vh
300ecc1276
Live on vllm-voices (fv-ml1 GPU0 :8027) beside voices-base, lv-yarros and lv-bronte.
Healthy 190 s after recreate, four models served, GPU0 96,092 -> 96,090 MiB. The adapter
was verified byte-identical to checkpoint-850 by sha256 across both transfer hops, and the
seat was verified by generating, not by reading its config: base emits 170 words of <think>
planning and never writes the passage, lv-hemingway writes the scene.
Gate design was pre-registered before any generation existed (0bb4938). Three arms, 60
held-out beats, 4 seeds, 240 generations per arm.
A. VOICE PASS 6.4x +0.413 delta_cb, pairwise floor 0.064 -- and it clears the OLD
all-arms floor (0.113) too, so this verdict does not lean on the
rule change. Closes 73.8% of the span between the unadapted
carrier and held-out Hemingway itself; lv-bronte closed 48%.
B. NOT COPIED see below
C. NO DAMAGE PASS ran-on +0.08, on-beat -0.14, both inside a 0.217 floor
AXIS B: THE NEGATIVE CONTROL WAS THE WRONG ONE, AND FIXING IT MADE THE RESULT WORSE, NOT
BETTER. memorization_check.py uses the base-unadapted arm as its control. Base writes
18,035 words of summary against the adapted arms' 27,413 of pastiche, and text that does
not imitate a register cannot collide with its n-grams -- so base's 0.00 measures "different
register", not "did not memorise". The comfortable reading was that Hemingway's plain
high-frequency prose makes collisions inevitable for any arm that learns it. That is
refutable, so it was tested: held-out Hemingway, the author himself, scored against the
train split at the generations' own median length.
HELD-OUT HEMINGWAY (never trained) 370 chunks 0.01 hit-rate mean-longest 0.1 max 10
base-unadapted 240 gens 0.00 0.0 0
ckpt850 (shipped) 240 gens 0.07 0.6 9
positive control (train vs train) 160
The hypothesis is false: the adapter reproduces train n-grams ~7x more often than the
author reproduces himself. That is real and is on the record. All 19 matched runs were then
READ rather than counted -- every one is stock dialogue ("came over and sat down at the
table", "how do you feel i feel very well"), capped at 9 words, with no plot, no imagery and
no proper noun; the one name-shaped hit is the RENAMED invented name. Nine is shorter than
the 10-word run unseen Hemingway shares with the train split by coincidence. Elevated rate,
zero protectable content. Hemingway is in copyright; lv-yarros is the in-line precedent,
also in copyright, shipped at 0.10 against a 0.07 control. Unload is 0.003 s.
The durable lesson is about the instrument: a negative control that differs from the
candidate in a way correlated with the metric is not a control. memorization_selfsim.py and
memorization_dump_matches.py are committed so the claim can be re-derived rather than taken
on faith.
SHIPPED ckpt850, NOT the loss minimum at step 1750. The two are indistinguishable on voice
-- 0.072 apart against a 0.113 pairwise floor -- so the pre-registered tiebreak fell to the
axes that resolve, and 850 wins all of them: 2.3x tighter seed spread (0.050 vs 0.113),
lower memorisation, less ran-on, half an epoch less overfit. ckpt1750's spread is one seed
(0.491, 0.449, 0.468, then 0.562), the same lone-outlier shape that lost ckpt925 the
lv-bronte tiebreak. The two-epoch recipe is now 0 for 2 and should stop being carried
forward; only the epoch-3 collapse is robust at 17.4x jitter.
servers/fv-ml1/ssh-target was a bare IP, so deploy-stack.sh connected as lkraven, could not
write the infra-ops-owned /opt/docker/compose, and could not escalate either because
lkraven's sudo on fv-ml1 wants a password. Now infra-ops@10.251.50.54; --validate-only stays
clean and the deploy works through the repo's own tool rather than around it. Other hosts
may carry the same gap -- a read-only refresh works as either user, so it only surfaces on a
deploy.
eshpfi-management
Infrastructure management workspace for the PFI fleet (plus the ESH home-lab host). Tracks server state, canonical Docker Compose stacks, per-host configs, and the tooling that moves them around.
See CLAUDE.md for the full set of conventions and the rules Claude Code sessions follow when working here.
The fleet
Docker hosts:
| Host | IP | Site | Role |
|---|---|---|---|
| fv-ml1 | 10.251.50.54 |
Fountain Valley (10.251.0.0/16) |
GPU / AI inference (bare metal, 4× RTX PRO 6000 Blackwell Max-Q) |
| ana-docker | 10.250.50.70 |
Anaheim | General-purpose Docker + cross-site hubs (VM on pfi-pve) |
| nh3-docker | 10.100.50.40 |
NH3 (10.100.0.0/16) |
General-purpose Docker (VM on nh3-pve) |
| esh-docker-vm | 10.0.50.45 |
ESH home lab (esteban.net) |
Home-lab Docker (VM on esh-pve, non-PFI scope) |
| vm-esh-nas | 10.0.50.154 |
ESH home lab | NAS-adjacent Docker, NFS-mounted shares (VM on esh-pve-nas, non-PFI scope) |
Proxmox hypervisors (tracked for inventory; not Docker targets):
| Host | IP | Site | Role |
|---|---|---|---|
| pfi-pve | 10.250.250.31 |
Anaheim | Proxmox VE (188 GB / Xeon Silver 4310) |
| nh3-pve | 10.100.250.60 |
NH3 | Proxmox VE (62 GB / i9-13900H) |
| esh-pve | 10.0.250.35 |
ESH home lab | Proxmox VE (62 GB / i9-13900H) |
| esh-pve-nas | 10.0.50.55 |
ESH home lab | Proxmox VE, storage-dedicated (125 GB / Xeon W-1250) |
Per-host snapshots of the running system live under servers/<host>/system-details.txt, refreshed via scripts/refresh-server-info.sh.
Layout
.
├── CLAUDE.md # conventions; loaded by Claude Code sessions
├── README.md # this file
├── scripts/ # workstation tooling
│ ├── server_inspect.sh # read-only diagnostic, runs on remote via stdin
│ ├── proxmox_inspect.sh # Proxmox-aware probe (VMs, LXCs, storage, backup coverage)
│ ├── refresh-server-info.sh # pull fresh system-details.txt for one/all hosts
│ ├── refresh-proxmox-info.sh # pull fresh proxmox-details.txt for one/all PVE nodes
│ ├── add-host.sh # register a new server (writes servers/<name>/ssh-target)
│ ├── sync-stacks.sh # pull /opt/docker/{compose,conf}/ → stacks-mirror/
│ ├── deploy-stack.sh # push stacks-mirror/<host>/<stack>/ with diff + prompt
│ ├── discover-fortigate.sh # DHCP lease list from a FortiGate via SSH
│ ├── discover-unifi.sh # client list from a UniFi Controller via REST
│ └── discover-gaps.sh # find IPs in discovery TSVs not tracked in servers/
├── servers/ # per-host notes + latest snapshot + ssh-target fallback
│ └── <host>/
│ ├── README.md
│ ├── system-details.txt # regenerate on demand
│ └── ssh-target # <ip> or <user>@<ip>, used when DNS fails
├── stacks/ # canonical compose files (source of truth)
│ └── <stack>/
│ ├── compose.yaml
│ ├── .env.example
│ └── README.md
├── stacks-mirror/ # gitignored — live mirror from sync-stacks.sh
├── configs/ # host-level config files that aren't docker-compose
│ ├── homepage/ # canonical config for the fleet dashboard (on esh-docker-vm)
│ └── restic/<host>/ # resticprofile configs + pre-backup hooks
└── docs/ # general reference (network, models, proxmox, etc.)
└── pfi/
Current stacks
GPU (fv-ml1):
llama-swap— GGUF model swapper via llama.cpp (port 9292)vllm— embeddings (8001) + reranker (8002) + Skywork reward classifier (8003) via vLLM
Anaheim non-GPU (ana-docker):
traefik,crowdsec,gitea,vaultwarden,synapse,seafile,searxng,openwebui,sillytavern,mailrise,rustdesk,dockge,it-tools- (
mattermostretired 2026-04-21 — compose dir may still linger, containers gone) - Notes / feeds:
miniflux(RSS, 8080),nevermore(twice-daily LLM-curated brief, 8181, multi-tenant — extracted to its own repo atvh/nevermore),memos(note server, 5230) - Assistant tooling:
task-board(MCP + dashboard for assistant task state, 7878) - Fleet services:
beszel(metrics hub, port 8090),dozzle-hub(log viewer, 8088),backrest(restic UI, 9898) - Backup target:
rest-server-anaon port 8000
GPU fv-ml1 (non-canonical for now):
comfyui,kokoro,parakeet,vibevoicealongside the canonicalllama-swap+vllm
NH3 (nh3-docker):
adguard,dockge, plus Beszel/Dozzle agents
NH3 (Synology 10.100.50.50):
rest-server-nh3— restic backup target (port 8000)
ESH home lab (esh-docker-vm):
adguard,homeassistant(macvlan),esphome,mosquitto,paperless-ngx,pgadmin,calibre-web-automated,drawio,traefik,homepage,uptime-kuma, plus Beszel/Dozzle agents
ESH home lab (vm-esh-nas):
filezilla(web UI on port 5800),dockge, plus Beszel/Dozzle agents. Mounts/mnt/{share,music,books,media}from the Debian NAS at 10.0.50.50.
Common tasks
Refresh one host's snapshot:
scripts/refresh-server-info.sh ana-docker
Refresh all hosts:
scripts/refresh-server-info.sh all
Refresh all Proxmox nodes (separate flow — captures VM/LXC/backup-coverage):
scripts/refresh-proxmox-info.sh all
Add a new host:
scripts/add-host.sh <name> <ip-or-user@ip>
scripts/refresh-server-info.sh <name>
Validate discovery (without hitting the network):
scripts/refresh-server-info.sh --validate-only all
Push a stack to a host (with diff + confirm):
scripts/deploy-stack.sh <host> <stack>
Pull every server's compose/conf trees into stacks-mirror/ (not committed — see .gitignore):
scripts/sync-stacks.sh all
Bootstrap a new fleet repo from this one:
scripts/fork-fleet.sh ~/development/<other-fleet>-management
# optional: override the fleet-name baked into the skeleton CLAUDE.md / README
scripts/fork-fleet.sh ~/development/<dest> <fleet-name>
Mirrors the reusable tooling (everything under scripts/, the
generic playbook templates, .gitignore, conventions section of
CLAUDE.md) into the destination dir, strips fleet-specific content
(servers/, stacks/, configs/, fleet-named playbooks
(deploy-*, decouple-*), docs/orientation.md, docs/runbooks/,
docs/pfi/, STATUS.md, host-pinned helper scripts), regenerates
skeleton CLAUDE.md / README.md / STATUS.md with the new fleet
name, and initializes a fresh git history with one "Initial commit".
The script does not create a gitea remote or push — namespace +
repo name are an explicit manual step. The "next steps" output prints
the exact tea repo create + git remote add + git push commands
to wire it up when ready.
Backup pipeline
Backups are driven by per-host resticprofile configs under configs/restic/<host>/, scheduled via systemd timers on each host:
- Writes: each host backs up to its site-local rest-server (
rest-server-anaorrest-server-nh3), over HTTP basic-auth. - Authentication: shared
.htpasswdfile on both rest-servers, one entry per host; credentials stored in/etc/restic/restic.envon each client host. - Encryption: per-host client-side passphrase in
/etc/restic/password(unique per repo; losing it = losing that host's backups). - Visibility: Backrest (
http://10.250.50.70:9898) shows every repo for browsing/restore. - Schedule: backup at 01:00 daily,
forgetat 03:00 daily, weeklycheck --read-data-subset 10%on Sundays. - Prune: manual ceremony (rest-server runs with
--append-only, which blocks destructive prune ops). - Off-site: cross-site rsync between the two rest-server data dirs is planned (not yet implemented).
Coverage status (as of 2026-04-29)
Goal: every Docker host + configs + every database covered, not just VM images.
| Layer | State |
|---|---|
| VM-level (Proxmox vzdump) | ✅ All running guests covered across pfi-pve / nh3-pve / esh-pve-nas; esh-pve has VMID 108 uncovered |
| ana-docker restic (host files + DBs) | ✅ configs/restic/ana-docker/ with pre-backup hooks for synapse / seafile / vaultwarden-pg / gitea (native dump) / openwebui |
| fv-ml1 restic | ✅ configs/restic/fv-ml1/ — bare-metal host files (no DB hooks needed) |
| nh3-docker restic | ✅ Light — no DB hooks needed |
| esh-docker-vm restic | ✅ With DB hooks for paperless-postgres (external), home-assistant + pgadmin + uptime-kuma (host-side sqlite3), calibre-web-automated (in-container sqlite3) |
| vm-esh-nas restic | ✅ Light — NFS mounts explicitly excluded |
| nh3-dev (workstation) restic | ✅ /home/lkraven + /etc with language-toolchain and build-output excludes |
| irv-ml1 restic | ✅ Cross-site to rest-server-nh3 via WireGuard |
| esh-vm-db restic | ✅ With pg_dumpall + mongodump pre-backup hooks |
| Cross-site redundancy | ✅ ana-nas → nh3-nas rsync at 04:00 daily; nh3-nas → ana-nas at 05:00 daily (configs/rsync/) |
| Prune ceremony | ✅ Quarterly manual ritual documented in docs/runbooks/nh3-prune-ritual.md (DSM-mediated --append-only toggle) |
| offen/docker-volume-backup sidecars on esh-docker-vm | ❌ Remove once restic proves itself (~1 week of clean runs) |
Authoritative vs. mirror
- Authoritative: files on each server under
/opt/docker/compose/<stack>/and/opt/docker/conf/<stack>/. - This workspace: source-of-truth copies under
stacks/<name>/(hand-curated), and a gitignored mirror understacks-mirror/pulled bysync-stacks.sh.
Edit in stacks/, push with deploy-stack.sh. Never commit stacks-mirror/ — it can contain embedded plaintext secrets from upstream compose files that haven't been audited yet.