From d577bbe44bfcc1914fbb579e1467cdaeca493521 Mon Sep 17 00:00:00 2001 From: Atlas Date: Sun, 5 Apr 2026 00:38:42 -0700 Subject: [PATCH] Auto-summarize: ATLAS/Machining/Fryer/Fryer Tool Setting.md --- ATLAS/Machining/Fryer/Fryer Tool Setting.md | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/ATLAS/Machining/Fryer/Fryer Tool Setting.md b/ATLAS/Machining/Fryer/Fryer Tool Setting.md index 9ff8683..6ff730e 100644 --- a/ATLAS/Machining/Fryer/Fryer Tool Setting.md +++ b/ATLAS/Machining/Fryer/Fryer Tool Setting.md @@ -1,3 +1,15 @@ +--- +created: '2026-04-05T05:57:00+00:00' +id: e51c7371-6274-4a62-84f0-73c66b2e7c0c +links: [] +modified: '2026-04-05T05:57:00+00:00' +summary: This note outlines CNC tool setup, emphasizing critical parameters like diameter, + negative Z values, and cutter count, followed by calibration involving cycle start/feed + stop to verify Z height and adjust Z offset if the tool doesn't make contact. +tags: [] +title: Fryer Tool Setting +--- + 1. Go to tools page and set up tools.  Diameter and negative Z values are important.  Set up number of cutters as well. 2. Go to tool calibration--- hit cycle start and then feed stop.  Verify that Z to go is reasonable. 3. Allow tool to touch-- if it does not touch, go to Z offset and increase Z length silghtly. \ No newline at end of file