mirror of
https://github.com/jokob-sk/NetAlertX.git
synced 2025-12-07 09:36:05 -08:00
21 lines
1.2 KiB
Markdown
Executable File
21 lines
1.2 KiB
Markdown
Executable File
## Overview
|
|
|
|
Arp-scan is a command-line tool that uses the ARP protocol to discover and fingerprint IP hosts on the local network. An alternative to ARP scan is to enable the `PIHOLE_RUN` PiHole integration settings. The arp-scan (and other Network-scan plugin times using the `SCAN_SUBNETS` setting) time depends on the number of IP addresses to check so set this up carefully with the appropriate network mask and interface. Check the [subnets documentation](https://github.com/jokob-sk/Pi.Alert/blob/main/docs/SUBNETS.md) for help on setting up VLANs, what VLANs are supported, or how to figure out the network mask and your interface.
|
|
|
|
### Usage
|
|
|
|
- Go to settings and set the `SCAN_SUBNETS` setting as per [subnets documentation](https://github.com/jokob-sk/Pi.Alert/blob/main/docs/SUBNETS.md).
|
|
- Enable the plugin by changing the RUN parameter from disabled to your preferred run time (usually: `schedule`).
|
|
- Specify the schedule in the `ARPSCAN_RUN_SCHD` setting
|
|
- Adjust the timeout if needed in the `ARPSCAN_RUN_TIMEOUT` setting
|
|
- Review remaining settings
|
|
- SAVE
|
|
- Wait for the next scan to finish
|
|
|
|
#### Examples
|
|
|
|
Settings:
|
|
|
|
|
|
|