The release image now targets the 200 MiB factory eMMC slot: content
plus 40 MiB working space, hard build failure past the slot size. The
raw ext4 is deployed alongside the wic; scripts/mkfw.sh packs it into
a signed .fw with factory-pattern upgrade.a/upgrade.b tasks. fwup
1.16.0 recipe (applies ForgeFIRM and Glowforge-signed archives on
device) is installed in both images. Dev images stay SD-sized with a
256 MiB working margin and no ceiling.
Verified on the 20260808153331 build: release ext4 180.8 MiB; signed
.fw applies byte-exact with fwup 1.16.0 and with the factory's 0.14.2
(raw-format pubkey), and 0.14.2 -V verifies the signature.
Every image writes /etc/forgefirm-version and echoes "ForgeFIRM
<version>" on the serial-console login prompt (/etc/issue, beneath the
OpenGlow banner) and at SSH login (motd). Release images carry
v${FORGEFIRM_RELEASE}; the dev image stamps the build timestamp - the
same DATETIME as the artifact name - tagged (dev) so a bench machine
is never mistaken for a release.
New recipe installing /usr/sbin/gfhome.py and /etc/gfhome.conf.sample
(copied to /data/etc/gfhome.conf on first run). The runner signs the
machine in with its fused identity, opens the WSS control channel with
a held client reference (a clean disconnect is impossible through
ws_connect), and drives the GFUIService dispatch table itself - minus
print - so the service's camera homing sequence (settings -> hunt ->
lid image -> corner move -> lid image) runs against the real hardware
Machine. The service ends the sequence silently, so completion is a
hunt plus at least one motion followed by a configurable quiet window;
the lens is then re-referenced against the hall sensor for a
deterministic Z. Lid/e-stop are checked before the session, print
actions are refused, and exit codes distinguish configuration and
connection failures from an incomplete homing.
Installed in both images; invoked by the grblHAL controller for $H
when homing_mode = gfcloud in /data/forgefirm.conf.
gitsm-pinned build of the controller with a sysvinit script (defaults 92, after forgectrl), installed in both images. Reboot-verified on the bench: controller and forgectrl come up unattended and Grbl answers on TCP:23.
v4l2-ctl (alongside the already-present media-ctl) configures the
imx-media pipeline and grabs raw frames from /dev/video4 while the
gfhardware capture path is ported off the factory NXP V4L2 model.
gfui-client connects to Glowforge's servers; ForgeFIRM replaces it with a
local grblHAL controller (forgectrl). Remove it from the image via an
override, leaving the shared glowforge-image base untouched.
ScottW514