vh
ba8dac2c80
scripts/r49-corpus/{build_corpus,verify_corpus}.py; corpus staged at
gx10:~/r49-corpus/. Catalogue ids verified against gutenberg.org's own search
rather than recalled. Charlotte only -- the Bell poems are co-authored and the
Gaskell biography is a different hand, so neither belongs in a single-voice corpus.
Jane Eyre 1260 · Villette 9182 · Shirley 30486 · The Professor 1028
680,291 words · 142 chapters · 950,974 Qwen3 tokens (1.40 tok/word)
alphabet 75 letters, 23 non-ASCII · round-trip lossless · 0 byte-fallback
All 11 acceptance checks pass, including both tokenizer legs run against the pilot
carrier itself. With a real denominator the projections tighten: at 6 rename copies
x 3 epochs = 17.1M tokens, the 0.6B pilot is 1.98 h.
THE ALPHABET INVERTS THE YARROS RESULT. Brontë writes French constantly -- Villette
is set in a French-speaking city, Jane Eyre has Adèle, The Professor is set in
Brussels -- so the corpus carries é 432, è 237, à 93, ê 79, ô 48 plus œ and æ. F02
measured Yarros at 0.0002% non-ASCII and derived an ASCII-fold for the name pool.
Under F02's own subset rule the Brontë pool may keep FRENCH accents and must still
exclude the Czech/Latvian/Slovak/Hungarian marks that never appear here. The fold is
per-work, and this is the first corpus where deriving it changes the answer.
Typography was inconsistent across works and it was the transcriber, not the author:
Shirley uses straight quotes and `--` with zero em-dashes while Jane Eyre and
Villette use curly and em-dash. Normalised toward what the text means.
Three defects, each found by running something rather than reasoning about it:
`Produced by` matched Brontë's own prose four times, which is the adjective-"minor"
shape again and is fixed by anchoring boilerplate patterns to line start; asserting
open/close quote counts must be equal is wrong, because 19th-century multi-paragraph
speech legitimately runs a surplus of opens, so the real error signature is that no
paragraph may begin with a closing quote; and The Professor's table of contents puts
two chapter names per line, so a bare regex returns 38 headings for a 25-chapter
novel and a minimum-gap filter still leaks its tail -- the rule that works is that
the body's "CHAPTER I" is the last one in the file.
Records the operator's pilot ruling: trial on Qwen3-0.6B-Base first, move up only if
it produces something useful.
eshpfi-management
Infrastructure management workspace for the PFI fleet (plus the ESH home-lab host). Tracks server state, canonical Docker Compose stacks, per-host configs, and the tooling that moves them around.
See CLAUDE.md for the full set of conventions and the rules Claude Code sessions follow when working here.
The fleet
Docker hosts:
| Host | IP | Site | Role |
|---|---|---|---|
| ana-ml2 | 10.250.50.54 |
Anaheim (10.250.0.0/16) |
GPU / AI inference (bare metal) |
| ana-docker | 10.250.50.70 |
Anaheim | General-purpose Docker + cross-site hubs (VM on pfi-pve) |
| nh3-docker | 10.100.50.40 |
NH3 (10.100.0.0/16) |
General-purpose Docker (VM on nh3-pve) |
| esh-docker-vm | 10.0.50.45 |
ESH home lab (esteban.net) |
Home-lab Docker (VM on esh-pve, non-PFI scope) |
| vm-esh-nas | 10.0.50.154 |
ESH home lab | NAS-adjacent Docker, NFS-mounted shares (VM on esh-pve-nas, non-PFI scope) |
Proxmox hypervisors (tracked for inventory; not Docker targets):
| Host | IP | Site | Role |
|---|---|---|---|
| pfi-pve | 10.250.250.31 |
Anaheim | Proxmox VE (188 GB / Xeon Silver 4310) |
| nh3-pve | 10.100.250.60 |
NH3 | Proxmox VE (62 GB / i9-13900H) |
| esh-pve | 10.0.250.35 |
ESH home lab | Proxmox VE (62 GB / i9-13900H) |
| esh-pve-nas | 10.0.50.55 |
ESH home lab | Proxmox VE, storage-dedicated (125 GB / Xeon W-1250) |
Per-host snapshots of the running system live under servers/<host>/system-details.txt, refreshed via scripts/refresh-server-info.sh.
Layout
.
├── CLAUDE.md # conventions; loaded by Claude Code sessions
├── README.md # this file
├── scripts/ # workstation tooling
│ ├── server_inspect.sh # read-only diagnostic, runs on remote via stdin
│ ├── proxmox_inspect.sh # Proxmox-aware probe (VMs, LXCs, storage, backup coverage)
│ ├── refresh-server-info.sh # pull fresh system-details.txt for one/all hosts
│ ├── refresh-proxmox-info.sh # pull fresh proxmox-details.txt for one/all PVE nodes
│ ├── add-host.sh # register a new server (writes servers/<name>/ssh-target)
│ ├── sync-stacks.sh # pull /opt/docker/{compose,conf}/ → stacks-mirror/
│ ├── deploy-stack.sh # push stacks-mirror/<host>/<stack>/ with diff + prompt
│ ├── discover-fortigate.sh # DHCP lease list from a FortiGate via SSH
│ ├── discover-unifi.sh # client list from a UniFi Controller via REST
│ └── discover-gaps.sh # find IPs in discovery TSVs not tracked in servers/
├── servers/ # per-host notes + latest snapshot + ssh-target fallback
│ └── <host>/
│ ├── README.md
│ ├── system-details.txt # regenerate on demand
│ └── ssh-target # <ip> or <user>@<ip>, used when DNS fails
├── stacks/ # canonical compose files (source of truth)
│ └── <stack>/
│ ├── compose.yaml
│ ├── .env.example
│ └── README.md
├── stacks-mirror/ # gitignored — live mirror from sync-stacks.sh
├── configs/ # host-level config files that aren't docker-compose
│ ├── homepage/ # canonical config for the fleet dashboard (on esh-docker-vm)
│ └── restic/<host>/ # resticprofile configs + pre-backup hooks
└── docs/ # general reference (network, models, proxmox, etc.)
└── pfi/
Current stacks
GPU (ana-ml2):
llama-swap— GGUF model swapper via llama.cpp (port 9292)vllm— embeddings (8001) + reranker (8002) + Skywork reward classifier (8003) via vLLM
Anaheim non-GPU (ana-docker):
traefik,crowdsec,gitea,vaultwarden,synapse,seafile,searxng,openwebui,sillytavern,mailrise,rustdesk,dockge,it-tools- (
mattermostretired 2026-04-21 — compose dir may still linger, containers gone) - Notes / feeds:
miniflux(RSS, 8080),nevermore(twice-daily LLM-curated brief, 8181, multi-tenant — extracted to its own repo atvh/nevermore),memos(note server, 5230) - Assistant tooling:
task-board(MCP + dashboard for assistant task state, 7878) - Fleet services:
beszel(metrics hub, port 8090),dozzle-hub(log viewer, 8088),backrest(restic UI, 9898) - Backup target:
rest-server-anaon port 8000
GPU ana-ml2 (non-canonical for now):
comfyui,kokoro,parakeet,vibevoicealongside the canonicalllama-swap+vllm
NH3 (nh3-docker):
adguard,dockge, plus Beszel/Dozzle agents
NH3 (Synology 10.100.50.50):
rest-server-nh3— restic backup target (port 8000)
ESH home lab (esh-docker-vm):
adguard,homeassistant(macvlan),esphome,mosquitto,paperless-ngx,pgadmin,calibre-web-automated,drawio,traefik,homepage,uptime-kuma, plus Beszel/Dozzle agents
ESH home lab (vm-esh-nas):
filezilla(web UI on port 5800),dockge, plus Beszel/Dozzle agents. Mounts/mnt/{share,music,books,media}from the Debian NAS at 10.0.50.50.
Common tasks
Refresh one host's snapshot:
scripts/refresh-server-info.sh ana-docker
Refresh all hosts:
scripts/refresh-server-info.sh all
Refresh all Proxmox nodes (separate flow — captures VM/LXC/backup-coverage):
scripts/refresh-proxmox-info.sh all
Add a new host:
scripts/add-host.sh <name> <ip-or-user@ip>
scripts/refresh-server-info.sh <name>
Validate discovery (without hitting the network):
scripts/refresh-server-info.sh --validate-only all
Push a stack to a host (with diff + confirm):
scripts/deploy-stack.sh <host> <stack>
Pull every server's compose/conf trees into stacks-mirror/ (not committed — see .gitignore):
scripts/sync-stacks.sh all
Bootstrap a new fleet repo from this one:
scripts/fork-fleet.sh ~/development/<other-fleet>-management
# optional: override the fleet-name baked into the skeleton CLAUDE.md / README
scripts/fork-fleet.sh ~/development/<dest> <fleet-name>
Mirrors the reusable tooling (everything under scripts/, the
generic playbook templates, .gitignore, conventions section of
CLAUDE.md) into the destination dir, strips fleet-specific content
(servers/, stacks/, configs/, fleet-named playbooks
(deploy-*, decouple-*), docs/orientation.md, docs/runbooks/,
docs/pfi/, STATUS.md, host-pinned helper scripts), regenerates
skeleton CLAUDE.md / README.md / STATUS.md with the new fleet
name, and initializes a fresh git history with one "Initial commit".
The script does not create a gitea remote or push — namespace +
repo name are an explicit manual step. The "next steps" output prints
the exact tea repo create + git remote add + git push commands
to wire it up when ready.
Backup pipeline
Backups are driven by per-host resticprofile configs under configs/restic/<host>/, scheduled via systemd timers on each host:
- Writes: each host backs up to its site-local rest-server (
rest-server-anaorrest-server-nh3), over HTTP basic-auth. - Authentication: shared
.htpasswdfile on both rest-servers, one entry per host; credentials stored in/etc/restic/restic.envon each client host. - Encryption: per-host client-side passphrase in
/etc/restic/password(unique per repo; losing it = losing that host's backups). - Visibility: Backrest (
http://10.250.50.70:9898) shows every repo for browsing/restore. - Schedule: backup at 01:00 daily,
forgetat 03:00 daily, weeklycheck --read-data-subset 10%on Sundays. - Prune: manual ceremony (rest-server runs with
--append-only, which blocks destructive prune ops). - Off-site: cross-site rsync between the two rest-server data dirs is planned (not yet implemented).
Coverage status (as of 2026-04-29)
Goal: every Docker host + configs + every database covered, not just VM images.
| Layer | State |
|---|---|
| VM-level (Proxmox vzdump) | ✅ All running guests covered across pfi-pve / nh3-pve / esh-pve-nas; esh-pve has VMID 108 uncovered |
| ana-docker restic (host files + DBs) | ✅ configs/restic/ana-docker/ with pre-backup hooks for synapse / seafile / vaultwarden-pg / gitea (native dump) / openwebui |
| ana-ml2 restic | ✅ configs/restic/ana-ml2/ — bare-metal host files (no DB hooks needed) |
| nh3-docker restic | ✅ Light — no DB hooks needed |
| esh-docker-vm restic | ✅ With DB hooks for paperless-postgres (external), home-assistant + pgadmin + uptime-kuma (host-side sqlite3), calibre-web-automated (in-container sqlite3) |
| vm-esh-nas restic | ✅ Light — NFS mounts explicitly excluded |
| nh3-dev (workstation) restic | ✅ /home/lkraven + /etc with language-toolchain and build-output excludes |
| irv-ml1 restic | ✅ Cross-site to rest-server-nh3 via WireGuard |
| esh-vm-db restic | ✅ With pg_dumpall + mongodump pre-backup hooks |
| Cross-site redundancy | ✅ ana-nas → nh3-nas rsync at 04:00 daily; nh3-nas → ana-nas at 05:00 daily (configs/rsync/) |
| Prune ceremony | ✅ Quarterly manual ritual documented in docs/runbooks/nh3-prune-ritual.md (DSM-mediated --append-only toggle) |
| offen/docker-volume-backup sidecars on esh-docker-vm | ❌ Remove once restic proves itself (~1 week of clean runs) |
Authoritative vs. mirror
- Authoritative: files on each server under
/opt/docker/compose/<stack>/and/opt/docker/conf/<stack>/. - This workspace: source-of-truth copies under
stacks/<name>/(hand-curated), and a gitignored mirror understacks-mirror/pulled bysync-stacks.sh.
Edit in stacks/, push with deploy-stack.sh. Never commit stacks-mirror/ — it can contain embedded plaintext secrets from upstream compose files that haven't been audited yet.