15 lines
748 B
Markdown
15 lines
748 B
Markdown
---
|
||
created: '2026-04-05T05:57:00+00:00'
|
||
id: e51c7371-6274-4a62-84f0-73c66b2e7c0c
|
||
links: []
|
||
modified: '2026-04-05T05:57:00+00:00'
|
||
summary: This note outlines CNC tool setup, emphasizing critical parameters like diameter,
|
||
negative Z values, and cutter count, followed by calibration involving cycle start/feed
|
||
stop to verify Z height and adjust Z offset if the tool doesn't make contact.
|
||
tags: []
|
||
title: Fryer Tool Setting
|
||
---
|
||
|
||
1. Go to tools page and set up tools. Diameter and negative Z values are important. Set up number of cutters as well.
|
||
2. Go to tool calibration--- hit cycle start and then feed stop. Verify that Z to go is reasonable.
|
||
3. Allow tool to touch-- if it does not touch, go to Z offset and increase Z length silghtly. |