannot resolve. A controller death is a
+    signal to the supervisor, not a poll, so the relock lands within
+    milliseconds; the kernel leaves running once its stop ramp is done."""
+    locked_at = stopped_at = None
+    end = t0 + seconds
+    while time.time() < end and (locked_at is None or stopped_at is None):
+        now = time.time() - t0
+        ilk = hw.sysfs_int("cnc/interlock_circuit")
+        if locked_at is None and ilk is not None and ilk & IL_LASER_LATCH:
+            locked_at = round(now, 3)
+        st = hw.sysfs_read("cnc/state")
+        if stopped_at is None and st is not None and st != "running":
+            stopped_at = round(now, 3)
+        time.sleep(0.005)
+    return {"latch_locked_at_s": locked_at, "kernel_stopped_at_s": stopped_at}
+
+
 def judge_kill(ctx, trail, what):
     """(first zero, tail stayed zero, kernel stopped running) from a trail."""
     for t in trail:
@@ -715,7 +740,9 @@ def disarm_in_hold(ctx):
                   "SIGTERM, so emission drops within 2.5 s and stays 0, the kernel is not running, "
                   "and the restart is a separate operator-judged step. Unexpected: mid-burn SIGKILL "
                   "of the controller - the supervisor's exit safing must end the fire tail inside "
-                  "the ring's in-flight window, leave the latch locked, and respawn the controller.")
+                  "the ring's in-flight window, leave the latch locked, and respawn the controller. "
+                  "The death is a signal to the supervisor, not a poll: the latch relocks within "
+                  "300 ms of the kill and the kernel is out of running within a second.")
 def armed_kill(ctx):
     ev = ctx.evidence
     fc = ctx.forgectrl
@@ -769,13 +796,20 @@ def armed_kill(ctx):
         ctx.log("emission live (%s) - SIGKILL controller pid %s NOW", smp["emission"], pid)
         t_kill = time.time()
         _os.kill(pid, _signal.SIGKILL)
+        fast = kill_fast_trail(t_kill)
         trail = kill_trail(ctx, t_kill)
+    ctx.log("after the kill (sysfs): %s", fast)
     zero_at, tail_zero, not_running = judge_kill(ctx, trail, "kill")
     ilk = hw.sysfs_int("cnc/interlock_circuit")
     locked = ilk is not None and bool(ilk & (1 << 3))
     ev["sigkill"] = {"pid": pid, "zero_at_s": zero_at, "tail_zero": tail_zero,
-                     "kernel_not_running": not_running, "latch_locked": locked, "trail": trail}
+                     "kernel_not_running": not_running, "latch_locked": locked, "trail": trail,
+                     "fast": fast}
     ctx.log("latch locked after the kill: %s", locked)
+    ctx.check(fast["latch_locked_at_s"] is not None and fast["latch_locked_at_s"] < 0.3,
+              "the latch was not locked within 300 ms of the kill: %s", fast)
+    ctx.check(fast["kernel_stopped_at_s"] is not None and fast["kernel_stopped_at_s"] < 1.0,
+              "the kernel was still running 1 s after the kill: %s", fast)
     ctx.check(zero_at is not None and zero_at < 2.5,
               "emission did not drop within 2.5 s of the kill (first 0 at %s)", zero_at)
     ctx.check(tail_zero, "emission returned after the kill")
@@ -792,10 +826,187 @@ def armed_kill(ctx):
     ctx.log("/mode after the kill: %s", m1)
     ctx.check(m1 and m1.get("controller") == "running" and m1.get("pid") != pid,
               "supervisor did not respawn the controller: %s", m1)
+    # The respawned controller starts locked and stays locked: a latch it
+    # did not unlock is never relit by a run start, and no arm has asked.
+    ctx.check(wait_grbl_port(ctx), "the respawned controller never accepted a Grbl connection")
+    ctx.sleep(2)
+    ilk = hw.sysfs_int("cnc/interlock_circuit")
+    ev["latch_locked_after_respawn"] = ilk is not None and bool(ilk & IL_LASER_LATCH)
+    ctx.check(ev["latch_locked_after_respawn"],
+              "the respawned controller unlocked the latch with no arm (interlock_circuit=%s)", ilk)
     ev["beam_at_fire_kill"] = smp.get("beam")
     check_button_dark(ctx, ev)
     ctx.log("PASS: expected stop 0 at +%s s and SIGKILL 0 at +%s s, latch locked, controller "
-            "respawned, button dark", ev["expected"]["zero_at_s"], zero_at)
+            "respawned with the latch still locked, button dark", ev["expected"]["zero_at_s"], zero_at)
+
+
+@test("laser.verdict-cut", title="A blocked verdict mid-cut locks the latch and holds; the clean "
+                                 "verdict resumes with no press",
+      subsystem="laser", kind="live", mode="grbl", est_min=4,
+      covers=_LASER_COVERS,
+      requires=["laser.emission-witness"], actions=["button"],
+      steps=["Scrap under the head with 40 mm of free +X travel; lid closed; exhaust on.",
+             "Press the physical button when it lights white (the arm). Nothing else: the test "
+             "takes the cooling verdict away itself and gives it back."],
+      description="A 40 mm line at constant power (M3 S400/F300, 8 s). About 1.5 s in, the test "
+                  "pauses the machine-services daemon for 3.5 s, so the cooling verdict the "
+                  "controller reads goes stale: the controller's pause tier. The controller must "
+                  "hold the job (grbl Hold) under the still-open armed window with the stream "
+                  "masked dark, so the kernel's LASER_ON sample count reads 0 before the cut "
+                  "resumes, and it must not write the latch: a lock sets the hardware button "
+                  "latch, which only a press clears, so both bit 3 (the SoC lock) and bit 2 "
+                  "(the button latch) of interlock_circuit stay clear through the whole run. "
+                  "When the daemon returns (the verdict fresh, clean, resume_ok), the controller "
+                  "must resume the cut lit from where it stopped, with no button press and no "
+                  "prompt; the M2 program end then disarms as usual. The daemon's own dead-man "
+                  "(5 s of silence) is not reached: the controller keeps reporting through the "
+                  "pause. The beam detector witnesses the cut on both sides of the hold.")
+def verdict_cut(ctx):
+    import os as _os
+    import signal as _signal
+    ev = ctx.evidence
+    fc = ctx.forgectrl
+    # The daemon is frozen long enough for the verdict the controller
+    # caches to expire (VERDICT_MAX_AGE 2.0 s), so the driver's pause tier
+    # holds the job - but not so long that the engine's report dead-man
+    # trips on resume. That dead-man locks the laser latch when the
+    # controller's report is older than REPORT_TIMEOUT_S (5.0 s) while
+    # armed, which is exactly the "latch stayed locked" this test refuses.
+    # The last report is up to 1 s old when the freeze starts, so the
+    # freeze must stay under 4.0 s; 3.0 s clears the stale floor with room
+    # to see the hold and stays a full second under the dead-man.
+    PAUSE_S = 3.0
+    pids = hw.pidof("forgectrl")
+    ctx.check(pids, "no forgectrl process found to pause")
+    ev["daemon_pids"] = pids
+    state_path = "/run/forgefirm/grbl.state"
+
+    def grbl_state_file():
+        try:
+            with open(state_path) as f:
+                return f.read()
+        except OSError:
+            return ""
+
+    def resume_daemon():
+        for p in pids:
+            try:
+                _os.kill(p, _signal.SIGCONT)
+            except OSError:
+                pass
+
+    trail = []
+    text = ""
+    with ctx.grbl() as g, LiveJob(ctx, g):
+        prepare(ctx, g)
+        k0 = kernel_start(ctx)
+        base = sample(ctx)
+        ctx.check(base, "forgectrl /status or /cool/status unavailable")
+        ctx.check(not base["emission"], "emission_samples nonzero before the job (%s)", base["emission"])
+        ctx.ready(ARM_CUE % "40 mm +X")
+        job = ["G91", "G21", "M3", "S400", "G1 X40 F300", "M5", "G0 X-40", "G90", "M2"]
+        smp = arm_and_fire(ctx, g, room="40 mm +X", job=job)
+        beams = [(smp.get("beam"), smp.get("beam_d"))]
+        ctx.log("emission live (%s); pausing the daemon in 1 s", smp["emission"])
+        ctx.sleep(1.0)
+        g.drain()
+        t0 = time.time()
+        try:
+            for p in pids:
+                _os.kill(p, _signal.SIGSTOP)
+            ctx.log("daemon paused (SIGSTOP %s) for %.1f s: the verdict goes stale", pids, PAUSE_S)
+            # No HTTP while the daemon is paused: the controller's socket,
+            # sysfs and the controller's state file are the witnesses.
+            while time.time() - t0 < PAUSE_S:
+                st = g.status_report()["state"]
+                text += g.drain()
+                il = hw.sysfs_int("cnc/interlock_circuit")
+                trail.append({"t": round(time.time() - t0, 2), "gstate": st, "il": il,
+                              "emission": hw.sysfs_int("cnc/laser_on_sampled"),
+                              "armed": '"armed":true' in grbl_state_file()})
+                time.sleep(0.12)
+        finally:
+            resume_daemon()
+            ctx.log("daemon resumed (SIGCONT) at +%.2f s", time.time() - t0)
+        # Through the resume and to the end of the cut, sampling the same
+        # witnesses (the daemon's own once it answers again).
+        resumed_at = None
+        end = time.time() + 30
+        while time.time() < end:
+            ctx.checkpoint()
+            st = g.status_report()["state"]
+            text += g.drain()
+            il = hw.sysfs_int("cnc/interlock_circuit")
+            row = {"t": round(time.time() - t0, 2), "gstate": st, "il": il,
+                   "emission": hw.sysfs_int("cnc/laser_on_sampled"),
+                   "armed": '"armed":true' in grbl_state_file()}
+            if time.time() - t0 > PAUSE_S + 1.0:
+                s = sample(ctx)
+                if s:
+                    row["beam"] = s.get("beam")
+                    beams.append((s.get("beam"), s.get("beam_d")))
+            trail.append(row)
+            if resumed_at is None and st.startswith("Run"):
+                resumed_at = time.time() - t0
+            if st.startswith("Idle") and resumed_at is not None and time.time() - t0 > resumed_at + 3.0:
+                break
+            time.sleep(0.12)
+        for r in trail:
+            ctx.log("  %s", r)
+        ev["trail"] = trail
+        ev["messages"] = [ln for ln in text.splitlines() if ln.startswith("[MSG:") or ln.startswith("ALARM")]
+        ctx.log("controller: %s", ev["messages"])
+        dt = wait_disarm(ctx, 75)
+        ev["disarm_after_idle_s"] = round(dt, 1) if dt is not None else None
+        ctx.check(ctx.forgectrl.wait_idle(15, abort=ctx.aborted), "machine not idle after the job")
+        check_kernel_returned(ctx, ev, k0)
+
+    def locked(r):
+        return r["il"] is not None and bool(r["il"] & IL_LASER_LATCH)
+
+    def button_latched(r):
+        return r["il"] is not None and bool(r["il"] & IL_BUTTON_LATCH)
+
+    held = [r for r in trail if r["gstate"].startswith("Hold")]
+    ev.update({"held_at_s": held[0]["t"] if held else None,
+               "resumed_at_s": round(resumed_at, 2) if resumed_at else None,
+               "latch_locked_samples": sum(1 for r in trail if locked(r)),
+               "button_latch_set_samples": sum(1 for r in trail if button_latched(r))})
+    ctx.check(held and held[0]["t"] < PAUSE_S, "the stale verdict did not hold the job during the "
+              "pause (first Hold at %s)", ev["held_at_s"])
+    ctx.check("fire masked, job held" in text, "the controller did not report the pause tier")
+    ctx.check(ev["latch_locked_samples"] == 0,
+              "the pause tier wrote the latch (locked in %d samples): a lock sets the hardware "
+              "button latch and the resume would need a press", ev["latch_locked_samples"])
+    ctx.check(ev["button_latch_set_samples"] == 0,
+              "the hardware button latch read SET in %d samples: the resume needed a press",
+              ev["button_latch_set_samples"])
+    ctx.check(all(r["armed"] for r in trail if r["t"] < (resumed_at or PAUSE_S + 5)),
+              "the armed window closed during the pause")
+    ctx.check("press the button" not in text, "the resume asked for a button press")
+    ctx.check(DISARMED_MSG not in text.split("resuming")[0], "the pause tier disarmed the job")
+    # Dark from the hold until the resume: the gate masked the stream.
+    span = [r for r in trail if held and r["t"] >= held[0]["t"]
+            and (resumed_at is None or r["t"] < resumed_at)]
+    zero = next((r for r in span if r["emission"] == 0), None)
+    ev["emission_zero_after_hold_s"] = round(zero["t"] - held[0]["t"], 2) if zero else None
+    ctx.check(zero is not None and zero["t"] - held[0]["t"] <= 2.5,
+              "emission did not read 0 within 2.5 s of the hold (before the resume)")
+    ctx.check(resumed_at is not None, "the clean verdict did not resume the cut")
+    ctx.check("resuming" in text, "the controller did not report the resume")
+    after = [r for r in trail if resumed_at and r["t"] >= resumed_at]
+    ctx.check(any(r["emission"] for r in after), "the resumed cut ran dark (no emission after the resume)")
+    ctx.check("ALARM" not in text, "an alarm was raised on the pause tier")
+    ctx.check(dt is not None and dt < 10.0, "the M2 job did not disarm promptly at Idle (%s s)", dt)
+    beam_witness(ctx, ev, [{"beam": b, "beam_d": d} for b, d in beams], base)
+    judge_beam(ctx, ev["beam"], "the cut")
+    check_button_dark(ctx, ev)
+    ctx.log("PASS: held at +%s s with the latch untouched, emission 0 %s s after the hold, resumed "
+            "lit at +%s s with no press, disarmed %.1f s after Idle", ev["held_at_s"],
+            ev["emission_zero_after_hold_s"], ev["resumed_at_s"], dt)
+
+
+DISARMED_MSG = "laser disarmed - latch locked"
 
 
 @test("laser.arm-wait-lid", title="Lid open during the arm wait cancels the job",

forgetest/forgetest/suite/logs.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """logs.* - unified logging: the log tree, tail, and the sanitized export;
 the routing path (emitters, relays, rendered rules); the level settings."""
 import gzip
@@ -22,14 +27,46 @@ def _read(path, default=None):
 _LOG_COVERS = [("forgectrl", "src/logs.*"), ("forgectrl", "src/fflog.*"), ("forgectrl", "src/sanitize.*"),
                ("forgectrl", "src/main.c")]
 
+LOGS_ROOT = "/data/log/forgefirm"
+# What the export test plants in the installer's directory: a line to find
+# again, and two addresses (documentation ranges) the sanitizer must take.
+_PROBE_MARK = "forgetest export probe"
+_PROBE_MAC = "02:00:5e:10:20:30"
+_PROBE_IP = "192.0.2.77"
+
 
 @test("logs.tree-tail-export", title="Log tree, tail, and sanitized export", subsystem="logs",
       kind="auto", est_min=1,
       covers=_LOG_COVERS, requires=["forgectrl.auth"],
       description="/logs lists the loggers with their levels and files, /logs/tail returns the "
                   "forgectrl logger's tail, and POST /logs/export streams a sanitized tar.gz "
-                  "bundle that contains neither the panel token nor the camera key.")
+                  "bundle that contains neither the panel token nor the camera key. The bundle "
+                  "also carries the installer's directory of the tree (logs/install/), which no "
+                  "logger feeds: a probe file planted there for the export comes back in the "
+                  "bundle with its addresses redacted, and an install log that the installer "
+                  "left is in the bundle too.")
 def tree_tail_export(ctx):
+    install_dir = os.path.join(LOGS_ROOT, "install")
+    probe = os.path.join(install_dir, "forgetest-probe.txt")
+    made_dir = not os.path.isdir(install_dir)
+    try:
+        os.makedirs(install_dir, exist_ok=True)
+        with open(probe, "w") as f:
+            f.write("%s from %s at %s\n" % (_PROBE_MARK, _PROBE_MAC, _PROBE_IP))
+        _tree_tail_export(ctx, probe)
+    finally:
+        try:
+            os.unlink(probe)
+        except OSError:
+            pass
+        if made_dir:
+            try:
+                os.rmdir(install_dir)
+            except OSError:
+                pass
+
+
+def _tree_tail_export(ctx, probe):
     fc = ctx.forgectrl
     ev = ctx.evidence
     st, body = fc.get("/logs")
@@ -82,6 +119,21 @@ def tree_tail_export(ctx):
         ev[what.replace(" ", "_") + "_leaks"] = leaked
         ctx.check(not leaked, "the sanitized bundle contains the %s: %s", what, leaked)
 
+    # the installer's directory: no logger feeds it, the export carries it
+    by_name = dict(contents)
+    want = "logs/install/" + os.path.basename(probe)
+    got = [name for name in by_name if name.endswith(want)]
+    ev["install_members"] = sorted(name for name in by_name if "/logs/install/" in name)
+    ctx.check(got, "the bundle lacks %s: %s", want, ev["install_members"])
+    if got:
+        text = by_name[got[0]].decode("utf-8", "replace")
+        ctx.check(_PROBE_MARK in text, "the probe file came back without its line: %r", text)
+        for what, value in (("MAC address", _PROBE_MAC), ("IPv4 address", _PROBE_IP)):
+            ctx.check(value not in text, "the install directory left the sanitizer with its %s", what)
+    if os.path.isfile(os.path.join(os.path.dirname(probe), "install.log")):
+        ctx.check(any(name.endswith("logs/install/install.log") for name in by_name),
+                  "the machine has an install log and the bundle does not")
+
 
 # The routing test proves the whole path every logger takes: emitter (or
 # relay) -> /dev/log -> rsyslog rules rendered from the settings -> the
@@ -95,7 +147,6 @@ _ROUTING_COVERS = [("forgectrl", "src/logs.*"), ("forgectrl", "src/fflog.*"), ("
                    ("forgefirm-app", "forgefirm-app/ffmachine.py"), ("forgefirm-app", "forgefirm-app/gfcloud.py"),
                    ("forgefirm-app", "forgefirm-app/gfhome.py")]
 
-LOGS_ROOT = "/data/log/forgefirm"
 LOGGERS =("forgectrl", "grblhal", "gfcloud", "gfhome", "kernel", "system")
 _LINE_RE = re.compile(r"^\d{4}-\d\d-\d\dT\d\d:\d\d:\d\d(\.\d+)?[+-]\d\d:\d\d (?P<prog>[A-Za-z0-9_.-]+)\[(?P<pid>[-\d]+)\] "
                       r"(?P<sev>EMERG|ALERT|CRIT|ERR|WARNING|NOTICE|INFO|DEBUG) (?P<msg>.*)$")

forgetest/forgetest/suite/motion.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """motion.* - the motion controller under grblHAL: dry motion, no emission.
 
 Ported from `scripts/bench/pacing_test.py` (protocol-loop pacing) and
@@ -136,9 +141,68 @@ def clean_slate(ctx, g):
             ctx.log("unlock: %s", g.command("$X"))
     st = g.status_report()
     ctx.check(st["state"].startswith("Idle"), "controller is %s, expected Idle", st["state"])
+    clear_error(ctx, g)
     return st
 
 
+def clear_error(ctx, g):
+    """Clear a latched line error before the test's first move.
+
+    Soft limits are armed after a home (the driver's, since the bed has
+    no switches), so a jog past the bed is refused with error:15 - and
+    grblHAL then answers error:15 to every following G-code line, across
+    a fresh connection, until a blank line acknowledges it ($ commands
+    and the ? report are unaffected, so a sender that queries on connect
+    self-clears; a bare G-code stream does not). A prior test's or the
+    baseline hand-back's rejected jog would otherwise make this test's
+    first move fail with a stale error unrelated to the move. A blank
+    line clears it and returns ok. Harmless and idempotent at Idle."""
+    r = g.command("")
+    ctx.check(r and r[-1] == "ok" and not any(x.startswith("error") for x in r),
+              "the controller answered %s to a blank line at the start - not a clean parser", r)
+
+
+MOVE_START_S = 2.0      # Run is there within 100 ms; a loaded board gets this long
+
+
+def start_move(ctx, g, line):
+    """Start a travel job with `line` and see the controller in Run. The
+    wait is bounded, not a fixed sleep. When Run never comes, the failure
+    names what happened instead: the reply (a refused block answers
+    error), the state the controller sits in (Hold, Door, Alarm, or an
+    Idle that never took the block), every line it said meanwhile, and
+    the machine as forgectrl sees it - the evidence a bare "did not
+    start" leaves out. Recorded in the evidence either way."""
+    reply = g.command(line, timeout=1.0)
+    end = time.time() + MOVE_START_S
+    t0 = time.time()
+    said = ""
+    st = None
+    while time.time() < end:
+        ctx.checkpoint()
+        st = g.status_report()
+        if st["state"].startswith("Run"):
+            break
+        said += g.drain()
+        time.sleep(0.1)
+    rec = {"line": line, "reply": reply, "state": st["state"] if st else None,
+           "after_s": round(time.time() - t0, 2)}
+    ctx.evidence.setdefault("move_start", []).append(rec)
+    if st is not None and st["state"].startswith("Run"):
+        return st
+    msgs = [ln.strip() for ln in said.splitlines() if ln.strip()]
+    rec["said"] = msgs
+    s = ctx.forgectrl.status() or {}
+    gr = ((s.get("grbl") or {}).get("report") or {})
+    rec["forgectrl"] = {"state": s.get("state"), "switches": s.get("switches"),
+                        "laser_locked": s.get("laser_locked"), "grbl": gr.get("state"),
+                        "alarm": gr.get("alarm"), "sender": (gr.get("sender") or {}).get("connected")}
+    ctx.check(False, "the move did not start: %s answered %s; controller %s %.1f s later, said %s; "
+                     "forgectrl sees kernel %s, grbl %s (alarm %s), switches %s, laser locked %s",
+              line, reply, st["state"] if st else "no report", rec["after_s"], msgs or "nothing",
+              s.get("state"), gr.get("state"), gr.get("alarm"), s.get("switches"), s.get("laser_locked"))
+
+
 @test("motion.pacing", title="Protocol-loop pacing (idle, parked, moving) and hold/resume position",
       subsystem="motion", kind="auto", mode="grbl", est_min=1,
       covers=_MOTION_COVERS, requires=["kernel.latch-locked-idle"],
@@ -753,21 +817,30 @@ def _return_x(ctx, delta_mm):
     machine_idle(ctx)
 
 
-@test("motion.deadman", title="Dead-man: controller kill, controller hang, forgectrl restart mid-move",
+@test("motion.deadman", title="Dead-man: controller kill, controller hang, forgectrl restart mid-move, "
-      subsystem="motion", kind="auto", mode="grbl", est_min=4,
+                             "a kill during the web-service homing",
+      subsystem="motion", kind="auto", mode="grbl", est_min=6,
       covers=_MOTION_COVERS + [("forgectrl", "src/main.c"), ("forgectrl", "init/**")],
       requires=["motion.cancel-abort", "kernel.k1-k2"],
-      steps=["Bed clear; the head needs 40 mm of free +X travel and must not be at the left rail."],
+      steps=["Bed clear; the head needs 40 mm of free +X travel and must not be at the left rail. "
+             "With cloud mode enabled the test also homes through the web service and kills the "
+             "controller mid-homing (about a minute); the head ends wherever the homing was."],
       description="SIGKILL of the controller mid-move: the supervisor reaps it, safes (cnc/stop, "
                   "latch relocked - it never unlocked), and respawns within seconds. SIGSTOP (a "
                   "hang) mid-move: the ring drains into a kernel underrun (fast halt, latch "
                   "locked); the process resumed from the hang recovers on a soft reset and an unlock "
                   "(the alarm is critical, so $X alone is refused; the reset acknowledges the "
                   "fault to the stream and clears the stale ring) and moves again without a "
-                  "restart. forgectrl "
+                  "restart. A short SIGSTOP (100 ms, inside the kernel's 200 ms queue) mid-move: "
-                  "restart mid-move: the busy controller finishes the move unmanaged and the new "
+                  "no underrun, but the step producer comes back later than its lead and its "
-                  "daemon retakes supervision at idle. After each drill the head is jogged back "
+                  "late events clamp; unarmed that is a warning in the controller's log and the "
-                  "by the kernel-measured distance.")
+                  "move completes with every step (the armed case faults, proven on the host). "
+                  "forgectrl restart mid-move: the busy controller finishes the move unmanaged "
+                  "and the new daemon retakes supervision at idle. After each drill the head is "
+                  "jogged back by the kernel-measured distance. SIGKILL during $H (the web-service "
+                  "homing, with cloud mode enabled): the homing runner the controller left behind "
+                  "is ended before the respawn, the kernel is idle when the new controller starts, "
+                  "and the pulse device has one controller on it.")
 def deadman(ctx):
     import os as _os
     import signal as _signal
@@ -897,6 +970,47 @@ def deadman(ctx):
     x1 = _kernel_x_mm(ctx)
     _return_x(ctx, (x1 - x0) if (x0 is not None and x1 is not None) else None)
 
+    # ---- 2b. a short hang (inside the kernel queue): late events clamp, a warning, the move completes
+    m2 = wait_running(10)
+    pid2 = m2["pid"]
+    x0 = _kernel_x_mm(ctx)
+    underruns0 = hw.sysfs_int("cnc/underruns", 0)
+    log0 = _log_offset(GRBLHAL_LOG)
+    with ctx.grbl() as g:
+        clean_slate(ctx, g)
+        g.command("G91")
+        g.command("G1X30F300", timeout=0.5)     # ~6 s of motion
+        ctx.sleep(1.0)
+        _os.kill(pid2, _signal.SIGSTOP)
+        time.sleep(0.1)
+        _os.kill(pid2, _signal.SIGCONT)
+        ctx.log("SIGSTOP 100 ms sent to controller pid %d mid-move", pid2)
+        peak, states, st = wait_idle(ctx, g, 30)
+        g.command("G90")
+    machine_idle(ctx)                           # the kernel's tail plays out behind grbl's Idle
+    warned = None
+    t0 = time.time()
+    while time.time() - t0 < 5 and not warned:
+        lines = _log_lines(GRBLHAL_LOG, log0, "late events clamped")
+        warned = lines[-1] if lines else None
+        if not warned:
+            ctx.sleep(0.5)
+    x1 = _kernel_x_mm(ctx)
+    ev["short_stall"] = {"states": states, "underruns": hw.sysfs_int("cnc/underruns", 0) - underruns0,
+                         "warning": warned, "kernel_dx_mm": round((x1 - x0), 3) if (x0 is not None and x1 is not None) else None,
+                         "state_after": (st or {}).get("state")}
+    ctx.log("short stall: states %s, underruns +%s, warning %r, kernel dx %s mm", states,
+            ev["short_stall"]["underruns"], warned, ev["short_stall"]["kernel_dx_mm"])
+    ctx.check("TIMEOUT" not in states and str((st or {}).get("state", "")).startswith("Idle"),
+              "the move did not complete after the short stall (states %s)", states)
+    ctx.check(ev["short_stall"]["underruns"] == 0, "the short stall drained the ring (underruns +%s)",
+              ev["short_stall"]["underruns"])
+    ctx.check(warned, "the controller did not warn about the clamped events after the short stall")
+    ctx.check(ev["short_stall"]["kernel_dx_mm"] is not None and abs(ev["short_stall"]["kernel_dx_mm"] - 30.0) < 0.3,
+              "the kernel counted %s mm for a 30 mm move after the short stall", ev["short_stall"]["kernel_dx_mm"])
+    ctx.check(latch_locked(), "latch unlocked after the short stall")
+    _return_x(ctx, (x1 - x0) if (x0 is not None and x1 is not None) else None)
+
     # ---- 3. forgectrl restart mid-move: the move finishes, supervision retaken at idle
     m2 = wait_running(10)
     pid2 = m2["pid"]
@@ -934,8 +1048,226 @@ def deadman(ctx):
     x1 = _kernel_x_mm(ctx)
     _return_x(ctx, (x1 - x0) if (x0 is not None and x1 is not None) else None)
     machine_idle(ctx)
-    ctx.log("PASS: kill respawned in %s s, hang -> underrun in %s s, restart retook supervision (pid %s)",
+
-            respawn_s, halt_s, m3.get("pid"))
+    # ---- 4. SIGKILL during $H: the homing runner is ended, the kernel idle, one writer
+    homing_kill(ctx, wait_running)
+
+    ctx.log("PASS: kill respawned in %s s, hang -> underrun in %s s, short stall warned and completed, "
+            "restart retook supervision (pid %s), the kill during $H ended the runner (%s)",
+            respawn_s, halt_s, m3.get("pid"), ev.get("homing_kill", {}).get("runner_gone_s", "skipped"))
+
+
+def _pulse_holders():
+    """The processes holding the pulse device open, by name."""
+    out = []
+    for pid in os.listdir("/proc"):
+        if not pid.isdigit():
+            continue
+        try:
+            for fd in os.listdir("/proc/%s/fd" % pid):
+                if os.readlink("/proc/%s/fd/%s" % (pid, fd)) == "/dev/glowforge":
+                    with open("/proc/%s/comm" % pid) as f:
+                        out.append(f.read().strip())
+                    break
+        except OSError:
+            continue
+    return out
+
+
+def homing_kill(ctx, wait_running):
+    """SIGKILL the GRBL controller while gfhome (the web-service homing
+    runner, its own process group on the inherited pulse fd) is moving
+    the head. The supervisor must end the runner before it starts another
+    controller, or two processes write the ring. Skipped when cloud mode
+    is not enabled on the machine (the runner needs the service)."""
+    import os as _os
+    import signal as _signal
+    fc = ctx.forgectrl
+    ev = ctx.evidence
+    before = fc.settings()
+    if str(before.get("cloud_enabled", "")).lower() not in ("1", "true", "yes", "on"):
+        ctx.log("kill during $H: skipped, cloud mode is not enabled on this machine")
+        return
+    hm = before.get("homing_mode", "")
+    ev["homing_kill"] = {"homing_mode": hm}
+    if hm != "gfcloud":
+        st, body = fc.post("/settings", data={"homing_mode": "gfcloud"})
+        ctx.check(st == 200, "homing_mode=gfcloud -> %s %s", st, body)
+    try:
+        m4 = wait_running(10)
+        ctx.check(m4, "controller not running before the homing drill")
+        pid4 = m4["pid"]
+        off = _log_offset(FORGECTRL_LOG)
+        runner_up = None
+        try:
+            with ctx.grbl() as g:
+                clean_slate(ctx, g)
+                g.send_raw(b"$H\n")
+                runner_up = ctx.wait_for(lambda: bool(hw.pidof("gfhome.py")), 30)
+                ctx.check(runner_up is not None, "the homing runner never started for $H")
+                ctx.sleep(3.0)                  # into the session: the runner drives the head
+                ctx.log("SIGKILL sent to controller pid %d during $H (runner pid %s)",
+                        pid4, hw.pidof("gfhome.py"))
+                _os.kill(pid4, _signal.SIGKILL)
+        except (hw.HwError, OSError) as e:
+            ctx.log("the Grbl connection ended with the kill: %s", e)
+        t_kill = time.time()
+        gone_s = ctx.wait_for(lambda: not hw.pidof("gfhome.py"), 15)
+        ev["homing_kill"]["runner_gone_s"] = gone_s
+        ctx.check(gone_s is not None, "the homing runner outlived its controller")
+        m5 = None
+        while time.time() - t_kill < 60:
+            st, m5 = fc.get("/mode")
+            if isinstance(m5, dict) and m5.get("controller") == "running" and m5.get("pid") != pid4:
+                break
+            ctx.sleep(0.5)
+        kstate = hw.sysfs_read("cnc/state")
+        holders = _pulse_holders()
+        lines = _log_lines(FORGECTRL_LOG, off, "homing runner")
+        halted = _log_lines(FORGECTRL_LOG, off, "halting it")
+        ev["homing_kill"].update({"respawn_s": round(time.time() - t_kill, 1), "mode_after": m5,
+                                  "kernel_state_at_respawn": kstate, "pulse_holders": holders,
+                                  "super_lines": [ln[-160:] for ln in lines[-3:]]})
+        ctx.log("kill during $H: runner gone in %s s, respawned as %s, kernel %s, pulse held by %s",
+                gone_s, m5 and m5.get("pid"), kstate, holders)
+        ctx.check(m5 and m5.get("pid") != pid4, "no respawn after the kill during $H: %s", m5)
+        ctx.check(lines, "the supervisor did not log the runner's end")
+        ctx.check(not halted, "the kernel had to be halted for the respawn: %s", halted[-1:])
+        ctx.check(kstate in ("idle", "disabled"), "the kernel was %s when the new controller started", kstate)
+        ctx.check("gfhome.py" not in holders and holders.count("grblHAL_glowfor") <= 1,
+                  "more than one controller on the pulse device: %s", holders)
+        ctx.check(fc.wait_idle(15, abort=ctx.aborted), "machine not idle after the drill")
+    finally:
+        if hm != "gfcloud":
+            st, body = (fc.post("/settings", params={"homing_mode": ""}) if not hm
+                        else fc.post("/settings", data={"homing_mode": hm}))
+            ctx.log("restore homing_mode=%r -> %s", hm, st)
+
+
+@test("motion.respawn-gate", title="A respawn waits for the lid the way a first spawn does",
+      subsystem="motion", kind="operator", mode="grbl", est_min=2,
+      covers=_MOTION_COVERS, requires=["motion.deadman", "motion.gate-waits-for-lid"], actions=["lid"],
+      steps=["Bed clear. Open the lid when told and close it when told; nothing moves."],
+      description="The enclosure check runs before every controller spawn, respawns included. "
+                  "With the lid open, the controller is killed: the supervisor safes the machine "
+                  "(latch locked), reports waiting with why naming the lid, and starts no controller "
+                  "while the lid stays open. When the lid closes the controller comes back verified, "
+                  "without a second motion probe (the probe is once per broker hold).")
+def respawn_gate(ctx):
+    import os as _os
+    import signal as _signal
+    fc = ctx.forgectrl
+    ev = ctx.evidence
+    ctx.check(fc.wait_idle(15, abort=ctx.aborted), "machine not idle at the start")
+    st, m0 = fc.get("/mode")
+    ctx.check(st == 200 and isinstance(m0, dict) and m0.get("controller") == "running", "controller not running: %s", m0)
+    pid0 = m0.get("pid")
+    off = _log_offset(FORGECTRL_LOG)
+    ctx.act("lid", "open")
+    try:
+        ctx.sleep(1.0)
+        _os.kill(pid0, _signal.SIGKILL)
+        t_kill = time.time()
+        ctx.log("SIGKILL sent to controller pid %d with the lid open", pid0)
+        waited = ctx.wait_for(lambda: (fc.get("/mode")[1] or {}).get("controller") == "waiting", 15)
+        st, m1 = fc.get("/mode")
+        ev["after_kill"] = {"waiting_s": waited, "mode": m1}
+        ctx.log("mode %.1f s after the kill: %s", time.time() - t_kill, m1)
+        ctx.check(waited is not None, "the supervisor did not report waiting for the lid: %s", m1)
+        ctx.check("lid" in (m1.get("why") or ""), "why does not name the lid: %r", m1.get("why"))
+        ilk = hw.sysfs_int("cnc/interlock_circuit")
+        ctx.check(ilk is not None and ilk & (1 << 3), "latch not locked after the kill")
+        ctx.sleep(4.0)
+        st, m2 = fc.get("/mode")
+        ctx.check(isinstance(m2, dict) and m2.get("controller") == "waiting" and not m2.get("pid"),
+                  "the wait did not hold with the lid open: %s", m2)
+    finally:
+        ctx.act("lid", "close")
+    t_close = time.time()
+    came = ctx.wait_for(lambda: ((fc.get("/mode")[1] or {}).get("controller") == "running"
+                                 and (fc.get("/mode")[1] or {}).get("pid") != pid0), 60)
+    st, m3 = fc.get("/mode")
+    ev["after_close"] = {"running_s": came, "mode": m3}
+    ctx.log("mode %.1f s after the lid closed: %s", time.time() - t_close, m3)
+    ctx.check(came is not None and m3.get("motion") == "verified",
+              "the controller did not come back verified after the lid closed: %s", m3)
+    lines = _probe_lines(FORGECTRL_LOG, off)
+    ev["probe_lines"] = lines[-2:]
+    ctx.check(not lines, "the motion probe ran again for the respawn: %s", lines[:1])
+    ctx.check(fc.wait_idle(15, abort=ctx.aborted), "machine not idle at the end")
+    ctx.log("PASS: the respawn waited %.1f s for the lid, then came back verified in %.1f s with no probe",
+            t_close - t_kill, came)
+
+
+@test("motion.soft-limits", title="After a home the bed is the X/Y envelope",
+      subsystem="motion", kind="auto", mode="grbl", est_min=3,
+      covers=_MOTION_COVERS, requires=["motion.jog-roundtrip", "cloud.mode-switch"],
+      steps=["Bed clear, lid closed. The test homes the machine through the web service if it is "
+             "not homed (about a minute), then sends moves the controller must refuse."],
+      description="The machine has no limit switches, so the core's $20 cannot be turned on and "
+                  "the X/Y soft limits are the driver's: off while the position is not trusted, on "
+                  "after a home, when the envelope is the bed ($130 by $131 from the home corner). "
+                  "Homed, a program move 5 mm past X max or Y max, or past the near edge, raises "
+                  "ALARM:2 before any motion (the kernel counters do not move), a jog past the bed "
+                  "is refused with error 15, and a move inside the bed runs. The Z envelope is the "
+                  "lens window, as before.")
+def soft_limits(ctx):
+    from .cloud import gfhome_homing
+    fc = ctx.forgectrl
+    ev = ctx.evidence
+    with ctx.grbl() as g:
+        clean_slate(ctx, g)
+        if not fc.status().get("homed"):
+            gfhome_homing(ctx, ev, g)
+        ctx.check(fc.status().get("homed"), "the machine is not homed")
+        x_travel = float(grbl_setting(g, "$130"))
+        y_travel = float(grbl_setting(g, "$131"))
+        ev["travel"] = {"x": x_travel, "y": y_travel}
+        k0 = kernel_xy_mm(ctx)
+
+        def refused(cmd):
+            lines = g.command(cmd, timeout=2)
+            ctx.sleep(0.5)
+            text = "\n".join(lines) + g.drain()
+            k1 = kernel_xy_mm(ctx)
+            moved = max(abs(k1[0] - k0[0]), abs(k1[1] - k0[1]))
+            st = g.status_report()["state"]
+            rec = {"cmd": cmd, "reply": lines, "alarm": "ALARM:2" in text, "moved_mm": round(moved, 3), "state": st}
+            ctx.log("%s", rec)
+            ctx.check(rec["alarm"], "%s was not refused with ALARM:2: %s", cmd, lines)
+            ctx.check(moved < 0.05, "%s moved the kernel %.3f mm before the alarm", cmd, moved)
+            g.realtime(0x18)
+            ctx.sleep(1.5)
+            g.drain()
+            unlock = g.command("$X")
+            ctx.check(unlock and unlock[-1] == "ok", "$X after the soft-limit alarm: %s", unlock)
+            st = g.status_report()["state"]
+            ctx.check(st.startswith("Idle"), "controller is %s after the recovery", st)
+            return rec
+
+        ev["refused"] = [refused("G90 G1 X%.1f F600" % (x_travel + 5)),
+                         refused("G90 G1 Y%.1f F600" % (y_travel + 5)),
+                         refused("G90 G1 X-1 F600")]
+        # Homed still: the soft-limit alarm and its reset keep the reference.
+        ctx.check(fc.status().get("homed"), "the soft-limit alarm and the reset un-homed the machine")
+        jog = g.command("$J=G91X%.1fF1200" % (x_travel + 5))
+        ev["jog"] = jog
+        ctx.check(any(l.startswith("error:15") for l in jog), "a jog past the bed was not refused with error 15: %s", jog)
+        # The core answers the line after an error with that error again
+        # until an empty line clears it (the sender's acknowledgment).
+        g.command("")
+        g.command("G90 G1 X10 Y10 F600", timeout=0.5)
+        peak, states, st = wait_idle(ctx, g, 20)
+        ev["inside"] = states
+        ctx.check("TIMEOUT" not in states, "a move inside the bed did not run")
+        g.command("G90 G1 X0 Y0 F600", timeout=0.5)
+        wait_idle(ctx, g, 20)
+        k1 = kernel_start(ctx)                  # at rest: grbl's Idle leads the kernel's tail
+        ev["kernel_back_mm"] = [round(k1[0] - k0[0], 3), round(k1[1] - k0[1], 3)]
+        ctx.check(max(abs(k1[0] - k0[0]), abs(k1[1] - k0[1])) < 0.1, "the head did not come back to the corner: %s",
+                  ev["kernel_back_mm"])
+    ctx.log("PASS: X max, Y max and X min refused with ALARM:2 and no motion, the jog refused with "
+            "error 15, a move inside the bed ran")
 
 
 # ------------------------------------------------- lid / button (the factory's)
@@ -1066,9 +1398,7 @@ def button_hold_resume(ctx):
                   "moves; the job holds and the test sees it.")
         g.command("M5")
         g.command("G91")
-        g.command("G1X40F300", timeout=0.5)               # an 8 s move
+        start_move(ctx, g, "G1X40F300")               # an 8 s move
-        ctx.sleep(0.5)
-        ctx.check(g.status_report()["state"].startswith("Run"), "the move did not start")
         g.drain()                                     # the message window opens here
         w = Watch(g)
         ctx.act("button", "press", until=w.in_state("Hold"), timeout=12, fail=False)
@@ -1144,9 +1474,7 @@ def lid_cancel_home(ctx):
                   "leave it open until the head has come back on its own.")
         g.command("M5")
         g.command("G91")
-        g.command("G1X40F300", timeout=0.5)               # an 8 s move
+        start_move(ctx, g, "G1X40F300")               # an 8 s move
-        ctx.sleep(0.5)
-        ctx.check(g.status_report()["state"].startswith("Run"), "the move did not start")
         g.drain()                                     # the message window opens here
         ctx.act("lid", "open", text="Leave it open until the head has come back.", timeout=12)
         drift = expect_cancel_and_return(ctx, g, ev, start, k0, "lid opened", "running")
@@ -1239,9 +1567,7 @@ def interlock_cancel_home(ctx):
                   "moves and leave it open until the head has come back on its own.")
         g.command("M5")
         g.command("G91")
-        g.command("G1X60F300", timeout=0.5)               # a 12 s move
+        start_move(ctx, g, "G1X60F300")               # a 12 s move
-        ctx.sleep(0.5)
-        ctx.check(g.status_report()["state"].startswith("Run"), "the move did not start")
         g.drain()
         ctx.act("interlock", "open", text="Leave it open until the head has come back.", timeout=16)
         sw = (ctx.forgectrl.status().get("switches") or {})
@@ -1303,9 +1629,7 @@ def lid_policy_hold(ctx):
                       "the job parks in the door state and waits.")
             g.command("M5")
             g.command("G91")
-            g.command("G1X40F300", timeout=0.5)           # an 8 s move
+            start_move(ctx, g, "G1X40F300")           # an 8 s move
-            ctx.sleep(0.5)
-            ctx.check(g.status_report()["state"].startswith("Run"), "the move did not start")
             g.drain()
             ctx.act("lid", "open", timeout=12)
             st, text = wait_state_text(ctx, g, "Door", 8)

forgetest/forgetest/suite/setup.py

@@ -1,9 +1,14 @@
-"""commission.* - the first-run commissioning: the record and the
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
+"""setup.* - the first-run setup: the record and the
 controller gate, the advisories, the account and its login, the HTTPS
 boundary, SSH, the cloud switch, the machine's name, and the factory
 return.
 
-The daemon reads the commissioning record (commissioning.json in the
+The daemon reads the setup record (setup.json in the
 data directory) and the account record (users) once, at its start, and
 keeps them in memory; only its own routes write them. A test that needs
 a different record installs the file under a forgectrl restart (a
@@ -34,13 +39,13 @@ from ..catalog import test
 from .. import hw
 from .forgectrl import lan_ip
 
-RECORD = "commissioning.json"
+RECORD = "setup.json"
 USERS = "users"
-OVERRIDE = "commissioning-override"
+OVERRIDE = "setup-override"
 SSH_FLAG = "ssh-enabled"
 TLS_BASE = "https://127.0.0.1"          # FORGECTRL_TLS_URL overrides (host tests)
 
-# The image's required wizards, all at version 1 (commission.c).
+# The image's required wizards, all at version 1 (setup.c).
 REQUIRED_WIZARDS = ("advisories", "account", "preferences", "machine", "cloud")
 ADVISORY_DOCS = ("safety-and-risk", "licenses", "privacy", "cloud-service")
 SAFETY_PHRASE = "I UNDERSTAND"
@@ -176,8 +181,8 @@ def record_without_wizards(record):
 
 
 def complete_record(status, base=None, account_name="bench"):
-    """A complete commissioning record for a machine that must count as
+    """A complete setup record for a machine that must count as
-    commissioned: every advisory at the hash GET /wiz reports, the
+    set up: every advisory at the hash GET /wiz reports, the
     press recorded, an account (the one of `base` when it has one),
     every wizard of the catalog at its version, and the run complete.
     `status` is a GET /wiz body; `base` is an existing record to keep
@@ -352,12 +357,12 @@ def gate_is_open():
 
 # -------------------------------------------------------------- the gate
 
-_GATE_COVERS = [("forgectrl", "src/commission.*"), ("forgectrl", "src/super.c"),
+_GATE_COVERS = [("forgectrl", "src/setup.*"), ("forgectrl", "src/super.c"),
                 ("forgectrl", "src/main.c"), ("forgectrl", "src/paths.h")]
 
 
-@test("commission.gate-blocks-controllers", title="The commissioning gate spawns no controller",
+@test("setup.gate-blocks-controllers", title="The setup gate spawns no controller",
-      subsystem="commission", kind="auto", hardware="takeover", mode="grbl", est_min=5,
+      subsystem="setup", kind="auto", hardware="takeover", mode="grbl", est_min=5,
       covers=_GATE_COVERS, requires=["forgectrl.auth"], precheck=gate_is_open,
       description="With the override removed and a record that lacks every required wizard "
                   "(installed under a forgectrl restart, the consent and the account kept), "
@@ -374,11 +379,11 @@ def gate_blocks_controllers(ctx):
     ctx.log("before: gate %s, override %s, required %s", before.get("gate"), before.get("override"),
             before.get("required"))
     raw = read_file(record_path())
-    ctx.check(raw, "no commissioning record at %s", record_path())
+    ctx.check(raw, "no setup record at %s", record_path())
     try:
         record = json.loads(raw.decode("utf-8"))
     except ValueError as e:
-        ctx.fail("the commissioning record is not JSON: %s", e)
+        ctx.fail("the setup record is not JSON: %s", e)
     lacking = json.dumps(record_without_wizards(record), indent=1, sort_keys=True).encode() + b"\n"
     had_override = override_present()
     ev["override_before"] = had_override
@@ -391,7 +396,7 @@ def gate_blocks_controllers(ctx):
         ctx.log("/mode after the restart: %s (after %s s)", m, took)
         ctx.check(m.get("controller") == "gated" and m.get("gated") is True,
                   "the supervisor did not report the gate: %s", m)
-        ctx.check("commissioning required" in (m.get("why") or ""),
+        ctx.check("setup required" in (m.get("why") or ""),
                   "the reason does not name the missing wizards: %r", m.get("why"))
         w = wiz(fc)
         ev["gated_wiz"] = wiz_summary(w)
@@ -439,11 +444,11 @@ def gate_blocks_controllers(ctx):
     ctx.log("restored: gate %s, controller %s", after.get("gate"), m.get("controller"))
 
 
-@test("commission.override-until-reboot", title="The override stands until the next reboot",
+@test("setup.override-until-reboot", title="The override stands until the next reboot",
-      subsystem="commission", kind="auto", est_min=1,
+      subsystem="setup", kind="auto", est_min=1,
       covers=_GATE_COVERS, requires=["forgectrl.auth"],
       description="The bench seed: the dev image's forgetest init script writes "
-                  "/run/forgefirm/commissioning-override at boot. With it present, GET /wiz "
+                  "/run/forgefirm/setup-override at boot. With it present, GET /wiz "
                   "reports the override and an open gate, the reason names the wizards it lifts "
                   "when any is required, and GET /mode reports the controller running and not "
                   "gated. The file lives on tmpfs (/proc/mounts), so a reboot removes it by "
@@ -486,9 +491,9 @@ def override_until_reboot(ctx):
 
 # ------------------------------------------------------------ advisories
 
-@test("commission.advisories-rehash", title="An advisory is accepted at its current hash only",
+@test("setup.advisories-rehash", title="An advisory is accepted at its current hash only",
-      subsystem="commission", kind="auto", hardware="takeover", est_min=3,
+      subsystem="setup", kind="auto", hardware="takeover", est_min=3,
-      covers=[("forgectrl", "src/advisories.*"), ("forgectrl", "src/commission.*"),
+      covers=[("forgectrl", "src/advisories.*"), ("forgectrl", "src/setup.*"),
               ("forgectrl", "src/wiz.*"), ("forgectrl", "src/sha256.*"), ("forgectrl", "src/main.c"),
               ("forgectrl", "src/ui/md.js"), ("forgectrl", "src/ui/embed_docs.cmake")],
       requires=["forgectrl.auth"],
@@ -504,7 +509,7 @@ def advisories_rehash(ctx):
     fc = ctx.forgectrl
     ev = ctx.evidence
     raw = read_file(record_path())
-    ctx.check(raw, "no commissioning record at %s", record_path())
+    ctx.check(raw, "no setup record at %s", record_path())
     before = wiz(fc)
     ev["before"] = wiz_summary(before)
     docs = {d.get("id"): d for d in before.get("documents") or []}
@@ -579,7 +584,7 @@ def advisories_rehash(ctx):
 
 # -------------------------------------------------------------- the login
 
-@test("commission.account-login", title="The panel login over HTTPS", subsystem="commission",
+@test("setup.account-login", title="The panel login over HTTPS", subsystem="setup",
       kind="auto", est_min=2,
       covers=[("forgectrl", "src/auth.*"), ("forgectrl", "src/session.*"), ("forgectrl", "src/users.*"),
               ("forgectrl", "src/tls.*"), ("forgectrl", "src/peer.*"), ("forgectrl", "src/main.c"),
@@ -702,7 +707,7 @@ def login_checks(ctx, name, pw):
 
 # ------------------------------------------------------- HTTPS boundary
 
-@test("commission.https-only-writes", title="Writes from the LAN go to HTTPS", subsystem="commission",
+@test("setup.https-only-writes", title="Writes from the LAN go to HTTPS", subsystem="setup",
       kind="auto", est_min=1,
       covers=[("forgectrl", "src/auth.*"), ("forgectrl", "src/tls.*"), ("forgectrl", "src/peer.*"),
               ("forgectrl", "src/main.c")],
@@ -802,8 +807,8 @@ def restore_ssh(fc, before):
     write_file(flag, b"" if before.get("enabled") else None)
 
 
-@test("commission.ssh-until-reboot", title="SSH is switched from the panel until the next reboot",
+@test("setup.ssh-until-reboot", title="SSH is switched from the panel until the next reboot",
-      subsystem="commission", kind="auto", est_min=1,
+      subsystem="setup", kind="auto", est_min=1,
       covers=[("forgectrl", "src/main.c"), ("forgectrl", "src/paths.h")],
       requires=["forgectrl.auth"],
       description="GET /system/ssh reports enabled, running, and dev_image, and agrees with the "
@@ -888,8 +893,8 @@ def ssh_until_reboot(ctx):
 
 # ---------------------------------------------------------------- cloud
 
-@test("commission.cloud-disabled-surface", title="Nothing points at the cloud while it is off",
+@test("setup.cloud-disabled-surface", title="Nothing points at the cloud while it is off",
-      subsystem="commission", kind="auto", mode="grbl", est_min=1,
+      subsystem="setup", kind="auto", mode="grbl", est_min=1,
       covers=[("forgectrl", "src/main.c"), ("forgectrl", "src/super.c"), ("forgectrl", "src/settings.*"),
               ("forgectrl", "src/wiz.c"), ("forgectrl", "src/hooks.h")],
       requires=["forgectrl.settings-bounds"],
@@ -971,8 +976,8 @@ def cloud_disabled_surface(ctx):
 
 # ---------------------------------------------------------- the operator
 
-@test("commission.factory-return", title="The return to the factory firmware is guarded",
+@test("setup.factory-return", title="The return to the factory firmware is guarded",
-      subsystem="commission", kind="auto", est_min=1,
+      subsystem="setup", kind="auto", est_min=1,
       covers=[("forgectrl", "src/update.*"), ("forgectrl", "src/main.c"), ("forgectrl", "src/ui/wizard.js")],
       requires=["update.slots-and-signature"],
       description="The return itself reboots the machine as a Glowforge, so it never runs from the "
@@ -1034,8 +1039,8 @@ def cmdlines():
     return out
 
 
-@test("commission.machine-name", title="The machine names itself from its MAC address",
+@test("setup.machine-name", title="The machine names itself from its MAC address",
-      subsystem="commission", kind="auto", est_min=1,
+      subsystem="setup", kind="auto", est_min=1,
       requires=["forgectrl.auth"],
       description="The machine calls itself forgefirm-<xxxx>, where xxxx is the last four hex "
                   "digits of its WiFi MAC address, so two machines on one network answer to "
@@ -1213,12 +1218,12 @@ def finished_first_run(ctx):
               "the controller did not come back after the setup: %s", m)
 
 
-_FIRST_RUN_REQUIRES = ["commission.gate-blocks-controllers", "commission.advisories-rehash"]
+_FIRST_RUN_REQUIRES = ["setup.gate-blocks-controllers", "setup.advisories-rehash"]
 
 
-@test("commission.first-run-flow", title="The first run, driven as the page drives it", subsystem="commission",
+@test("setup.first-run-flow", title="The first run, driven as the page drives it", subsystem="setup",
       kind="operator", hardware="takeover", est_min=3,
-      covers=[("forgectrl", "src/wiz.*"), ("forgectrl", "src/commission.*"), ("forgectrl", "src/users.*"),
+      covers=[("forgectrl", "src/wiz.*"), ("forgectrl", "src/setup.*"), ("forgectrl", "src/users.*"),
               ("forgectrl", "src/session.*"), ("forgectrl", "src/button.*"), ("forgectrl", "src/led.*"),
               ("forgectrl", "src/sheetid.*"), ("forgectrl", "src/advisories.*"), ("forgectrl", "src/hooks.h"),
               ("forgectrl", "src/main.c")],
@@ -1309,11 +1314,11 @@ def first_run_flow(ctx):
         ctx.log("the run completed: gate open, the controller back")
 
 
-@test("commission.first-run-page", title="The first-run page, walked once", subsystem="commission",
+@test("setup.first-run-page", title="The first-run page, walked once", subsystem="setup",
       kind="operator", hardware="takeover", est_min=6,
       covers=[("forgectrl", "src/ui/wizard.*"), ("forgectrl", "src/ui/forms.js"), ("forgectrl", "src/ui/md.js"),
               ("forgectrl", "src/ui/login.*"), ("forgectrl", "src/ui/embed_docs.cmake"), ("forgectrl", "src/tls.*")],
-      requires=_FIRST_RUN_REQUIRES + ["commission.first-run-flow"],
+      requires=_FIRST_RUN_REQUIRES + ["setup.first-run-flow"],
       actions=["button"], hands=["workstation"],
       steps=["From the workstation open https://<address>/ and accept the self-signed certificate.",
              "Click through the setup: scroll each document to its end and accept it (type I "
@@ -1328,7 +1333,7 @@ def first_run_flow(ctx):
                   "clicks through (the documents accepted, the press step with the LEDs "
                   "breathing teal, the account created, the run complete, the gate open, the "
                   "controller back). The operator confirms the panel opened. Everything the run "
-                  "wrote is restored as commission.first-run-flow restores it.")
+                  "wrote is restored as setup.first-run-flow restores it.")
 def first_run_page(ctx):
     fc = ctx.forgectrl
     ev = ctx.evidence
@@ -1364,8 +1369,8 @@ def first_run_page(ctx):
         ctx.confirm("Did the control panel open after Finish?")
 
 
-@test("commission.cert-page", title="The certificate is checkable before the warning",
+@test("setup.cert-page", title="The certificate is checkable before the warning",
-      subsystem="commission", kind="auto", est_min=1,
+      subsystem="setup", kind="auto", est_min=1,
       covers=[("forgectrl", "src/tls.*"), ("forgectrl", "src/main.c"),
               ("forgectrl", "src/ui/wizard.html"), ("forgectrl", "src/ui/wizard.js")],
       requires=["forgectrl.auth"],
@@ -1423,9 +1428,9 @@ def flag_of(w, level, wid):
     return None
 
 
-@test("commission.what-changed", title="A replaced part asks for its checks again",
+@test("setup.what-changed", title="A replaced part asks for its checks again",
-      subsystem="commission", kind="auto", est_min=2, hardware="takeover",
+      subsystem="setup", kind="auto", est_min=2, hardware="takeover",
-      covers=[("forgectrl", "src/commission.*"), ("forgectrl", "src/wiz.*"), ("forgectrl", "src/main.c"),
+      covers=[("forgectrl", "src/setup.*"), ("forgectrl", "src/wiz.*"), ("forgectrl", "src/main.c"),
               ("forgectrl", "src/ui/panel.js"), ("forgectrl", "src/ui/index.html"),
               ("forgectrl", "src/ui/help.js")],
       requires=["forgectrl.auth"],
@@ -1493,9 +1498,9 @@ def what_changed(ctx):
     ctx.check(bool(mode(fc).get("gated")) == gated_before, "the gate does not read as before")
 
 
-@test("commission.record-export", title="The record: JSON, the printable page, and the log bundle",
+@test("setup.record-export", title="The record: JSON, the printable page, and the log bundle",
-      subsystem="commission", kind="auto", est_min=2,
+      subsystem="setup", kind="auto", est_min=2,
-      covers=[("forgectrl", "src/commission.*"), ("forgectrl", "src/recordhtml.*"), ("forgectrl", "src/wiz.*"),
+      covers=[("forgectrl", "src/setup.*"), ("forgectrl", "src/recordhtml.*"), ("forgectrl", "src/wiz.*"),
               ("forgectrl", "src/logs.*"), ("forgectrl", "src/main.c"), ("forgectrl", "src/ui/index.html"),
               ("forgectrl", "src/ui/panel.js"), ("forgectrl", "src/ui/wizard.html")],
       requires=["forgectrl.auth", "logs.tree-tail-export"],
@@ -1504,7 +1509,7 @@ def what_changed(ctx):
                   "named after the sheet id; GET /wiz/record.html is a page with no script that "
                   "carries the sheet id and every completed wizard; without the token and without "
                   "a login both are refused (403); and the sanitized log export carries "
-                  "system/commissioning.json, parseable, with the same sheet id and no panel token.")
+                  "system/setup.json, parseable, with the same sheet id and no panel token.")
 def record_export(ctx):
     import gzip
     import io
@@ -1544,7 +1549,7 @@ def record_export(ctx):
     ctx.check(st == 200 and "text/html" in (hdrs.get("content-type") or ""), "GET /wiz/record.html -> %s %s",
               st, hdrs.get("content-type"))
     ctx.check("<script" not in page.lower(), "the printable page carries a script")
-    ctx.check(sid in page and "commissioning record" in page, "the page lacks the sheet id or its title")
+    ctx.check(sid in page and "setup record" in page, "the page lacks the sheet id or its title")
     titles = {z["id"]: z["title"] for z in w.get("wizards") or []}
     missing = [d for d in done if titles.get(d) and ("<h3>" + titles[d]) not in page]
     ev["missing_on_page"] = missing
@@ -1565,11 +1570,11 @@ def record_export(ctx):
     try:
         tf = tarfile.open(fileobj=io.BytesIO(gzip.decompress(data)))
         for m in tf.getmembers():
-            if m.isfile() and m.name.endswith("system/commissioning.json"):
+            if m.isfile() and m.name.endswith("system/setup.json"):
                 member = tf.extractfile(m).read()
     except (OSError, tarfile.TarError, EOFError) as e:
         ctx.fail("export is not a readable tar.gz: %s", e)
-    ctx.check(member is not None, "the bundle lacks system/commissioning.json")
+    ctx.check(member is not None, "the bundle lacks system/setup.json")
     if member is not None:
         try:
             inside = json.loads(member.decode("utf-8"))
@@ -1587,12 +1592,12 @@ def record_export(ctx):
     ctx.log("record %d wizards; page %d bytes; bundle carries the record", len(done), ev["page_bytes"])
 
 
-@test("commission.mirror", title="One browser drives a check; a second one follows",
+@test("setup.mirror", title="One browser drives a check; a second one follows",
-      subsystem="commission", kind="auto", est_min=2, hardware="takeover",
+      subsystem="setup", kind="auto", est_min=2, hardware="takeover",
       covers=[("forgectrl", "src/wizdark.*"), ("forgectrl", "src/wizcalc.*"), ("forgectrl", "src/wiz.*"),
               ("forgectrl", "src/session.*"), ("forgectrl", "src/ui/wizard.js"),
               ("forgectrl", "src/ui/wizard.html"), ("forgectrl", "src/ui/wizard.css")],
-      requires=["forgectrl.auth", "commission.account-login", "commission.check-sensors"],
+      requires=["forgectrl.auth", "setup.account-login", "setup.check-sensors"],
       description="With a temporary account (made and removed as the login test does) and two "
                   "login sessions: the first session starts the sensors check; GET /wiz/dark "
                   "reports the run as owned and its own to the first session, not to the second, "

forgetest/forgetest/suite/setup_dark.py

@@ -1,4 +1,9 @@
-"""commission.check-* - the setup's checks (the dark wizards), driven the
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
+"""setup.check-* - the setup's checks (the dark wizards), driven the
 way the page drives them: POST /wiz/<id>/start, GET /wiz/dark polled,
 the prompts answered from here (the bench fixture works the lid and the
 button; a confirmation is answered yes once the snapshot exists), the
@@ -12,7 +17,7 @@ import time
 from ..catalog import test
 from .. import hw
 from ..baseline import read_position
-from .commission import wiz, Restore  # noqa: F401 - Restore is re-exported for the sheet
+from .setup import wiz, Restore  # noqa: F401 - Restore is re-exported for the sheet
 
 POLL_S = 1.0
 # What the machine's own press prompt says, used when it sends no text.
@@ -22,7 +27,7 @@ PRESS_TEXT = "The button is lit white. Press it now: the laser fires after your
 # (74) for the first seconds and settles near 630.
 PURGE_SPINUP_S = 30
 DARK_COVERS = [("forgectrl", "src/wizdark.*"), ("forgectrl", "src/wizcalc.*"),
-               ("forgectrl", "src/wiz.*"), ("forgectrl", "src/commission.*"),
+               ("forgectrl", "src/wiz.*"), ("forgectrl", "src/setup.*"),
                ("forgectrl", "src/main.c"), ("forgectrl", "src/ui/wizard.*")]
 
 
@@ -113,8 +118,8 @@ def run_check(ctx, wid, on_prompt, timeout_s):
     return last
 
 
-@test("commission.check-switches", title="The switches check follows the lid and the button",
+@test("setup.check-switches", title="The switches check follows the lid and the button",
-      subsystem="commission", kind="operator", est_min=3,
+      subsystem="setup", kind="operator", est_min=3,
       covers=DARK_COVERS + [("forgectrl", "src/status.c")],
       requires=["forgectrl.auth"], actions=["lid", "button"],
       description="POST /wiz/switches/start; the check asks for the lid to open and close and for "
@@ -148,30 +153,40 @@ def check_switches(ctx):
     ctx.log("switches: %s", json.dumps(r))
 
 
-@test("commission.check-sensors", title="The sensors check reads a plausible machine at rest",
+@test("setup.check-sensors", title="The sensors check reads a plausible machine at rest",
-      subsystem="commission", kind="auto", est_min=2,
+      subsystem="setup", kind="auto", est_min=2,
       covers=DARK_COVERS + [("forgectrl", "src/status.c"), ("forgectrl", "src/accel.c"),
                             ("forgectrl", "src/cool.c")],
       requires=["forgectrl.auth"],
-      description="POST /wiz/sensors/start; ten seconds of readings, then the room-temperature "
+      description="POST /wiz/sensors/start; ten seconds of readings and no question asked. The "
-                  "prompt, answered Skip so no offset is written. The result carries both coolant "
+                  "result carries both coolant temperatures, the chassis and SoC, the lid IR "
-                  "temperatures, the chassis and SoC, the lid IR maxima, the accelerometer event "
+                  "maxima, the accelerometer event count, the supply power-good, the HV current, "
-                  "count, the supply power-good, the HV current, and the idle fan speeds; the "
+                  "and the idle fan speeds; the record carries sensors at version 1 and the "
-                  "record carries sensors at version 1 and cool_temp_offset_c reads as before.")
+                  "settings read as before (the check writes none).")
 def check_sensors(ctx):
-    with Restore(ctx, ["cool_temp_offset_c"]):
+    fc = ctx.forgectrl
-        last = run_check(ctx, "sensors", lambda p: "Skip" if p.get("id") == "room-temp" else None, 120)
+    ev = ctx.evidence
+    before = fc.settings() or {}
+    ev["settings_before"] = dict(before)
+
+    def on_prompt(p):
+        ctx.fail("the sensors check asked a question: %s", p)
+    last = run_check(ctx, "sensors", on_prompt, 120)
     r = last.get("result") or {}
     for k in ("coolant_down_c", "coolant_up_c", "lid_ir_max", "laser_pgood", "hv_current_max",
               "exhaust_rpm_idle", "intake_rpm_idle"):
         ctx.check(k in r, "the result lacks %s: %s", k, r)
     ctx.check(r.get("laser_pgood") == 1, "power-good read %s", r.get("laser_pgood"))
+    after = fc.settings() or {}
+    changed = {k: (before.get(k), after.get(k)) for k in set(before) | set(after)
+               if before.get(k) != after.get(k)}
+    ctx.check(not changed, "the sensors check wrote a setting: %s", changed)
     ctx.log("sensors: coolant %s/%s C, IR %s, HV %s", r.get("coolant_down_c"), r.get("coolant_up_c"),
             r.get("lid_ir_max"), r.get("hv_current_max"))
 
 
-@test("commission.check-airflow", title="The airflow check measures the fans and sets the floors",
+@test("setup.check-airflow", title="The airflow check measures the fans and sets the floors",
-      subsystem="commission", kind="auto", hardware="takeover", est_min=3,
+      subsystem="setup", kind="auto", hardware="takeover", est_min=3,
       covers=DARK_COVERS + [("forgectrl", "src/cool.c"), ("forgectrl", "src/airflow.*"),
                             ("forgectrl", "src/gates.c"), ("forgectrl", "src/super.c")],
       requires=["forgectrl.auth", "cooling.fan-gate-trips"],
@@ -229,8 +244,8 @@ def check_airflow(ctx):
     ctx.check(ok is not None, "the controller did not come back after the check")
 
 
-@test("commission.check-cameras", title="The cameras check captures both cameras",
+@test("setup.check-cameras", title="The cameras check captures both cameras",
-      subsystem="commission", kind="operator", est_min=2,
+      subsystem="setup", kind="operator", est_min=2,
       covers=DARK_COVERS + [("forgectrl", "src/cam.c")],
       requires=["forgectrl.auth", "camera.snapshot"], actions=["lid"],
       description="POST /wiz/cameras/start with the lid closed: a lid snapshot, the question, a "
@@ -264,8 +279,8 @@ def check_cameras(ctx):
             shots.get("lid", {}).get("bytes", 0), shots.get("head", {}).get("bytes", 0))
 
 
-@test("commission.check-motion", title="The motion check proves the rail, the lens reference, and the jogs",
+@test("setup.check-motion", title="The motion check proves the rail, the lens reference, and the jogs",
-      subsystem="commission", kind="auto", hardware="takeover", est_min=5,
+      subsystem="setup", kind="auto", hardware="takeover", est_min=5,
       covers=DARK_COVERS + [("forgectrl", "src/super.c"), ("forgectrl", "src/liveness.c"),
                             ("forgectrl", "src/lenshome.*"),
                             ("forgectrl", "src/accel.c"), ("forgectrl", "src/cool.c")],
@@ -305,8 +320,8 @@ def check_motion(ctx):
             r.get("rest"), {k: (v.get("p2p_lp_x"), v.get("p2p_lp_y")) for k, v in moves.items()})
 
 
-@test("commission.check-flow-verify", title="The flow check runs as a setup check",
+@test("setup.check-flow-verify", title="The flow check runs as a setup check",
-      subsystem="commission", kind="auto", hardware="takeover", est_min=5,
+      subsystem="setup", kind="auto", hardware="takeover", est_min=5,
       covers=DARK_COVERS + [("forgectrl", "src/diag.c")],
       requires=["forgectrl.auth", "cooling.aa-offset-calibrate", "cooling.flow-verify"],
       description="POST /wiz/cooling.flow-verify/start drives the flow-verify diagnostic through the "
@@ -323,8 +338,8 @@ def check_flow_verify(ctx):
             r.get("flow_rise"), r.get("noflow_rise"), r.get("thin_margin"))
 
 
-@test("commission.cloud-header-capture", title="The cloud header check takes one print's envelope",
+@test("setup.cloud-header-capture", title="The cloud header check takes one print's envelope",
-      subsystem="commission", kind="operator", hardware="takeover", mode="grbl", est_min=8,
+      subsystem="setup", kind="operator", hardware="takeover", mode="grbl", est_min=8,
       covers=DARK_COVERS + [("forgectrl", "src/super.c"),
                             ("python3-gfhardware", "gfhardware/machine.py"),
                             ("python3-gfhardware", "forgefirm-app/gfcloud.py"),

forgetest/forgetest/suite/setup_sheet.py

@@ -1,4 +1,9 @@
-"""commission.sheet - the setup's sheet (the live wizards) in one run,
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
+"""setup.sheet - the setup's sheet (the live wizards) in one run,
 driven the way the page drives them: POST /wiz/<id>/start, GET /wiz/dark
 polled, the prompts answered from here, each burn armed by a press, the
 result judged, and every setting a wizard wrote put back as found. One
@@ -18,13 +23,13 @@ restored. The page is where the real numbers go in.
 import re
 
 from ..catalog import test
-from .commission_dark import run_check, Restore
+from .setup_dark import run_check, Restore
 
 SHEET_COVERS = [("forgectrl", "src/wizlive.*"), ("forgectrl", "src/wizrun.h"),
-                ("forgectrl", "src/sheet.*"),
+                ("forgectrl", "src/lens.*"), ("forgectrl", "src/sheet.*"),
                 ("forgectrl", "src/font_hershey.*"), ("forgectrl", "src/jobstream.*"),
                 ("forgectrl", "src/curverec.*"), ("forgectrl", "src/wizdark.*"),
-                ("forgectrl", "src/wiz.*"), ("forgectrl", "src/commission.*"),
+                ("forgectrl", "src/wiz.*"), ("forgectrl", "src/setup.*"),
                 ("forgectrl", "src/main.c"), ("forgectrl", "src/ui/wizard.*"),
                 ("forgectrl", "src/super.c"),
                 ("forgectrl", "src/status.c"), ("forgectrl", "src/cool.c"),
@@ -71,6 +76,22 @@ def preview_ok(ctx, wid):
     ctx.check(st == 200 and re.search(rb"^M[34] S\d", body or b"", re.M) is not None,
               "no program for %s (%s)", wid, st)
     ctx.evidence["program_lines"] = body.count(b"\n")
+    # Every Z the program commands is a height the head reaches in the
+    # window the machine holds now: the focus card's own numbers once it
+    # has them, and the conservative fallback on a head whose travel is
+    # not known yet. The controller refuses a Z outside it with ALARM:2,
+    # and it refuses it while the body is still burning, so the card dies
+    # where the parser is and not where the bad line is.
+    lens = (fc.status() or {}).get("lens") or {}
+    lo, hi = lens.get("reach_min"), lens.get("reach_max")
+    zs = [float(m) for m in re.findall(rb"^G0 Z(-?[0-9.]+)", body or b"", re.M)]
+    ctx.evidence.setdefault("program_z", {})[wid] = {
+        "z": zs, "reach": [lo, hi], "stops_found": lens.get("stops_found")}
+    ctx.check(lo is not None and hi is not None, "/status carries no lens reach: %s", lens)
+    if lo is not None and hi is not None:
+        out = [z for z in zs if z < lo - 0.01 or z > hi + 0.01]
+        ctx.check(not out, "%s commands Z outside the lens window %.2f..%.2f: %s",
+                  wid, lo, hi, out)
 
 
 def emission_ok(ctx, last):
@@ -89,6 +110,61 @@ def file_card(ctx, wid):
     ev.setdefault("cards", {})[wid] = {k: ev.pop(k) for k in CARD_EVIDENCE if k in ev}
 
 
+# The lens settings: the head's numbers, which a fresh machine does not
+# have. Cleared before the cards so the run is a fresh machine's.
+LENS_SETTINGS = CARD_SETTINGS[:3]
+FALLBACK_WINDOW = (10, 12)
+
+
+def fresh_lens(ctx):
+    """The lens as a fresh machine has it: the head's numbers unknown, so
+    the frame runs in the fallback window and the focus card has to find
+    the stops and write them before its ladder burns. The machine's own
+    numbers come back with the restore at the end of the run."""
+    fc = ctx.forgectrl
+    for k in LENS_SETTINGS:
+        st, _ = fc.post("/settings", params={k: ""})
+        ctx.check(st == 200, "clearing %s -> %s", k, st)
+    lens = (fc.status() or {}).get("lens") or {}
+    ctx.evidence["lens_fresh"] = lens
+    ctx.check(lens.get("stops_found") is False and (lens.get("below"), lens.get("above")) == FALLBACK_WINDOW,
+              "the lens window is not the fallback after the clear: %s", lens)
+
+
+def focus_window_ok(ctx):
+    """The window the focus card burned its ladder in is the one it wrote
+    before its controller started, and the one the machine holds now: the
+    result's window is the stops it found (or the fallback), the settings
+    hold that window, every ladder height lies in its reach, and the
+    program served now agrees with /status."""
+    fc = ctx.forgectrl
+    r = ((ctx.evidence.get("cards") or {}).get("laser.focus") or {}).get("result") or {}
+    w, stops = r.get("window") or {}, r.get("stops") or {}
+    s = fc.settings() or {}
+    held = (str(s.get("lens_stop_below_steps")), str(s.get("lens_stop_above_steps")))
+    ctx.check(held == (str(w.get("below")), str(w.get("above"))),
+              "the settings hold the window %s, the ladder ran in %s/%s", held, w.get("below"), w.get("above"))
+    if stops.get("found"):
+        ctx.check((w.get("below"), w.get("above")) == (stops.get("below"), stops.get("above")),
+                  "the ladder's window %s is not the stops found %s", w, stops)
+    else:
+        ctx.check((w.get("below"), w.get("above")) == FALLBACK_WINDOW,
+                  "stops not found (%s), but the ladder's window is %s", stops.get("why"), w)
+    zs = r.get("ladder_z") or []
+    lo, hi = w.get("reach_min"), w.get("reach_max")
+    out = [z for z in zs if lo is None or hi is None or z < lo - 0.01 or z > hi + 0.01]
+    ctx.check(len(zs) == 12 and not out, "ladder heights outside the reach %s..%s: %s", lo, hi, out or zs)
+    ev = ctx.evidence
+    before = dict(ev.get("program_z") or {}).get("laser.focus")
+    preview_ok(ctx, "laser.focus")
+    ev["focus_window"] = {"window": w, "stops": stops, "ladder_z": zs,
+                          "settings": {k: s.get(k) for k in LENS_SETTINGS},
+                          "program_z_before": before,
+                          "program_z_after": (ev.get("program_z") or {}).get("laser.focus"),
+                          "preview_bytes": ev.pop("preview_bytes", None),
+                          "program_lines": ev.pop("program_lines", None)}
+
+
 def thickness_answer(ctx):
     """The thickness the placement is answered with, in the machine's
     units (the number prompts read ui_units), and the millimeters the
@@ -151,10 +227,10 @@ def burn(ctx, wid, answers, want):
     file_card(ctx, wid)
 
 
-@test("commission.sheet", title="The commissioning sheet: the placement, the frame, and the five cards",
+@test("setup.sheet", title="The setup sheet: the placement, the frame, and the five cards",
-      subsystem="commission", kind="live", hardware="takeover", mode="grbl", est_min=35,
+      subsystem="setup", kind="live", hardware="takeover", mode="grbl", est_min=35,
       covers=SHEET_COVERS,
-      requires=["forgectrl.auth", "commission.check-motion", "laser.emission-witness", "cooling.flow-verify"],
+      requires=["forgectrl.auth", "setup.check-motion", "laser.emission-witness", "cooling.flow-verify"],
       actions=["button"], hands=["scrap"],
       steps=["A piece of wood at least 200 x 150 mm (8 x 6 in) on the bed, pushed as far left as "
              "it goes with its top edge at the top of the cut area (the head's home corner); "
@@ -167,15 +243,22 @@ def burn(ctx, wid, answers, want):
              "Nothing else: the test answers every prompt itself and puts back every setting the "
              "cards write. It runs about half an hour, mostly the coolant settle and the dark "
              "tails."],
-      description="One run over the sheet's seven wizards on one piece of wood. "
+      description="One run over the sheet's seven wizards on one piece of wood, as a fresh "
+                  "machine runs them: the three lens settings are cleared first, so the frame "
+                  "runs in the fallback window and the focus card has to find the stops and write "
+                  "them before its ladder burns. "
                   "POST /wiz/sheet.place/start references the lens, takes the controller in "
                   "loopback posture, jogs +X 10 and -X 10, and sets the origin at the head "
                   "(Full sheet; the thickness answered in the machine's units, 3.2 mm or "
                   "0.125 in). Then, each after the press and each with its preview "
-                  "and program served by GET /wiz/sheet.svg and /wiz/sheet.gcode: the frame "
+                  "and program served by GET /wiz/sheet.svg and /wiz/sheet.gcode, every Z the "
+                  "program commands inside the reach /status reports: the frame "
                   "(180 x 130 mm) and the header band at the mark dose; the focus card (the "
-                  "lens homed on its bottom stop, the hall edge counted, twelve lines down the "
+                  "lens on its hall edge, the stops found by the head accelerometer and written "
-                  "travel; the pick is line 11, the thickness kept); the floor card (twelve "
+                  "as the window before the controller starts, twelve lines from the top of the "
+                  "window to the bottom; the pick is line 11, the thickness kept; after it the "
+                  "settings, the result's window, and the served program must hold the window "
+                  "the ladder ran in); the floor card (twelve "
                   "rungs from 2 to 24 percent with the floor and the curve off for the job; the "
                   "pick is 8, the floor written is 10); the dose card (seven rungs sampled at "
                   "25 Hz, the curve fit on 20 s of dark); the corner card (five gammas reloaded "
@@ -191,6 +274,9 @@ def sheet(ctx):
               "each. The bench presses when the button lights.")
     place(ctx)
     with Restore(ctx, CARD_SETTINGS):
+        fresh_lens(ctx)
         for wid, answers, want in CARDS:
             burn(ctx, wid, answers, want)
-    ctx.log("PASS: the sheet's seven wizards ran on one piece; settings restored")
+            if wid == "laser.focus":
+                focus_window_ok(ctx)
+    ctx.log("PASS: the sheet's seven wizards ran on one piece as a fresh machine's; settings restored")

forgetest/forgetest/suite/update.py

@@ -1,5 +1,11 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """update.* - the A/B slot inventory and the firmware verification path."""
 import os
+import re
 import tempfile
 import time
 import shutil
@@ -8,6 +14,7 @@ from ..catalog import test
 from .. import hw
 
 _UPDATE_COVERS = [("forgectrl", "src/update.c"), ("forgectrl", "src/update.h"),
+                  ("forgectrl", "src/relcheck.c"), ("forgectrl", "src/relcheck.h"),
                   ("ffboot", "**")]
 
 
@@ -117,3 +124,76 @@ def slots_and_signature(ctx):
         except OSError:
             pass
         shutil.rmtree(work, ignore_errors=True)
+
+
+_VERSION_RX = re.compile(r"^v?\d+\.\d+\.\d+")
+
+
+@test("update.release-check", title="Release check answers from the releases API; the alert dismissal is per release",
+      subsystem="update", kind="auto", est_min=1,
+      covers=_UPDATE_COVERS + [("forgectrl", "src/ui/panel.js"), ("forgectrl", "src/ui/index.html")],
+      requires=["forgectrl.auth"],
+      description="GET /update/release answers the kept answer of the daily check (available, version, "
+                  "current, new, checked, dismissed). POST /update/check asks the releases API now and "
+                  "answers the same shape; a machine with no route to the API answers 502, which the drill "
+                  "records and steps over. A published release is a v<semver> tag with the firmware "
+                  "file's size and its notes, and `new` follows the version order: a development build "
+                  "sees every release as newer. POST /update/dismiss marks that version dismissed, an "
+                  "empty version undoes it, and a version that is not a tag is refused. The dismissal "
+                  "the machine had before the drill is put back.")
+def release_check(ctx):
+    fc = ctx.forgectrl
+    ev = ctx.evidence
+    keys = ("available", "version", "current", "new", "checked", "dismissed", "detail", "bytes")
+
+    st, before = fc.get("/update/release")
+    ctx.log("GET /update/release -> %s %s", st, {k: before.get(k) for k in keys} if isinstance(before, dict) else before)
+    ctx.check(st == 200 and isinstance(before, dict) and "available" in before and "checked" in before,
+              "GET /update/release -> %s", st)
+    ev["before"] = {k: before.get(k) for k in keys}
+    prior = before.get("version", "") if before.get("dismissed") else ""
+
+    st, now = fc.post("/update/check")
+    ctx.log("POST /update/check -> %s %s", st, {k: now.get(k) for k in keys} if isinstance(now, dict) else now)
+    if st == 502:
+        ctx.log("the machine has no route to the releases API; the kept answer stands")
+        now = before
+    else:
+        ctx.check(st == 200 and isinstance(now, dict) and "available" in now, "POST /update/check -> %s", st)
+        ctx.check(isinstance(now.get("checked"), int) and now["checked"] >= before.get("checked", 0),
+                  "the check did not move `checked`: %s", now.get("checked"))
+    ev["after_check"] = {k: now.get(k) for k in keys}
+
+    if now.get("available"):
+        ctx.check(_VERSION_RX.match(str(now.get("version", ""))) is not None,
+                  "the release version is not a v<semver> tag: %r", now.get("version"))
+        ctx.check(isinstance(now.get("bytes"), int) and now["bytes"] > 0,
+                  "the firmware file's size is missing: %r", now.get("bytes"))
+        ctx.check(isinstance(now.get("notes"), str), "the notes are not a string")
+        ctx.check(isinstance(now.get("new"), bool), "`new` is not a bool")
+        if not _VERSION_RX.match(str(now.get("current", ""))):
+            ctx.check(now.get("new") is True,
+                      "a development build (%r) must see release %s as newer", now.get("current"), now["version"])
+    else:
+        ctx.log("no release available: %s", now.get("detail"))
+        ctx.check(isinstance(now.get("detail"), str) and now["detail"], "an unavailable release names no reason")
+
+    try:
+        st, body = fc.post("/update/dismiss", params={"version": "v0.0.1; rm -rf /"})
+        ctx.log("POST /update/dismiss version=<not a tag> -> %s %s", st, body)
+        ctx.check(st == 400, "a version that is not a tag was not refused: %s", st)
+
+        tag = now["version"] if now.get("available") else "v0.0.0"
+        st, body = fc.post("/update/dismiss", params={"version": tag})
+        ctx.log("POST /update/dismiss version=%s -> %s %s", tag, st,
+                {k: body.get(k) for k in keys} if isinstance(body, dict) else body)
+        ctx.check(st == 200 and isinstance(body, dict), "POST /update/dismiss -> %s", st)
+        if now.get("available"):
+            ctx.check(body.get("dismissed") is True, "the dismissal of %s was not recorded: %r", tag, body.get("dismissed"))
+        st, body = fc.post("/update/dismiss", params={"version": ""})
+        ctx.log("POST /update/dismiss version= -> %s", st)
+        ctx.check(st == 200 and isinstance(body, dict) and body.get("dismissed") is False,
+                  "the empty version did not undo the dismissal: %s %r", st, body.get("dismissed") if isinstance(body, dict) else body)
+    finally:
+        st, body = fc.post("/update/dismiss", params={"version": prior})
+        ctx.log("dismissal put back to %r -> %s", prior, st)

forgetest/forgetest/ui/theme.css

@@ -206,6 +206,100 @@
   border-left: 4px solid var(--og-red);
 }
 
+/* ---- The release dialog -------------------------------------------- */
+#rel-view h3 {
+  font-size: 12px;
+  font-weight: 600;
+  letter-spacing: 0.04em;
+  text-transform: uppercase;
+  color: var(--og-dim);
+  margin: 12px 0 4px;
+}
+.relnotes {
+  max-height: 40vh;
+  overflow: auto;
+  border: 1px solid var(--og-line);
+  border-radius: 6px;
+  padding: 8px 12px;
+  margin: 4px 0 8px;
+  font-size: 13px;
+  line-height: 1.5;
+}
+.relnotes h1,
+.relnotes h2,
+.relnotes h3 {
+  font-size: 14px;
+  font-weight: 600;
+  margin: 10px 0 4px;
+}
+.relnotes h1:first-child,
+.relnotes h2:first-child,
+.relnotes h3:first-child {
+  margin-top: 0;
+}
+.relnotes p,
+.relnotes ul {
+  margin: 0 0 6px;
+}
+.relnotes ul {
+  padding-left: 20px;
+}
+.relnotes code {
+  font-size: 12px;
+}
+.relnotes table {
+  border-collapse: collapse;
+  margin: 4px 0 8px;
+}
+.relnotes th,
+.relnotes td {
+  border: 1px solid var(--og-line);
+  padding: 2px 8px;
+  text-align: left;
+}
+.relwarn {
+  background: var(--og-warn-bg);
+  border: 1px solid var(--og-warn);
+  color: var(--og-warn-txt);
+  border-radius: 8px;
+  padding: 10px 12px;
+  margin: 0 0 12px;
+  font-size: 14px;
+}
+.relsteps {
+  margin: 0 0 12px;
+  padding-left: 22px;
+  font-size: 13px;
+  line-height: 1.7;
+}
+.relsteps li {
+  color: var(--og-dim);
+}
+.relsteps li.cur {
+  color: var(--og-txt);
+  font-weight: 600;
+}
+.relsteps li.done {
+  color: var(--og-ok);
+}
+.relsteps li.done::after {
+  content: ' \2713';
+}
+.progress {
+  --bs-progress-bg: var(--og-line-soft);
+  --bs-progress-bar-bg: var(--og-action);
+  --bs-progress-height: 10px;
+  margin: 0 0 8px;
+}
+#rel-phase {
+  min-height: 1.4em;
+  font-size: 12.5px;
+  margin: 0;
+}
+#rel-err {
+  margin: 10px 0 0;
+}
+
 /* ---- Chrome: header, tabs, footer ---------------------------------- */
 body {
   margin: 0;

forgetest/tests/helpers.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """Shared fixtures for the forgetest unit tests: synthetic manifests and
 catalog entries that never touch hardware."""
 import hashlib

forgetest/tests/test_artifact.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 import copy
 import json
 import unittest

forgetest/tests/test_baseline.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The baseline: fixed resting values are restored, preserved values are
 handed back, every deviation is a recorded leftover. Runs against a fake
 sysfs tree; forgectrl is unreachable (service-side checks skip)."""
@@ -10,6 +15,11 @@ import unittest
 
 from forgetest import baseline
 
+# The fixed machine tick at the mode an unset xy_microsteps reads as.
+# Taken from baseline rather than typed, so a change to the default mode
+# moves the expectations with it.
+DEFAULT_TICK = dict(baseline.fixed_sysfs())["cnc/step_freq"]
+
 
 class BaselineTests(unittest.TestCase):
     def setUp(self):
@@ -21,8 +31,11 @@ class BaselineTests(unittest.TestCase):
         for name in baseline.BUTTON_LEDS + ("lid_led",):
             os.makedirs(self.leds + name)
             self._led(name, "0")
-        # a clean machine
+        # A clean machine at the mode an unset xy_microsteps reads as:
-        for attr, val in baseline.FIXED_SYSFS + baseline.IDLE_READBACKS:
+        # x/y_mode, step_freq and ramp_rate are the mode's, not the x8
+        # literals in FIXED_SYSFS, and that is what enforce() compares
+        # against.
+        for attr, val in baseline.fixed_sysfs() + baseline.IDLE_READBACKS:
             self._attr(attr, val)
         self._attr("cnc/interlock_circuit", "45")
         self._attr("pic/lid_led", "0")
@@ -90,7 +103,7 @@ class BaselineTests(unittest.TestCase):
         for x in left:
             self.assertEqual(x.action, "restored", str(x))
         self.assertEqual(self._read("cnc/motor_lock"), "0")
-        self.assertEqual(self._read("cnc/step_freq"), "28160")
+        self.assertEqual(self._read("cnc/step_freq"), DEFAULT_TICK)
         self.assertEqual(self._read("cnc/streaming"), "0")
         self.assertEqual(items["cnc/motor_lock"].found, "15")
         self.assertEqual(items["cnc/motor_lock"].expected, "0")
@@ -126,6 +139,21 @@ class BaselineTests(unittest.TestCase):
         self.assertTrue(items["position"].action.startswith("unrestorable"), items["position"].action)
         self.assertEqual(items["position"].found, [1000, 0, 0])
 
+    def test_the_counters_are_read_at_the_modes_scale(self):
+        # 6400 steps is 30 mm at x32 (a return within the bound; on the
+        # host it stops at the missing controller) and 120 mm at x8
+        # (beyond the bound). Read at the x8 scale, an x32 machine's
+        # displaced head is never jogged back.
+        b = self.bl()
+        cap = b.capture()
+        self._attr("cnc/x_mode", "32")
+        self._pos(6400, 0, 0)
+        items = {x.item: x for x in b.enforce("post", captured=cap)}
+        self.assertEqual(items["position"].action, "unrestorable: no running GRBL controller")
+        self._attr("cnc/x_mode", "8")
+        items = {x.item: x for x in b.enforce("post", captured=cap)}
+        self.assertEqual(items["position"].action, "unrestorable: 120.0/0.0 mm exceeds 100 mm")
+
     def test_a_held_controller_is_reset_before_the_return_jog(self):
         # a pause test that failed while held leaves the controller in
         # Hold, which refuses a jog: the baseline resets out of it first
@@ -138,14 +166,16 @@ class BaselineTests(unittest.TestCase):
             dev.on_command = lambda line: self._pos(0, 0, 0) if line.startswith("$J=") else None
             b = self.bl()
             cap = b.capture()
-            self._pos(221, 0, 0)                        # 4.144 mm into the held move
+            # 4.144 mm into the held move, in the steps of the mode in force
+            held_mm = 4.144
+            self._pos(round(held_mm * baseline.xy_steps_per_mm(baseline.XY_MODE_DEFAULT)), 0, 0)
             left = b.enforce("post", captured=cap)
             items = {x.item: x for x in left}
             self.assertTrue(items["position"].action.startswith("restored"), items["position"].action)
             self.assertEqual(dev.sent[0], "^X")
             jogs = [l for l in dev.sent if l.startswith("$J=")]
             self.assertEqual(len(jogs), 1)
-            self.assertIn("X-4.144", jogs[0])
+            self.assertIn("X-%.3f" % held_mm, jogs[0])
             self.assertTrue(any("reset out of Hold:0" in l for l in self.lines), self.lines)
         finally:
             dev.stop()
@@ -230,7 +260,7 @@ class BaselineTests(unittest.TestCase):
     def test_fixed_constants_checked_against_a_dump(self):
         ref = {"sysfs": {"cnc/motor_lock": "0", "cnc/step_freq": "10000"}}
         diffs = baseline.check_fixed_against(ref, self.lines.append)
-        self.assertEqual(diffs, ["cnc/step_freq: boot=10000 constant=28160"])
+        self.assertEqual(diffs, ["cnc/step_freq: boot=10000 constant=%s" % DEFAULT_TICK])
 
 
     # -- the reference is taken after the controller applied its config -----
@@ -249,7 +279,8 @@ class BaselineTests(unittest.TestCase):
         def sleep(_s):
             calls["n"] += 1
             if calls["n"] == 3:             # the controller's init writes land
-                for attr, val in baseline.CONFIGURED_MARKERS:
+                # at the mode wait_controller_configured watches by default
+                for attr, val in baseline.configured_markers():
                     self._attr(attr, val)
         ok = baseline.wait_controller_configured(
             self.lines.append, {"controller": "running", "mode": "grbl", "motion": "verified"},
@@ -287,11 +318,15 @@ class BaselineTests(unittest.TestCase):
     def test_preconfig_reference_is_recognized(self):
         self.assertTrue(baseline.reference_preconfig(
             {"sysfs": {"cnc/motor_lock": "0", "cnc/step_freq": "10000", "cnc/y_mode": "1"}}))
+        # The markers are read at the reference's own mode, so a dump taken
+        # on an x8 machine carries the setting that says so.
         self.assertFalse(baseline.reference_preconfig(
-            {"sysfs": {"cnc/motor_lock": "8", "cnc/step_freq": "28160", "cnc/y_mode": "8"}}))
+            {"sysfs": {"cnc/motor_lock": "8", "cnc/step_freq": "28160", "cnc/y_mode": "8"},
+             "forgectrl": {"/settings": {"xy_microsteps": "8"}}}))
         # a genuinely different single constant is a machine fact, not pre-config
         self.assertFalse(baseline.reference_preconfig(
-            {"sysfs": {"cnc/motor_lock": "8", "cnc/step_freq": "10000", "cnc/y_mode": "8"}}))
+            {"sysfs": {"cnc/motor_lock": "8", "cnc/step_freq": "10000", "cnc/y_mode": "8"},
+             "forgectrl": {"/settings": {"xy_microsteps": "8"}}}))
         self.assertFalse(baseline.reference_preconfig({"sysfs": {}}))
 
     # -- the XY microstep mode drives the fixed values ------------------------
@@ -310,16 +345,18 @@ class BaselineTests(unittest.TestCase):
         self.assertEqual(x32["cnc/x_decay"], x8["cnc/x_decay"])
 
     def test_the_mode_is_read_from_the_settings_with_a_default(self):
+        # An unset or unusable key reads as the driver's default, x32.
         self.assertEqual(baseline.xy_mode_of({"xy_microsteps": "16"}), 16)
         self.assertEqual(baseline.xy_mode_of({"xy_microsteps": "32"}), 32)
-        self.assertEqual(baseline.xy_mode_of({"xy_microsteps": ""}), 8)
+        self.assertEqual(baseline.xy_mode_of({"xy_microsteps": "8"}), 8)
-        self.assertEqual(baseline.xy_mode_of({}), 8)
+        self.assertEqual(baseline.xy_mode_of({"xy_microsteps": ""}), 32)
-        self.assertEqual(baseline.xy_mode_of(None), 8)
+        self.assertEqual(baseline.xy_mode_of({}), 32)
-        self.assertEqual(baseline.xy_mode_of({"xy_microsteps": "24"}), 8)
+        self.assertEqual(baseline.xy_mode_of(None), 32)
-        self.assertEqual(baseline.xy_mode_of({"xy_microsteps": "abc"}), 8)
+        self.assertEqual(baseline.xy_mode_of({"xy_microsteps": "24"}), 32)
+        self.assertEqual(baseline.xy_mode_of({"xy_microsteps": "abc"}), 32)
         self.assertEqual(baseline.ref_xy_mode({"forgectrl": {"/settings": {"xy_microsteps": "16"}}}), 16)
-        self.assertEqual(baseline.ref_xy_mode({"forgectrl": {"/settings": None}}), 8)
+        self.assertEqual(baseline.ref_xy_mode({"forgectrl": {"/settings": None}}), 32)
-        self.assertEqual(baseline.ref_xy_mode({}), 8)
+        self.assertEqual(baseline.ref_xy_mode({}), 32)
 
     def test_fixed_constants_are_checked_at_the_reference_mode(self):
         ref = {"sysfs": {"cnc/x_mode": "16", "cnc/step_freq": "56320", "cnc/ramp_rate": "250000"},
@@ -400,6 +437,81 @@ class TransientNotLeftoverTests(BaselineTests):
         self.assertEqual(items[0].found, "1014")
 
 
+class CoolPublishTests(unittest.TestCase):
+    """The cooling engine publishes once a tick. A status read inside the
+    tick after a run ended is the engine's last word on the run, not the
+    machine as the run left it. Found on the bench reference: a diagnostic
+    that finished clean (cooling.aa-offset-calibrate) and a fail tier that
+    did its work (cooling.fail-tier-stop) both failed their hand-back on a
+    hold the engine's next tick cleared."""
+
+    IDLE = {"phase": "idle", "armed": False, "hold": False}
+
+    def setUp(self):
+        self.lines = []
+
+    def bl(self, statuses):
+        """A baseline whose /cool/status answers play in order (the last
+        one repeats) and whose waits count reads, not seconds: three for
+        the engine's next tick, as the real wait makes, and enough for the
+        cooldown to let a slow script run out."""
+        b = baseline.Baseline(self.lines.append)
+        seq = list(statuses)
+        b.fc_get = lambda path: (200, dict(seq.pop(0) if len(seq) > 1 else seq[0]))
+
+        def wait(what, pred, timeout):
+            for i in range(3 if what == "cool publish" else 50):
+                if pred():
+                    return float(i)
+            return None
+        b._wait = wait
+        b.stood_down = []
+        b.stand_down = b.stood_down.append
+        return b
+
+    def test_a_diagnostic_hold_the_next_tick_clears_is_not_a_leftover(self):
+        left = []
+        b = self.bl([{"phase": "diag", "armed": False, "hold": True}, self.IDLE])
+        b._cool_side(left)
+        self.assertEqual(left, [])
+        self.assertTrue(any("last word on the run" in ln for ln in self.lines), self.lines)
+
+    def test_a_fail_tier_hold_clears_into_the_engines_own_post_job_phase(self):
+        left = []
+        b = self.bl([{"phase": "run", "armed": False, "hold": True},
+                     {"phase": "smoke", "armed": False, "hold": False},
+                     {"phase": "smoke", "armed": False, "hold": False}, self.IDLE])
+        b._cool_side(left)
+        self.assertEqual(left, [])
+        self.assertTrue(any("not a leftover" in ln for ln in self.lines), self.lines)
+
+    def test_a_hold_that_outlives_the_tick_is_the_runs_doing(self):
+        left = []
+        b = self.bl([{"phase": "run", "armed": True, "hold": True}])
+        b._cool_side(left)
+        self.assertEqual([x.item for x in left], ["cool"])
+        self.assertEqual(left[0].found, "run/armed=True/hold=True")
+        self.assertTrue(left[0].action.startswith("failed: still"), left[0].action)
+        self.assertEqual(len(b.stood_down), 1)
+
+    def test_a_hold_that_clears_only_later_is_still_recorded(self):
+        left = []
+        held = {"phase": "run", "armed": False, "hold": True}
+        b = self.bl([held] * 10 + [self.IDLE])
+        b._cool_side(left)
+        self.assertEqual([x.item for x in left], ["cool"])
+        self.assertEqual(left[0].action, "waited")
+        self.assertEqual(b.stood_down, [])
+
+    def test_an_idle_engine_and_a_silent_daemon_leave_nothing(self):
+        left = []
+        self.bl([self.IDLE])._cool_side(left)
+        b = baseline.Baseline(self.lines.append)
+        b.fc_get = lambda path: (None, None)
+        b._cool_side(left)
+        self.assertEqual(left, [])
+
+
 class CloudOwnedSysfsTests(unittest.TestCase):
     """In cloud mode the cloud client configures the machine from the
     pulse header it is playing, the lens included: z_mode comes from
@@ -434,6 +546,13 @@ class PositionDeadbandTests(unittest.TestCase):
         self.assertFalse(baseline.position_quantized([0, 0, 0], [over, 0, 0]))
         self.assertFalse(baseline.position_quantized([0, 0, 0], [0, over, 0]))
 
+    def test_the_dead_band_scales_with_the_counters(self):
+        # the same step count is a quarter of the distance at x32
+        over = int(baseline.POSITION_DEADBAND_MM * baseline.XY_STEPS_PER_MM) + 2
+        x32 = baseline.XY_STEPS_PER_MM_OF[32]
+        self.assertTrue(baseline.position_quantized([0, 0, 0], [over, 0, 0], x32))
+        self.assertFalse(baseline.position_quantized([0, 0, 0], [4 * over, 0, 0], x32))
+
     def test_z_is_exact_because_the_return_never_moves_it(self):
         self.assertFalse(baseline.position_quantized([0, 0, 0], [0, 0, 1]))
 
@@ -549,7 +668,7 @@ class BaselineModeTests(BaselineTests):
         self._attr("pic/lid_led", "77")
         left = self.bl().enforce("pre", captured=None)
         self.assertEqual(sorted(x.item for x in left), ["cnc/step_freq", "pic/lid_led"])
-        self.assertEqual(self._read("cnc/step_freq"), "28160")
+        self.assertEqual(self._read("cnc/step_freq"), DEFAULT_TICK)
         self.assertEqual(self._read("pic/lid_led"), "236")
 
     def test_cloud_mode_leaves_the_clients_config_lamp_and_counters(self):

forgetest/tests/test_bench_registry.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The bench registry against scripts/bench: every python tool is
 registered (or named as not-a-tool), every registered script exists,
 every argument spec builds a command line, every script compiles, and

forgetest/tests/test_campaign.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 import unittest
 
 import helpers

forgetest/tests/test_cloud_needles.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """Every phrase the cloud suite greps for in the gfcloud log must be a
 phrase the pinned cloud app can actually log.
 

forgetest/tests/test_cloud_suite.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The cloud.* job-behavior tests against a fake forgectrl and a replayed
 gfcloud log: the real test functions run under the real runner Context,
 the operator prompts answered - and the standing notices of the machine
@@ -558,12 +563,16 @@ class CloudSuiteTests(unittest.TestCase):
     HUNT_RUN_SAMPLE = {"phase": "run", "verdict": "ok", "armed": False,
                        "fan_gates": {"exhaust": {"state": "unjudged", "reading": 0, "floor": 500}}}
 
-    def mode_switch_setup(self, hunt_lines=None, home_complete=True):
+    def mode_switch_setup(self, hunt_lines=None, home_complete=True, lid_late=False):
         """The fakes a mode-switch run needs: grbl to answer $H, the lid
         lamp attr, homing_mode = gfcloud, the service lines landing on
-        the switch to cloud (the hunt reads as a run to the cooling
+        the switch to cloud - the client's start at once, its session and
-        engine while it lasts), the re-hunt on the lid close, and gfhome
+        hunt once the lid reads open, as on the bench where the lid opens
-        finishing the homing after $H."""
+        behind the controller's start and ahead of the hunt (the hunt
+        reads as a run to the cooling engine while it lasts) - the re-hunt
+        on the lid close, and gfhome finishing the homing after $H. With
+        lid_late the hunt is requested before the lid opens: the race the
+        test must call."""
         self.grbl = helpers.FakeGrbl().start()
         os.makedirs(self.sysfs + "pic", exist_ok=True)
         self._attr("pic/lid_led", "236")
@@ -575,22 +584,35 @@ class CloudSuiteTests(unittest.TestCase):
             hunt_part = hunt_lines(hunt_part)
         fc = self.fc
 
+        def hunt():
+            self.append(hunt_part, delay=0.0)
+            time.sleep(4.0)          # the hunt outlasts the session wait on the bench
+            fc.state["cool"] = {"phase": "idle", "armed": False, "hold": False}
+
         def on_post(path, form):
             if path == "/mode" and form.get("controller") == "cloud":
                 fc.state["cool"] = dict(self.HUNT_RUN_SAMPLE)
 
                 def land():
                     self.append(pre, delay=0.0)
+                    if lid_late:
+                        return
+                    t0 = time.time()
+                    while fc.state["status"]["switches"]["lid"] and time.time() - t0 < 5:
+                        time.sleep(0.02)
                     time.sleep(0.3)
-                    self.append(hunt_part, delay=0.0)
+                    hunt()
-                    time.sleep(4.0)          # the hunt outlasts the session wait on the bench
-                    fc.state["cool"] = {"phase": "idle", "armed": False, "hold": False}
                 threading.Thread(target=land, daemon=True).start()
             elif path == "/mode" and form.get("controller") == "grbl":
                 self.grbl.state = "Idle"
             return None
         self.fc.on_post = on_post
 
+        def lid_opened():
+            if lid_late:
+                self.append(hunt_part, delay=0.0)
+            self.lid(False)
+
         def lid_closed():
             self.lid(True)
             self.append(close_part, delay=0.2)
@@ -605,7 +627,7 @@ class CloudSuiteTests(unittest.TestCase):
                     f.write(b"2026-08-17T09:46:00.000000+00:00 gfhome[2300] INFO homing complete "
                             b"(service quiet 8s, 3 motion windows)\n")
         self.home_hook = homing
-        return {"Open the lid.": lambda: self.lid(False), "Close the lid.": lid_closed}
+        return {"Open the lid.": lid_opened, "Close the lid.": lid_closed}
 
     def wait_home_command(self):
         while "$H" not in self.grbl.sent:
@@ -633,6 +655,29 @@ class CloudSuiteTests(unittest.TestCase):
         self.assertEqual(self.script.asked, [])
         self.assertTrue(any("PASS:" in l for l in run.lines), run.lines[-5:])
 
+    def test_mode_switch_opens_the_lid_behind_the_controller_and_ahead_of_the_hunt(self):
+        # No controller starts with the enclosure open: the switch is made
+        # lid closed, the lid opens once the controller is up, and the
+        # hunt's request lands after that - the order the test records.
+        hooks = self.mode_switch_setup()
+        threading.Thread(target=self.wait_home_command, daemon=True).start()
+        run = self.run_test(cloud.mode_switch, hooks=hooks, test_id="cloud.mode-switch")
+        self.assertFalse(run.evidence["hunt_before_lid_open"])
+        acts = [(a["channel"], a["state"]) for a in run.evidence["actions"]]
+        self.assertEqual(acts, [("lid", "open"), ("lid", "close")])
+        i_post = next(i for i, l in enumerate(run.lines) if "POST /mode controller=cloud" in l)
+        i_open = next(i for i, l in enumerate(run.lines) if "ACT lid open" in l)
+        self.assertLess(i_post, i_open)
+
+    def test_mode_switch_refuses_to_start_with_the_lid_open(self):
+        hooks = self.mode_switch_setup()
+        self.lid(False)
+        self.assertFails(cloud.mode_switch, "close the lid first", hooks=hooks)
+
+    def test_mode_switch_fails_when_the_hunt_was_requested_before_the_lid_opened(self):
+        hooks = self.mode_switch_setup(lid_late=True)
+        self.assertFails(cloud.mode_switch, "before the lid was open", hooks=hooks)
+
     def test_mode_switch_fails_when_the_hunt_is_refused_for_the_lid(self):
         def refused(hunt_part):
             i = next(i for i, l in enumerate(hunt_part) if "z_axis:home starting z homing cycle" in l)
@@ -914,22 +959,63 @@ class CloudSuiteTests(unittest.TestCase):
         self.assertEqual(self.fc.posts, [])
         self.assertTrue(any("PASS: lid open at the button prompt" in l for l in run.lines))
 
-    # -- the cooling verdict: the armed print waits on the warm-up ------------
+    # -- the cooling verdict: locked until the run, a hold that never clears --
-    def test_verdict_hold_on_the_bench_excerpt(self):
+    def dark_parts(self):
-        self.in_offline()
+        """(the print prologue through the button prompt, the run and the
-        self.fc.state["status"]["coolant"] = {"up_c": 21.5, "down_c": 21.4}
+        print's end with no pause in it)."""
-        self.fc.state["settings"].update({"cool_temp_min": "5", "cool_temp_start": "16"})
-        self.fc.state["cool"].update({"verdict": "OK", "hold": False, "fire_ok": True, "armed": False})
         lines = fixture("pause")
         pre, rest = cut(lines, "waiting for button")
         pre = pre + [rest[0]]
-        # the run and the print's end, without the pause in the middle
         _, run = cut(rest, "machine:_run_loop starting run")
         run = [l for l in run if "paus" not in l and "resum" not in l]
-        stamp = "2026-08-17T09:44:14.%06d+00:00 gfcloud[1927] INFO machine:_verdict_wait "
+        return pre, run
-        wait = [stamp % 100000 + "waiting on the cooling engine: WARMUP (WARM-UP: coolant 21.5 C under "
+
-                "the 22.5 C start gate - heater on, hold)"]
+    def test_dark_print_on_the_bench_excerpt(self):
-        release = [stamp % 200000 + "cooling verdict clean after WARMUP; starting the run"]
+        self.in_offline()
+        self.fc.state["cool"].update({"verdict": "OK", "hold": False, "fire_ok": True, "armed": False})
+        pre, run = self.dark_parts()
+        self.offline_print_hooks(pre)
+
+        def press():
+            # the run: the client unlocks the latch right before it, and
+            # relocks when the job ends
+            self._attr("cnc/interlock_circuit", "37")
+            self.append(run[:1], delay=0.05)
+
+            def ended():
+                self._attr("cnc/interlock_circuit", "45")
+                self.append(run[1:], delay=0.0)
+            threading.Timer(2.0, ended).start()
+        hooks = {"press it. The print runs dark": press}
+        run_ = self.run_test(cloud.dark_print, hooks=hooks, test_id="cloud.dark-print")
+        ev = run_.evidence
+        self.assertTrue(ev["latch_locked_at_button"])
+        self.assertFalse(ev["latch_locked_in_run"])
+        self.assertTrue(ev["latch_locked_after"])
+        self.assertIn(":completed", ev["print finished"])
+        self.assertTrue(any("PASS: locked at the button" in l for l in run_.lines))
+
+    def test_dark_print_fails_when_the_latch_is_open_at_the_button(self):
+        self.in_offline()
+        pre, run = self.dark_parts()
+        self._attr("cnc/interlock_circuit", "37")          # unlocked before the press
+        self.offline_print_hooks(pre)
+        hooks = {"press it. The print runs dark": lambda: self.append(run, delay=0.05)}
+        self.assertFails(cloud.dark_print, "the latch is unlocked at the button wait", hooks=hooks)
+
+    def test_verdict_refuse_on_the_bench_excerpt(self):
+        self.in_offline()
+        self.fc.state["status"]["coolant"] = {"up_c": 21.5, "down_c": 21.4}
+        self.fc.state["settings"].update({"cool_temp_min": "5", "cool_temp_start": "16",
+                                          "cloud_hold_max_s": ""})
+        self.fc.state["cool"].update({"verdict": "OK", "hold": False, "fire_ok": True, "armed": False})
+        pre, run = self.dark_parts()
+        stamp = "2026-08-17T09:44:14.%06d+00:00 gfcloud[1927] %s machine:_verdict_wait "
+        wait = [stamp % (100000, "INFO") + "waiting on the cooling engine: WARMUP (WARM-UP: coolant "
+                "21.5 C under the 29.5 C start gate - heater on, hold)"]
+        refuse = [stamp % (200000, "WARNING") + "cooling hold held 60 s - relocking the laser",
+                  "2026-08-17T09:44:15.000000+00:00 gfcloud[1927] INFO basemachine:_finish_action print "
+                  "[9006]: finished with event \":cancelled\""]
 
         def on_post(path, form):
             if path == "/settings" and form.get("cool_temp_start") not in (None, "0", "16"):
@@ -942,37 +1028,44 @@ class CloudSuiteTests(unittest.TestCase):
         def press():
             self.append(wait, delay=0.05)
 
-            def released():
+            def refused():
                 self.fc.state["cool"].update({"verdict": "OK", "hold": False, "fire_ok": True,
-                                              "armed": False, "phase": "run"})
+                                              "armed": False, "phase": "idle"})
-                self.append(release + run, delay=0.0)
+                self.append(refuse, delay=0.0)
-            threading.Timer(3.0, released).start()
+            threading.Timer(2.5, refused).start()
-        hooks = {"press it. The print then waits": press}
+        hooks = {"press it. Nothing runs": press}
-        run_ = self.run_test(cloud.verdict_hold, hooks=hooks, test_id="cloud.verdict-hold")
+        run_ = self.run_test(cloud.verdict_refuse, hooks=hooks, test_id="cloud.verdict-refuse")
         ev = run_.evidence
-        self.assertEqual(ev["gate"], 22.5)
+        self.assertEqual(ev["gate"], 29.5)
-        self.assertEqual(ev["warmup"]["verdict"], "WARMUP")
+        self.assertTrue(ev["latch_locked_at_button"])
-        self.assertTrue(ev["log"]["cooling verdict clean after WARMUP; starting the run"])
+        self.assertEqual(ev["latch_samples"]["unlocked"], 0)
-        self.assertIn(":completed", ev["print finished"])
+        self.assertGreaterEqual(ev["latch_samples"]["n"], 1)
-        posted = [f for p, f in self.fc.posts if p == "/settings"]
+        self.assertIn(":cancelled", ev["print finished"])
-        self.assertEqual(posted[0]["cool_temp_start"], "22.5")
+        posted = [f for p_, f in self.fc.posts if p_ == "/settings"]
-        self.assertEqual(posted[-1], {"cool_temp_min": "5", "cool_temp_start": "16"})
+        self.assertEqual(posted[0]["cool_temp_start"], "29.5")
-        self.assertTrue(any("PASS: the armed print waited" in l for l in run_.lines))
+        self.assertEqual(posted[0]["cloud_hold_max_s"], "60")
+        self.assertEqual(posted[-1], {"cool_temp_min": "5", "cool_temp_start": "16", "cloud_hold_max_s": ""})
+        self.assertTrue(any("PASS: held" in l for l in run_.lines))
 
-    def test_verdict_hold_fails_when_the_print_runs_under_the_hold(self):
+    def test_verdict_refuse_fails_when_the_latch_unlocks_during_the_hold(self):
         self.in_offline()
         self.fc.state["status"]["coolant"] = {"up_c": 21.5, "down_c": 21.4}
         self.fc.state["settings"].update({"cool_temp_min": "5", "cool_temp_start": "16"})
         self.fc.state["cool"].update({"verdict": "WARMUP", "hold": True, "fire_ok": False, "armed": True})
-        lines = fixture("pause")
+        pre, run = self.dark_parts()
-        pre, rest = cut(lines, "waiting for button")
+        stamp = "2026-08-17T09:44:14.%06d+00:00 gfcloud[1927] %s machine:_verdict_wait "
-        pre = pre + [rest[0]]
+        wait = [stamp % (100000, "INFO") + "waiting on the cooling engine: WARMUP (no reason given)"]
-        _, run = cut(rest, "machine:_run_loop starting run")
+        refuse = [stamp % (200000, "WARNING") + "cooling hold held 60 s - relocking the laser",
-        stamp = "2026-08-17T09:44:14.%06d+00:00 gfcloud[1927] INFO machine:_verdict_wait "
+                  "2026-08-17T09:44:15.000000+00:00 gfcloud[1927] INFO basemachine:_finish_action print "
-        wait = [stamp % 100000 + "waiting on the cooling engine: WARMUP (no reason given)"]
+                  "[9006]: finished with event \":cancelled\""]
         self.offline_print_hooks(pre)
-        hooks = {"press it. The print then waits": lambda: self.append(wait + run[:1], delay=0.05)}
+
-        self.assertFails(cloud.verdict_hold, "the run started under the warm-up hold", hooks=hooks)
+        def press():
+            self.append(wait, delay=0.05)
+            self._attr("cnc/interlock_circuit", "37")      # unlocked under the hold
+            threading.Timer(2.5, lambda: self.append(refuse, delay=0.0)).start()
+        hooks = {"press it. Nothing runs": press}
+        self.assertFails(cloud.verdict_refuse, "the latch unlocked during the hold", hooks=hooks)
 
     # -- a paused print canceled by the lid, a running one by the app --------
     def cancel_parts(self):

forgetest/tests/test_cooling_order.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """cooling.aa-offset-calibrate is registered before the heater tools, so
 a queue runs it first: a heater trial leaves a warm slug circulating past
 the coolant sensors for minutes, and the tool's edges read it as

forgetest/tests/test_cooling_suite.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """cooling.fans-quiet-after-motion and cooling.gate-off replayed host-side
 under the real runner Context against a scripted machine: a fake
 forgectrl (/status fans, /cool/status phase and verdict, /settings with
@@ -729,3 +734,51 @@ class FanGateTests(unittest.TestCase):
             self.run_test()
         self.assertIn("lacks exhaust", str(cm.exception))
         self.assertEqual(self.fc.state["settings"]["cool_tach_exhaust_min_rpm"], "")
+
+
+class FlowVerdictLogTests(unittest.TestCase):
+    """cooling.flow-under-load finds the engine's verdict in what the log
+    gained since the job began, not in a count over a tail of fixed length:
+    there a new verdict line comes in at the bottom as an old one leaves at
+    the top, the count does not move, and a check that verified reads as
+    one that never judged."""
+
+    VERDICT = ("2026-09-19T21:37:46.869674+00:00 forgectrl[2796] INFO cool: coolant flow verified "
+               "(heater rise 11.5 C, dT 9.5 C; laser 1.6 off 13.1)\n")
+    OLD = ("2026-09-19T21:17:27.200840+00:00 forgectrl[965] INFO cool: coolant flow verified "
+           "(heater rise 9.5 C, dT 8.7 C)\n")
+
+    def setUp(self):
+        self.dir = tempfile.mkdtemp(prefix="flowlog.")
+        self.addCleanup(shutil.rmtree, self.dir, ignore_errors=True)
+        self.path = os.path.join(self.dir, "forgectrl.log")
+
+    def write(self, text, mode="w"):
+        with open(self.path, mode, newline="\n") as f:
+            f.write(text)
+
+    def test_only_the_text_after_the_offset_comes_back(self):
+        self.write(self.OLD + "filler\n" * 400)
+        off = os.path.getsize(self.path)
+        self.assertEqual(cooling._log_since(self.path, off), "")
+        self.write(self.VERDICT, mode="a")
+        text = cooling._log_since(self.path, off)
+        self.assertEqual(text, self.VERDICT)
+        m = cooling._load_verdict_rx().search(text)
+        self.assertEqual(m.group(1), "coolant flow verified")
+        self.assertEqual((m.group(2), m.group(5)), ("11.5", "1.6"))
+
+    def test_an_old_verdict_before_the_offset_is_not_the_new_one(self):
+        self.write(self.OLD)
+        off = os.path.getsize(self.path)
+        self.write("2026-09-19T21:36:40+00:00 forgectrl[2796] INFO cool: crash watch armed\n", mode="a")
+        self.assertIsNone(cooling._load_verdict_rx().search(cooling._log_since(self.path, off)))
+
+    def test_a_log_rotated_under_the_test_is_read_whole(self):
+        self.write(self.OLD + "filler\n" * 400)
+        off = os.path.getsize(self.path)
+        self.write(self.VERDICT)                 # the rotation: a new, shorter file
+        self.assertEqual(cooling._log_since(self.path, off), self.VERDICT)
+
+    def test_a_missing_log_reads_as_nothing(self):
+        self.assertEqual(cooling._log_since(os.path.join(self.dir, "none.log"), 0), "")

forgetest/tests/test_fixture.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The bench actuator as the tool sees it.
 
 The fixture is a box on the network that opens the lid loop, pulls the

forgetest/tests/test_image.py

@@ -1,5 +1,11 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 import unittest
 
+from forgetest import catalog
 from forgetest.suite import image
 
 
@@ -20,5 +26,61 @@ class KernelIdentTests(unittest.TestCase):
         self.assertFalse(image.kernel_matches(rel, ["6.12.19-fslc-fslc"]))
 
 
+class NetworkBootTests(unittest.TestCase):
+    STANZA = ("auto wlan0\n"
+              "iface wlan0 inet dhcp\n"
+              "\twpa-driver nl80211\n"
+              "\tudhcpc_opts -x hostname:$(hostname)\n")
+
+    def test_the_test_is_registered_and_covers_nothing_by_design(self):
+        t = catalog.load_suite()["image.network-boot"]
+        self.assertEqual(t.kind, "auto")
+        self.assertEqual(t.covers, ())           # the interfaces file is layer content
+
+    def test_ifstate_names_the_interfaces_ifup_finished(self):
+        self.assertEqual(image.ifstate_names("lo=lo\nwlan0=wlan0\n"), {"lo", "wlan0"})
+        self.assertEqual(image.ifstate_names("lo=lo\n"), {"lo"})
+        self.assertEqual(image.ifstate_names(""), set())
+        self.assertEqual(image.ifstate_names(None), set())
+
+    def test_an_interfaces_file_without_a_dhcpv6_client_is_clean(self):
+        self.assertEqual(image.dhcp6_in_interfaces(self.STANZA), [])
+        self.assertEqual(image.dhcp6_in_interfaces(None), [])
+
+    def test_a_command_that_starts_a_dhcpv6_client_is_named(self):
+        text = self.STANZA + ("iface wlan0 inet6 manual\n"
+                              "\tup udhcpc6 -i wlan0 -b -S -p /run/udhcpc6.wlan0.pid\n")
+        self.assertEqual(image.dhcp6_in_interfaces(text),
+                         ["up udhcpc6 -i wlan0 -b -S -p /run/udhcpc6.wlan0.pid"])
+        detached = "\tup start-stop-daemon -S -b -x /usr/bin/udhcpc6 -- -f -i wlan0\n"
+        self.assertEqual(len(image.dhcp6_in_interfaces(self.STANZA + detached)), 1)
+
+    def test_an_inet6_method_that_runs_a_client_is_named(self):
+        self.assertEqual(image.dhcp6_in_interfaces("iface wlan0 inet6 dhcp\n"),
+                         ["iface wlan0 inet6 dhcp"])
+        self.assertEqual(image.dhcp6_in_interfaces("iface wlan0 inet6 static\n"), [])
+        self.assertEqual(image.dhcp6_in_interfaces("iface wlan0 inet dhcp\n"), [])
+
+    def test_a_comment_starts_nothing(self):
+        text = self.STANZA + "# No DHCPv6 client runs; udhcpc6 is not on the image.\n"
+        self.assertEqual(image.dhcp6_in_interfaces(text), [])
+
+    def test_parse_stat_reads_the_parent_past_an_awkward_comm(self):
+        self.assertEqual(image.parse_stat("371 (udhcpc) S 1 371 371 0 -1 4194624"),
+                         (371, "udhcpc", 1))
+        self.assertEqual(image.parse_stat("9 (a (b) c) S 7 9 9 0"), (9, "a (b) c", 7))
+        self.assertIsNone(image.parse_stat(""))
+        self.assertIsNone(image.parse_stat("12 (x) S"))
+
+    def test_link_addrs_sorts_one_interface_by_scope(self):
+        text = ("fe800000000000002e6b7dfffe0db00a 02 40 20 80    wlan0\n"
+                "26001700000000000000000000001234 02 80 00 00    wlan0\n"
+                "00000000000000000000000000000001 01 80 10 80       lo\n")
+        local, world = image.link_addrs(text, "wlan0")
+        self.assertEqual(local, ["fe800000000000002e6b7dfffe0db00a"])
+        self.assertEqual(world, ["26001700000000000000000000001234"])
+        self.assertEqual(image.link_addrs(text, "eth0"), ([], []))
+
+
 if __name__ == "__main__":
     unittest.main()

forgetest/tests/test_installer.py

@@ -0,0 +1,194 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
+"""scripts/install-forgefirm.sh - the download that retries, and the log.
+
+The installer runs once per machine, on factory firmware, over whatever
+network the owner has. These tests run its own functions under sh with a
+scripted curl in front of them: a transfer that fails resumes and is
+tried again, the failures that waiting cannot fix end the tries at once,
+and every step leaves a line in the install log in the log tree's own
+format."""
+import os
+import re
+import shutil
+import stat
+import subprocess
+import tempfile
+import unittest
+
+import helpers  # noqa: F401  (sys.path)
+
+REPO = os.path.dirname(os.path.dirname(os.path.dirname(os.path.abspath(__file__))))
+SCRIPT = os.path.join(REPO, "scripts", "install-forgefirm.sh")
+MARK = "# The install log, before anything can fail."
+
+# The log tree's line format (forgetest/suite/logs.py keeps the same one).
+LINE_RE = re.compile(r"^\d{4}-\d\d-\d\dT\d\d:\d\d:\d\d(\.\d+)?[+-]\d\d:\d\d install\[\d+\] "
+                     r"(EMERG|ALERT|CRIT|ERR|WARNING|NOTICE|INFO|DEBUG) .+$")
+
+# A curl that plays a script: each call takes the next "rc http bytes"
+# line of $CURL_PLAN, appends that many bytes to the --output file the way
+# a resumed transfer does, prints the HTTP code as -w '%{http_code}'
+# would, records its arguments, and exits rc.
+FAKE_CURL = r"""#!/bin/sh
+echo "$*" >> "$CURL_CALLS"
+OUT=""
+while [ $# -gt 0 ]; do
+  [ "$1" = "--output" ] && OUT="$2"
+  shift
+done
+LINE=$(sed -n 1p "$CURL_PLAN")
+sed -i 1d "$CURL_PLAN"
+set -- $LINE
+[ "${3:-0}" -gt 0 ] && dd if=/dev/zero bs=1 count="$3" 2>/dev/null | tr '\0' 'x' >> "$OUT"
+printf '%s' "$2"
+exit "$1"
+"""
+
+
+def functions():
+    """The installer up to its first action: constants and functions."""
+    with open(SCRIPT, encoding="utf-8") as f:
+        text = f.read()
+    head, mark, _ = text.partition(MARK)
+    assert mark, "the installer lost the line the tests cut it at"
+    return head
+
+
+@unittest.skipUnless(shutil.which("sh") and os.name == "posix", "needs a POSIX sh")
+class InstallerTests(unittest.TestCase):
+    def setUp(self):
+        self.tmp = tempfile.mkdtemp(prefix="ffinstall-test.")
+        self.addCleanup(shutil.rmtree, self.tmp, ignore_errors=True)
+        self.bin = os.path.join(self.tmp, "bin")
+        os.mkdir(self.bin)
+        for name, body in (("curl", FAKE_CURL), ("nslookup", "#!/bin/sh\nexit 1\n"),
+                           ("ip", "#!/bin/sh\nexit 0\n"), ("sleep", "#!/bin/sh\nexit 0\n")):
+            path = os.path.join(self.bin, name)
+            with open(path, "w", newline="\n") as f:
+                f.write(body)
+            os.chmod(path, os.stat(path).st_mode | stat.S_IXUSR)
+        self.fw = os.path.join(self.tmp, "forgefirm.fw")
+        self.log = os.path.join(self.tmp, "log", "install.log")
+        self.calls = os.path.join(self.tmp, "curl.calls")
+        self.plan = os.path.join(self.tmp, "curl.plan")
+
+    def run_sh(self, body, plan=()):
+        with open(self.plan, "w", newline="\n") as f:
+            f.write("".join("%s\n" % line for line in plan))
+        open(self.calls, "w").close()
+        script = "%s\nFW_FILE='%s'\nLOG_DIR='%s'\nLOG_FILE='%s'\nmkdir -p \"$LOG_DIR\"\nLOG_OK=yes\n%s\n" % (
+            functions(), self.fw, os.path.dirname(self.log), self.log, body)
+        env = dict(os.environ, PATH=self.bin + os.pathsep + os.environ["PATH"],
+                   CURL_PLAN=self.plan, CURL_CALLS=self.calls)
+        return subprocess.run(["sh", "-c", script], env=env, capture_output=True, text=True, timeout=60)
+
+    def download(self, plan):
+        r = self.run_sh('download_fw; echo "rc=$? why=$DL_WHY"', plan)
+        with open(self.calls) as f:
+            calls = f.read().splitlines()
+        return r.stdout, calls, self.log_lines()
+
+    def log_lines(self):
+        try:
+            with open(self.log) as f:
+                return f.read().splitlines()
+        except OSError:
+            return []
+
+    def test_a_clean_download_takes_one_try_and_its_name(self):
+        out, calls, log = self.download(["0 200 5000"])
+        self.assertIn("rc=0", out)
+        self.assertEqual(len(calls), 1)
+        self.assertEqual(os.path.getsize(self.fw), 5000)
+        self.assertFalse(os.path.exists(self.fw + ".part"))
+        self.assertTrue(any("complete on try 1, 5000 bytes" in line for line in log), log)
+
+    def test_a_failed_transfer_resumes_and_is_tried_again(self):
+        out, calls, log = self.download(["6 000 0", "56 200 3000", "0 206 2000"])
+        self.assertIn("rc=0", out)
+        self.assertEqual(len(calls), 3)
+        for c in calls:                         # every try resumes, bounded in time
+            self.assertIn("-C -", c)
+            self.assertIn("--connect-timeout", c)
+            self.assertIn("--speed-time", c)
+        self.assertEqual(os.path.getsize(self.fw), 5000)     # 3000 kept, 2000 resumed
+        warns = [line for line in log if " WARNING download: try " in line]
+        self.assertEqual(len(warns), 2, log)
+        self.assertIn("did not resolve", warns[0])
+        self.assertIn("dropped mid-transfer (3000 bytes so far)", warns[1])
+        self.assertIn("Trying again in 5s (try 2 of 5)", out)
+        self.assertIn("Trying again in 15s (try 3 of 5)", out)
+
+    def test_the_tries_run_out(self):
+        out, calls, log = self.download(["28 000 0"] * 5)
+        self.assertIn("rc=1", out)
+        self.assertIn("timed out or stalled", out)
+        self.assertEqual(len(calls), 5)
+        self.assertFalse(os.path.exists(self.fw))
+        self.assertFalse(os.path.exists(self.fw + ".part"))
+        # each failed try leaves what the network looked like
+        self.assertEqual(sum("github.com does not resolve" in line for line in log), 5, log)
+
+    def test_a_missing_release_and_a_full_disk_end_the_tries_at_once(self):
+        out, calls, _ = self.download(["22 404 0"])
+        self.assertIn("rc=1", out)
+        self.assertIn("HTTP 404", out)
+        self.assertEqual(len(calls), 1)
+        out, calls, _ = self.download(["23 200 100"])
+        self.assertIn("rc=1", out)
+        self.assertIn("could not be written", out)
+        self.assertEqual(len(calls), 1)
+
+    def test_a_partial_file_the_server_will_not_resume_starts_over(self):
+        out, calls, _ = self.download(["56 200 4000", "22 416 0", "0 200 5000"])
+        self.assertIn("rc=0", out)
+        self.assertEqual(len(calls), 3)
+        self.assertEqual(os.path.getsize(self.fw), 5000)     # not 9000: the stale part went
+
+    def test_a_tls_failure_names_the_clock(self):
+        out, _, _ = self.download(["60 000 0"] * 5)
+        self.assertRegex(out, r"TLS handshake failed \(a wrong clock does this: \d{4}-\d\d-\d\d")
+
+    def test_every_log_line_is_in_the_tree_format(self):
+        self.download(["7 000 0", "0 200 10"])
+        self.run_sh('log NOTICE "operator declined to continue; no changes made"')
+        lines = self.log_lines()
+        self.assertGreater(len(lines), 5)
+        for line in lines:
+            self.assertRegex(line, LINE_RE)
+
+    def test_die_leaves_the_reason_in_the_log(self):
+        r = self.run_sh('die "archiving slot 1 failed"; echo not-reached')
+        self.assertEqual(r.returncode, 1)
+        self.assertNotIn("not-reached", r.stdout)
+        self.assertTrue(any(" ERR install failed: archiving slot 1 failed" in line
+                            for line in self.log_lines()))
+
+    def test_no_writable_log_never_fails_the_install(self):
+        r = self.run_sh('LOG_OK=""; log INFO "x"; LOG_OK=yes; LOG_FILE=/nonexistent/dir/x.log; '
+                        'log INFO "y"; echo "still-running rc=$?"')
+        self.assertIn("still-running rc=0", r.stdout)
+
+
+class InstallerShapeTests(unittest.TestCase):
+    """What holds on any host, with no shell to run."""
+
+    def test_the_log_lives_in_the_tree_the_export_carries(self):
+        head = functions()
+        self.assertIn('LOG_DIR="/data/log/forgefirm/install"', head)
+        self.assertIn('LOG_FILE="$LOG_DIR/install.log"', head)
+
+    def test_the_download_is_the_retrying_one(self):
+        with open(SCRIPT, encoding="utf-8") as f:
+            text = f.read()
+        body = text.partition(MARK)[2]
+        self.assertIn("download_fw", body)
+        self.assertNotRegex(body, r"(?m)^\s*curl ")       # no bare curl past the functions
+
+
+if __name__ == "__main__":
+    unittest.main()

forgetest/tests/test_kernel_suite.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """wait_hv_off against a scripted charge-pump readback: a chain that
 releases inside the window passes, a chain held past it is the refusal,
 and a chain already off costs no wait."""

forgetest/tests/test_laser_dwell.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The dwell-gap verdict of laser.emission-witness over synthetic trails:
 the button latch judged from the first emission through every sample
 whose readback word shows the laser latch unlocked, both bits from that

forgetest/tests/test_manifest.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 import os
 import unittest
 

forgetest/tests/test_mode.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The controller mode a test declares: the runner puts the machine there
 before the test and the baseline keeps it there afterward.
 

forgetest/tests/test_operator.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The operator channel: notices, `ready`, `act`, and the precheck.
 
 A test asks for the operator's part in a way the page can show before

forgetest/tests/test_page.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The page assembly: the ui/ files inlined in order, the gzipped install
 (what the dev image carries) assembling to the same bytes as a checkout,
 the token placeholder carried exactly once, and a missing marker refused

forgetest/tests/test_queue.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The two queues: what they select, the order they run in, and where
 they stop.
 

forgetest/tests/test_redact.py

@@ -0,0 +1,64 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
+"""The release artifact carries no machine identity (redact.py).
+
+The artifact is committed to a public repository. These hold the exporter
+to that, and to not redacting what the gate recomputes.
+"""
+import json
+import unittest
+
+from forgetest.redact import scrub
+
+
+class RedactTests(unittest.TestCase):
+
+    def test_keyed_identity_is_replaced(self):
+        out = scrub({"gf_serial": "15232020", "machine_id": "JTY-876",
+                     "hostname": "forgefirm-b00a"})
+        self.assertNotIn("15232020", json.dumps(out))
+        self.assertNotIn("JTY-876", json.dumps(out))
+        self.assertNotIn("forgefirm-b00a", json.dumps(out))
+
+    def test_a_known_value_is_replaced_in_free_text_too(self):
+        # A hostname in a log line is the same leak as one in its own field.
+        out = scrub({"evidence": {"hostname": "forgefirm-b00a"},
+                     "log": ["set hostname 'forgefirm-b00a' ok"]})
+        self.assertNotIn("forgefirm-b00a", json.dumps(out))
+
+    def test_addresses_and_macs_go(self):
+        out = scrub(["ping 172.16.1.97", "wlan0 2C:6B:7D:0D:B0:0A up"])
+        t = json.dumps(out)
+        self.assertNotIn("172.16.1.97", t)
+        self.assertNotIn("2C:6B:7D:0D:B0:0A", t)
+
+    def test_loopback_is_kept(self):
+        self.assertIn("127.0.0.1", json.dumps(scrub(["curl http://127.0.0.1:8090/"])))
+
+    def test_numbering_is_stable_within_an_export(self):
+        out = scrub(["a 10.0.0.5", "b 10.0.0.6", "c 10.0.0.5"])
+        self.assertEqual(out[0].split()[1], out[2].split()[1])
+        self.assertNotEqual(out[0].split()[1], out[1].split()[1])
+
+    def test_integrity_values_survive(self):
+        # The gate recomputes these; a long hex blob is what they look like.
+        rec = {"fingerprint": "a" * 64, "manifest_sha": "b" * 64,
+               "source_sha": "c" * 64, "sha256": "d" * 64,
+               "catalog_hash": "e" * 64, "identity_sha": "f" * 64}
+        self.assertEqual(scrub(rec), rec)
+
+    def test_a_clock_time_is_not_an_address(self):
+        out = scrub(["2026-09-18T18:50:11Z baseline: pre: clean"])
+        self.assertIn("18:50:11", out[0])
+
+    def test_result_fields_the_gate_reads_are_untouched(self):
+        rec = {"result": "PASS", "ts": "2026-09-18T18:50:11Z",
+               "campaign": "c-1", "fingerprint": "a" * 64}
+        self.assertEqual(scrub(rec), rec)
+
+
+if __name__ == "__main__":
+    unittest.main()

forgetest/tests/test_responsiveness.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """What keeps the page answering the operator instead of the timer.
 
 Two things went wrong on the bench and are pinned here:

forgetest/tests/test_server.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """Runner + HTTP API end to end on localhost with a fake catalog and a
 fake bench tool. No hardware, no forgectrl."""
 import json

forgetest/tests/test_setup_dark.py

@@ -1,8 +1,13 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The setup's checks in the catalog: registered as automatic tests with
 no precheck, the takeover ones marked so, every covers map naming the
 check runner; and the check driver itself against the fake daemon: a
-start, a prompt answered, the result taken, the record read at version
+start, the run polled to its end with no question asked, the result
-1, and the settings a check may write put back as found."""
+taken, the record read at version 1, and the settings read as before."""
 import os
 import sys
 import unittest
@@ -12,8 +17,8 @@ import helpers  # noqa: E402
 from forgetest import catalog  # noqa: E402
 from forgetest.runner import Context, Run  # noqa: E402
 
-IDS = ["commission.check-switches", "commission.check-sensors", "commission.check-airflow",
+IDS = ["setup.check-switches", "setup.check-sensors", "setup.check-airflow",
-       "commission.check-cameras", "commission.check-motion", "commission.check-flow-verify"]
+       "setup.check-cameras", "setup.check-motion", "setup.check-flow-verify"]
 
 
 class RegistrationTests(unittest.TestCase):
@@ -25,11 +30,11 @@ class RegistrationTests(unittest.TestCase):
         # bench fixture performs; the rest need no hands at all.
         for tid in IDS:
             self.assertIn(tid, self.reg)
-        for tid in ("commission.check-switches", "commission.check-cameras"):
+        for tid in ("setup.check-switches", "setup.check-cameras"):
             self.assertEqual(self.reg[tid].kind, "operator", tid)
             self.assertTrue(self.reg[tid].fixture_runnable(("button", "lid", "interlock")), tid)
-        for tid in ("commission.check-sensors", "commission.check-airflow", "commission.check-motion",
+        for tid in ("setup.check-sensors", "setup.check-airflow", "setup.check-motion",
-                    "commission.check-flow-verify"):
+                    "setup.check-flow-verify"):
             self.assertEqual(self.reg[tid].kind, "auto", tid)
 
     def test_no_check_asks_the_operator_to_prepare_anything(self):
@@ -37,7 +42,7 @@ class RegistrationTests(unittest.TestCase):
             self.assertIsNone(getattr(self.reg[tid], "precheck", None), tid)
 
     def test_the_checks_that_take_the_machine_say_so(self):
-        for tid in ("commission.check-airflow", "commission.check-motion", "commission.check-flow-verify"):
+        for tid in ("setup.check-airflow", "setup.check-motion", "setup.check-flow-verify"):
             self.assertEqual(self.reg[tid].hardware, "takeover", tid)
 
     def test_every_check_covers_the_runner_and_the_page(self):
@@ -62,9 +67,17 @@ class SensorsCheckTests(unittest.TestCase):
                      "shots": {"lid": False, "head": False}}
         self.versions = {}
         self.answers = []
+        self.polls = 0
 
         def on_get(path, q):
             if path == "/wiz/dark":
+                # One poll sees the sampling; the next sees the result.
+                if self.dark["running"]:
+                    self.polls += 1
+                    if self.polls >= 2:
+                        self.dark.update({"running": False, "prompt": None, "progress": 100,
+                                          "result": dict(self.RESULT)})
+                        self.versions["sensors"] = 1
                 return 200, dict(self.dark)
             if path == "/wiz":
                 return 200, {"versions": dict(self.versions), "required": [], "completed": True}
@@ -74,19 +87,11 @@ class SensorsCheckTests(unittest.TestCase):
             s = self.fake.state["settings"]
             if path == "/wiz/sensors/start":
                 self.dark.update({"id": "sensors", "running": True, "phase": "sampling",
-                                  "prompt": {"seq": 7, "id": "room-temp", "kind": "number",
+                                  "prompt": None})
-                                             "text": "Optional: the room temperature.",
-                                             "options": ["Set", "Skip"]}})
                 return 200, {"started": True, "id": "sensors"}
             if path == "/wiz/sensors/answer":
                 self.answers.append(dict(form))
-                if form.get("seq") != "7":
                 return 409, {"error": "no such prompt is open"}
-                if form.get("value") == "Skip":
-                    self.dark.update({"running": False, "prompt": None, "progress": 100,
-                                      "result": dict(self.RESULT)})
-                    self.versions["sensors"] = 1
-                return 200, {"ok": True}
             if path == "/settings":
                 for k, v in form.items():
                     if v == "":
@@ -101,15 +106,35 @@ class SensorsCheckTests(unittest.TestCase):
     def tearDown(self):
         self.fake.stop()
 
-    def test_start_prompt_answer_result_and_restore(self):
+    def test_start_no_question_result_and_settings_untouched(self):
-        t = catalog.load_suite()["commission.check-sensors"]
+        t = catalog.load_suite()["setup.check-sensors"]
         run = Run("test", t.id, t.title)
         t.fn(Context(run, None, t))
         self.assertIn(("/wiz/sensors/start", {}), [(p, f) for p, f in self.fake.posts])
-        self.assertEqual(self.answers, [{"seq": "7", "value": "Skip"}])
+        self.assertEqual(self.answers, [])
         self.assertEqual(run.evidence["result"]["laser_pgood"], 1)
-        self.assertEqual(run.evidence["settings_before"], {"cool_temp_offset_c": "0.5"})
+        self.assertEqual(run.evidence["settings_before"].get("cool_temp_offset_c"), "0.5")
         self.assertEqual(self.fake.state["settings"]["cool_temp_offset_c"], "0.5")
+        self.assertNotIn("/settings", [p for p, _ in self.fake.posts])
+
+    def test_a_question_fails_the_check(self):
+        t = catalog.load_suite()["setup.check-sensors"]
+        run = Run("test", t.id, t.title)
+        real_get = self.fake.on_get
+
+        def on_get(path, q):
+            if path == "/wiz/dark" and self.dark["running"]:
+                d = dict(self.dark)
+                d["prompt"] = {"seq": 3, "id": "room-temp", "kind": "number", "text": "?",
+                               "options": ["Set", "Skip"]}
+                return 200, d
+            return real_get(path, q)
+        self.fake.on_get = on_get
+        with self.assertRaises(Exception) as cm:
+            t.fn(Context(run, None, t))
+        self.assertIn("asked a question", str(cm.exception))
+        self.assertEqual(self.answers, [])
+        self.assertIn(("/wiz/sensors/abort", {}), [(p, f) for p, f in self.fake.posts])
 
 
 if __name__ == "__main__":

forgetest/tests/test_setup_sheet.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """The setup's sheet in the catalog: one live test on the button with a
 piece of wood at hand, its covers map naming the live runner, the
 renderer, the sender, the page, and the driver's laser module; and the
@@ -14,10 +19,47 @@ sys.path.insert(0, os.path.dirname(__file__))
 import helpers  # noqa: E402
 from forgetest import catalog  # noqa: E402
 from forgetest.runner import Context, Run  # noqa: E402
-from forgetest.suite import commission_sheet  # noqa: E402
+from forgetest.suite import setup_sheet  # noqa: E402
 
 LIVE = ["sheet.frame", "laser.focus", "laser.floor", "laser.dose-curve", "laser.corner", "cooling.flow-load"]
+# The focus card's program is read again after it ran: the served ladder
+# must then lie in the window the card wrote.
+PREVIEWS = ["sheet.frame", "laser.focus", "laser.focus", "laser.floor", "laser.dose-curve", "laser.corner",
+            "cooling.flow-load"]
 EMISSION = {"hv_max": 610, "laser_on_samples": 900, "thermopile_delta": 600, "lit_s": 30.0}
+SPM = 2.922                     # the lens screw, half-steps per mm ($102)
+EDGE_DEFAULT = 3.35
+
+
+def lens_block(s):
+    """The /status lens block as the daemon builds it from the settings: a
+    stop count from 1 to 40 stands, anything else is the fallback."""
+    def count(key, fallback):
+        try:
+            n = float(s.get(key, ""))
+        except ValueError:
+            return fallback, False
+        return (int(n), True) if 1 <= n <= 40 else (fallback, False)
+    try:
+        edge = float(s.get("lens_hall_edge_z_mm", ""))
+    except ValueError:
+        edge = EDGE_DEFAULT
+    below, a = count("lens_stop_below_steps", 10)
+    above, b = count("lens_stop_above_steps", 12)
+    return {"edge_z": round(edge, 2), "below": below, "above": above, "stops_found": a and b,
+            "reach_min": round(edge - below / SPM, 2), "reach_max": round(edge + above / SPM, 2)}
+
+
+def ladder_z(edge, below, above):
+    """The focus ladder the daemon builds: twelve whole half-steps from
+    the top of the window to the bottom."""
+    return [round(edge + round(above - (above + below) * i / 11) / SPM, 2) for i in range(12)]
+
+
+# The window the focus card finds and writes before its controller starts.
+STOPS = {"lens_stop_below_steps": "14", "lens_stop_above_steps": "20"}
+FOCUS_WINDOW = {"below": 14, "above": 20, "reach_min": round(EDGE_DEFAULT - 14 / SPM, 2),
+                "reach_max": round(EDGE_DEFAULT + 20 / SPM, 2)}
 
 # Each wizard as the daemon runs it: its prompts in order (id, kind,
 # options) and the result it ends with. A "jog" prompt repeats until the
@@ -37,7 +79,9 @@ SCRIPT = {
                      "steps_per_mm": 2.922, "max_height_mm": 13.81,
                      "focus_range_mm": {"min": 2.17, "max": 13.81},
                      "stops": {"found": True, "below": 14, "above": 20, "contact_below": 16,
-                               "contact_above": 22, "why": ""}, "emission": EMISSION}),
+                               "contact_above": 22, "why": ""},
+                     "window": dict(FOCUS_WINDOW), "ladder_z": ladder_z(EDGE_DEFAULT, 14, 20),
+                     "emission": EMISSION}),
     "laser.floor": ([("floor-arm", "continue", ["Continue"]),
                      ("floor-pick", "choice", ["2", "4", "6", "8", "None"])],
                     {"faintest_density": 8.0, "floor_density": 10.0, "emission": EMISSION}),
@@ -50,10 +94,11 @@ SCRIPT = {
                           {"lit_s": 30.0, "dose_raw_s": 12000, "peak_c": 0.72, "k_density": 2.14e-5,
                            "k_cw": 2.78e-5, "emission": EMISSION}),
 }
-# What each card writes when it ends.
+# What a card writes when it starts (the focus card's window, before its
+# controller starts) and when it ends.
+START_WRITES = {"laser.focus": dict(STOPS)}
 WRITES = {
-    "laser.focus": {"lens_hall_edge_z_mm": "6.96", "lens_stop_below_steps": "14",
+    "laser.focus": {"lens_hall_edge_z_mm": "6.96"},
-                    "lens_stop_above_steps": "20"},
     "laser.floor": {"laser_floor_density": "10"},
     "laser.dose-curve": {"laser_dose_curve": "10:0.44,100:100"},
     "laser.corner": {"laser_corner_gamma": "1.5"},
@@ -67,7 +112,7 @@ FOUND = {"lens_hall_edge_z_mm": "3.35", "lens_stop_below_steps": "10", "lens_sto
 
 class RegistrationTests(unittest.TestCase):
     def setUp(self):
-        self.t = catalog.load_suite()["commission.sheet"]
+        self.t = catalog.load_suite()["setup.sheet"]
 
     def test_one_live_test_on_the_button_with_the_sheet_at_hand(self):
         t = self.t
@@ -78,12 +123,12 @@ class RegistrationTests(unittest.TestCase):
         self.assertTrue(t.hands)
         self.assertFalse(t.fixture_runnable(("button", "lid", "interlock")))
         self.assertIsNone(getattr(t, "precheck", None))
-        for want in ("commission.check-motion", "laser.emission-witness", "cooling.flow-verify"):
+        for want in ("setup.check-motion", "laser.emission-witness", "cooling.flow-verify"):
             self.assertIn(want, t.requires)
 
     def test_no_other_sheet_test_remains(self):
-        ids = [i for i in catalog.load_suite() if i.startswith("commission.sheet")]
+        ids = [i for i in catalog.load_suite() if i.startswith("setup.sheet")]
-        self.assertEqual(ids, ["commission.sheet"])
+        self.assertEqual(ids, ["setup.sheet"])
 
     def test_covers_the_live_runner_the_renderer_the_sender_the_page_and_the_driver(self):
         covers = set(self.t.covers)
@@ -97,7 +142,7 @@ class RegistrationTests(unittest.TestCase):
         text = " ".join(self.t.steps).lower()
         self.assertIn("press the machine's button once", text)
         self.assertNotIn("when the page", text)
-        self.assertEqual(len(commission_sheet.CARDS), 6)
+        self.assertEqual(len(setup_sheet.CARDS), 6)
 
 
 class ScriptedDaemon:
@@ -115,9 +160,11 @@ class ScriptedDaemon:
         self.versions = {}
         self.answers = {}          # wid -> [values]
         self.order = []            # the wizards as started
+        self.settings_at_start = {}    # wid -> the settings as the wizard found them
         self.previews = []
         self.queue = []
         self.seq = 0
+        self.stray_z = None        # a Z the served program commands beyond the reach, when set
         fake.on_get = self.on_get
         fake.on_post = self.on_post
 
@@ -130,6 +177,10 @@ class ScriptedDaemon:
         return True
 
     def on_get(self, path, q):
+        s = self.fake.state["settings"]
+        if path == "/status":
+            # the lens block follows the settings, as the daemon's does
+            return 200, dict(self.fake.state["status"], lens=lens_block(s))
         if path == "/wiz/dark":
             return 200, dict(self.dark)
         if path == "/wiz":
@@ -140,8 +191,18 @@ class ScriptedDaemon:
                 return 404, {"error": "no such card"}
             return 200, b"<svg xmlns='http://www.w3.org/2000/svg'></svg>", "image/svg+xml"
         if path == "/wiz/sheet.gcode":
-            # the frame and the text are M4 at the mark dose, as the daemon serves them
+            # the frame and the text are M4 at the mark dose, as the daemon
-            return 200, b"; mock\nM4 S400\nG0 X60 Y42\nG1 X120 Y42 F3000\nM5\n", "text/plain"
+            # serves them; the head's Z is the edge, the tail goes back to
+            # it, and the focus card's ladder spans the window the settings
+            # hold now
+            lens = lens_block(s)
+            lines = ["; mock", "G0 Z%.2f" % lens["edge_z"], "M4 S400", "G0 X60 Y42", "G1 X120 Y42 F3000"]
+            if q.get("card") == "laser.focus":
+                lines += ["G0 Z%.2f" % z for z in ladder_z(lens["edge_z"], lens["below"], lens["above"])]
+            if self.stray_z is not None:
+                lines.append("G0 Z%.2f" % self.stray_z)
+            lines += ["M5", "G0 Z%.2f" % lens["edge_z"], "G0 X0 Y0", "M2"]
+            return 200, ("\n".join(lines) + "\n").encode(), "text/plain"
         return None
 
     def on_post(self, path, form):
@@ -151,6 +212,8 @@ class ScriptedDaemon:
             if wid not in SCRIPT:
                 return 404, {"error": "no such wizard"}
             self.order.append(wid)
+            self.settings_at_start[wid] = dict(s)
+            s.update(START_WRITES.get(wid, {}))
             self.queue = list(SCRIPT[wid][0])
             self.dark.update({"id": wid, "running": True, "phase": "starting", "result": None, "error": ""})
             self.open_next()
@@ -188,7 +251,7 @@ class SheetRunTests(unittest.TestCase):
         self.fake.stop()
 
     def test_the_whole_sheet_on_one_piece(self):
-        t = catalog.load_suite()["commission.sheet"]
+        t = catalog.load_suite()["setup.sheet"]
         run = Run("test", t.id, t.title)
         run.unattended = True           # the ready gate passes; the arm cue is a notice
         t.fn(Context(run, None, t))
@@ -199,7 +262,7 @@ class SheetRunTests(unittest.TestCase):
         self.assertEqual(d.answers["laser.focus"], ["Continue", "11", "Keep"])
         self.assertEqual(d.answers["laser.floor"], ["Continue", "8"])
         self.assertEqual(d.answers["laser.corner"], ["Continue", "1.50"])
-        self.assertEqual(d.previews, LIVE)
+        self.assertEqual(d.previews, PREVIEWS)
         cards = run.evidence["cards"]
         self.assertEqual(sorted(cards), sorted(["sheet.place"] + LIVE))
         for wid in LIVE:
@@ -208,6 +271,24 @@ class SheetRunTests(unittest.TestCase):
         self.assertNotIn("emission", run.evidence)
         self.assertEqual(cards["sheet.place"]["result"]["origin_x"], 100)
         self.assertEqual(run.evidence["settings_before"], FOUND)
+        # A fresh machine's run: the lens settings were gone before the
+        # frame, the frame's program ran in the fallback window, the focus
+        # card's window was in the settings when the floor card started,
+        # and the window check filed what it compared.
+        for k in setup_sheet.LENS_SETTINGS:
+            self.assertNotIn(k, d.settings_at_start["sheet.frame"], k)
+        self.assertEqual(run.evidence["lens_fresh"]["stops_found"], False)
+        self.assertEqual(run.evidence["program_z"]["sheet.frame"]["reach"], [-0.07, 7.46])
+        floor_start = d.settings_at_start["laser.floor"]
+        self.assertEqual({k: floor_start[k] for k in setup_sheet.LENS_SETTINGS},
+                         {"lens_hall_edge_z_mm": "6.96", "lens_stop_below_steps": "14", "lens_stop_above_steps": "20"})
+        fw = run.evidence["focus_window"]
+        self.assertEqual(fw["window"], FOCUS_WINDOW)
+        self.assertEqual(fw["settings"]["lens_stop_below_steps"], "14")
+        self.assertEqual(len(fw["ladder_z"]), 12)
+        self.assertEqual(fw["program_z_before"]["reach"], [-0.07, 7.46])      # the fallback ladder
+        self.assertEqual(fw["program_z_after"]["reach"], [2.17, 13.8])        # the written window at the new edge
+        self.assertEqual(len(fw["program_z_after"]["z"]), 14)                 # head, twelve lines, tail
         for k, v in FOUND.items():
             self.assertEqual(self.fake.state["settings"][k], v, k)      # restored
 
@@ -218,7 +299,7 @@ class SheetRunTests(unittest.TestCase):
         place_prompts, place_result = SCRIPT["sheet.place"]
         SCRIPT["sheet.place"] = (place_prompts, dict(place_result, thickness_mm=3.175))
         try:
-            t = catalog.load_suite()["commission.sheet"]
+            t = catalog.load_suite()["setup.sheet"]
             run = Run("test", t.id, t.title)
             run.unattended = True
             t.fn(Context(run, None, t))
@@ -234,7 +315,7 @@ class SheetRunTests(unittest.TestCase):
         place_prompts, place_result = SCRIPT["sheet.place"]
         SCRIPT["sheet.place"] = (place_prompts, dict(place_result, thickness_mm=0.0))
         try:
-            t = catalog.load_suite()["commission.sheet"]
+            t = catalog.load_suite()["setup.sheet"]
             run = Run("test", t.id, t.title)
             run.unattended = True
             with self.assertRaises(Failed) as cm:
@@ -250,7 +331,7 @@ class SheetRunTests(unittest.TestCase):
         SCRIPT_DARK["emission"] = {"hv_max": 0, "laser_on_samples": 0, "thermopile_delta": 0}
         SCRIPT["laser.floor"] = (SCRIPT["laser.floor"][0], SCRIPT_DARK)
         try:
-            t = catalog.load_suite()["commission.sheet"]
+            t = catalog.load_suite()["setup.sheet"]
             run = Run("test", t.id, t.title)
             run.unattended = True
             with self.assertRaises(Failed):
@@ -261,6 +342,44 @@ class SheetRunTests(unittest.TestCase):
         finally:
             SCRIPT["laser.floor"] = (SCRIPT["laser.floor"][0], dict(SCRIPT_DARK, emission=EMISSION))
 
+    def test_a_focus_window_the_settings_do_not_hold_fails_the_run(self):
+        # The defect the bench found: the focus card burned its ladder over
+        # the stops it found while the controller's Z limit stood on the
+        # settings, which did not hold them. A daemon whose focus result
+        # names a window the settings do not hold fails the run before the
+        # floor card, and the settings still go back.
+        from forgetest.runner import Failed
+        saved = dict(START_WRITES["laser.focus"])
+        START_WRITES["laser.focus"] = {}
+        try:
+            t = catalog.load_suite()["setup.sheet"]
+            run = Run("test", t.id, t.title)
+            run.unattended = True
+            with self.assertRaises(Failed) as cm:
+                t.fn(Context(run, None, t))
+            self.assertIn("the settings hold", str(cm.exception))
+            self.assertEqual(self.daemon.order, ["sheet.place", "sheet.frame", "laser.focus"])
+            for k, v in FOUND.items():
+                self.assertEqual(self.fake.state["settings"][k], v, k)
+        finally:
+            START_WRITES["laser.focus"] = saved
+
+    def test_a_program_z_beyond_the_reach_fails_before_the_burn(self):
+        # A served program that commands a Z the lens does not reach is
+        # refused before the card starts: nothing burns.
+        from forgetest.runner import Failed
+        self.daemon.stray_z = 10.6
+        t = catalog.load_suite()["setup.sheet"]
+        run = Run("test", t.id, t.title)
+        run.unattended = True
+        with self.assertRaises(Failed) as cm:
+            t.fn(Context(run, None, t))
+        self.assertIn("outside the lens window", str(cm.exception))
+        self.assertIn("10.6", str(cm.exception))
+        self.assertEqual(self.daemon.order, ["sheet.place"])
+        for k, v in FOUND.items():
+            self.assertEqual(self.fake.state["settings"][k], v, k)
+
 
 if __name__ == "__main__":
     unittest.main()

forgetest/tests/test_setup_suite.py

@@ -1,4 +1,9 @@
-"""The commission.* suite on the host: the registration (ids, kinds, the
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
+"""The setup.* suite on the host: the registration (ids, kinds, the
 takeover tests, the operator tests' hands), the record builders, the
 machine's name, the cookie parsing, the LED cue, the settle rule for a
 gated supervisor, and the cloud-off surface test driven end to end
@@ -12,15 +17,15 @@ import unittest
 import helpers
 from forgetest import baseline, catalog
 from forgetest.runner import Context, Run
-from forgetest.suite import commission
+from forgetest.suite import setup
 
-IDS = ("commission.gate-blocks-controllers", "commission.override-until-reboot",
+IDS = ("setup.gate-blocks-controllers", "setup.override-until-reboot",
-       "commission.advisories-rehash", "commission.account-login", "commission.https-only-writes",
+       "setup.advisories-rehash", "setup.account-login", "setup.https-only-writes",
-       "commission.ssh-until-reboot", "commission.cloud-disabled-surface",
+       "setup.ssh-until-reboot", "setup.cloud-disabled-surface",
-       "commission.factory-return", "commission.machine-name", "commission.first-run-flow",
+       "setup.factory-return", "setup.machine-name", "setup.first-run-flow",
-       "commission.first-run-page", "commission.what-changed", "commission.record-export",
+       "setup.first-run-page", "setup.what-changed", "setup.record-export",
-       "commission.mirror")
+       "setup.mirror")
-OPERATOR = ("commission.first-run-flow", "commission.first-run-page")
+OPERATOR = ("setup.first-run-flow", "setup.first-run-page")
 
 
 class RegistrationTests(unittest.TestCase):
@@ -35,49 +40,49 @@ class RegistrationTests(unittest.TestCase):
         for tid in IDS:
             if tid not in OPERATOR:
                 self.assertEqual(kinds[tid], "auto", tid)
-        self.assertNotIn("commission.root-ssh-refused", self.reg)     # folded into ssh-until-reboot
+        self.assertNotIn("setup.root-ssh-refused", self.reg)     # folded into ssh-until-reboot
-        self.assertNotIn("commission.wizard-first-run", self.reg)     # split into the flow and the page
+        self.assertNotIn("setup.wizard-first-run", self.reg)     # split into the flow and the page
 
     def test_the_record_swapping_tests_are_takeovers(self):
-        for tid in ("commission.gate-blocks-controllers", "commission.advisories-rehash",
+        for tid in ("setup.gate-blocks-controllers", "setup.advisories-rehash",
-                    "commission.first-run-flow", "commission.first-run-page",
+                    "setup.first-run-flow", "setup.first-run-page",
-                    "commission.what-changed", "commission.mirror"):
+                    "setup.what-changed", "setup.mirror"):
             self.assertEqual(self.reg[tid].hardware, "takeover", tid)
-        self.assertEqual(self.reg["commission.record-export"].hardware, "api")
+        self.assertEqual(self.reg["setup.record-export"].hardware, "api")
 
     def test_the_lifecycle_tests_cover_their_files(self):
-        changed = set(self.reg["commission.what-changed"].covers)
+        changed = set(self.reg["setup.what-changed"].covers)
-        export = set(self.reg["commission.record-export"].covers)
+        export = set(self.reg["setup.record-export"].covers)
-        mirror = set(self.reg["commission.mirror"].covers)
+        mirror = set(self.reg["setup.mirror"].covers)
         self.assertIn(("forgectrl", "src/ui/panel.js"), changed)
         self.assertIn(("forgectrl", "src/recordhtml.*"), export)
         self.assertIn(("forgectrl", "src/logs.*"), export)
         self.assertIn(("forgectrl", "src/wizdark.*"), mirror)
-        self.assertIn("commission.check-sensors", self.reg["commission.mirror"].requires)
+        self.assertIn("setup.check-sensors", self.reg["setup.mirror"].requires)
 
     def test_flag_of_reads_the_status_document(self):
         w = {"required": ["airflow", {"id": "laser.floor", "reason": "the tube was replaced"}],
              "recommended": [{"id": "laser.focus", "reason": "the tray was replaced"}]}
-        self.assertEqual(commission.flag_of(w, "required", "laser.floor"), "the tube was replaced")
+        self.assertEqual(setup.flag_of(w, "required", "laser.floor"), "the tube was replaced")
-        self.assertEqual(commission.flag_of(w, "recommended", "laser.focus"), "the tray was replaced")
+        self.assertEqual(setup.flag_of(w, "recommended", "laser.focus"), "the tray was replaced")
-        self.assertIsNone(commission.flag_of(w, "required", "airflow"))       # a plain id is the table, not a flag
+        self.assertIsNone(setup.flag_of(w, "required", "airflow"))       # a plain id is the table, not a flag
-        self.assertIsNone(commission.flag_of(w, "required", "laser.focus"))
+        self.assertIsNone(setup.flag_of(w, "required", "laser.focus"))
-        self.assertIsNone(commission.flag_of({}, "recommended", "x"))
+        self.assertIsNone(setup.flag_of({}, "recommended", "x"))
 
     def test_the_first_run_flow_runs_unattended_with_the_fixture_and_the_page_walk_does_not(self):
-        flow = self.reg["commission.first-run-flow"]
+        flow = self.reg["setup.first-run-flow"]
         self.assertEqual(list(flow.actions), ["button"])
         self.assertFalse(flow.hands)
         self.assertTrue(flow.fixture_runnable(("button", "lid", "interlock")))
-        page = self.reg["commission.first-run-page"]
+        page = self.reg["setup.first-run-page"]
         self.assertTrue(page.hands)
         self.assertFalse(page.fixture_runnable(("button", "lid", "interlock")))
-        self.assertIn("commission.first-run-flow", page.requires)
+        self.assertIn("setup.first-run-flow", page.requires)
 
     def test_the_first_run_split_keeps_the_backend_and_the_page_apart(self):
-        flow = set(self.reg["commission.first-run-flow"].covers)
+        flow = set(self.reg["setup.first-run-flow"].covers)
-        page = set(self.reg["commission.first-run-page"].covers)
+        page = set(self.reg["setup.first-run-page"].covers)
-        for want in (("forgectrl", "src/wiz.*"), ("forgectrl", "src/commission.*"), ("forgectrl", "src/users.*"),
+        for want in (("forgectrl", "src/wiz.*"), ("forgectrl", "src/setup.*"), ("forgectrl", "src/users.*"),
                      ("forgectrl", "src/button.*"), ("forgectrl", "src/led.*"), ("forgectrl", "src/advisories.*")):
             self.assertIn(want, flow, want)
             self.assertNotIn(want, page, want)
@@ -85,17 +90,17 @@ class RegistrationTests(unittest.TestCase):
             self.assertIn(want, page, want)
 
     def test_the_only_attended_tests_need_a_workstation_or_the_sheet(self):
-        # With the bench actuator up, three commissioning tests keep a
+        # With the bench actuator up, three setup tests keep a
         # person: the page walk, the print from the Glowforge app, and
         # the sheet. Everything else runs from the queue.
-        attended = sorted(tid for tid, t in self.reg.items() if tid.startswith("commission.")
+        attended = sorted(tid for tid, t in self.reg.items() if tid.startswith("setup.")
                           and t.kind != "auto" and not t.fixture_runnable(("button", "lid", "interlock")))
-        self.assertEqual(attended, ["commission.cloud-header-capture", "commission.first-run-page",
+        self.assertEqual(attended, ["setup.cloud-header-capture", "setup.first-run-page",
-                                    "commission.sheet"])
+                                    "setup.sheet"])
 
     def test_the_factory_return_never_runs_the_return(self):
         import inspect
-        t = self.reg["commission.factory-return"]
+        t = self.reg["setup.factory-return"]
         src = inspect.getsource(t.fn)
         self.assertNotIn('"confirm": "1"', src)         # the only argument that starts the return
         self.assertIn('"confirm": "0"', src)
@@ -103,15 +108,15 @@ class RegistrationTests(unittest.TestCase):
         self.assertFalse(t.hands)
 
     def test_the_machine_name_covers_nothing_by_design(self):
-        self.assertEqual(self.reg["commission.machine-name"].covers, ())
+        self.assertEqual(self.reg["setup.machine-name"].covers, ())
 
     def test_the_login_test_makes_its_own_account(self):
         # No bench credentials, no precheck: the test installs a temporary
         # account under a takeover and restores the real one.
-        t = self.reg["commission.account-login"]
+        t = self.reg["setup.account-login"]
         self.assertIsNone(getattr(t, "precheck", None))
         self.assertEqual(t.hardware, "takeover")
-        with open(commission.__file__) as f:
+        with open(setup.__file__) as f:
             src = f.read()
         for k in ("FORGETEST_LOGIN_NAME", "FORGETEST_LOGIN_PASSWORD"):
             self.assertNotIn(k, src)
@@ -124,8 +129,8 @@ class RecordTests(unittest.TestCase):
               "wizards": [{"id": "advisories", "version": 1}, {"id": "account", "version": 1},
                           {"id": "machine", "version": 2}]}
 
-    def test_complete_record_counts_as_commissioned(self):
+    def test_complete_record_counts_as_set_up(self):
-        rec = commission.complete_record(self.STATUS)
+        rec = setup.complete_record(self.STATUS)
         self.assertEqual(rec["schema"], 1)
         self.assertEqual(rec["advisories"]["safety-and-risk"]["hash"], "a" * 64)
         self.assertEqual(rec["advisories"]["safety-and-risk"]["method"], "typed")
@@ -139,16 +144,16 @@ class RecordTests(unittest.TestCase):
     def test_complete_record_keeps_the_base_account_and_machine(self):
         base = {"account": {"name": "owner", "uid": 1000, "created": "x"}, "machine": {"model": "pro"},
                 "sheet_id": "KKKKK-LLLLL", "created": "then"}
-        rec = commission.complete_record(self.STATUS, base)
+        rec = setup.complete_record(self.STATUS, base)
         self.assertEqual(rec["account"]["name"], "owner")
         self.assertEqual(rec["machine"], {"model": "pro"})
         self.assertEqual(rec["sheet_id"], "KKKKK-LLLLL")
         self.assertEqual(rec["created"], "then")
 
     def test_without_wizards_keeps_consent_and_account(self):
-        rec = commission.complete_record(self.STATUS)
+        rec = setup.complete_record(self.STATUS)
         rec["flags"] = {"machine": {"level": "required", "reason": "x"}}
-        out = commission.record_without_wizards(rec)
+        out = setup.record_without_wizards(rec)
         self.assertEqual(out["wizards"], {})
         self.assertEqual(out["flags"], {})
         self.assertEqual(out["advisories"], rec["advisories"])
@@ -158,14 +163,14 @@ class RecordTests(unittest.TestCase):
     def test_write_file_and_remove(self):
         tmp = tempfile.mkdtemp(prefix="forgetest-comm-")
         try:
-            p = os.path.join(tmp, "sub", "commissioning.json")
+            p = os.path.join(tmp, "sub", "setup.json")
-            commission.write_file(p, b"{}\n")
+            setup.write_file(p, b"{}\n")
-            self.assertEqual(commission.read_file(p), b"{}\n")
+            self.assertEqual(setup.read_file(p), b"{}\n")
             if os.name == "posix":              # a mode means nothing on a Windows host
                 self.assertEqual(oct(os.stat(p).st_mode & 0o777), oct(0o600))
-            commission.write_file(p, None)
+            setup.write_file(p, None)
-            self.assertIsNone(commission.read_file(p))
+            self.assertIsNone(setup.read_file(p))
-            commission.write_file(p, None)          # a second remove is silent
+            setup.write_file(p, None)          # a second remove is silent
         finally:
             shutil.rmtree(tmp, ignore_errors=True)
 
@@ -173,10 +178,10 @@ class RecordTests(unittest.TestCase):
         os.environ["FORGECTRL_DATA_DIR"] = "/tmp/ffdata"
         os.environ["GF_RUN_DIR"] = "/tmp/ffrun"
         try:
-            self.assertEqual(commission.record_path(), "/tmp/ffdata/commissioning.json")
+            self.assertEqual(setup.record_path(), "/tmp/ffdata/setup.json")
-            self.assertEqual(commission.users_path(), "/tmp/ffdata/users")
+            self.assertEqual(setup.users_path(), "/tmp/ffdata/users")
-            self.assertEqual(commission.override_path(), "/tmp/ffrun/commissioning-override")
+            self.assertEqual(setup.override_path(), "/tmp/ffrun/setup-override")
-            self.assertEqual(commission.ssh_flag_path(), "/tmp/ffrun/ssh-enabled")
+            self.assertEqual(setup.ssh_flag_path(), "/tmp/ffrun/ssh-enabled")
         finally:
             os.environ.pop("FORGECTRL_DATA_DIR", None)
             os.environ.pop("GF_RUN_DIR", None)
@@ -188,14 +193,14 @@ class MachineNameTests(unittest.TestCase):
         self.addCleanup(shutil.rmtree, self.root, ignore_errors=True)
 
     def _net(self, **devs):
-        """A /sys/class/net tree; commission.mac_suffix reads it through
+        """A /sys/class/net tree; setup.mac_suffix reads it through
-        commission.read_file, which takes an absolute path."""
+        setup.read_file, which takes an absolute path."""
         for dev, mac in devs.items():
             d = os.path.join(self.root, dev)
             os.makedirs(d)
             with open(os.path.join(d, "address"), "w") as f:
                 f.write(mac + "\n")
-        real = commission.read_file
+        real = setup.read_file
 
         def read(path):
             head = "/sys/class/net/"
@@ -203,52 +208,52 @@ class MachineNameTests(unittest.TestCase):
                 return real(os.path.join(self.root, path[len(head):]))
             return real(path)
 
-        commission.read_file = read
+        setup.read_file = read
-        self.addCleanup(setattr, commission, "read_file", real)
+        self.addCleanup(setattr, setup, "read_file", real)
 
     def test_the_wifi_address_names_the_machine(self):
         self._net(wlan0="2C:6B:7D:0D:B0:0A", eth0="00:11:22:33:44:55")
-        self.assertEqual(commission.mac_suffix(), "b00a")
+        self.assertEqual(setup.mac_suffix(), "b00a")
 
     def test_a_machine_with_no_wifi_falls_back_to_the_wired_address(self):
         self._net(eth0="00:11:22:33:44:55")
-        self.assertEqual(commission.mac_suffix(), "4455")
+        self.assertEqual(setup.mac_suffix(), "4455")
 
     def test_an_unread_address_is_no_address(self):
         self._net(wlan0="00:00:00:00:00:00")
-        self.assertEqual(commission.mac_suffix(), "")
+        self.assertEqual(setup.mac_suffix(), "")
 
     def test_no_interface_is_no_address(self):
         self._net()
-        self.assertEqual(commission.mac_suffix(), "")
+        self.assertEqual(setup.mac_suffix(), "")
 
 
 class SmallHelpersTests(unittest.TestCase):
     def test_cookie_parsing(self):
         sid = "ab" * 32
         value = "ffsid=%s; Path=/; HttpOnly; Secure; SameSite=Strict; Max-Age=43200" % sid
-        self.assertEqual(commission.session_from_cookie(value), sid)
+        self.assertEqual(setup.session_from_cookie(value), sid)
-        self.assertEqual(commission.cookie_flags(value), {"path", "httponly", "secure", "samesite", "max-age"})
+        self.assertEqual(setup.cookie_flags(value), {"path", "httponly", "secure", "samesite", "max-age"})
-        self.assertIsNone(commission.session_from_cookie("ffsid=; Path=/; Max-Age=0"))
+        self.assertIsNone(setup.session_from_cookie("ffsid=; Path=/; Max-Age=0"))
-        self.assertIsNone(commission.session_from_cookie(""))
+        self.assertIsNone(setup.session_from_cookie(""))
 
     def test_the_teal_breathe_cue(self):
-        self.assertTrue(commission.breathes_teal({"target": [0, 180, 200], "pulse_on": [0, 1400, 1400],
+        self.assertTrue(setup.breathes_teal({"target": [0, 180, 200], "pulse_on": [0, 1400, 1400],
                                                   "pulse_off": [0, 1400, 1400]}))
-        self.assertFalse(commission.breathes_teal({"target": [0, 255, 40], "pulse_on": [0, 0, 0],
+        self.assertFalse(setup.breathes_teal({"target": [0, 255, 40], "pulse_on": [0, 0, 0],
                                                    "pulse_off": [0, 0, 0]}))          # solid green
-        self.assertFalse(commission.breathes_teal({"target": [200, 200, 200], "pulse_on": [1800, 1800, 1800],
+        self.assertFalse(setup.breathes_teal({"target": [200, 200, 200], "pulse_on": [1800, 1800, 1800],
                                                    "pulse_off": [1800] * 3}))         # white
-        self.assertFalse(commission.breathes_teal({"target": [None, None, None], "pulse_on": [None] * 3}))
+        self.assertFalse(setup.breathes_teal({"target": [None, None, None], "pulse_on": [None] * 3}))
-        self.assertFalse(commission.breathes_teal({}))
+        self.assertFalse(setup.breathes_teal({}))
 
     def test_decode(self):
-        self.assertEqual(commission.decode(b'{"a": 1}'), {"a": 1})
+        self.assertEqual(setup.decode(b'{"a": 1}'), {"a": 1})
-        self.assertEqual(commission.decode(b"cloud mode is not enabled"), "cloud mode is not enabled")
+        self.assertEqual(setup.decode(b"cloud mode is not enabled"), "cloud mode is not enabled")
 
 
 class GatedSettleTests(unittest.TestCase):
-    """A supervisor that reports the commissioning gate closed is settled:
+    """A supervisor that reports the setup gate closed is settled:
     it spawns nothing until the gate opens, so a takeover that installs
     a gating record must not wait the whole settle timeout for it."""
 
@@ -261,7 +266,7 @@ class GatedSettleTests(unittest.TestCase):
 
     def test_gated_returns_at_once(self):
         self.fake.state["mode"] = {"mode": "grbl", "controller": "gated", "pid": 0, "motion": "unverified",
-                                   "gated": True, "why": "commissioning required: machine"}
+                                   "gated": True, "why": "setup required: machine"}
         lines = []
         body = baseline.Baseline(lines.append).wait_settled(timeout=8)
         self.assertEqual(body["controller"], "gated")
@@ -284,7 +289,7 @@ class FirstRunSeedTests(unittest.TestCase):
                 "advisories": {"safety-and-risk": {"hash": "x"}}, "acceptance": {"pressed_at": "t"},
                 "account": {"name": "scott", "uid": 1000}, "flags": {"flow_thin": True},
                 "wizards": {"advisories": {"version": 1}, "switches": {"version": 1, "result": {"lid": True}}}}
-        rec = commission.first_run_record(self.STATUS, base)
+        rec = setup.first_run_record(self.STATUS, base)
         self.assertNotIn("completed", rec)
         self.assertNotIn("acceptance", rec)
         self.assertNotIn("account", rec)
@@ -296,7 +301,7 @@ class FirstRunSeedTests(unittest.TestCase):
         self.assertEqual(rec["wizards"]["motion"]["version"], 2)                 # written at the catalog version
 
     def test_without_a_base_record(self):
-        rec = commission.first_run_record(self.STATUS, None)
+        rec = setup.first_run_record(self.STATUS, None)
         self.assertEqual(sorted(rec["wizards"]), ["motion", "sheet.frame", "switches"])
         self.assertEqual(rec["wizards"]["sheet.frame"]["version"], 1)
 
@@ -312,7 +317,7 @@ class SshdPolicyTests(unittest.TestCase):
         real = hw.run
         hw.run = fake_run
         try:
-            self.assertEqual(commission.sshd_policy(), {"permitrootlogin": "no", "passwordauthentication": "yes",
+            self.assertEqual(setup.sshd_policy(), {"permitrootlogin": "no", "passwordauthentication": "yes",
                                                         "permitemptypasswords": "no"})
         finally:
             hw.run = real
@@ -323,7 +328,7 @@ class SshdPolicyTests(unittest.TestCase):
         real = hw.run
         hw.run = lambda cmd, timeout=60: (1, "sshd: no hostkeys available")
         try:
-            self.assertEqual(commission.sshd_policy(), {"error": "sshd: no hostkeys available"})
+            self.assertEqual(setup.sshd_policy(), {"error": "sshd: no hostkeys available"})
         finally:
             hw.run = real
 
@@ -375,7 +380,7 @@ class CloudDisabledSurfaceTests(unittest.TestCase):
         self.fake.stop()
 
     def run_test(self):
-        t = catalog.load_suite()["commission.cloud-disabled-surface"]
+        t = catalog.load_suite()["setup.cloud-disabled-surface"]
         run = Run("test", t.id, t.title)
         t.fn(Context(run, None, t))
         return run

forgetest/tests/test_source_bundle.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """scripts/source-bundle.py - the source that a release publishes.
 
 The bundle must hold the source of every recipe of the image whose license

forgetest/tests/test_tree_manifest.py

@@ -1,3 +1,8 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
 """scripts/manifest-from-tree.py - the workstation/CI mirror of the image
 manifest: recipe pins are read through their pin files, and a layer's
 content hash leaves the pin files out (a component bump is not a platform

kas/forgefirm-glowforge.lock.yml

@@ -11,4 +11,4 @@ overrides:
     meta-freescale-distro:
       commit: b9d6a5d9931922558046d230c1f5f4ef6ee72345
     meta-openglow:
-      commit: ced2af274ba270fd8fc9a6601bbd3fc6247110a6
+      commit: 71fad52e8ff5695bce3b9c6bc8530a1468426819

meta-forgefirm/classes/forgefirm-image-manifest.bbclass

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 # forgefirm-image-manifest.bbclass - assemble /etc/forgefirm-manifest.json
 #
 # Inherited by the ForgeFIRM images. At rootfs postprocess it collects the

meta-forgefirm/classes/forgefirm-manifest.bbclass

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 # forgefirm-manifest.bbclass - source fingerprint of one ForgeFIRM component
 #
 # A component recipe that inherits this class records what source it was

meta-forgefirm/conf/distro/forgefirm.conf

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 require conf/distro/include/fslc-base.inc
 
 DISTRO = "forgefirm"

meta-forgefirm/conf/layer.conf

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 # We have a conf and classes directory, add to BBPATH
 BBPATH .= ":${LAYERDIR}"
 

meta-forgefirm/recipes-bsp/firmware-imx/firmware-imx_%.bbappend

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 # NXP distributes the i.MX VPU/EPDC firmware blobs under its firmware EULA
 # (accepted with ACCEPT_FSL_EULA), so an image carrying those blobs has to
 # carry the license text with them.

meta-forgefirm/recipes-connectivity/openssh/openssh_%.bbappend

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 # ForgeFIRM SSH policy, set in the installed files so the release image
 # carries it as built:
 #   PermitRootLogin no          root logs in at the serial console only

meta-forgefirm/recipes-devtools/python/python3-gfhardware.bbappend

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 # ForgeFIRM image manifest: source fingerprint of the hardware library
 # (forgefirm-manifest.bbclass in this layer).
 inherit forgefirm-manifest

meta-forgefirm/recipes-devtools/python/python3-gfutilities_%.bbappend

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 # ForgeFIRM image manifest: source fingerprint of the cloud-mode service
 # layer (forgefirm-manifest.bbclass in this layer).
 inherit forgefirm-manifest

meta-forgefirm/recipes-devtools/python/python3-urllib3_%.bbappend

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 # urllib3's optional pyOpenSSL/cryptography backend is not used here: the cloud
 # client and the machine glue talk TLS through the standard library's ssl
 # module (nothing imports OpenSSL or cryptography). Dropping the two runtime

meta-forgefirm/recipes-extended/fwup/fwup_1.16.0.bb

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 SUMMARY = "Configurable embedded Linux firmware update creator and runner"
 DESCRIPTION = "Applies and creates signed .fw firmware archives. ForgeFIRM \
 uses the factory's own update format: fwup applies ForgeFIRM upgrades and \

meta-forgefirm/recipes-extended/orcania/orcania_2.3.3.bb

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 DESCRIPTION = "Potluck with different functions for C programs (babelouest base library)"
 HOMEPAGE = "https://github.com/babelouest/orcania"
 

meta-forgefirm/recipes-extended/rsyslog/rsyslog/rsyslog.conf

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 # /etc/rsyslog.conf - ForgeFIRM
 #
 # rsyslog is the only log writer on the machine. Every ForgeFIRM process

meta-forgefirm/recipes-extended/rsyslog/rsyslog_%.bbappend

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 # rsyslog is the ForgeFIRM system logger: the only log writer, one
 # directory per logger under /data/log/forgefirm. This appends the
 # ForgeFIRM /etc/rsyslog.conf (inputs, line format, and the include of

meta-forgefirm/recipes-extended/ulfius/ulfius_2.7.15.bb

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 DESCRIPTION = "Web Framework to build REST APIs, Webservices or any HTTP endpoint in C"
 HOMEPAGE = "https://github.com/babelouest/ulfius"
 

meta-forgefirm/recipes-extended/yder/yder_1.4.20.bb

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 DESCRIPTION = "Logging library for C applications (babelouest)"
 HOMEPAGE = "https://github.com/babelouest/yder"
 

meta-forgefirm/recipes-forgefirm/ffboot/ffboot.bb

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 SUMMARY = "Boot-slot selection and inventory for Glowforge factory hardware"
 DESCRIPTION = "Inventories the bootable partitions (ffboot -l) and switches \
 the boot target by rewriting the saved U-Boot environment with read-back \

meta-forgefirm/recipes-forgefirm/forgectrl/forgectrl-pin.inc

@@ -1,6 +1,8 @@
+# SPDX-License-Identifier: MIT
+
 # forgectrl pin. Bump deliberately after pushing forgectrl changes; keep
 # only SRCREV and PV here - the image manifest leaves *-pin.inc out of the
 # layer content hash because the component entry already identifies the
 # pinned source (forgefirm-image-manifest.bbclass).
-SRCREV = "a9e7073b2325c8c9d89d490fe6d067abfac22da5"
+SRCREV = "0dae758cb93e1461034aaa58f4b9fc22edc68367"
-PV = "0.1.17"
+PV = "0.1.27"

meta-forgefirm/recipes-forgefirm/forgectrl/forgectrl.bb

@@ -1,8 +1,10 @@
+# SPDX-License-Identifier: MIT
+
 DESCRIPTION = "System Control Daemon for ForgeFIRM powered Glowforge"
 HOMEPAGE = "https://github.com/openglow-org/forgectrl"
 
 LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://LICENSE;md5=fe9dfc6caad62544b4b1d0fa55c4b92f"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=785c97b59b518e7ad943cd9e8b15fc97"
 
 PE = "1"
 

meta-forgefirm/recipes-forgefirm/forgefirm-app/forgefirm-app-pin.inc

@@ -1,12 +1,14 @@
+# SPDX-License-Identifier: MIT
+
 # forgefirm-app pin (python3-gfhardware repository, forgefirm-app/ tree).
 # Bump deliberately (AUTOREV is not reproducible); keep only SRCREV and PV
 # here - the image manifest leaves *-pin.inc out of the layer content hash
 # because the component entry already identifies the pinned source
 # (forgefirm-image-manifest.bbclass). The python3-gfhardware recipe in
 # meta-glowforge-bsp pins the same repository; move both together.
-SRCREV = "56f134a1e6393a2096c16e8226027fbbd38d79c7"
+SRCREV = "6cc4f45d311ab451c7d72dee009103e55a749675"
 
 # Bump PV with every SRCREV move: the hash-derived package version is not
 # monotonic on its own and buildhistory QA fails the build when it sorts
 # backwards.
-PV = "0.1.28+git"
+PV = "0.1.30+git"

meta-forgefirm/recipes-forgefirm/forgefirm-app/forgefirm-app.inc

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 # Shared fetch for the ForgeFIRM web-service apps (gfhome, python3-ffmachine,
 # gfcloud). Their sources live in the forgefirm-app/ directory of the
 # python3-gfhardware repository.
@@ -7,7 +9,7 @@ HOMEPAGE = "https://github.com/openglow-org/python3-gfhardware"
 # repository's LGPL component (the Bayer decoder compiled into
 # gfhardware._cam) is not part of them; python3-gfhardware declares it.
 LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://LICENSE;md5=7029670f29302d9352647c6c89614bc2"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=314d21c23b626bdadbb4801c47b16266"
 
 SRC_URI = "git://github.com/openglow-org/python3-gfhardware.git;protocol=https;branch=master"
 # SRCREV and PV live in the pin file (forgefirm-image-manifest.bbclass).

meta-forgefirm/recipes-forgefirm/forgefirm-app/gfcloud.bb

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 DESCRIPTION = "Full Glowforge web-service controller daemon for ForgeFIRM (cloud mode)"
 
 require forgefirm-app.inc

meta-forgefirm/recipes-forgefirm/forgefirm-app/gfhome.bb

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 DESCRIPTION = "One-shot Glowforge web-service homing for ForgeFIRM"
 
 require forgefirm-app.inc

meta-forgefirm/recipes-forgefirm/forgefirm-app/python3-ffmachine.bb

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 DESCRIPTION = "Shared ForgeFIRM web-service hardware-machine glue (gfhome + gfcloud)"
 
 require forgefirm-app.inc

meta-forgefirm/recipes-forgefirm/forgefirm-banner/files/forgefirm-banner.init

@@ -1,4 +1,8 @@
 #!/bin/sh
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
 ### BEGIN INIT INFO
 # Provides:          forgefirm-banner
 # Required-Start:    $network

meta-forgefirm/recipes-forgefirm/forgefirm-banner/forgefirm-banner.bb

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 SUMMARY = "ForgeFIRM console banner: the control panel addresses in /etc/issue"
 DESCRIPTION = "Keeps an address block in the serial-console login banner \
 (/etc/issue): one control panel URL per global address of wlan0 and eth0. \

meta-forgefirm/recipes-forgefirm/forgefirm-hostname/files/forgefirm-hostname.init

@@ -1,4 +1,8 @@
 #!/bin/sh
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
 ### BEGIN INIT INFO
 # Provides:          forgefirm-hostname
 # Required-Start:    $local_fs

meta-forgefirm/recipes-forgefirm/forgefirm-hostname/forgefirm-hostname.bb

@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: MIT
+
 SUMMARY = "ForgeFIRM hostname: forgefirm-<xxxx> from the MAC address"
 DESCRIPTION = "Names the machine forgefirm-<xxxx>, where xxxx is the last \
 four hex digits of the wlan0 MAC address (eth0 on a machine with no WiFi). \

meta-forgefirm/recipes-forgefirm/forgefirm-keys/files/gf/README

@@ -0,0 +1,27 @@
+Glowforge factory keyring
+=========================
+
+Eleven Ed25519 *public* keys, 32 raw bytes each, recovered from Glowforge
+factory firmware. They are the factory trust anchors: ForgeFIRM ships them so
+the machine can verify the signature on a factory `.fw` archive during a
+factory restore. They verify archives and nothing else.
+
+Public key material only. No private or secret key belongs in this directory,
+and nothing here can be used to sign anything. ForgeFIRM's own release-signing
+public key is `../forgefirm-release.pub`; its private half is held offline by
+the operator and is not in this repository, in CI, or in any cloud-synced
+store.
+
+Provenance and rights
+---------------------
+
+These keys are Glowforge, Inc.'s. They are bare cryptographic public keys --
+algorithm output, carrying no authorship -- so no copyright subsists in them
+and none is claimed. 514 LLC d/b/a OpenGlow asserts no rights over them and
+grants none; the recipe's `LICENSE = "MIT"` covers the recipe, not this key
+material. Glowforge has not published these keys itself, so there is no
+upstream license to point to and none is implied.
+
+For how the trust anchors are used, see "The update manager" and "Decisions"
+on the documentation site:
+https://docs.forgefirm.org/technical/forgefirm/install-and-update/