vh/VuongKB
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Auto-summarize: ATLAS/Machining/Fryer/Fryer Tool Setting.md

Browse Source
This commit is contained in:
Atlas
2026-04-05 00:38:42 -07:00
parent 00631f48bf
commit d577bbe44b
1 changed files with 12 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
ATLAS/Machining/Fryer/Fryer Tool Setting.md
+12
View File
@@ -1,3 +1,15 @@
---
created: '2026-04-05T05:57:00+00:00'
id: e51c7371-6274-4a62-84f0-73c66b2e7c0c
links: []
modified: '2026-04-05T05:57:00+00:00'
summary: This note outlines CNC tool setup, emphasizing critical parameters like diameter,
negative Z values, and cutter count, followed by calibration involving cycle start/feed
stop to verify Z height and adjust Z offset if the tool doesn't make contact.
tags: []
title: Fryer Tool Setting
---
1. Go to tools page and set up tools.  Diameter and negative Z values are important.  Set up number of cutters as well. 1. Go to tools page and set up tools.  Diameter and negative Z values are important.  Set up number of cutters as well.
2. Go to tool calibration--- hit cycle start and then feed stop.  Verify that Z to go is reasonable. 2. Go to tool calibration--- hit cycle start and then feed stop.  Verify that Z to go is reasonable.
3. Allow tool to touch-- if it does not touch, go to Z offset and increase Z length silghtly. 3. Allow tool to touch-- if it does not touch, go to Z offset and increase Z length silghtly.