32e3ed65e1df77062b5dacac493a520727c3911e
38
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
32e3ed65e1 |
fix(u6): fold the cold contract panel — the import selection gap, and a document arguing with itself
/heid-contract-review panel 01M35BWCJ806MT75NA630Y4WFH. The headline arrived from all four arms independently and it is a missing feature, not a wording problem. `bench import --apply` registered every candidate, while the same contract says roughly 14 of 35 are reference bookmarks that must stay on the board. There was no selection mechanism between the dry-run report and the write -- so the write path did the exact thing this unit's rationale calls impossible, tell a bench from a bookmark by its URL, silently, to rows that belong where they are. The report existed precisely because the decision is not mechanizable. `--apply` now takes the ids the operator names; a bare `--apply` is refused and an unknown id is refused, both writing nothing. Two solo findings, both real: - A successful registration could push the registry past the size its own reader refuses, so the LAST bench added would make every other bench invisible while reporting success. The writer now respects the reader's cap. - The credential ban covered bench URLs and not `booth link`, the door this unit did not touch -- and the board renders on an unauthenticated LAN surface. A password can no longer reach it through either door. A small deliberate widening, named rather than smuggled. Cap semantics were readable three ways (refuse / clip-for-display / truncate-and-store) with a different build behind each, 4-of-4. Now stated per field: name and owner truncate, url and state are refused at the write and are DAMAGE at the read. url is not a display budget -- INV-7 promises the click goes to the posted address byte for byte, and a clipped URL keeps that promise in the type system while breaking it in the browser. The code had been clipping it; fixed. Two passages disagreed about one character: INV-7's specimen named "a trailing slash on a non-empty path" as something normalization changes, while the rule list keeps it and INV-6 makes the two spellings two benches. The rule list is right; the specimen was wrong. Found by 3-of-4. Also: INV-6's component list was illustrative where it had to be exhaustive and was short scheme and port; "writes nothing" appeared twice with different lists; the dead marker's predicate was readable two ways with 221 rows riding on it; and INV-2's falsifier read as though three callers agreeing pinned something, when three callers of one wrong predicate agree perfectly -- the table's expected values are the real check and now say so. 597 -> 604 tests. |
||
|
|
8a7af3eb08 |
fix(u6): fold the cold code-review panel — four-arm convergence on three surface clauses
/heid-code-review panel 01M35CK8YKEKMV7T15JXEF6A8N, verdict NOT drift-zero. Three findings arrived from all four arms independently, and they share a shape: a contract clause written as prose and never converted into an assertion. That is the lens working. - The panel dropped the added date the contract promised to show. - `bench ls` printed no ids, and the URL it printed was truncated to 52 columns so the line was not pasteable into `bench state|rm`. The test's docstring claimed it printed ids and asserted nothing of the kind. - `bench import` printed the description instead of the raw URL beside each normalized id, hiding the collapse the clause exists to expose. - An IPv6 literal lost its brackets: http://[::1]:8080/a normalized to http://::1:8080/a, a broken identity that no re-post can match. Bracketed literals are re-wrapped; an unbracketed one is refused rather than guessed. - A deeply-nested JSON RecursionError escaped read_benches' except pair. The byte cap does not help -- 200k open brackets is 200 KB. - An empty board hid the whole benches panel, registration form included. - The link refusal classified by captured-text emptiness, which bash can erase; it now answers with a B:/N sentinel so no name reads as "not a booth". INV-4's tie-break falsifier could not fail: _write_all serializes with sort_keys=True, so both insertion orders came back already id-sorted and removing the tie-break left the test green. It now calls order_benches directly. Same class as the five vacuous U4 falsifiers, found by a cold reader rather than by us. Also from the arms' per-invariant vacuity pass: INV-6 had no vector pinning a non-default port as part of the identity; INV-3 asserted only that links/ was absent; INV-8's hashed sequence omitted a read verb; INV-9's AST walk is defeated by a string import. All closed. Contract amended where the code was right: `updated` means last mutation, the id cap is write-only because the id is the locator controls post back, INV-8's file list includes the lock sidecar it always mandated. Every line number is out of the prose -- the panel found two already stale. 565 -> 593 tests. Nothing declined. |
||
|
|
0a2bb1d26c |
fix(u6): the booth check fails closed with a reason, and a dead write leaves no scratch
Two more from the in-session adversarial pass. `booth link`'s new booth-URL check shells out to booth/links.py. When that import cannot run, the command substitution under `set -e` aborted the script with a bare ModuleNotFoundError traceback: the right DIRECTION (no row was appended — a guard that fails open is not a guard) reached by accident, and unactionable when it fires. Handled explicitly now: exit 3, and a message naming what the check needs. The fail-closed direction is stated rather than inherited from shell semantics, and a test pins it — the defeating change in either direction goes red. _write_all's scratch file was stranded beside the registry if the write died between create and replace. Cleaned up on every exit path. The prior registry was never at risk either way: os.replace is the only thing that publishes. Also pins normalization idempotence, which `bench state <id|url>` and `bench rm <id|url>` both rely on: they normalize whatever they are handed, so an id that did not normalize to itself would miss the row it names. |
||
|
|
8c7f2127eb |
fix(u6): a FIFO at the registry path hung the render, and unquote leaked control characters
Both found by the in-session adversarial pass while the cold panels were still out. The first is this repo's own 2026-09-22 lesson recurring in a new file. _read_bytes bounded the READ and its docstring claimed that closed the named-pipe hole. It does not: open() blocks on a FIFO with no writer, before any byte cap can apply. read_benches runs on the board page's render path, so one FIFO there is a request that never returns and, with enough hits, the threadpool behind every route. Guarded with S_ISREG before the open, which is what marks.py has done since it learned the same thing. The bounded read stays for the case a stat cannot answer: a regular file that grew between the two. booth_target handed back whatever unquote produced, including NUL and newline. Neither can name a directory, and unfiltered they reach is_dir() -- which raises ValueError on an embedded NUL, and ValueError is not an OSError, so it escapes the dead marker's guard -- plus the refusal message the CLI prints and the marker the board renders. Both tests are written to go red under the exact change that defeats them: the FIFO test blocks rather than fails if the regular-file check is removed, and the control-character rows need their own case because %2e%2e and %2f stay green without the clause. |
||
|
|
1c3ce5ddb5 |
feat(u6): benches — a registry with identity, and the rule enforced
The standing link board carried three jobs because only one of them had a surface. Re-measured before contracting, its 221 rows split into 178 booth announcements (156 already dead) and 43 non-booth rows, of which 8 are the same bench re-posted. U5 gave the booth announcement a home; this gives the running service one, and refuses the one shape that now has somewhere better to go. - booth/benches.py (new, stdlib-only and sibling-free): the Bench record, URL normalization as the identity, a lenient read on the render path and a strict read on the write path, atomic replace under an flock, and a stated total order (state rank, name casefolded, id). - links.booth_target: ONE predicate for "is this a booth URL", consumed by the CLI refusal, the board's dead marker and bench import. Host-agnostic, path-shaped, percent-decoded, never raises. - booth link refuses a booth URL, names `booth new --why`, and writes nothing — not the row, not the board directory, not the announcement. - The board marks rows whose booth has been swept. Nothing here deletes a row: removal stays the operator's two clicks through the existing bulk control. - booth bench add|ls|state|rm|import. import writes nothing without --apply and never edits links.md. - docs/archive/links-2026-09-22.md: the board archived verbatim into git. Identity is the FULL normalized URL, not the origin, and that was measured: origin identity collapses the 43 non-booth rows to 19 groups by merging eight distinct gitea repositories into one row, three unrelated HuggingFace model cards into one, and the two LRPG surfaces on 10.100.10.50:8321 — the design doc's own example of two real benches — into one. Full-URL identity still collapses both cases that doc names: talk 5 to 1, Peedlar 3 to 1. booth link is NOT deprecated. Roughly 14 of the 35 distinct non-booth targets are reference bookmarks for which the board is the right and only home; the design doc's plan to deprecate it would have evicted a third of its live content. Corrected there, along with what "normalized URL" means. The seam review found three real defects in the contract before any code: the claim that test_stdlib_only already forbids sibling imports (it exempts `booth` on purpose), naming resolve_booth as the dead marker's existence check (it raises HTTPException(404), so one swept booth would have 404'd the whole board page), and silence on percent-encoding (booth links are emitted through quote(name, safe=""), so a raw comparison marks every encoded booth dead forever). That both list_booths and sweep_once skip the registry was verified against the real functions rather than assumed. 444 -> 555 tests. Deployed and verified live: 23/23 booths 200, and the board renders 156 dead of 221 rows, matching an independent pre-implementation count. NOT TAGGED: both cold gates are in flight (contract review 01M35BWCJ806MT75NA630Y4WFH, code review 01M35CK8YKEKMV7T15JXEF6A8N) and the bug-hunt has not run. Per the v0.2.0 lesson, the tag waits for the gates. |
||
|
|
5c20e2f4d5 |
fix(u3): seven defects two cold panels found in the declared seam
The /heid-code-review and /heid-bug-hunt panels, artifact-only over the U3
diff, between them found four real defects and three vacuous falsifiers. Both
snapshots predate the contract-review fixes, so two of their findings were
already closed; the rest are here.
Prototype pollution in the placement maps. A mark id and a question key are
both [A-Za-z0-9][A-Za-z0-9._-]*, so `toString` and `constructor` are legal in
each. Against a plain `{}` an anchor naming NO mark returned an inherited
function, passed the guard meant to reject it, and threw on .questions.length
-- aborting placement before the tail, so one typo in author markup cost the
page every ask. The `placed` set had the mirror bug: inherited
`got.constructor` read as already-placed and silently dropped a question.
Object.create(null), three times. Found independently by both panels.
A declaring page was not served as written. read_text() opens in
universal-newline mode, so a CRLF report came back LF, and errors="replace"
replaced every byte that was not valid UTF-8. That is this unit's headline
promise, broken by the read itself, and the test could not see it because its
fixture was LF-only ASCII. The verbatim branch reads and serves bytes now; the
decoded copy answers only "does it declare the seam?".
A submit anchor inside the author's own <form> lost ours -- the parser drops a
nested form element outright -- while the code still recorded the pick as
submitted, so no fallback was appended. Every control's form= pointed at
nothing and the button did nothing. It counts as submitted only if the form
survived.
A broken pick's diagnostic never rendered from a submit-only anchor: an errored
pick's submit block is empty, and mounting that then marking it placed made the
tail skip the "broken ask" box entirely. The anchor is left alone instead.
An author's own element could hijack the open-ask chip -- id="bk-ask-winner-
background" satisfies any prefix rule, hyphen boundary included. The chip now
searches only elements this script mounted, which is the identity the deleted
bk-ask-<id>-top anchor used to guarantee, and takes the earliest by
compareDocumentPosition.
No error boundary around fragment rendering. A .marks.json that is well-formed
JSON with a wrong-shaped answer hydrates with no error and then raises in the
macro; this endpoint renders every pick on every load of the report, so that
was the whole seam gone while hold_read called the file readable. Reproduced
before building for it. _safe_fragments gives it the per-mark leniency
_hydrate_safe already applies one layer down.
The gallery and marks pages still 500 on that same entry. Measured at
|
||
|
|
87e2c5364c |
feat(u3): a verbatim report declares the seam, the Booth mounts into it
A booth that ships its own index.html was served through ten regular
expressions applied to markup the Booth did not write: six in
wrap_verbatim_html hunting for somewhere to hang a favicon and a chip, four
in booth/inline.py substituting rendered ask markup into the author's own
tags. Both worked. Both were the most fragile thing in the service, on the
path the operator uses most.
The whole class is replaced by a declared seam. A report carries one line —
<script src="/_booth/embed.js" defer></script> — and the chrome mounts
through DOM APIs. What the server does to author HTML is now, in full:
return html if declares_embed(html) else html + EMBED_SCRIPT_TAG
Two substring tests and a concatenation. Both of the old wrapper's hard
constraints stop existing rather than being satisfied more carefully:
nothing can displace a leading doctype into quirks mode and nothing can push
the charset meta out of its detection window, because nothing in front of
them ever moves. A page that declares the seam is served exactly as written.
Fragments are still rendered by the _ask_inline.html macros and handed over
GET /b/<name>/embed.json; embed.js places them and decides nothing. Openness
comes from open_marks, order from (created, id), questions in declaration
order. A single-question pick normalizes to key None, so the payload carries
questions as a list rather than an object — keying by name would serialize
that as the string "null".
Placement is an anchor fill, not a replacement: el.insertAdjacentHTML(
'beforeend'), so an author's wrapper and its contents survive. The regex it
replaces was eating the opening tag of dfa-concepts' styled .ask blocks and
orphaning their headings, live, unreported.
data-booth-mark is canonical; data-booth-ask stays a kept alias because two
live reports use it. The comment placeholders are dropped — no users.
Declared cost: the verbatim path now needs JavaScript. The never-invisible
guarantee holds through the index badge and /b/<name>/marks, both of which
render server-side.
Deleted: booth/inline.py entire, wrap_verbatim_html and its six patterns,
_BACK_CHIP, asks_chip, inject_asks, FAVICON_LINK, the styles() macro.
Tests 410 -> 434. tests/test_embed_browser.py drives a real Chromium: the
placement algorithm and the form= binding of a scattered multi-question form
cannot be observed any other way, and that binding was measured rather than
assumed (N=3 per condition, with a form-first positive control and a
points-at-nothing negative control).
Contract: docs/contracts/u3_declared_embed_seam.contract.md, with the
in-session seam review and the cold contract panel both recorded. Two of the
panel's findings were code fixes: a vacuous INV-3 falsifier that a renamed
regex walked straight through, and a bare-substring seam detection that read
a report merely quoting the path as declaring it and silently served it with
no chrome.
|
||
|
|
c75d7a2797 |
fix: four defects the U4 bug-hunt panel found in code it did not add
All four pre-date U4 and sit in files it touched, which is why a diff-scoped robustness lens saw them. They are separated from the unit's own commit so the feature history stays readable; the release tags both. * A booth name reached a JS string context. The confirm dialogs interpolated the name into a string literal inside `onsubmit`. Jinja's autoescape is HTML-attribute escaping, not JS-string escaping: the browser decodes the entity back to a quote before the JS parser sees it, so a name crafted to close the string executed on submit. Booth names are agent-authored — making a folder under the data dir is the whole API — so this was a live path, not a theoretical one. The name now travels as a data attribute to a delegated handler, where escaping is escaping. * An unreadable `links.md` returned 500 for the whole booth page. `is_file()` then an unguarded `read_text()`. The board is one tile on that page, and a page that will not load is worse than one missing a tile — the posture `read_blurred`, `marks_for` and `read_manifest` already take. * The index order had no tie-breaker, which violates the deterministic-order invariant. Equal-mtime booths fell back to whatever `iterdir()` yielded, and two booths landed by one `rsync` batch share an mtime exactly. Now `(mtime, name)` reverse: newest first, then name. The operator refers to cards positionally, so a sequence that moves between renders misfiles his judgment rather than crashing. * `/b/<n>/marks.json` reported damage as empty success. `booth marks` exits 3 on an unreadable file precisely so a caller can tell "not yet" from "broken"; the HTTP mirror — the only reader a remote session has — returned the same empty list for both. It now carries `error` and `detail`. The status stays 200 deliberately: reads are lenient here, and a pinned status code is a promise to remote clients this fix has no business breaking. Each has a regression test. 410 tests. |
||
|
|
c3a97c1b64 |
feat(u4): a booth's lifetime is derived from its state, not from a boolean
`.forever` was the only way to say three different things — "this is durable",
"I have not answered yet", "I am still looking" — and the census said it was
carrying all three: 17 of 24 live booths (70%, up from 54% the day before).
Three of the four booths in the fleet awaiting an answer had been pinned by
hand as well, and 10 of the 17 were younger than the TTL, so the sentinel had
bought them nothing and was pressed pre-emptively.
Only the first meaning is what `keep` means. The other two are facts the
service already held and did not consult.
KEPT `.forever` present never swept (unchanged)
HELD an open pick, or marks we cannot read never swept (new)
EPHEMERAL everything else 24h (unchanged)
Viewing is activity: a deliberately-served response from a booth's own page
route writes `.viewed`, which is a dotfile and not a `.lock` dotfile, so
`_newest_mtime` already counts it. There is no new arithmetic — `booth_age_seconds`,
`is_expired` and `expires_in` are unchanged. Machine reads are excluded on
purpose: an agent must not be able to hold its own booth open by polling for
the answer it is waiting on.
The hold is unbounded, and what makes that safe is visibility plus two exits
that already existed. Every surface whose chrome the Booth owns says
`held until answered` where the countdown was, and `booth rm` / the UI x /
`DELETE /b/<n>` take a held booth exactly as they take a kept one. A hold is
protection from the timer, never from the operator.
Three cross-frontier panels ran and each found a class the others could not:
* the paraphrase panel found that two reads of one file are not one read of
one state — the contract's `is_held(marks_for(c), read_error(c))` could
resolve to `([], None)`, the pair that deletes. `hold_read` is one read.
* the code-review panel found, 4-of-4, that the booth header's board branch
rendered no lifetime at all; and that five of seven invariant tests passed
under the change that defeats them.
* the bug-hunt panel found four more paths where a failed read still
authorized a delete, and a `record_view` that followed a planted symlink.
`is_held` became `hold_reason`, which returns the reason rather than a bool
beside a string that can disagree with it.
Prediction, to re-count on or after 2026-10-06: the `.forever` rate falls to
the booths that are genuinely durable references. Only 4 booths carry marks at
all, so this rests on both halves of the unit; a null result cannot distinguish
a wrong diagnosis from a habit that outlived its need.
406 tests (341 before). Contract: docs/contracts/u4_derived_lifetime.contract.md
|
||
|
|
95beede3c3 |
fix(manifest)!: the size cap opened a service-wide hang; close it
The diff-scoped bug-hunt panel, four arms, artifact-only. Its strongest finding is one I created two hours earlier while hardening the reader. `stat` reports size 0 for a FIFO and 0 for a symlink to /dev/zero, so both sail under the byte cap added for the RecursionError round — and then `read_text` either blocks in read() with no EOF, so the except never runs, or allocates until the kernel intervenes. `list_booths` reads every booth on every GET / and /healthz, so ONE such file stalls the front page for the whole service, with no error and no recovery short of a restart. Reproduced before believing it (timeout returned 124). S_ISREG is checked BEFORE the size in both modules now; verified against the live service with two FIFOs planted, which answered 200 in 36ms. The shape worth carrying: st_size answers a different question than "can this be read", and a bound that trusts it inherits everything it does not mean. A hardening fix opened a worse hole than the one it closed. THE UPLOAD PATH WROTE ABOVE ITS OWN CLEANUP GUARD (4/4) A failed manifest write orphaned a .uploaded half-booth with no files in it — and because the temp name now carries a random suffix, nothing ever overwrote the leak, and .booth.json.<hex>.tmp is not a .lock, so _newest_mtime counted it and kept that empty booth past every sweep. The uniqueness fix from the previous round is what made the leak permanent. Both writes moved inside the guard; the temp is removed on every exit path. DAMAGED BYTES ARE KEPT, NOT REPLACED (4/4, INV-6) Marks made this explicit in v0.2.1 and this write path contradicted it: a manifest that failed on ONE field lost the others with it, including a why the re-announcer may never have kept anywhere. It diverges from marks in HOW it honours the rule — marks refuse and answer 409 because the operator's judgment is not restatable; a manifest quarantines and proceeds, because refusing would fail `booth add` and lose the files it was copying. ONE OPENNESS PREDICATE, AS U2 SAID (2/4) `booth answer` spelled out `if m.answer is None` while `booth marks` asked `open_marks`, so a partially-answered pick read as done to one verb and open to the other — at the same instant, on the same booth. U2's INV-2 put openness in one function precisely so they could not drift. The mirror case is fixed too: a pick that hydrates broken is refused by the web route, so `answer --wait` polled an hour on a form nothing could ever land. ALSO - now_stamp was whole-second while the importer had moved to microseconds, and '-' sorts before '.', so a later mark came out ahead of an earlier import inside the same second. One format; the previous round's ordering fix had opened this one. - `_broken` was the third of three directory-name fallbacks and the one still handing a raw name into a card's sub-line. - An identical re-announce rewrote the file and reset the TTL. `booth link` does this on every post to the standing board. - The importer's return went through the bare _hydrate, not _hydrate_safe. - A marks document could be written larger than it can be read back, and then read as no marks at all. Refused at the write instead. - `choice` reached the answer builder raw while `notes` beside it did not. AND ONE FINDING DELIBERATELY NOT FULLY CLOSED The mtime-restore race is real. The clean fix — ignore a booth directory's own mtime whenever the booth holds anything — also silently retires the documented rule that releasing a kept board resets its clock, which the CLI header, the README and a deliberately-written test all pin. That is a TTL doctrine change, not a bug fix, and an existing test caught the attempt. The concrete half is fixed (a failing os.utime escaped and 500'd the route); the race is stated in the code where the next reader will meet it. 341 tests. Live service restarted, 24/24 booth pages verified. |
||
|
|
c015a917ee |
fix(manifest): fold in both cross-frontier panels — and a live hole in v0.2.2
Two four-arm artifact-only rounds landed together: the contract paraphrase (against the pre-seam-review capture) and the code-vs-contract conformance review (against the amended one), correctly firewalled from each other. The conformance round found ZERO drift in the strict sense — the code is a clause-for-clause implementation of the contract — and the weight of both rounds landed one layer down, in what green tests structurally cannot report. Full triage in persistent-memory.d/. A LIVE HOLE IN RELEASED CODE, FOUND ON THE SIBLING MODULE v0.2.2 adopted the RecursionError finding from the bug-hunt round and closed half of it: `_hydrate_safe` guards hydration, but `json.loads` runs above it in `_read_raw`, whose catch list covers neither RecursionError nor MemoryError. A 400 KB file of nothing but brackets in any ONE booth therefore still returned 500 for `/` and `/healthz` across every booth on the service. Confirmed by running it before believing it. Both modules now bound the read by `stat` before touching the bytes and catch both classes anyway, so raising a bound later cannot quietly re-open the hole. The strict half of the marks asymmetry refuses everything the lenient half tolerates, or a file that reads as "no marks" gets replaced by a write that believed it. THE WHY-WIPE `booth new x --why "..."` then `booth add x out/*.png` erased the sentence the first command existed to record. Omitted flags meant empty strings and empty strings overwrote. Two arms predicted it from the contract's wording alone; every test here passed --why on both calls and so could not see it. Omitted now means unchanged and an explicit --why "" still clears — the shell carries the distinction by leaving the variable UNSET, not empty. --title WAS WRITE-ONLY Stored, flag-surfaced, rendered nowhere. 4/4, and independently top-ranked by every arm of the paraphrase round. It lands on the booth page heading with the directory name beside it, because the directory name is the identity the operator navigates by and refers to positionally. THREE TESTS THAT COULD NOT FAIL - test_the_write_is_atomic asserted no *.tmp survived, which a plain write_text passes. It asserts the inode changes now. (The first replacement was ALSO vacuous — it spied on os.open, which Path.write_text reaches through io.open in C and never touches. Recorded in the test, because writing a second vacuous test while fixing the first is exactly the failure this round is about.) - The INV-3 preservation test passed against an implementation that regenerated `created` every time, because _now() is whole-second resolution and back-to-back writes share a stamp. Seeded from 2019 now. - test_announcing_is_activity passed whether or not _newest_mtime counted the manifest, because writing it bumps the directory mtime either way. The directory's clock is put back, leaving the file as the only thing that can keep the booth alive. ALSO - The title fallback skipped the normalizer the explicit value gets; a directory name may legally carry a newline and run to 255 bytes. - Every writer derived the same .booth.json.tmp. Marks are protected from that by their flock; the manifest has none, so uniqueness stands in. - test_stdlib_only was blind to relative imports in all four modules. - INV-1 had no guard at all; INV-5 named two different promises; the negative render states were asserted on the index only. Contract amended throughout: the 4 GB case is a stat-checked bound rather than a return constraint, every field of an error-carrying record has a stated value, INV-1 no longer contradicts INV-3, repo-wide rules are named in words instead of by a colliding number, and touches admits the macro partial the implementation added. 329 tests. |
||
|
|
aa61fcf5fd |
test(probe): teach the layout probe about <details>, and guard the flag parser
THE PROBE. A control inside a CLOSED <details> is laid out but sits outside its collapsed parent's box, so elementFromPoint at its centre returns an ancestor and it reports OCCLUDED — 23 of them on sindra-set, every one a false positive. Verified both ways before believing it: closed, elementFromPoint returns div.gallery; opened, the button itself, and a real trial click lands on it. Opening every <details> rather than skipping them is the deliberate choice. Skipping would make the probe quiet by declaring put-away controls out of scope, and the add-note button inside details.item-addnote is exactly the class of control this instrument exists to check. Fourth false-positive class this probe has grown a guard for; the other three are already in its header. THE FLAG PARSER. Three cases that silently break and are cheap to pin: the flags on either side of the glob (a session should not have to remember which), a why carrying quotes, an em-dash, a newline and non-ASCII, and --why with no value after it, which must produce usage rather than eating the booth name and creating a booth called nothing. 313 tests. |
||
|
|
a48ef83ef5 |
feat(manifest): U5 — booths that say who posted them and why
The index card showed a name, an item count and a countdown, and nothing
the poster chose. An agent with something to show therefore had no way to
make the booth say "look at this" and posted a URL to the link board
instead — which is why 145 of that board's 210 rows (69%) ended up
pointing at booths that had already been swept. The board was absorbing a
job it was never shaped for. This is the shape.
Each booth carries `.booth.json` — {handle, title, why, created} — written
by the CLI from $ALTHING_HANDLE, and the provenance line renders on both
index lanes and on the booth page header.
WHAT IS WHERE
- booth/manifest.py, stdlib-only and importing nothing from booth.* either:
scripts/booth imports it under the system python3 with no venv, and a
cross-import between two stdlib-only modules is a second way for that
invariant to break. It joins the shared test_stdlib_only list and keeps
a stricter copy of its own.
- The read is lenient and cannot raise. list_booths touches every booth on
every index load, so a manifest that cannot be parsed costs that booth's
provenance and nothing else. That is the v0.2.2 lesson applied before the
same mistake rather than after it.
- Absent and damaged render differently — `unannounced` and `unreadable`.
Folding "cannot be read" into "never said" would hide the one case
somebody has to go and fix.
- Re-announcing preserves `created`. A second `booth add` sharpening the
why is not a second appearance of the booth.
- The write is atomic (invariant 5); the temp file is itself a dotfile, so
no listing can see it mid-write.
THREE OPERATOR CALLS, 2026-09-22
Flags on the existing new/add verbs rather than a separate `announce` verb
(a second step is the step that gets forgotten, which is the rot's own
mechanism). Unannounced booths get a quiet marker rather than nothing — the
convention is only adoptable if the gap is visible. U5 adds provenance only
and does NOT add a second index ordering keyed on announcement time; that
is a different surface needing its own stated rule, parked for v1.1.
NO EXEMPTION LIST
A pickup booth and the standing link board are created by the service, so
they announce themselves with handle `booth`, which is true rather than
manufactured. One rule — a booth with no manifest is unannounced — instead
of a growing set of special cases.
ALSO
tests/test_booth.py's keep/release assertion was slicing the page on the
bare word `boothhead`, which has lived in the stylesheet far longer than
the assertion has; it was reading CSS and passing on luck, and went red the
first time a new rule landed above the old one. Same assertion, aimed at
the markup. A U5 test had the mirror-image bug: pytest derives tmp_path
from the test name and the index renders data_dir, so a test named
`test_an_unannounced_booth_says_so` put the needle in the haystack itself
and passed against a template that did not yet exist.
310 tests (304 before this unit's CLI half). Live service restarted, 26/26
booth pages verified 200, end-to-end smoke through the real CLI.
NOT TAGGED. The cold contract-review panel is still in flight and the
code-review and bug-hunt gates have not run. Tagging with a gate
outstanding is what made v0.2.0 premature.
|
||
|
|
026a1fc392 |
fix(marks): v0.2.2 — nine findings from the cross-frontier bug-hunt panel
`/heid-bug-hunt` on U2's diff, four arms, artifact-only. Eight findings were real against live code; a ninth was already closed by v0.2.1 and is recorded as declined. Full triage in persistent-memory.d/2026-09-22-bug-hunt-panel.md. THE LOCK LIFECYCLE (4/4 convergent, and two defects in one place) `_Locked.__exit__` unlinked `.marks.lock` on the no-op path so a booth that had never been marked was left exactly as it was found. `flock` binds to an INODE: unlinking it under a blocked waiter leaves that waiter holding an exclusive lock on a deleted file while the next writer creates a fresh lock and takes it immediately. Two processes then run the read-modify-write concurrently, the later os.replace drops the earlier one's mark, and both obeyed the protocol. The cleanup existed to protect the booth's TTL, and was failing at that too: creating or removing a directory entry bumps the DIRECTORY's mtime, which is what `_newest_mtime` seeds from. The guard's comment reasons about the lock file's own mtime and misses that the directory moved underneath it. One fix: never unlink the lock, exempt `.<name>.lock` dotfiles from `_newest_mtime`, and restore the directory's mtime after creating one. THE READ PATH'S BLAST RADIUS `_clean_text` did `(text or "").replace(...)` and `marks_for` sorts on `(created, id)`, so a stored `text` that was a dict or a `created` that was a number raised out of the read path. `list_booths` reads every booth's marks on every index load, so one hand-edited file returned 500 for `/` and `/healthz` across all 25 booths. Guarded in two layers — a named type check and a `_hydrate_safe` backstop that cannot raise — and an unreadable mark now renders as ⚠ broken rather than as an empty note. ALSO - import_legacy_asks stamped `created` at whole-second resolution, so two sidecars from the same second lost the ordering the importer had just established and re-sorted alphabetically. Microseconds, per the stated `(mtime, name)` rule. - The five mark-write routes ran a blocking flock on the event loop; they now dispatch through run_in_threadpool, asserted structurally like INV-1. - `/answer` 500'd on a non-string `notes` form value where `/note` handled it. - The inline-doc tile had a flag control and no note field. - The marks panel was suppressed on any booth carrying a links.md. - The viewer's arrow keys and Escape threw away a note being typed. CLI `booth marks` printed a traceback and exited 0 on a failed read, and `--wait` emitted a whole JSON document per poll. `booth answer --wait` read a damaged file as "not yet" and spun the full hour. Both now use real exit codes — 0 ok, 1 unanswered/timed-out, 2 no such pick, 3 unreadable — and `--wait` prints once. `marks.read_error()` lets the CLI ask what the page must not: the browser stays lenient, the machine consumer gets the truth. `scripts/booth` had no tests; it has five now, run against the real script under the system python3, which also makes them a live check on INV-1. 275 tests (253 before). Live service restarted, 25/25 booth pages verified 200. |
||
|
|
5e41108cd3 |
fix(marks): a write over a damaged mark file was wiping the booth's judgment
Three defects and a missing test, all surfaced by the cross-frontier contract panel dispatched before implementation and triaged after it (heid, four arms, artifact-only, thread 01M33VSNFER4N1554G0Y0VC9C8). v0.2.0 was already tagged and announced to fifteen handles when they landed, which is the argument for running the gate at all. DATA LOSS. `marks_for` is deliberately lenient — an unparseable `.marks.json` reads as "no marks" so a review page still loads. The write path inherited that leniency through the same reader, so one flag click appended a single entry to an empty list and atomically replaced the file: every mark in the booth gone, silently, from a click. Reproduced first, then fixed. The fix is an asymmetry, not a retreat from leniency. Reads stay lenient; writes go strict through `_read_raw_strict`, which distinguishes bytes-present-but- unreadable from absent and valid-but-empty, and raises `MarksCorrupt`. The damaged bytes are left on disk. Routes answer 409 rather than 500 — the service is fine and the request was well-formed, the state on disk is not — and the body says what to do, because the alternative the operator reaches for otherwise is deleting the file, which is the thing being protected. The CLI says it in one line instead of a traceback. A PICK COULD NOT TARGET AN ITEM. `Mark.target` carried one, `marks_for_target` retrieved by it, and the panel already rendered "on <item>" — but `declare_pick` had no parameter for it, so no session could produce one. A question about one artifact is the whole point of the 2026-09-09 inline-placement ruling; the door was simply missing. THE IMPORTER STRANDED AN ANSWER. A stem already present as a mark was skipped wholesale. If a session had re-declared that stem through marks while the operator's choice sat in the legacy sidecar, that choice was lost permanently — reads are forbidden from looking at sidecars. The declaration is still skipped (idempotence holds) but a legacy answer is now adopted when the existing mark is an unanswered pick, and an answer made through marks is never overwritten. INV-3 NAMED A SURFACE NOTHING TESTED. All four arms converged on it: the rule protects gallery tile, zoom view and doc view; the falsifiable check covered one. The doc view was implemented and untested, so shipping it unmarked would have passed. Three tests now, one per surface. The contract carries the full triage, including two findings accepted and NOT closed: INV-2's and INV-5's checks comply in letter — openness can be re-derived without spelling the grepped pattern, and importlib inside a function defeats the AST walk. Both describe a future careless change, and the honest statement is that these checks raise the cost of drifting rather than making it impossible. Recorded rather than papered over. Also pins the three prose ambiguities the panel found, normatively and once each: what counts as open, the three distinct broken-declaration cases, and INV-6, which had named a helper that does not exist and forbidden the calls that helper must make. 253 tests. |
||
|
|
bb1e3cfcd7 |
fix(booth): templates were hot-reloading into a live service running older Python
19 of 25 live booths returned 500 with `UndefinedError: 'item_marks' is undefined`. Neither the old code nor the new code was broken — the service was running both at once. `booth.service` sets WorkingDirectory to this repo, so the repo IS the deployment root: no build step, no staging copy, the live service imports these files. Python is read once when the process starts. Jinja's FileSystemLoader re-reads a template on EVERY render. So the two halves of the service had different staleness rules, and editing booth.html deployed it instantly against Python from 22:03 that had never heard of the context the new markup wanted. The failure mode is worth naming precisely, because it is invisible to the suite by construction: the skew exists between a running process and the disk underneath it, so every test can pass against a tree that is simultaneously serving 500s. No amount of green catches this. The operator found it. Fixed at the source rather than with a reminder to restart. The template Environment is built here with auto_reload=False, so templates are cached at startup exactly like the Python, and there is ONE rule: nothing takes effect until you restart. The price is that template work needs a restart to see — that price is the entire point, and it is cheaper than a page of 500s while someone is reviewing. Building the Environment by hand means autoescape no longer comes from the Jinja2Templates constructor, so it is explicit and load-bearing: booth names, item names and mark text are all agent- or operator-authored strings that land in HTML. Verified escaped, not merely configured. Two tests hold the line — one on the snapshot property, one on the `dur` filter that is no longer incidental to the constructor. The environment is reachable at app.state.templates because a promise about the deployed service needs an assertion, and an assertion needs the env the app actually renders with. Also records the foot-gun in CLAUDE.md and persistent-memory: anyone editing this repo while the operator may be using the service is editing production. 244 tests. No version bump — the release tier for U2 is still the operator's call, and this rides with it. |
||
|
|
c7f9437a64 |
feat(marks): one primitive for operator judgment, so the loop stops running through chat
Five mechanisms existed to get one question next to one artifact. Three of
them were the same thing wearing different clothes, and the third of the three
had no code at all: the operator picked winners out of a 270-image set and
told the session in conversation. `sindra-finalists` is 86 items, every one
captioned, with the selection encoded in the booth's NAME.
A MARK is operator judgment attached to a target — the booth, or one item in
it, addressed by the `rel` U1 established as item identity. Three shapes:
pick — one of N options a session declared in advance (was: an ask)
note — free text the operator volunteered (had nothing)
flag — this one (had nothing)
One file per booth, one read path, one place openness is computed, one slot
beside the artifact. The storage shape is the operator's call (2026-09-21) and
follows from U4: "does this booth still owe an answer?" gets asked per booth
per sweep tick and per card per index render, so it has to be one read and not
a walk of a booth holding 270 files. Marks are also not links.md — that is an
O_APPEND content-hash log because 17 handles write it concurrently, whereas a
booth's marks see one session and one operator, so locking the common path
costs nothing.
The 2026-09-09 pick semantics are preserved by NOT rewriting them: partial
answers legal, a blank question lands in `unanswered`, `complete` false until
every question has a pick, the only refusal a submission carrying nothing.
`write_answer` split into the pure `build_answer` plus the storage that went
away with the sidecar; `normalize_ask` untouched.
Three findings worth naming, because each was caught by a gate rather than by
reading the diff again:
* The seam review found `inline.place` indexes asks by SUBSCRIPT — the only
consumer in the service that does — so a frozen dataclass breaks it, and
`inline.py` had been missing from the contract's scope entirely.
* A retargeted test found a regression in the legacy importer: a malformed
sidecar that renders "broken" today would have silently vanished on
migration. It now imports carrying its reason.
* A partially-answered pick counted as CLOSED on the index while the panel
beside it rendered it "partial" — the two disagreed about one booth. Open
is the reading U4 needs, and it is declared rather than smuggled in.
`GET /b/<n>/marks.json` is new and load-bearing: sessions on other hosts polled
`<stem>.answer.json` over HTTP, so removing the sidecar without it would have
taken that capability away. `/b/<n>/asks` 308s to `/marks`. Legacy sidecars are
imported, never deleted — four are live and unanswered.
Also records the operator's deterministic-order directive as a cross-cutting v1
invariant, in ROADMAP.md with the per-collection rule table and as CLAUDE.md
invariant 6. The Booth's job is comparison; an order that moves between renders
does not crash, it misfiles the judgment.
242 tests. No version bump — a release tier for this is the operator's call.
|
||
|
|
ce598b3cf6 |
feat(items): one item record, so an annotation survives the zoom
The operator reported that zoomed-in images lose their annotations. That was
never a rendering bug. Three functions independently walked a booth and derived
overlapping subsets of the same facts -- build_gallery (kind, caption, blur,
doc), booth_view_file (kind, doc, image ring) and list_booths (kind counts,
cover) -- and the zoom route's subset was the smallest. Caption resolution lived
inside build_gallery's loop and nowhere else, so there was no code path by which
a caption could reach the zoom template. It was never sent.
booth/items.py is now the one truth: booth_items() returns the full record --
rel, kind, section, caption, blur, doc kind, size -- and the gallery, the zoom
view, the doc view and the index all read it. Patching view.html would have
fixed the symptom for images and left the next surface starting from the same
missing truth.
Two things fall out of the consolidation:
- the index and the booth page now agree on what an item IS. list_booths
counted every non-dot file, so an A/B pair with two caption sidecars read
as 4 items on the index and showed 2 tiles when you opened it.
- "section" (the item's subfolder) is computed and carried but nothing renders
it yet. That is deliberate: it is U7's whole input, and shipping the field
now makes U7 a template change rather than a resolver change.
Doc bodies are NOT rendered by the resolver -- the index touches every booth on
every page load, and rendering every markdown file in every booth would be the
price of that convenience. render_doc_body is a separate step for the one
surface that inlines them; an invariant test monkeypatches it to raise and
loads the index.
Verified beyond the suite, because this repo has shipped two dead controls that
every test passed: the caption was measured in a real browser at 1280x41 px,
visible, with elementFromPoint at its centre returning the caption itself.
layout-probe reports all controls hittable across index, gallery, zoom and doc.
192 tests pass (173 before, 19 new).
Contract: docs/contracts/u1_item_record.contract.md
|
||
|
|
21f4afc033 |
fix(booth): the reveal button was inert; add kept-lane wipe and in-booth keep
Three operator reports, one of them a real defect I had claimed was working. THE REVEAL BUTTON DID NOTHING, for a day. Its handler sat after the content block's closing tag, and a child template's out-of-block content is silently DISCARDED by Jinja. The button rendered. The handler never reached the browser. Two commits and a README paragraph said click-to-reveal worked, and the suite passed the entire time because nothing asserted against the SERVED page -- the template really did contain the code. Two guards, both confirmed to FAIL when the defect is reintroduced rather than merely added and assumed protective: * test_reveal_handler_actually_reaches_the_served_page greps the response * test_no_orphaned_markup_after_the_content_block guards the structure While moving it, caught a second instance of the same class: the explanatory comment I wrote for the fix contained a literal Jinja endblock tag, which Jinja would have parsed as a real tag and used to close the block early. KEPT-LANE ×. Wiping a kept booth required release-then-find-it-in-the-other- lane. That protected nothing and cost a hunt -- the board you just released is loose in a feed that turns over, and you have to go find it to finish a job you had already decided on. Protection now lives in the confirmation, which names the booth and says KEPT, instead of in the number of lanes you must traverse. Release stays as the reversible option. IN-BOOTH KEEP. `☆ keep` / `★ kept — release` beside "Wipe now", so promoting does not mean navigating back to the index. The booth page did not previously know its own kept state; it does now. Both post a `next` field to stay put -- and `next` is a form field, so it is attacker-controlled: only same-site absolute paths are honoured, with `//host`, schemes and backslashes refused, tested. 173 tests pass. |
||
|
|
59ba9f5c10 |
fix(booth): put the blur toggle on every item kind, and make it look like a control
The operator asked "no UI option to blur/unblur?" and was right twice over. MISSING ENTIRELY ON TWO OF THREE BRANCHES. booth.html renders docs, media and everything-else through separate <figure> blocks. The toggle went into the media branch only, so inline docs -- the branch that puts readable text straight on the page, the one that needs blur most -- had no control at all, and `other` files only got a caption row if they happened to carry a caption. This is the SECOND time this feature shipped having patched some branches and not others; the blurred class itself had the same gap one commit ago. So the toggle is now a single Jinja macro called from all three sites, which makes "patched two of three" impossible rather than merely unlikely, and test_every_item_kind_gets_exactly_one_blur_toggle counts toggles against figures across mixed kinds so a fourth branch cannot quietly skip it. INVISIBLE WHERE IT DID RENDER. v1 was a bare `◌` at 0.78rem in --muted with no border, no label and no hover affordance. It now reads `◌ blur` / `◉ blurred` with a border, matching the other per-item controls. A control nobody can find is a control that is not there. Docs get it in the doc bar beside ⤢ ⬇ ✕, with stopPropagation so submitting it does not collapse the <details> it lives inside. Verified live on all three kinds: 3 figures, 3 toggles, and the POST round trip blurs and un-blurs. 167 tests pass. |
||
|
|
b569a5bb50 |
feat(booth): close the keep round trip, and add cosmetic per-item blur
Two operator requests.
KEEP, BOTH DIRECTIONS. The kept lane could already release a booth back to
ephemeral, but an ephemeral booth could only be promoted from a shell -- so the
round trip was closed only if you had ssh. The /keep route and the `booth keep`
verb both already existed; only the button was missing. Adds ★ to the ephemeral
card, mirroring × on the other shoulder.
BLUR. Per-item cosmetic censoring: `booth blur <name> <file>...`, a ◌/◉ toggle
in each caption row, and 👁 click-to-reveal. State is `.blurred` in the booth
dir, one booth-relative path per line -- the same filesystem-is-the-state idiom
as .pins and .forever. An empty set deletes the marker rather than leaving a
zero-byte file, so `ls -a` tells the truth.
⚠ BLUR IS NOT ACCESS CONTROL, and the code, the docs and a test all say so on
purpose. A blurred item is still served at its own URL, still in the zip, still
on disk. The Booth has no auth by design. test_blur_is_cosmetic_the_file_is_
still_served asserts the 200 deliberately: if someone later "hardens" this into
a 403 that test fails, and it should, because half-implemented access control is
more dangerous than none.
Reveal is per-viewer and never persisted; a reload re-hides. With JS off an item
stays blurred, which is the safe direction to fail in.
Two things the first pass got wrong, both caught by checking rather than
assuming:
* The cover thumb. index.html has IDENTICAL markup in the kept and ephemeral
lanes, so a single-occurrence replace patched only the kept one and the
ephemeral front page happily displayed the thing someone had hidden. The
test that caught it was itself wrong first -- it matched the bare string
"blurred-thumb", which is in base.html's stylesheet on every page and so
passed in both states. It now asserts the attribute.
* Inline docs render through their own <figure> branch and were left
unblurred -- the branch that puts readable text straight on the page, so it
needed blur more than images do. The suite passed; a live curl caught it.
165 tests pass (154 pre-existing, unchanged).
|
||
|
|
88d3cf436e |
fix(booth): a partial ask answer is recorded, not refused
Operator: the form failed when a question was left blank. Refusing the whole submission over one blank threw away the picks that were made, and the HTML `required` on the radios blocked it in the browser before the server saw it. - answered questions recorded; blank ones land in `unanswered`; `complete` says whether the set is finished; a blank question carrying a note keeps the note - `required` dropped from both templates so the browser cannot block a partial - refused only when there is no pick anywhere AND no notes (a 400 — that would flip an open ask to answered with no decision recorded); a choice outside the option list is still an error - new ◐ partial state with an n/N count; skipped questions render as skipped - README + global CLAUDE.md tell reading sessions to check `complete` - 154 tests; v0.1.15 |
||
|
|
d7361e8b44 |
feat(booth): asks render INLINE in a verbatim report, placed by the author
Operator verdict on the separate /asks page: the question belongs with the artifact it is about. A four-voice audition wants each voice's radio group under that voice's audio, and one submit for the lot. - booth/inline.py: data-booth-ask="stem" | "stem:key" | data-booth-ask-submit, plus <!-- booth:ask ... --> comments; unknown stem left alone, not blanked - _ask_inline.html: self-contained fragments (own scoped styles, no JS), per-question groups bound to one form via the HTML5 form= attribute so a scattered multi-question ask still POSTs once - unplaced questions and a missing submit block are appended, so a partially marked-up page can never produce an unsubmittable 400 - chip becomes a jump link to the first open ask; /asks page kept as a fallback - 6 tests (one caught the partial-placement drop); v0.1.14 |
||
|
|
f99faabb80 |
fix(booth): asks were invisible in a booth serving its own index.html
A custom index.html is returned verbatim, so booth.html's asks panel never rendered there — a valid ask (emmie-anchor/anchor.ask.json) was listed by the CLI and shown nowhere, with nothing to say so. - panel extracted to _asks.html; new GET /b/<name>/asks standalone page - verbatim pages get an amber '? N open asks' chip beside the back chip - POST /answer honours back=asks so answering returns to that page - single-question asks now keep an optional 'title' (was silently dropped) - README + routes table; 8 regression tests; v0.1.12 |
||
|
|
125a1b7fc5 |
feat(booth): multi-question asks — a questions list renders one form with a radio group per question and lands as one answer sidecar keyed by question
- asks.py: single {prompt, options} and multi {title, questions:[{key, prompt, options, notes?}]} both normalise to questions[]; per-question notes; every question required on submit
- /answer reads choice.<key> / notes.<key> / notes for multi; single shape unchanged
- booth asks prints per-question picks; README + CLI header; install step symlinks the CLI to ~/.local/bin; v0.1.10; 135 tests
|
||
|
|
97589dd062 |
feat(booth): asks — a multiple-choice question a session poses in a booth, answered by the operator as a radio form + notes, written back as an answer sidecar
- booth/asks.py (stdlib): <stem>.ask.json question / <stem>.answer.json answer; normalise+validate, atomic write, list with answer folded in, broken asks surfaced not hidden - POST /b/<name>/answer: validates choice against the ask (400), unknown stem 404, re-answer overwrites - booth.html asks panel above the gallery; amber open / green answered; JS-off form POST; index card + booth header badge for open asks - CLI: booth ask / asks / answer [--wait [SECS]]; remote sessions poll <stem>.answer.json over HTTP - ask/answer files excluded from gallery items and item counts; 23 tests; v0.1.9 |
||
|
|
8060f8cb9a |
feat(booth): pin/favorite, multi-select delete, newest-first link board
The standing link board grew from a flat oldest-first list with a per-row × into a manageable board: newest links lead, favorites stay on top, and several dead links can go in one pass. - Ordering: order_for_display() renders pinned rows first, then newest-first within each group (the board is an append log, so newest = most recently posted — the row you usually came to grab). - Pin/favorite: a per-row ★ toggles pinned state via POST /b/<name>/pin. State lives in a .pins sidecar dotfile (one content id per line), NOT inline in links.md — so links.md stays a pure atomic-append log (many sessions post concurrently) and a row's content id never changes just because it was pinned. remove_link_entry drops a removed row's pin; orphaned pins are inert (renderer only stars a live id). - Multi-select delete: checkboxes feed POST /b/<name>/unlink-many (repeated 'sel' content ids), with a select-all box and a live count. The per-row × stays for single removal. - One <form> with formaction buttons, so checkboxes, ×, ★, and bulk delete coexist without nested forms AND all work with JS off; JS only adds select-all and the live count. Per-row × confirm reads desc/url from data-* attrs, so an arbitrary posted description can't break into the JS. - Every action is keyed by content id, never row position — same race-safety the existing × has, extended to the bulk path. - Fixed pre-existing undefined --fg/--bg CSS refs in the board styles. Tests: +19 (pins round-trip, ordering, orphan-inert, remove-unpins, /pin and /unlink-many endpoints, board render + order). Full suite 102 passing. Deployed to nh3-dev booth.service; verified live (newest-first, pin round-trip, bulk delete) against the real 31-row board with no data loss. |
||
|
|
22ec06fcaa |
feat(booth): per-row link removal + render the link board as real UI
The standing link board is the one MULTI-WRITER booth -- every agent session appends operator-facing URLs to it. "Delete the folder" was the only granularity available, so removing one dead link meant hand-editing markdown. It is 32 rows and only grows. booth links row number, entry id, raw row booth unlink 3 by row number booth unlink 8b40e0a5 by entry id (what the UI's x posts) POST /b/<name>/unlink form field `entry` = content id ROWS ARE ADDRESSED BY CONTENT ID, NEVER BY POSITION. The board is append-only and multi-writer: another session can post between listing it and clicking x, and an index would then delete a neighbour. An id either matches the row you saw or matches nothing. A row number typed at the CLI is resolved to its id BEFORE anything is deleted. Appends and prunes now take the same flock on .links.lock, so a post cannot be lost inside a prune's read-modify-write. UI: a booth carrying links.md renders as rows -- description, URL, provenance, copy button, per-row x -- instead of a markdown blob. links.md is filtered out of the gallery so it does not appear twice; the header counts LINKS not files; the empty-state and the one-click "Wipe now" both stand down for a board (same rule as the kept lane: nothing durable is one click from gone). booth/links.py extracted, STDLIB ONLY. The CLI needs this logic and must not require the service venv -- importing app.py drags in FastAPI, so deleting a line from a text file would have needed a web framework installed. THREE BUGS FOUND BY TESTING, all in the shell wrapper while the module was correct throughout -- module-only tests would have caught none of them: - `[ "$n" -eq 0 ] && echo ...` as the LAST statement made `booth links` exit 1 whenever the board had rows. `unlink`'s index lookup calls it inside $( ) under `set -e`, so a successful listing killed the caller and the removal silently did nothing while reporting success. - ids are 8 hex chars and roughly one in forty is ALL DIGITS; those were read as row numbers, resolved to nothing, and removed nothing. Now disambiguated by the id's actual shape, not by "is it numeric". - filtering links.md out of the gallery left `items` empty, so a full board rendered "This booth is empty" and an empty <div class="gallery"> under 32 visible rows. 87 tests (was 76): parser tolerance of hand-written prose, content-id stability across concurrent appends, removal precision, UI branch behaviour for board/normal/empty booths, and subprocess CLI tests pinning the two shell bugs. Deployed to nh3-dev and verified against the live 32-row board read-only; board file byte-identical afterwards. |
||
|
|
d88f235688 |
feat(booth): kept boards can be deleted from the UI; document the TTL-reset trap
Kept boards had no delete path in the UI at all. The kept lane deliberately omits the wipe control -- a one-click wipe next to the durable stuff is a footgun -- but "deliberate" had been implemented as "impossible": the only routes out were ssh or a hand-written API call. Now it is two deliberate acts. A `release` control on kept cards drops the sentinel, the board moves to the ephemeral lane, and the existing x wipes it from there. Release is reversible -- POST /b/<name>/keep pins it again. POST /b/<name>/unkeep release the pin POST /b/<name>/keep pin it (round-trip, so release is not a one-way door) FOUND WHILE TESTING, and it invalidates the previously-documented workaround: removing the sentinel BUMPS the booth directory's mtime, and booth age is the newest mtime in the tree -- so a released board's clock RESETS from 10,000s to 0s and it survives another full TTL. The old comment said "remove the sentinel first (it rejoins the sweep)", which is true but means the board lives another 24h, not that it gets reaped. Unkeep-and-wait is a delay, not a delete. test_releasing_a_board_RESETS_its_ttl_clock pins that behaviour deliberately so nobody re-derives the workaround. Release is what unlocks the x; the x is what deletes. CLI: `booth rm` already worked on kept boards but said nothing about it. It now announces "(was KEPT -- durable board)" so wiping something durable can never look identical to wiping run output. Not a block -- a CLI user naming a booth is being explicit. 5 new tests (67 pass). Verified live on nh3-dev: release renders on all four kept boards, the ephemeral lane keeps its x, and the links board is untouched with its sentinel intact. |
||
|
|
299b52458b |
feat(booth): render .md/.txt/.log inline in the gallery, collapsible + closable
Docs used to render as a clumsy link that navigated to a separate page. They now render in place: build_gallery pre-renders each doc (markdown -> HTML, plain text raw) and the gallery shows it inside a native <details open> disclosure that spans the full grid width so prose has a readable measure. The doc bar carries: a collapse chevron (the whole <details> summary toggles, works with JS off), a full-page link (still reaches the standalone viewer), a download link, and a session-close ✕. The ✕ needed stopPropagation + preventDefault because it lives inside <summary> — otherwise its click would toggle the disclosure instead of hiding the item. Close is JS (progressive enhancement); collapse is native. Two design points: - Plain text is returned RAW from build_gallery and escaped by the template inside <pre>. Pre-escaping in Python plus Jinja autoescape would double-encode angle brackets; a test pins the single-escape. - Inlining is bounded by DOC_MAX_BYTES. A doc over the limit keeps the old link-out behaviour rather than being rendered into every index load; a test covers the fallback. The shared .markdown-body / .textview typography moved from doc.html's scoped <style> into base.html so the inline body and the full-page view render identically; doc.html keeps only its page-layout wrapper. Updated the pre-existing test_gallery_links_docs_to_view: it asserted the old link-out behaviour the operator asked to change, so it now asserts the inline render plus the surviving full-page and download affordances. 61 pass. Verified live: markdown renders with headings/table/blockquote/code, txt preserves whitespace and single-escapes, collapse and ✕-close both work. |
||
|
|
95228299bc |
feat(booth): kept boards — a .forever sentinel and a standing link board
Agent sessions hand the operator URLs and they drown in terminal scrollback. The Booth is the right home for them — it already has the one property that decides adoption, which is that a session can publish with mkdir and cp, no API key, no schema, no deploy — but everything in it dies in 24h. So: a booth containing `.forever` is never swept, and renders in its own Kept lane at the top of the index. Opt-in per booth, so the ephemeral default is untouched and nobody inherits a cleanup chore. `rm` the sentinel and the board rejoins the sweep; the CLI verbs are sugar over exactly that, which keeps the filesystem-is-the-state model honest. The pin is deliberately NOT wired into is_expired(). That stays a pure age question feeding the `expires_in` countdown; only sweep_once() honours the sentinel. Keeping expiry arithmetic and reaper policy apart means they cannot drift into each other. Kept cards are visually separated per Australis: a 2px top edge in aurora blue, the one accent border the system sanctions. They show "kept" instead of a countdown, and they deliberately lose the one-click wipe button — a × next to the durable stuff is a footgun, so removing a kept board is a two-step act. `booth link <url> [description]` appends to the standing `links` board, creating and keeping it on first use. Entries carry provenance (handle or hostname, plus a timestamp) because a bare URL is unreadable three days later. The append is one printf of one line to an O_APPEND fd — atomic under PIPE_BUF on POSIX — which matters because many agents post to one board and interleaved half-lines would be the obvious failure mode. Seven tests cover the sentinel: detection, survival of a sweep that wipes its neighbour, the deliberate is_expired/sweep_once split, the listing flag, the sentinel not inflating item counts, and both lane-rendering directions. Two of them originally asserted on the bare strings "Kept" and "kept-grid", which passed for the wrong reason — those also appear in the inlined stylesheet served on every page — so they now assert the full class attribute. 55 pass. Also corrects the Homepage card's description, which advertised a flat 24h TTL that is no longer the whole story. |
||
|
|
6872e524de |
feat(booth): prev/next arrows in the image viewer
Zooming an image now shows ‹ / › arrows at the left/right edges that step to the previous/next image in the booth (gallery sorted-rel order), wrapping around, plus keyboard ←/→. Arrows are hidden when a booth has a single image. booth_view_file computes neighbors via a new booth_image_names() helper and passes prev_url/next_url to view.html. 3 new tests, suite 47 passing; deployed + verified live on nh3-dev :8090. |
||
|
|
54ed0778d3 |
feat(booth): view .md (rendered) and .txt/.log in-booth without downloading
Loose .md/.txt/.log files rendered as forced-download links in the gallery
and downloaded (or showed raw) when opened. Now they open in a readable
in-booth page via the existing /b/<name>/view route:
- .md -> rendered HTML (Python-Markdown: fenced code, tables, sane lists),
styled in an Australis .markdown-body with the viewer chrome;
- .txt/.log -> preformatted <pre> text view.
The gallery links docs to the viewer (📄) instead of a download; the view
page keeps a ⬇ (?dl=1) for saving. Files over 2 MB hand back raw. New
markdown dep (optional-import: degrades .md to text view if absent).
booth_image_view -> booth_view_file (now handles image + doc + raw-fallback).
9 new tests, suite 44 passing; deployed + verified live on nh3-dev :8090.
|
||
|
|
79d6fa98a6 |
feat(booth): wrap verbatim index.html booths with a back-to-booths chip + inherited favicon
Verbatim-index.html booths were served raw (FileResponse) with no base
template, so they had no favicon and no way back to the booth index — the
gap the app-rendered gallery/zoom pages already covered via base.html.
booth_view now reads a small verbatim index.html and, via a pure
wrap_verbatim_html(), injects:
- a fixed-position 'all booths' chip (scoped class, max z-index, hidden
in print), pinned top-right (empty on left-aligned report layouts; a
top-left chip clips the page title) and appended at the END of the
document so it never reorders the page;
- the Booth favicon at the first head-ish seam, only if the page declares
no icon of its own.
Injection is doctype/charset-safe for the compact HTML real booths use
(<!doctype html><meta charset><title><style>…content, no explicit head/
body): nothing is ever placed ahead of a leading <!doctype> (which would
force quirks mode), and the ~250B favicon link keeps the charset <meta>
inside the first-1024-byte detection window. The raw file route
(/b/<name>/index.html) stays byte-for-byte, so assets and ?dl=1 downloads
are unchanged; files over 8 MB serve raw, unwrapped.
Verified live on nh3-dev :8090 across the real booth shapes (compact-HTML
crow-*/jackdaw-*/mimir-favicon, well-formed dcc-summarizer-ab, own-icon
edict-favicon). 10 new tests; suite 38 passing.
|
||
|
|
a8bfe592b4 |
feat(booth): downloadable booths — whole-booth zip + ?dl force-download (v0.1.4)
A verbatim index.html booth (e.g. edict-design-brief: a rendered brief + its
.md) had no download affordance — the page is served raw with no gallery/per-file
chrome. Adds:
- GET /b/<name>/?download=1 -> streams the whole booth as <name>.zip (attachment)
- GET /b/<name>/<file>?dl=1 -> forces Content-Disposition: attachment (html/md/
text otherwise render inline with no easy save)
- a download link on the index card (the accessible spot for verbatim booths)
and the gallery header
Tests for both; verified live against edict-design-brief on nh3-dev :8090.
|
||
|
|
4e6c7951ff |
feat(booth): image viewer page with Fit/1:1, download, Esc-back (v0.1.2)
Clicking a gallery image now opens a dedicated viewer instead of dumping you on the raw file. - GET /b/<name>/view?f=<img> — full-viewport viewer (registered before the file catch-all so /view wins; non-image f 307-redirects to the raw file, traversal and missing f 404). - Fit (downscale-only) / 1:1 (natural pixels, scroll-to-pan) toggle that only appears when the image is larger than the viewport — when it already fits, Fit ≡ 1:1 so the toggle is hidden. Re-evaluates on resize. - Download button + ✕/Esc back to the gallery. Australis-themed, progressive JS (degrades to fit-only, no-JS still shows the image + download + back). - 5 new tests (34 total, all green); verified Fit/1:1/hidden-toggle states in a real browser. |
||
|
|
f328848bd7 |
feat(booth): upload-for-pickup with human-readable ids (v0.1.1)
Add a reverse direction to the Booth: the operator (or any client via `curl -F`) can upload files through the browser and pick them up by a human-readable id. - POST /upload — streams files to a new booth named with a human-readable id (e.g. 4-wombat / star-84), 303-redirects to /b/<id>/ (id in the Location header so curl clients can read it). Uploads reuse the whole booth machinery (render, per-file download links, 24h TTL sweep, delete). - Human-readable ids: word+number in either order, collision-checked, from a curated 140-word friendly list; secrets-based selection. - Safety: filenames reduced to a safe basename (no traversal), streaming size cap (BOOTH_MAX_UPLOAD_MB, default 1024) + file-count cap (BOOTH_MAX_FILES, default 50), partial-write cleanup on any failure. - UI: Australis-themed upload/drop panel (drag-drop, progressive-enhancement JS, degrades to a native file input), a "⬆ pickup" badge on upload booths, a pickup banner, and a ⬇ download link on every gallery item. - python-multipart dependency; homepage tile description updated; 9 new tests (24 total, all green). |
||
|
|
55c0655126 |
feat(booth): add The Booth — ephemeral media drop board for CC sessions
A standing user-level web server (nh3-dev :8090) that renders drop-folders under ~/booth-data as ephemeral media "booths" so Claude Code sessions can surface A/B renders and smoke results to the operator, then let them self-wipe. - Scan-and-serve model, no database, no upload API — a booth is just a folder. A folder's own index.html is served verbatim; otherwise an auto-gallery of images / webm+mp4 video / audio is rendered, with <file>.txt caption sidecars folded in (labels A/B pairs). - 24h TTL from newest mtime in the tree; background sweeper wipes stale booths. - Path-traversal + symlink-escape guarded; delete via UI button or DELETE API. - FastAPI + Jinja2, runs from the checkout under systemctl --user (booth.service), alongside the other nh3-dev fleet sidecars. 15 tests, all green. - Homepage tile added (Apps -> The Booth, siteMonitor /healthz). - Harden the homepage rsync doc: exclude *.bak* and logs/ so --delete can't wipe the host's dated services.yaml backups (footgun found deploying this). |