mirror of
https://github.com/jokob-sk/NetAlertX.git
synced 2025-12-07 09:36:05 -08:00
40 lines
1.3 KiB
Markdown
Executable File
40 lines
1.3 KiB
Markdown
Executable File
## Overview
|
|
|
|
A plugin for importing devices from an SNMP enabled router or switch. Using SNMP offers an efficient way to discover IPv4 devices across one or more networks/subnets/vlans.
|
|
|
|
### Usage
|
|
|
|
Specify the following settings in the Settings section of NetAlertX:
|
|
|
|
- `SNMPDSC_routers` - A list of `snmpwalk` commands to execute against IP addresses of roputers/switches with SNMP turned on. For example:
|
|
|
|
- `snmpwalk -v 2c -c public -OXsq 192.168.1.1 .1.3.6.1.2.1.3.1.1.2`
|
|
- `snmpwalk -v 2c -c public -Oxsq 192.168.1.1 .1.3.6.1.2.1.3.1.1.2` (note: lower case `x`)
|
|
|
|
|
|
### Setup Cisco IOS
|
|
|
|
Enable IOS SNMP service and restrict to selected (internal) IP/Subnet.
|
|
|
|
````
|
|
! Add standard ip access-list 10
|
|
ip access-list standard 10
|
|
permit 192.168.1.0 0.0.0.255
|
|
permit host 192.168.2.10
|
|
!
|
|
! Enable IOS snmp server with Read Only community 'mysnmpcommunitysecret' name.
|
|
! Restrict connections to access-list 10
|
|
snmp-server community mysnmpcommunitysecret RO 10
|
|
````
|
|
|
|
Confirm SNMP enabled
|
|
````
|
|
show snmp
|
|
````
|
|
|
|
### Notes
|
|
|
|
- Only IPv4 supported.
|
|
- The SNMP OID `.1.1.1.3.6.1.2.1.3.1.1.2` is specifically for devices IPv4 ARP table. This OID has been tested on Cisco ISRs and other L3 devices. Support may vary between other vendors / devices.
|
|
- Expected output (ingestion) in format `iso.3.6.1.2.1.3.1.1.2.3.1.192.168.1.2 "6C 6C 6C 6C 6C 6C "`.
|