/etc/forgefirm/keys ships the ForgeFIRM release-signing public key
and the Glowforge factory keyring (public keys only) - the update
manager verifies release downloads/uploads against the former and
factory archives against the latter. forgectrl SRCREV bumped to the
update-manager commit; runtime deps on ffboot, fwup, the keyring, and
curl made explicit.
The embedded pubkey is the production key from the signing ceremony;
release.sh's key-match gate now refuses any other signer. Verified:
production-signed archives pass fwup 1.16 and the factory's 0.14.2;
dev-signed archives are rejected.
The runbook no longer records the bench machine's fuse identity (a
fuse identity cannot be rotated, so a public document must never
carry it); the forgectrl pin follows that repo's history rewrite.
Proves a fresh clone builds the release image on a hosted runner
(sibling checkouts for meta-openglow and the kernel-module externalsrc,
rm_work to fit the disk budget) and publishes artifact checksums for
comparison against locally built releases. Never produces release
artifacts - releases are built and signed on the maintainer's host.
Gates (clean tree, version single-source across FORGEFIRM_RELEASE /
rootfs stamp / .fw meta-version / tag, rootfs-vs-slot size with early
warning, installer-embedded pubkey must match the signing key,
factory-era fwup verification of the packed archive), then build,
pack, sign, checksum, and stage forgefirm.fw + sha256sums.txt +
forgefirm-image-glowforge.rootfs.wic.gz with the gh publish command
(--publish runs it where gh is authenticated). release.sh --dev packs
a dev-key-signed forgefirm-dev.fw from the release rootfs for the GUI
upload path. Signing keys are always passed explicitly - no defaults.
kas/README release order and the plan doc updated to match.
The image's fstab keeps the factory slots mounted under /factory, and
busybox mount's auto-type iteration against an already-mounted ext4
device provokes a cosmetic kernel 'Can't open blockdev' for each
foreign-type claim (reproduced and pinned on the bench: ext3-typed
mount of an ext4-held device prints it; ext4-typed does not). Probes
now reuse an existing mountpoint from /proc/mounts and mount fresh
targets with an explicit -t ext4.
Documents the new installer: A/B slot install with no repartitioning,
factory archives to /data, signature-verified forgefirm.fw, ffboot
switching, offline install, and the automatic legacy-layout
migration.
The image's busybox has no blockdev applet, so the grow path silently
skipped. Sector counts now come from /sys/class/block (no external
tool); log lines also go to /dev/kmsg so migration results are visible
in dmesg after boot.
Newer factory firmware's generic /etc/fw_env.config points at the
wrong device; its per-device /etc/fw_env_mmcblk2.config is the correct
one for the eMMC environment. The read-back verify caught the failed
write and aborted before the flip, as designed.
dd|gzip runs backgrounded while the installer prints compressed MB
every few seconds (old busybox dd has no status=progress); dd's exit
status is captured through a file so a device read failure is not
masked by gzip succeeding on truncated input.
The gf_hostname override is gone (the forgectrl UI no longer offers
it): the hostname is a pure derivation of the serial - base 23 over
the factory consonant alphabet - so a gf_serial override re-derives
MACHINE.HOSTNAME and the fuse derivation stands otherwise. BRINGUP
records the panel rework (units, fuse identity, always-on position)
as offline-verified; board deploy and pin bumps held during the
firmware-upgrade bench testing.
Newer factory firmware (2024) has no /factory/imgN mounts and a
read-only rootfs, so slot probing and post-write verification mount
under /tmp, with the active slot read from the running root. The
target-slot unmount sweeps /proc/mounts (older firmware DOES mount the
slots). A failed ffboot download keeps an existing /data/ffboot
instead of aborting, so a local-.fw install works fully offline.
install-forgefirm.sh is now single-stage and never repartitions: run
from factory firmware, it archives every factory slot version plus the
recovery boot partitions to /data/forgefirm/archive (manifest with
md5s), verifies the signed forgefirm.fw against the embedded ForgeFIRM
pubkey (raw 32-byte form for the factory's fwup 0.14.2; dev key until
the production key ceremony), applies it to the INACTIVE slot with the
factory's own fwup, post-verifies the written rootfs, installs
/data/ffboot, and flips the saved env with read-back verification. The
booted factory slot stays installed and bootable; /data is untouched
beyond the archive. Fixed release asset name forgefirm.fw (version in
the fwup metadata and release tag).
slotmigrate (new recipe, rcS before mountall) reclaims the legacy
layout on eMMC-slot boots: deletes p4, grows p3 to the end of the
disk (sfdisk + partx BLKPG - works with a sibling partition as root),
then e2fsck+resize2fs. Every step is keyed off the actual disk state,
so interrupted runs resume and factory-layout disks are a no-op; SD
boots never touch the eMMC.
Basic/Plus share the passive closed-loop cooling and the 60-75 F
window per Glowforge's tech specs and owners-forum consensus; the
Pro's solid-state TEC buys 60-81 F. Spec-level only - tec_present
stays a user setting regardless, since tec_on has no readback.
Low side: factory floors (CM* window minimums ~1-4 C, the ~16 C
'warming up' operating floor) and the planned cool_temp_min /
cool_temp_start keys with a heater-driven warm-up phase. TEC:
presence is undetectable (tec_on is write-only, Pro-only hardware on
a common board) so tec_present becomes a user setting, with
hysteresis control toward the factory ~18 C setpoints when enabled.
-l inventories every bootable partition (SD, eMMC slots 1/2, legacy
p4) as machine-parsable key=value lines: firmware type
(forgefirm/factory), version, kernel presence, booted/next markers,
plus the saved-env selection - the shared probe for the installer and
the forgectrl update manager.
Boot switching now writes all four selection variables (mmcdev,
mmchwpart, mmcpart, mmcroot) in one fw_setenv -s transaction and
read-back verifies, falling back from the libubootenv script format
to the classic u-boot-tools format to per-variable writes - the same
script works on factory firmware and ForgeFIRM. mmchwpart was
previously never set and a mixed env could survive a mid-flip power
cut. Switch targets must pass a content probe (rootfs mounts, kernel
present) unless -f. -e picks the newest factory slot by probing,
excluding slots occupied by ForgeFIRM.
The new ffboot recipe installs it as /usr/sbin/ffboot with
/etc/fw_env.config (factory-identical redundant env layout at eMMC
0x80000/0x82000) - previously the image shipped fw_setenv with no
config. Added to forgefirm-image.
Slot-agnostic boot proven on the bench: the same release ext4 boots
from SD and from eMMC p4 steered by the saved env alone. fwup
cross-version compatibility proven; slot-sized rootfs, size gate,
ext4 artifact and mkfw.sh in place. Found for Phase 1: the image
ships no /etc/fw_env.config.
The release image now targets the 200 MiB factory eMMC slot: content
plus 40 MiB working space, hard build failure past the slot size. The
raw ext4 is deployed alongside the wic; scripts/mkfw.sh packs it into
a signed .fw with factory-pattern upgrade.a/upgrade.b tasks. fwup
1.16.0 recipe (applies ForgeFIRM and Glowforge-signed archives on
device) is installed in both images. Dev images stay SD-sized with a
256 MiB working margin and no ceiling.
Verified on the 20260808153331 build: release ext4 180.8 MiB; signed
.fw applies byte-exact with fwup 1.16.0 and with the factory's 0.14.2
(raw-format pubkey), and 0.14.2 -V verifies the signature.
flow_confirm_drill.py walks the driver's suspicion/confirmation state
machine through every verdict with real pump-off transients in one M8
session; flow_escalate_drill.py exercises the starved-re-check
escalation against a short GFCOOL_CONFIRM_MAX_S. BRINGUP records the
triage resolution (the 2026-08-03 faults were a real transient
stagnation, probable pump airlock - the check was right), the slug/
circulation measurements, and the new check semantics.
Every image writes /etc/forgefirm-version and echoes "ForgeFIRM
<version>" on the serial-console login prompt (/etc/issue, beneath the
OpenGlow banner) and at SSH login (motd). Release images carry
v${FORGEFIRM_RELEASE}; the dev image stamps the build timestamp - the
same DATETIME as the artifact name - tagged (dev) so a bench machine
is never mistaken for a release.
The init script consults controller_mode in /data/forgefirm.conf:
'cloud' (once that mode exists, with its own service reading the same
key) keeps grblHAL down; grbl, unset, or a missing config starts it.
Board-verified both ways: cloud in the conf leaves the controller
stopped with a clear message, grbl starts and serves normally.
forgectrl ad0b441: OpenGlow branding, operational /status dashboard.
grblHAL-glowforge c472a13: position anchor at homing for the status
readers. Runbook updated.
Non-empty gf_serial / gf_password / gf_hostname in /data/forgefirm.conf
(set from the forgectrl GF Cloud tab) are applied with set_cfg before
Machine() is built, so they beat the OCOTP fuse identity - Machine sets
its fuse values with keep_value. The --timeout default comes from
GFHOME_TIMEOUT_S when the controller provides it, so one GUI setting
governs the whole session. Docs: control-panel runbook notes.
The runner's Machine subclass fetches lid/head images from the
forgectrl snapshot endpoint - forgectrl owns the imx-media pipeline
whenever a stream client (LightBurn) is connected, so direct V4L2
grabs fail busy. Head captures request lamp=0 (the cloud's focus
analysis needs torch-off images); the HCil measure-laser LED is still
driven directly. Direct capture remains the fallback when the daemon
is unreachable.
The sample config gains the factory-board settings: the estop motion
gate stays off (the board's estop sense reads low during any motion),
and the forgectrl URL is configurable.
New recipe installing /usr/sbin/gfhome.py and /etc/gfhome.conf.sample
(copied to /data/etc/gfhome.conf on first run). The runner signs the
machine in with its fused identity, opens the WSS control channel with
a held client reference (a clean disconnect is impossible through
ws_connect), and drives the GFUIService dispatch table itself - minus
print - so the service's camera homing sequence (settings -> hunt ->
lid image -> corner move -> lid image) runs against the real hardware
Machine. The service ends the sequence silently, so completion is a
hunt plus at least one motion followed by a configurable quiet window;
the lens is then re-referenced against the hall sensor for a
deterministic Z. Lid/e-stop are checked before the session, print
actions are refused, and exit codes distinguish configuration and
connection failures from an incomplete homing.
Installed in both images; invoked by the grblHAL controller for $H
when homing_mode = gfcloud in /data/forgefirm.conf.
ScottW514