Merge pull request #1321 from jokob-sk/main

sync

.github/workflows/docker_prod.yml

@@ -32,6 +32,18 @@ jobs:
       - name: Set up Docker Buildx
         uses: docker/setup-buildx-action@v3
 
+      # --- Previous approach Get release version from tag
+      - name: Set up dynamic build ARGs
+        id: getargs
+        run: echo "version=$(cat ./stable/VERSION)" >> $GITHUB_OUTPUT
+
+      - name: Get release version
+        id: get_version_prev
+        run: echo "::set-output name=version::${GITHUB_REF#refs/tags/}"
+
+      - name: Create .VERSION file
+        run: echo "${{ steps.get_version.outputs.version }}" >> .VERSION_PREV
+
       # --- Get release version from tag
       - name: Get release version
         id: get_version

.gitignore

@@ -11,6 +11,7 @@ nohup.out
 config/*
 .ash_history
 .VERSION
+.VERSION_PREV
 config/pialert.conf
 config/app.conf
 db/*

Dockerfile

@@ -1,16 +1,16 @@
 # The NetAlertX Dockerfile has 3 stages:
 #
 # Stage 1. Builder - NetAlertX Requires special tools and packages to build our virtual environment, but
-# which are not needed in future stages.  We build the builder and extract the venv for runner to use as 
+# which are not needed in future stages.  We build the builder and extract the venv for runner to use as
 # a base.
 #
 # Stage 2. Runner builds the bare minimum requirements to create an operational NetAlertX. The primary
 # reason for breaking at this stage is it leaves the system in a proper state for devcontainer operation
-# This image also provides a break-out point for uses who wish to execute the anti-pattern of using a 
+# This image also provides a break-out point for uses who wish to execute the anti-pattern of using a
 # docker container as a VM for experimentation and various development patterns.
 #
 # Stage 3. Hardened removes root, sudoers, folders, permissions, and locks the system down into a read-only
-# compatible image. While NetAlertX does require some read-write operations, this image can guarantee the 
+# compatible image. While NetAlertX does require some read-write operations, this image can guarantee the
 # code pushed out by the project is the only code which will run on the system after each container restart.
 # It reduces the chance of system hijacking and operates with all modern security protocols in place as is
 # expected from a security appliance.
@@ -29,7 +29,7 @@ COPY requirements.txt /tmp/requirements.txt
 RUN apk add --no-cache bash shadow python3 python3-dev gcc musl-dev libffi-dev openssl-dev git \
     && python -m venv /opt/venv
 
-# Create virtual environment owned by root, but readable by everyone else. This makes it easy to copy 
+# Create virtual environment owned by root, but readable by everyone else. This makes it easy to copy
 # into hardened stage without worrying about permissions and keeps image size small. Keeping the commands
 # together makes for a slightly smaller image size.
 RUN pip install --no-cache-dir -r /tmp/requirements.txt && \
@@ -95,11 +95,11 @@ ENV READ_WRITE_FOLDERS="${NETALERTX_DATA} ${NETALERTX_CONFIG} ${NETALERTX_DB} ${
                        ${SYSTEM_SERVICES_ACTIVE_CONFIG}"
 
 #Python environment
-ENV PYTHONUNBUFFERED=1 
+ENV PYTHONUNBUFFERED=1
 ENV VIRTUAL_ENV=/opt/venv
 ENV VIRTUAL_ENV_BIN=/opt/venv/bin
 ENV PYTHONPATH=${NETALERTX_APP}:${NETALERTX_SERVER}:${NETALERTX_PLUGINS}:${VIRTUAL_ENV}/lib/python3.12/site-packages
-ENV PATH="${SYSTEM_SERVICES}:${VIRTUAL_ENV_BIN}:$PATH" 
+ENV PATH="${SYSTEM_SERVICES}:${VIRTUAL_ENV_BIN}:$PATH"
 
 # App Environment
 ENV LISTEN_ADDR=0.0.0.0
@@ -110,7 +110,7 @@ ENV VENDORSPATH_NEWEST=${SYSTEM_SERVICES_RUN_TMP}/ieee-oui.txt
 ENV ENVIRONMENT=alpine
 ENV READ_ONLY_USER=readonly READ_ONLY_GROUP=readonly
 ENV NETALERTX_USER=netalertx NETALERTX_GROUP=netalertx
-ENV LANG=C.UTF-8 
+ENV LANG=C.UTF-8
 
 
 RUN apk add --no-cache bash mtr libbsd zip lsblk tzdata curl arp-scan iproute2 iproute2-ss nmap \
@@ -138,6 +138,7 @@ RUN install -d -o ${NETALERTX_USER} -g ${NETALERTX_GROUP} -m 700 ${READ_WRITE_FO
 
 # Copy version information into the image
 COPY --chown=${NETALERTX_USER}:${NETALERTX_GROUP} .[V]ERSION ${NETALERTX_APP}/.VERSION
+COPY --chown=${NETALERTX_USER}:${NETALERTX_GROUP} .[V]ERSION ${NETALERTX_APP}/.VERSION_PREV
 
 # Copy the virtualenv from the builder stage
 COPY --from=builder --chown=20212:20212 ${VIRTUAL_ENV} ${VIRTUAL_ENV}
@@ -147,12 +148,12 @@ COPY --from=builder --chown=20212:20212 ${VIRTUAL_ENV} ${VIRTUAL_ENV}
 # This is done after the copy of the venv to ensure the venv is in place
 # although it may be quicker to do it before the copy, it keeps the image
 # layers smaller to do it after.
-RUN if [ -f '.VERSION' ]; then \
-        cp '.VERSION' "${NETALERTX_APP}/.VERSION"; \
-    else \
-        echo "DEVELOPMENT 00000000" > "${NETALERTX_APP}/.VERSION"; \
-    fi && \
-    chown 20212:20212 "${NETALERTX_APP}/.VERSION" && \
+RUN for vfile in .VERSION .VERSION_PREV; do \
+        if [ ! -f "${NETALERTX_APP}/${vfile}" ]; then \
+            echo "DEVELOPMENT 00000000" > "${NETALERTX_APP}/${vfile}"; \
+        fi; \
+        chown 20212:20212 "${NETALERTX_APP}/${vfile}"; \
+    done && \
     apk add --no-cache libcap && \
     setcap cap_net_raw+ep /bin/busybox && \
     setcap cap_net_raw,cap_net_admin+eip /usr/bin/nmap && \
@@ -180,7 +181,7 @@ ENV UMASK=0077
 
 # Create readonly user and group with no shell access.
 # Readonly user marks folders that are created by NetAlertX, but should not be modified.
-# AI may claim this is stupid, but it's actually least possible permissions as 
+# AI may claim this is stupid, but it's actually least possible permissions as
 # read-only user cannot login, cannot sudo, has no write permission, and cannot even
 # read the files it owns. The read-only user is ownership-as-a-lock hardening pattern.
 RUN addgroup -g 20212 "${READ_ONLY_GROUP}" && \

README.md

@@ -34,9 +34,7 @@ Get visibility of what's going on on your WIFI/LAN network and enable presence d
 ## 🚀 Quick Start
 
 > [!WARNING]
-> ⚠️ **Important:** The documentation has been recently updated and some instructions may have changed.
-> If you are using the currently live production image, please follow the instructions on [Docker Hub](https://hub.docker.com/r/jokobsk/netalertx) for building and running the container.
-> These docs reflect the latest development version and may differ from the production image.
+> ⚠️ **Important:** The docker-compose has recently changed. Carefully read the [Migration guide](https://jokob-sk.github.io/NetAlertX/MIGRATION/?h=migrat#12-migration-from-netalertx-v25524) for detailed instructions.
 
 Start NetAlertX in seconds with Docker:
 

docs/DOCKER_COMPOSE.md

@@ -1,9 +1,7 @@
 # NetAlertX and Docker Compose
 
 > [!WARNING]
-> ⚠️ **Important:** The documentation has been recently updated and some instructions may have changed.
-> If you are using the currently live production image, please follow the instructions on [Docker Hub](https://hub.docker.com/r/jokobsk/netalertx) for building and running the container.
-> These docs reflect the latest development version and may differ from the production image.
+> ⚠️ **Important:** The docker-compose has recently changed. Carefully read the [Migration guide](https://jokob-sk.github.io/NetAlertX/MIGRATION/?h=migrat#12-migration-from-netalertx-v25524) for detailed instructions.
 
 Great care is taken to ensure NetAlertX meets the needs of everyone while being flexible enough for anyone. This document outlines how you can configure your docker-compose. There are many settings, so we recommend using the Baseline Docker Compose as-is, or modifying it for your system.Good care is taken to ensure NetAlertX meets the needs of everyone while being flexible enough for anyone. This document outlines how you can configure your docker-compose. There are many settings, so we recommend using the Baseline Docker Compose as-is, or modifying it for your system.
 

docs/DOCKER_INSTALLATION.md

@@ -61,8 +61,7 @@ See alternative [docked-compose examples](https://github.com/jokob-sk/NetAlertX/
 
 | Required | Path | Description |
 | :------------- | :------------- | :-------------|
-| ✅ | `:/data/config` | Folder which will contain the `app.conf` & `devices.csv` ([read about devices.csv](https://github.com/jokob-sk/NetAlertX/blob/main/docs/DEVICES_BULK_EDITING.md)) files  |
-| ✅ | `:/data/db` | Folder which will contain the `app.db` database file  |
+| ✅ | `:/data` | Folder which will contain the `/db/app.db`, `/config/app.conf` & `/config/devices.csv` ([read about devices.csv](https://github.com/jokob-sk/NetAlertX/blob/main/docs/DEVICES_BULK_EDITING.md)) files  |
 | ✅ | `/etc/localtime:/etc/localtime:ro` | Ensuring the timezone is teh same as on teh server.  |
 | | `:/tmp/log` |  Logs folder useful for debugging if you have issues setting up the container  |
 | | `:/tmp/api` |  The [API endpoint](https://github.com/jokob-sk/NetAlertX/blob/main/docs/API.md) containing static (but regularly updated) json and other files. Path configurable via `NETALERTX_API` environment variable.   |

docs/DOCKER_MAINTENANCE.md

@@ -1,20 +1,18 @@
 # The NetAlertX Container Operator's Guide
 
 > [!WARNING]
-> ⚠️ **Important:** The documentation has been recently updated and some instructions may have changed.  
-> If you are using the currently live production image, please follow the instructions on [Docker Hub](https://hub.docker.com/r/jokobsk/netalertx) for building and running the container.  
-> These docs reflect the latest development version and may differ from the production image.
+> ⚠️ **Important:** The docker-compose has recently changed. Carefully read the [Migration guide](https://jokob-sk.github.io/NetAlertX/MIGRATION/?h=migrat#12-migration-from-netalertx-v25524) for detailed instructions.
 
 This guide assumes you are starting with the official `docker-compose.yml` file provided with the project. We strongly recommend you start with or migrate to this file as your baseline and modify it to suit your specific needs (e.g., changing file paths). While there are many ways to configure NetAlertX, the default file is designed to meet the mandatory security baseline with layer-2 networking capabilities while operating securely and without startup warnings.
 
 This guide provides direct, concise solutions for common NetAlertX administrative tasks. It is structured to help you identify a problem, implement the solution, and understand the details.
 
 ## Guide Contents
- 
-- Using a Local Folder for Configuration  
-- Migrating from a Local Folder to a Docker Volume  
-- Applying a Custom Nginx Configuration  
-- Mounting Additional Files for Plugins  
+
+- Using a Local Folder for Configuration
+- Migrating from a Local Folder to a Docker Volume
+- Applying a Custom Nginx Configuration
+- Mounting Additional Files for Plugins
 
 
 > [!NOTE]

docs/FILE_PERMISSIONS.md

@@ -62,7 +62,7 @@ docker run -it --rm --name netalertx --user "0" \
 >
 >  `sudo chown -R 20211:20211 /local_data_dir`
 >
->  `sudo chmod -R a+rwx  /local_data_dir1`
+>  `sudo chmod -R a+rwx  /local_data_dir`
 >
 
 ---

docs/MIGRATION.md

@@ -1,11 +1,5 @@
 # Migration
 
-> [!WARNING]
-> ⚠️ **Important:** The documentation has been recently updated and some instructions may have changed.
-> If you are using the currently live production image, please follow the instructions on [Docker Hub](https://hub.docker.com/r/jokobsk/netalertx) for building and running the container.
-> These docs reflect the latest development version and may differ from the production image.
-
-
 When upgrading from older versions of NetAlertX (or PiAlert by jokob-sk), follow the migration steps below to ensure your data and configuration are properly transferred.
 
 > [!TIP]
@@ -259,12 +253,11 @@ docker run -it --rm --name netalertx --user "0" \
   ghcr.io/jokob-sk/netalertx:latest
 ```
 
-..or alternatively execute:
+...or alternatively execute:
 
 ```bash
-sudo chown -R 20211:20211 /local_data_dir/config
-sudo chown -R 20211:20211 /local_data_dir/db
-sudo chmod -R a+rwx /local_data_dir/
+sudo chown -R 20211:20211 /local_data_dir
+sudo chmod -R a+rwx /local_data_dir
 ```
 
 7. Stop the container

docs/README.md

@@ -13,13 +13,13 @@ There is also an in-app Help / FAQ section that should be answering frequently a
 
 #### 🐳 Docker (Fully supported)
 
-- The main installation method is as a [docker container - follow these instructions here](./DOCKER_INSTALLATION.md). 
+- The main installation method is as a [docker container - follow these instructions here](./DOCKER_INSTALLATION.md).
 
 #### 💻 Bare-metal / On-server (Experimental/community supported 🧪)
 
-- [(Experimental 🧪) On-hardware instructions](./HW_INSTALL.md) 
+- [(Experimental 🧪) On-hardware instructions](./HW_INSTALL.md)
 
-- Alternative bare-metal install forks: 
+- Alternative bare-metal install forks:
   - [leiweibau's fork](https://github.com/leiweibau/Pi.Alert/) (maintained)
   - [pucherot's original code](https://github.com/pucherot/Pi.Alert/) (un-maintained)
 
@@ -63,7 +63,6 @@ There is also an in-app Help / FAQ section that should be answering frequently a
 
 #### ♻ Misc
 
-- [Version history (legacy)](./VERSIONS_HISTORY.md)
 - [Reverse proxy (Nginx, Apache, SWAG)](./REVERSE_PROXY.md)
 - [Installing Updates](./UPDATES.md)
 - [Setting up Authelia](./AUTHELIA.md) (DRAFT)
@@ -80,27 +79,27 @@ There is also an in-app Help / FAQ section that should be answering frequently a
 - [Frontend development tips](./FRONTEND_DEVELOPMENT.md)
 - [Webhook secrets](./WEBHOOK_SECRET.md)
 
-Feel free to suggest or submit new docs via a PR. 
+Feel free to suggest or submit new docs via a PR.
 
 ## 👨‍💻 Development priorities
 
 Priorities from highest to lowest:
 
 * 🔼 Fixing core functionality bugs not solvable with workarounds
-* 🔵 New core functionality unlocking other opportunities (e.g.: plugins) 
-* 🔵 Refactoring enabling faster implementation of future functionality 
+* 🔵 New core functionality unlocking other opportunities (e.g.: plugins)
+* 🔵 Refactoring enabling faster implementation of future functionality
 * 🔽 (low) UI functionality & improvements (PRs welcome 😉)
 
-Design philosophy: Focus on core functionality and leverage existing apps and tools to make NetAlertX integrate into other workflows. 
+Design philosophy: Focus on core functionality and leverage existing apps and tools to make NetAlertX integrate into other workflows.
 
-Examples: 
+Examples:
 
     1. Supporting apprise makes more sense than implementing multiple individual notification gateways
-    2. Implementing regular expression support across settings for validation makes more sense than validating one setting with a specific expression. 
+    2. Implementing regular expression support across settings for validation makes more sense than validating one setting with a specific expression.
 
 UI-specific requests are a low priority as the framework picked by the original developer is not very extensible (and afaik doesn't support components) and has limited mobile support. Also, I argue the value proposition is smaller than working on something else.
 
-Feel free to submit PRs if interested. try to **keep the PRs small/on-topic** so they are easier to review and approve. 
+Feel free to submit PRs if interested. try to **keep the PRs small/on-topic** so they are easier to review and approve.
 
 That being said, I'd reconsider if more people and or recurring sponsors file a request 😉.
 
@@ -112,8 +111,8 @@ Please be as detailed as possible with **workarounds** you considered and why a
 
 If you submit a PR please:
 
-1. Check that your changes are backward compatible with existing installations and with a blank setup. 
-2. Existing features should always be preserved. 
+1. Check that your changes are backward compatible with existing installations and with a blank setup.
+2. Existing features should always be preserved.
 3. Keep the PR small, on-topic and don't change code that is not necessary for the PR to work
 4. New features code should ideally be re-usable for different purposes, not for a very narrow use case.
 5. New functionality should ideally be implemented via the Plugins system, if possible.
@@ -131,13 +130,13 @@ Suggested test cases:
 Some additional context:
 
 * Permanent settings/config is stored in the `app.conf` file
-* Currently temporary (session?) settings are stored in the `Parameters` DB table as key-value pairs. This table is wiped during a container rebuild/restart and its values are re-initialized from cookies/session data from the browser. 
+* Currently temporary (session?) settings are stored in the `Parameters` DB table as key-value pairs. This table is wiped during a container rebuild/restart and its values are re-initialized from cookies/session data from the browser.
 
 ## 🐛 Submitting an issue or bug
 
 Before submitting a new issue please spend a couple of minutes on research:
 
-* Check [🛑 Common issues](./DEBUG_TIPS.md#common-issues) 
+* Check [🛑 Common issues](./DEBUG_TIPS.md#common-issues)
 * Check [💡 Closed issues](https://github.com/jokob-sk/NetAlertX/issues?q=is%3Aissue+is%3Aclosed) if a similar issue was solved in the past.
 * When submitting an issue ❗[enable debug](./DEBUG_TIPS.md)❗
 

docs/SYNOLOGY_GUIDE.md

@@ -84,5 +84,5 @@ services:
 >
 >  `sudo chown -R 20211:20211 /local_data_dir`
 >
->  `sudo chmod -R a+rwx  /local_data_dir1`
+>  `sudo chmod -R a+rwx  /local_data_dir`
 >

front/js/common.js

@@ -378,7 +378,7 @@ function localizeTimestamp(input) {
   let tz = getSetting("TIMEZONE") || 'Europe/Berlin';
   input = String(input || '').trim();
 
-  // ✅ 1. Unix timestamps (10 or 13 digits)
+  // 1. Unix timestamps (10 or 13 digits)
   if (/^\d+$/.test(input)) {
     const ms = input.length === 10 ? parseInt(input, 10) * 1000 : parseInt(input, 10);
     return new Intl.DateTimeFormat('default', {
@@ -389,39 +389,53 @@ function localizeTimestamp(input) {
     }).format(new Date(ms));
   }
 
-  // ✅ 2. European DD/MM/YYYY
+  // 2. European DD/MM/YYYY
   let match = input.match(/^(\d{1,2})\/(\d{1,2})\/(\d{4})(?:[ ,]+(\d{1,2}:\d{2}(?::\d{2})?))?(.*)$/);
   if (match) {
-    let [ , d, m, y, t = "00:00:00", tzPart = "" ] = match;
+    let [, d, m, y, t = "00:00:00", tzPart = ""] = match;
     const iso = `${y}-${m.padStart(2,'0')}-${d.padStart(2,'0')}T${t.length===5?t+":00":t}${tzPart}`;
     return formatSafe(iso, tz);
   }
 
-  // ✅ 3. US MM/DD/YYYY
+  // 3. US MM/DD/YYYY
   match = input.match(/^(\d{1,2})\/(\d{1,2})\/(\d{4})(?:[ ,]+(\d{1,2}:\d{2}(?::\d{2})?))?(.*)$/);
   if (match) {
-    let [ , m, d, y, t = "00:00:00", tzPart = "" ] = match;
+    let [, m, d, y, t = "00:00:00", tzPart = ""] = match;
     const iso = `${y}-${m.padStart(2,'0')}-${d.padStart(2,'0')}T${t.length===5?t+":00":t}${tzPart}`;
     return formatSafe(iso, tz);
   }
 
-  // ✅ 4. ISO-style (with T, Z, offsets)
-  match = input.match(/^(\d{4}-\d{1,2}-\d{1,2})[ T](\d{1,2}:\d{2}(?::\d{2})?)(Z|[+-]\d{2}:?\d{2})?$/);
+  // 4. ISO YYYY-MM-DD with optional Z/+offset
+  match = input.match(/^(\d{4})-(0[1-9]|1[0-2])-(0[1-9]|[12]\d|3[01])[ T](\d{1,2}:\d{2}(?::\d{2})?)(Z|[+-]\d{2}:?\d{2})?$/);
   if (match) {
-    let [ , ymd, time, offset = "" ] = match;
-    // normalize to YYYY-MM-DD
-    let [y, m, d] = ymd.split('-').map(x => x.padStart(2,'0'));
+    let [, y, m, d, time, offset = ""] = match;
     const iso = `${y}-${m}-${d}T${time.length===5?time+":00":time}${offset}`;
     return formatSafe(iso, tz);
   }
 
-  // ✅ 5. RFC2822 / "25 Aug 2025 13:45:22 +0200"
+  // 5. RFC2822 / "25 Aug 2025 13:45:22 +0200"
   match = input.match(/^\d{1,2} [A-Za-z]{3,} \d{4}/);
   if (match) {
     return formatSafe(input, tz);
   }
 
-  // ✅ 6. Fallback (whatever Date() can parse)
+  // 6. DD-MM-YYYY with optional time
+  match = input.match(/^(\d{1,2})-(\d{1,2})-(\d{4})(?:[ T](\d{1,2}:\d{2}(?::\d{2})?))?$/);
+  if (match) {
+    let [, d, m, y, time = "00:00:00"] = match;
+    const iso = `${y}-${m.padStart(2,'0')}-${d.padStart(2,'0')}T${time.length===5?time+":00":time}`;
+    return formatSafe(iso, tz);
+  }
+
+  // 7. Strict YYYY-DD-MM with optional time
+  match = input.match(/^(\d{4})-(0[1-9]|[12]\d|3[01])-(0[1-9]|1[0-2])(?:[ T](\d{1,2}:\d{2}(?::\d{2})?))?$/);
+  if (match) {
+    let [, y, d, m, time = "00:00:00"] = match;
+    const iso = `${y}-${m}-${d}T${time.length === 5 ? time + ":00" : time}`;
+    return formatSafe(iso, tz);
+  }
+
+  // 8. Fallback
   return formatSafe(input, tz);
 
   function formatSafe(str, tz) {
@@ -440,6 +454,7 @@ function localizeTimestamp(input) {
 }
 
 
+
 // ----------------------------------------------------
 /**
  * Replaces double quotes within single-quoted strings, then converts all single quotes to double quotes,
@@ -1629,7 +1644,7 @@ async function executeOnce() {
       await cacheSettings();
       await cacheStrings();
 
-      console.log("✅ All AJAX callbacks have completed");
+      console.log("All AJAX callbacks have completed");
       onAllCallsComplete();
     } catch (error) {
       console.error("Error:", error);

front/network.php

@@ -1,26 +1,26 @@
 <?php
   require 'php/templates/header.php';
-  require 'php/templates/modals.php';  
+  require 'php/templates/modals.php';
 ?>
-    
+
 <script>
   // show spinning icon
   showSpinner()
-</script>  
+</script>
 
 <!-- Page ------------------------------------------------------------------ -->
 <div class="content-wrapper">
-  <span class="helpIcon"> 
+  <span class="helpIcon">
     <a target="_blank" href="https://github.com/jokob-sk/NetAlertX/blob/main/docs/NETWORK_TREE.md">
       <i class="fa fa-circle-question"></i>
     </a>
   </span>
 
-  <div id="toggleFilters" class="">    
+  <div id="toggleFilters" class="">
       <div class="checkbox icheck col-xs-12">
         <label>
           <input type="checkbox" name="showOffline" checked>
-            <div style="margin-left: 10px; display: inline-block; vertical-align: top;"> 
+            <div style="margin-left: 10px; display: inline-block; vertical-align: top;">
               <?= lang('Network_ShowOffline');?>
               <span id="showOfflineNumber">
                 <!-- placeholder -->
@@ -31,14 +31,14 @@
       <div class="checkbox icheck col-xs-12">
         <label>
           <input type="checkbox" name="showArchived">
-            <div style="margin-left: 10px; display: inline-block; vertical-align: top;"> 
-              <?= lang('Network_ShowArchived');?> 
+            <div style="margin-left: 10px; display: inline-block; vertical-align: top;">
+              <?= lang('Network_ShowArchived');?>
               <span id="showArchivedNumber">
                 <!-- placeholder -->
               </span>
             </div>
-        </label>      
-      </div>    
+        </label>
+      </div>
   </div>
 
   <div id="networkTree" class="drag">
@@ -55,8 +55,8 @@
     </div>
     <div class="tab-content">
       <!-- Placeholder -->
-    </div>    
-  </section>  
+    </div>
+  </section>
   <section id="unassigned-devices-wrapper">
       <!-- Placeholder -->
     </section>
@@ -69,7 +69,7 @@
   require 'php/templates/footer.php';
 ?>
 
-<script src="lib/treeviz/bundle.js"></script> 
+<script src="lib/treeviz/bundle.js"></script>
 
 <script defer>
 
@@ -78,12 +78,12 @@
 
     // Create Top level tabs   (List of network devices), explanation of the terminology below:
     //
-    //             Switch 1 (node) 
+    //             Switch 1 (node)
     //              /(p1)    \ (p2)     <----- port numbers
     //             /          \
     //   Smart TV (leaf)      Switch 2 (node (for the PC) and leaf (for Switch 1))
     //                          \
-    //                          PC (leaf) <------- leafs are not included in this SQL query 
+    //                          PC (leaf) <------- leafs are not included in this SQL query
     const rawSql = `
       SELECT node_name, node_mac, online, node_type, node_ports_count, parent_mac, node_icon, node_alert
       FROM (
@@ -120,7 +120,7 @@
 
       const portLabel = node.node_ports_count ? ` (${node.node_ports_count})` : '';
       const icon = atob(node.node_icon);
-      const id = node.node_mac.replace(/:/g, '_');      
+      const id = node.node_mac.replace(/:/g, '_');
 
       html += `
         <li class="networkNodeTabHeaders ${i === 0 ? 'active' : ''}">
@@ -137,13 +137,13 @@
     renderNetworkTabContent(nodes);
 
     // init selected (first) tab
-    initTab();  
+    initTab();
 
-    // init selected node highlighting 
+    // init selected node highlighting
     initSelectedNodeHighlighting()
 
     // Register events on tab change
-    $('a[data-toggle="tab"]').on('shown.bs.tab', function (e) {   
+    $('a[data-toggle="tab"]').on('shown.bs.tab', function (e) {
       initSelectedNodeHighlighting()
     });
   }
@@ -205,10 +205,10 @@
                   <hr/>
                   <div class="box box-aqua box-body" id="connected">
                     <h5>
-                      <i class="fa fa-sitemap fa-rotate-270"></i> 
+                      <i class="fa fa-sitemap fa-rotate-270"></i>
                       ${getString('Network_Connected')}
                     </h5>
-                    
+
                     <div id="leafs_${id}" class="table-responsive"></div>
                   </div>
                 </div>
@@ -234,9 +234,9 @@
         return;
       }
 
-      
+
       $container.html(wrapperHtml);
-      
+
       const $table = $(`#${tableId}`);
 
       const columns = [
@@ -298,7 +298,7 @@
           title: getString('Device_TableHead_Vendor'),
           data: 'devVendor',
           width: '20%'
-        }        
+        }
       ].filter(Boolean);
 
 
@@ -356,7 +356,7 @@
   function loadConnectedDevices(node_mac) {
     const sql = `
       SELECT devName, devMac, devLastIP, devVendor, devPresentLastScan, devAlertDown, devParentPort,
-        CASE 
+        CASE
             WHEN devIsNew = 1 THEN 'New'
             WHEN devPresentLastScan = 1 THEN 'On-line'
             WHEN devPresentLastScan = 0 AND devAlertDown != 0 THEN 'Down'
@@ -371,7 +371,7 @@
 
     const wrapperHtml = `
       <table class="table table-bordered table-striped node-leafs-table " id="table_leafs_${id}" data-node-mac="${node_mac}">
-            
+
       </table>`;
 
     loadDeviceTable({
@@ -414,12 +414,12 @@
   $.get(apiUrl, function (data) {
 
     console.log(data);
-    
+
     const parsed = JSON.parse(data);
     const allDevices = parsed;
 
     console.log(allDevices);
-    
+
 
     if (!allDevices || allDevices.length === 0) {
       showModalOK(getString('Gen_Warning'), getString('Network_NoDevices'));
@@ -439,7 +439,7 @@
     {
       $('#showArchivedNumber').text(`(${archivedCount})`);
     }
-    
+
     if(offlineCount > 0)
     {
       $('#showOfflineNumber').text(`(${offlineCount})`);
@@ -501,7 +501,7 @@ var visibleNodesCount = 0;
 var parentNodesCount = 0;
 var hiddenMacs = []; // hidden children
 var hiddenChildren = [];
-var deviceListGlobal = null; 
+var deviceListGlobal = null;
 
 // ---------------------------------------------------------------------------
 // Recursively get children nodes and build a tree
@@ -521,13 +521,17 @@ function getChildren(node, list, path, visited = [])
 
     // Loop through all items to find children of the current node
     for (var i in list) {
-        if (list[i].devParentMAC.toLowerCase() == node.devMac.toLowerCase() && !hiddenMacs.includes(list[i].devParentMAC)) {   
+      const item = list[i];
+      const parentMac = item.devParentMAC || "";       // null-safe
+      const nodeMac = node.devMac || "";               // null-safe
 
-            visibleNodesCount++;
+      if (parentMac != "" && parentMac.toLowerCase() == nodeMac.toLowerCase() && !hiddenMacs.includes(parentMac)) {
 
-            // Process children recursively, passing a copy of the visited list
-            children.push(getChildren(list[i], list, path + ((path == "") ? "" : '|') + list[i].devParentMAC, visited));
-        }
+        visibleNodesCount++;
+
+        // Process children recursively, passing a copy of the visited list
+        children.push(getChildren(list[i], list, path + ((path == "") ? "" : '|') + parentMac, visited));
+      }
     }
 
     // Track leaf and parent node counts
@@ -537,7 +541,7 @@ function getChildren(node, list, path, visited = [])
         parentNodesCount++;
     }
 
-    return { 
+    return {
         name: node.devName,
         path: path,
         mac: node.devMac,
@@ -562,19 +566,32 @@ function getChildren(node, list, path, visited = [])
     };
 }
 
-// ---------------------------------------------------------------------------  
+// ---------------------------------------------------------------------------
 function getHierarchy()
-{ 
+{
+  let internetNode = null;
+
   for(i in deviceListGlobal)
-  {      
+  {
     if(deviceListGlobal[i].devMac == 'Internet')
-    { 
-      return (getChildren(deviceListGlobal[i], deviceListGlobal, ''))
+    {
+      internetNode = deviceListGlobal[i];
+
+      return (getChildren(internetNode, deviceListGlobal, ''))
       break;
     }
   }
+
+  if (!internetNode) {
+    showModalOk(
+      getString('Network_Configuration_Error'),
+      getString('Network_Root_Not_Configured')
+    );
+    console.error("getHierarchy(): Internet node not found");
+    return null;
+  }
 }
-  
+
 //---------------------------------------------------------------------------
 function toggleSubTree(parentMac, treePath)
 {
@@ -593,33 +610,33 @@ function toggleSubTree(parentMac, treePath)
   myTree.refresh(updatedTree);
 
   // re-attach any onclick events
-  attachTreeEvents();   
+  attachTreeEvents();
 }
 
-// --------------------------------------------------------------------------- 
+// ---------------------------------------------------------------------------
 function attachTreeEvents()
 {
   //  toggle subtree functionality
   $("div[data-mytreemac]").each(function(){
-      $(this).attr('onclick', 'toggleSubTree("'+$(this).attr('data-mytreemac')+'","'+ $(this).attr('data-mytreepath')+'")')        
-  }); 
+      $(this).attr('onclick', 'toggleSubTree("'+$(this).attr('data-mytreemac')+'","'+ $(this).attr('data-mytreepath')+'")')
+  });
 }
 
-// --------------------------------------------------------------------------- 
+// ---------------------------------------------------------------------------
 // Handle network node click - select correct tab in the bottom table
 function handleNodeClick(el)
-{    
+{
 
   isNetworkDevice = $(el).data("devisnetworknodedynamic") == 1;
   targetTabMAC = ""
-  thisDevMac= $(el).data("mac"); 
-  
+  thisDevMac= $(el).data("mac");
+
   if (isNetworkDevice == false)
   {
-    targetTabMAC = $(el).data("parentmac");   
+    targetTabMAC = $(el).data("parentmac");
   } else
   {
-    targetTabMAC = thisDevMac;  
+    targetTabMAC = thisDevMac;
   }
 
   var targetTab = $(`a[data-mytabmac="${targetTabMAC}"]`);
@@ -628,8 +645,8 @@ function handleNodeClick(el)
     // Simulate a click event on the target tab
     targetTab.click();
 
-    
-  } 
+
+  }
 
   if (isNetworkDevice) {
     // Smooth scroll to the tab content
@@ -639,7 +656,7 @@ function handleNodeClick(el)
   }  else {
     $("tr.selected").removeClass("selected");
     $(`tr[data-mac="${thisDevMac}"]`).addClass("selected");
-  
+
     const tableId = "table_leafs_" + targetTabMAC.replace(/:/g, '_');
     const $table = $(`#${tableId}`).DataTable();
 
@@ -669,10 +686,8 @@ function handleNodeClick(el)
   }
 }
 
-// --------------------------------------------------------------------------- 
+// ---------------------------------------------------------------------------
 var myTree;
-
-
 var emSize;
 var nodeHeight;
 // var sizeCoefficient = 1.4
@@ -689,140 +704,139 @@ function emToPx(em, element) {
 
 function initTree(myHierarchy)
 {
-  // calculate the drawing area based on teh tree width and available screen size
-  
-  let baseFontSize = parseFloat($('html').css('font-size')); 
-  let treeAreaHeight = ($(window).height() - 155); ;
-  // calculate the font size of the leaf nodes to fit everything into the tree area
-  leafNodesCount == 0 ? 1 : leafNodesCount;
-
-  emSize = pxToEm((treeAreaHeight/(leafNodesCount)).toFixed(2));
-  
-  let screenWidthEm = pxToEm($('.networkTable').width()-15);
-
-  // init the drawing area size
-  $("#networkTree").attr('style', `height:${treeAreaHeight}px; width:${emToPx(screenWidthEm)}px`)
-
-  if(myHierarchy.type == "")
+  if(myHierarchy && myHierarchy.type !== "")
   {
-    showModalOk(getString('Network_Configuration_Error'), getString('Network_Root_Not_Configured'))      
-    
-    return;
+    // calculate the drawing area based on the tree width and available screen size
+    let baseFontSize = parseFloat($('html').css('font-size'));
+    let treeAreaHeight = ($(window).height() - 155); ;
+
+    // calculate the font size of the leaf nodes to fit everything into the tree area
+    leafNodesCount == 0 ? 1 : leafNodesCount;
+
+    emSize = pxToEm((treeAreaHeight/(leafNodesCount)).toFixed(2));
+
+    let screenWidthEm = pxToEm($('.networkTable').width()-15);
+
+    // init the drawing area size
+    $("#networkTree").attr('style', `height:${treeAreaHeight}px; width:${emToPx(screenWidthEm)}px`)
+
+    // handle canvas and node size if only a few nodes
+    emSize > 1 ? emSize = 1 : emSize = emSize;
+
+    let nodeHeightPx = emToPx(emSize*1);
+    let nodeWidthPx = emToPx(screenWidthEm / (parentNodesCount));
+
+    // handle if only a few nodes
+    nodeWidthPx > 160 ? nodeWidthPx = 160 : nodeWidthPx = nodeWidthPx;
+
+    console.log(Treeviz);
+
+    myTree = Treeviz.create({
+      htmlId: "networkTree",
+      renderNode:  nodeData =>  {
+
+        (!emptyArr.includes(nodeData.data.port )) ? port =  nodeData.data.port : port = "";
+
+        (port == "" || port == 0 || port == 'None' ) ? portBckgIcon = `<i class="fa fa-wifi"></i>` : portBckgIcon = `<i class="fa fa-ethernet"></i>`;
+
+        portHtml = (port == "" || port == 0 || port == 'None' ) ? " &nbsp " : port;
+
+        // Build HTML for individual nodes in the network diagram
+        deviceIcon = (!emptyArr.includes(nodeData.data.icon )) ?
+                  `<div class="netIcon">
+                        ${atob(nodeData.data.icon)}
+                  </div>` : "";
+        devicePort = `<div  class="netPort"
+                            style="width:${emSize}em;height:${emSize}em">
+                        ${portHtml}</div>
+                      <div  class="portBckgIcon"
+                            style="margin-left:-${emSize*0.7}em;">
+                            ${portBckgIcon}
+                      </div>`;
+        collapseExpandIcon = nodeData.data.hiddenChildren ?
+                            "square-plus" : "square-minus";
+
+        // generate +/- icon if node has children nodes
+        collapseExpandHtml = nodeData.data.hasChildren ?
+                      `<div class="netCollapse"
+                            style="font-size:${nodeHeightPx/2}px;top:${Math.floor(nodeHeightPx / 4)}px"
+                            data-mytreepath="${nodeData.data.path}"
+                            data-mytreemac="${nodeData.data.mac}">
+                        <i class="fa fa-${collapseExpandIcon} pointer"></i>
+                      </div>` : "";
+
+        selectedNodeMac = $(".nav-tabs-custom .active a").attr('data-mytabmac')
+
+        highlightedCss = nodeData.data.mac == selectedNodeMac ?
+                      " highlightedNode " : "";
+        cssNodeType = nodeData.data.devIsNetworkNodeDynamic  ?
+                      " node-network-device " : " node-standard-device ";
+
+        networkHardwareIcon = nodeData.data.devIsNetworkNodeDynamic ? `<span class="network-hw-icon">
+                                  <i class="fa-solid fa-hard-drive"></i>
+                              </span>` : "";
+
+        const badgeConf = getStatusBadgeParts(nodeData.data.presentLastScan, nodeData.data.alertDown, nodeData.data.mac, statusText = '')
+
+        return result = `<div
+                              class="node-inner hover-node-info box pointer ${highlightedCss} ${cssNodeType}"
+                              style="height:${nodeHeightPx}px;font-size:${nodeHeightPx-5}px;"
+                              onclick="handleNodeClick(this)"
+                              data-mac="${nodeData.data.mac}"
+                              data-parentMac="${nodeData.data.parentMac}"
+                              data-name="${nodeData.data.name}"
+                              data-ip="${nodeData.data.ip}"
+                              data-mac="${nodeData.data.mac}"
+                              data-vendor="${nodeData.data.vendor}"
+                              data-type="${nodeData.data.type}"
+                              data-devIsNetworkNodeDynamic="${nodeData.data.devIsNetworkNodeDynamic}"
+                              data-lastseen="${nodeData.data.lastseen}"
+                              data-firstseen="${nodeData.data.firstseen}"
+                              data-relationship="${nodeData.data.relType}"
+                              data-status="${nodeData.data.status}"
+                              data-present="${nodeData.data.presentLastScan}"
+                              data-alert="${nodeData.data.alertDown}"
+                              data-icon="${nodeData.data.icon}"
+                          >
+                            <div class="netNodeText">
+                              <strong><span>${devicePort}  <span class="${badgeConf.cssText}">${deviceIcon}</span></span>
+                                <span class="spanNetworkTree anonymizeDev" style="width:${nodeWidthPx-50}px">${nodeData.data.name}</span>
+                                ${networkHardwareIcon}
+                              </strong>
+                            </div>
+                          </div>
+                          ${collapseExpandHtml}`;
+      },
+      mainAxisNodeSpacing: 'auto',
+      // secondaryAxisNodeSpacing: 0.3,
+      nodeHeight: nodeHeightPx,
+      nodeWidth: nodeWidthPx,
+      marginTop: '5',
+      isHorizontal : true,
+      hasZoom: true,
+      hasPan: true,
+      marginLeft: '10',
+      marginRight: '10',
+      idKey: "mac",
+      hasFlatData: false,
+      relationnalField: "children",
+      linkWidth: (nodeData) => 2,
+      linkColor: (nodeData) => {
+        relConf = getRelationshipConf(nodeData.data.relType)
+        return relConf.color;
+      }
+      // onNodeClick: (nodeData) => handleNodeClick(nodeData),
+    });
+
+    console.log(deviceListGlobal);
+    myTree.refresh(myHierarchy);
+
+    // hide spinning icon
+    hideSpinner()
+  } else
+  {
+    console.error("getHierarchy() not returning expected result");
   }
-
-  // handle canvas and node size if only a few nodes
-  emSize > 1 ? emSize = 1 : emSize = emSize;
-
-  let nodeHeightPx = emToPx(emSize*1);
-  let nodeWidthPx = emToPx(screenWidthEm / (parentNodesCount));
-
-  // handle if only a few nodes
-  nodeWidthPx > 160 ? nodeWidthPx = 160 : nodeWidthPx = nodeWidthPx;
-
-  console.log(Treeviz);
-
-  myTree = Treeviz.create({
-    htmlId: "networkTree",
-    renderNode:  nodeData =>  {
-      
-      (!emptyArr.includes(nodeData.data.port )) ? port =  nodeData.data.port : port = "";
-
-      (port == "" || port == 0 || port == 'None' ) ? portBckgIcon = `<i class="fa fa-wifi"></i>` : portBckgIcon = `<i class="fa fa-ethernet"></i>`;
-
-      portHtml = (port == "" || port == 0 || port == 'None' ) ? " &nbsp " : port;
-      
-      // Build HTML for individual nodes in the network diagram        
-      deviceIcon = (!emptyArr.includes(nodeData.data.icon )) ?  
-                `<div class="netIcon">
-                      ${atob(nodeData.data.icon)}
-                </div>` : "";
-      devicePort = `<div  class="netPort" 
-                          style="width:${emSize}em;height:${emSize}em">
-                      ${portHtml}</div> 
-                    <div  class="portBckgIcon" 
-                          style="margin-left:-${emSize*0.7}em;">
-                          ${portBckgIcon}
-                    </div>`;
-      collapseExpandIcon = nodeData.data.hiddenChildren ? 
-                          "square-plus" : "square-minus";
-                          
-      // generate +/- icon if node has children nodes
-      collapseExpandHtml = nodeData.data.hasChildren ? 
-                    `<div class="netCollapse" 
-                          style="font-size:${nodeHeightPx/2}px;top:${Math.floor(nodeHeightPx / 4)}px" 
-                          data-mytreepath="${nodeData.data.path}" 
-                          data-mytreemac="${nodeData.data.mac}">
-                      <i class="fa fa-${collapseExpandIcon} pointer"></i>
-                    </div>` : "";
-
-      selectedNodeMac = $(".nav-tabs-custom .active a").attr('data-mytabmac')
-
-      highlightedCss = nodeData.data.mac == selectedNodeMac ? 
-                    " highlightedNode " : "";
-      cssNodeType = nodeData.data.devIsNetworkNodeDynamic  ? 
-                    " node-network-device " : " node-standard-device ";
-
-      networkHardwareIcon = nodeData.data.devIsNetworkNodeDynamic ? `<span class="network-hw-icon">
-                                <i class="fa-solid fa-hard-drive"></i>
-                            </span>` : "";
-
-      const badgeConf = getStatusBadgeParts(nodeData.data.presentLastScan, nodeData.data.alertDown, nodeData.data.mac, statusText = '')
-
-      return result = `<div 
-                            class="node-inner hover-node-info box pointer ${highlightedCss} ${cssNodeType}"
-                            style="height:${nodeHeightPx}px;font-size:${nodeHeightPx-5}px;"
-                            onclick="handleNodeClick(this)"
-                            data-mac="${nodeData.data.mac}"                            
-                            data-parentMac="${nodeData.data.parentMac}"                            
-                            data-name="${nodeData.data.name}"
-                            data-ip="${nodeData.data.ip}"
-                            data-mac="${nodeData.data.mac}"
-                            data-vendor="${nodeData.data.vendor}"
-                            data-type="${nodeData.data.type}"
-                            data-devIsNetworkNodeDynamic="${nodeData.data.devIsNetworkNodeDynamic}"
-                            data-lastseen="${nodeData.data.lastseen}"
-                            data-firstseen="${nodeData.data.firstseen}"
-                            data-relationship="${nodeData.data.relType}"
-                            data-status="${nodeData.data.status}"
-                            data-present="${nodeData.data.presentLastScan}"
-                            data-alert="${nodeData.data.alertDown}"
-                            data-icon="${nodeData.data.icon}"
-                        >
-                          <div class="netNodeText">
-                            <strong><span>${devicePort}  <span class="${badgeConf.cssText}">${deviceIcon}</span></span>
-                              <span class="spanNetworkTree anonymizeDev" style="width:${nodeWidthPx-50}px">${nodeData.data.name}</span>
-                              ${networkHardwareIcon}
-                            </strong>                            
-                          </div>                          
-                        </div>
-                        ${collapseExpandHtml}`;
-    },
-    mainAxisNodeSpacing: 'auto',
-    // secondaryAxisNodeSpacing: 0.3,
-    nodeHeight: nodeHeightPx,
-    nodeWidth: nodeWidthPx,
-    marginTop: '5',
-    isHorizontal : true,
-    hasZoom: true,
-    hasPan: true,
-    marginLeft: '10',
-    marginRight: '10',
-    idKey: "mac",
-    hasFlatData: false,
-    relationnalField: "children",
-    linkWidth: (nodeData) => 2,
-    linkColor: (nodeData) => {  
-      relConf = getRelationshipConf(nodeData.data.relType)  
-      return relConf.color;
-    }
-    // onNodeClick: (nodeData) => handleNodeClick(nodeData),
-  });      
-
-  console.log(deviceListGlobal);
-  myTree.refresh(myHierarchy);
-
-  // hide spinning icon
-  hideSpinner()
 }
 
 
@@ -839,11 +853,11 @@ function initTab()
   selectedTab = "Internet_id"
 
   // the #target from the url
-  target = getQueryString('mac') 
+  target = getQueryString('mac')
 
   // update cookie if target specified
   if(target != "")
-  {      
+  {
     setCache(key, target.replaceAll(":","_")+'_id') // _id is added so it doesn't conflict with AdminLTE tab behavior
   }
 
@@ -860,12 +874,12 @@ function initTab()
   $('a[data-toggle="tab"]').on('shown.bs.tab', function (e) {
     setCache(key, $(e.target).attr('id'))
   });
-  
+
 }
 
 // ---------------------------------------------------------------------------
 function initSelectedNodeHighlighting()
-{ 
+{
 
   var currentNodeMac = $(".networkNodeTabHeaders.active a").data("mytabmac");
 
@@ -882,7 +896,7 @@ function initSelectedNodeHighlighting()
   newSelNode = $("#networkTree div[data-mac='"+currentNodeMac+"']")[0]
 
   console.log(newSelNode)
-  
+
   $(newSelNode).attr('class',  $(newSelNode).attr('class') + ' highlightedNode')
 }
 
@@ -913,7 +927,7 @@ function updateLeaf(leafMac, action) {
 }
 
 // ---------------------------------------------------------------------------
-// showing icons or device names in tabs depending on available screen size 
+// showing icons or device names in tabs depending on available screen size
 function checkTabsOverflow() {
   const $ul = $('.nav-tabs');
   const $lis = $ul.find('li');

front/php/server/util.php

@@ -1,7 +1,7 @@
 <?php
 //------------------------------------------------------------------------------
 //  NetAlertX
-//  Open Source Network Guard / WIFI & LAN intrusion detector 
+//  Open Source Network Guard / WIFI & LAN intrusion detector
 //
 //  util.php - Front module. Server side. Common generic functions
 //------------------------------------------------------------------------------
@@ -22,8 +22,8 @@ $ACTION   = "";
 
 // init request params
 if(array_key_exists('function', $_REQUEST) != FALSE)
-{  
-  $FUNCTION = $_REQUEST['function']; 
+{
+  $FUNCTION = $_REQUEST['function'];
 }
 if(array_key_exists('settings', $_REQUEST) != FALSE)
 {
@@ -33,13 +33,13 @@ if(array_key_exists('settings', $_REQUEST) != FALSE)
 
 // call functions based on requested params
 switch ($FUNCTION) {
-  
+
   case 'savesettings':
-      
+
       saveSettings();
       break;
 
-  case 'cleanLog':      
+  case 'cleanLog':
 
       cleanLog($SETTINGS);
       break;
@@ -66,7 +66,7 @@ switch ($FUNCTION) {
 // Creates a PHP array from a string representing a python array (input format ['...','...'])
 // Only supports:
 //      - one level arrays, not nested ones
-//      - single quotes 
+//      - single quotes
 function createArray($input){
 
   // empty array
@@ -81,9 +81,9 @@ function createArray($input){
   $replacement = '';
 
   // remove brackets
-  $noBrackets = preg_replace($patternBrackets, $replacement, $input); 
-  
-  $options = array(); 
+  $noBrackets = preg_replace($patternBrackets, $replacement, $input);
+
+  $options = array();
 
   // create array
   $optionsTmp = explode(",", $noBrackets);
@@ -99,7 +99,7 @@ function createArray($input){
   {
     array_push($options, preg_replace($patternQuotes, $replacement, $item) );
   }
-  
+
   return $options;
 }
 
@@ -117,7 +117,7 @@ function printArray ($array) {
     {
       echo $val.', ';
     }
-  }  
+  }
   echo ']<br/>';
 }
 
@@ -171,9 +171,9 @@ function checkPermissions($files)
     if(file_exists($file) != 1)
     {
       $message = "File '".$file."' not found or inaccessible. Correct file permissions, create one yourself or generate a new one in 'Settings' by clicking the 'Save' button.";
-      displayMessage($message, TRUE);      
+      displayMessage($message, TRUE);
     }
-  } 
+  }
 }
 
 // ----------------------------------------------------------------------------------------
@@ -189,8 +189,8 @@ function displayMessage($message, $logAlert = FALSE, $logConsole = TRUE, $logFil
   $message = str_replace(array("\n", "\r", PHP_EOL), '', $message);
 
   echo "<script>function escape(html, encode) {
-    return html.replace(!encode ? /&(?!#?\w+;)/g : /&/g, '&amp;')  
-      .replace(/\t/g, '')    
+    return html.replace(!encode ? /&(?!#?\w+;)/g : /&/g, '&amp;')
+      .replace(/\t/g, '')
   }</script>";
 
   // Javascript Alert pop-up
@@ -210,7 +210,7 @@ function displayMessage($message, $logAlert = FALSE, $logConsole = TRUE, $logFil
   {
 
     if (is_writable($logFolderPath.$log_file)) {
-        
+
 
         if(file_exists($logFolderPath.$log_file) != 1) // file doesn't exist, create one
         {
@@ -219,7 +219,7 @@ function displayMessage($message, $logAlert = FALSE, $logConsole = TRUE, $logFil
         {
           $log = fopen($logFolderPath.$log_file, "a") or die("Unable to open file - Permissions issue!");
         }
-    
+
         fwrite($log, "[".$timestamp. "] " . str_replace('<br>',"\n   ",str_replace('<br/>',"\n   ",$message)).PHP_EOL."" );
         fclose($log);
 
@@ -269,13 +269,13 @@ function addToExecutionQueue($action)
 // equivalent: /logs DELETE
 // 🔺----- API ENDPOINTS SUPERSEDED -----🔺
 function cleanLog($logFile)
-{  
+{
   global $logFolderPath, $timestamp;
 
   $path = "";
 
   $allowedFiles = ['app.log', 'app_front.log', 'IP_changes.log', 'stdout.log', 'stderr.log', 'app.php_errors.log', 'execution_queue.log', 'db_is_locked.log', 'nginx-error.log', 'cron.log'];
-  
+
   if(in_array($logFile, $allowedFiles))
   {
     $path = $logFolderPath.$logFile;
@@ -287,11 +287,11 @@ function cleanLog($logFile)
     $file = fopen($path, "w") or die("Unable to open file!");
     fwrite($file, "");
     fclose($file);
-    displayMessage('File <code>'.$logFile.'</code> purged.', FALSE, TRUE, TRUE, TRUE);      
+    displayMessage('File <code>'.$logFile.'</code> purged.', FALSE, TRUE, TRUE, TRUE);
   } else
   {
-    displayMessage('File <code>'.$logFile.'</code> is not allowed to be purged.', FALSE, TRUE, TRUE, TRUE);      
-  } 
+    displayMessage('File <code>'.$logFile.'</code> is not allowed to be purged.', FALSE, TRUE, TRUE, TRUE);
+  }
 }
 
 
@@ -299,23 +299,23 @@ function cleanLog($logFile)
 // ----------------------------------------------------------------------------------------
 function saveSettings()
 {
-  global $SETTINGS, $FUNCTION, $config_file, $fullConfPath, $configFolderPath, $timestamp;   
+  global $SETTINGS, $FUNCTION, $config_file, $fullConfPath, $configFolderPath, $timestamp;
 
   // save to the file
   $new_name = $config_file.'_'.$timestamp.'.backup';
-  $new_location = $configFolderPath.$new_name;
+  $new_location = $configFolderPath.'/'.$new_name;
 
   if(file_exists( $fullConfPath) != 1)
-  {    
-    displayMessage('File "'.$fullConfPath.'" not found or missing read permissions. Creating a new <code>'.$config_file.'</code> file.', FALSE, TRUE, TRUE, TRUE);      
+  {
+    displayMessage('File "'.$fullConfPath.'" not found or missing read permissions. Creating a new <code>'.$config_file.'</code> file.', FALSE, TRUE, TRUE, TRUE);
   }
-  // create a backup copy    
+  // create a backup copy
   elseif (!copy($fullConfPath, $new_location))
-  {      
-    displayMessage("Failed to copy file ".$fullConfPath." to ".$new_location." <br/> Check your permissions to allow read/write access to the /config folder.", FALSE, TRUE, TRUE, TRUE);      
+  {
+    displayMessage("Failed to copy file ".$fullConfPath." to ".$new_location." <br/> Check your permissions to allow read/write access to the /config folder.", FALSE, TRUE, TRUE, TRUE);
   }
-  
-       
+
+
   // generate a clean .conf file
   $groups = [];
 
@@ -339,12 +339,12 @@ function saveSettings()
       return;
   }
 
-  foreach ($decodedSettings as $setting) { 
+  foreach ($decodedSettings as $setting) {
     if( in_array($setting[0] , $groups) == false) {
       array_push($groups ,$setting[0]);
     }
   }
-  
+
   // go thru the groups and prepare settings to write to file
   foreach ($groups as $group) {
     $txt .= "\n\n# " . $group;
@@ -353,20 +353,20 @@ function saveSettings()
     foreach ($decodedSettings as $setting) {
       $settingGroup = $setting[0];
       $setKey   = $setting[1];
-      $dataType     = $setting[2]; 
+      $dataType     = $setting[2];
       $settingValue = $setting[3];
-  
+
       // // Parse the settingType JSON
       // $settingType = json_decode($settingTypeJson, true);
-  
+
       // Sanity check
       if($setKey == "UI_LANG" && $settingValue == "") {
           echo "🔴 Error: important settings missing. Refresh the page with 🔃 on the top and try again.";
           return;
       }
-  
-      if ($group == $settingGroup) {          
-  
+
+      if ($group == $settingGroup) {
+
           if ($dataType == 'string' ) {
               $val = encode_single_quotes($settingValue);
               $txt .= $setKey . "='" . $val . "'\n";
@@ -381,7 +381,7 @@ function saveSettings()
               $txt .= $setKey . "=" . $val . "\n";
           } elseif ($dataType == 'array' ) {
               $temp = '';
-              
+
               if(is_array($settingValue) == FALSE)
               {
                 $settingValue =  json_decode($settingValue);
@@ -397,22 +397,22 @@ function saveSettings()
 
               $temp = '['.$temp.']'; // wrap brackets
               $txt .= $setKey . "=" . $temp . "\n";
- 
+
           } else  {
               $txt .= $setKey . "='⭕Not handled⭕'\n";
           }
       }
   }
-  
+
   }
 
   $txt = $txt."\n\n";
   $txt = $txt."#-------------------IMPORTANT INFO-------------------#\n";
-  $txt = $txt."#   This file is ingested by a python script, so if  #\n";      
-  $txt = $txt."#        modified it needs to use python syntax      #\n";      
+  $txt = $txt."#   This file is ingested by a python script, so if  #\n";
+  $txt = $txt."#        modified it needs to use python syntax      #\n";
   $txt = $txt."#-------------------IMPORTANT INFO-------------------#\n";
 
-  // open new file and write the new configuration      
+  // open new file and write the new configuration
   // Create a temporary file
   $tempConfPath = $fullConfPath . ".tmp";
 
@@ -426,8 +426,8 @@ function saveSettings()
   fwrite($file, $txt);
   fclose($file);
 
-  // displayMessage(lang('settings_saved'), 
-  //   FALSE, TRUE, TRUE, TRUE);    
+  // displayMessage(lang('settings_saved'),
+  //   FALSE, TRUE, TRUE, TRUE);
 
   echo "OK";
 
@@ -445,7 +445,7 @@ function getString ($setKey, $default) {
   if ($result )
   {
     return $result;
-  }   
+  }
 
   return $default;
 }
@@ -520,14 +520,14 @@ function getDateFromPeriod () {
       $days = "3650"; //10 years
       break;
     default:
-      $days = "1";    
-  }  
+      $days = "1";
+  }
 
-  $periodDateSQL = "-".$days." day"; 
+  $periodDateSQL = "-".$days." day";
 
   return " date('now', '".$periodDateSQL."') ";
- 
-  // $period = $_REQUEST['period'];    
+
+  // $period = $_REQUEST['period'];
   // return '"'. date ('Y-m-d', strtotime ('+2 day -'. $period) ) .'"';
 }
 
@@ -537,13 +537,13 @@ function getDateFromPeriod () {
 function quotes ($text) {
   return str_replace ('"','""',$text);
 }
-    
+
 // -------------------------------------------------------------------------------------------
 function logServerConsole ($text) {
   $x = array();
   $y = $x['__________'. $text .'__________'];
 }
-    
+
 // -------------------------------------------------------------------------------------------
 function handleNull ($text, $default = "") {
   if($text == NULL || $text == 'NULL')
@@ -553,7 +553,7 @@ function handleNull ($text, $default = "") {
   {
     return $text;
   }
-  
+
 }
 
 // -------------------------------------------------------------------------------------------
@@ -581,14 +581,14 @@ function decodeSpecialChars($str) {
 // used in Export CSV
 function getDevicesColumns(){
 
-  $columns = ["devMac", 
+  $columns = ["devMac",
               "devName",
               "devOwner",
               "devType",
               "devVendor",
               "devFavorite",
               "devGroup",
-              "devComments", 
+              "devComments",
               "devFirstConnection",
               "devLastConnection",
               "devLastIP",
@@ -615,8 +615,8 @@ function getDevicesColumns(){
               "devFQDN",
               "devParentRelType",
               "devReqNicsOnline"
-            ]; 
-              
+            ];
+
   return $columns;
 }
 
@@ -646,7 +646,7 @@ function getCache($key) {
 }
 // -------------------------------------------------------------------------------------------
 function setCache($key, $value, $expireMinutes = 5) {
-  setcookie($key,  $value, time()+$expireMinutes*60, "/","", 0); 
+  setcookie($key,  $value, time()+$expireMinutes*60, "/","", 0);
 }
 
 

install/production-filesystem/entrypoint.d/95-appliance-integrity.sh

@@ -14,7 +14,7 @@ if ! awk '$2 == "/" && $4 ~ /ro/ {found=1} END {exit !found}' /proc/mounts; then
 ══════════════════════════════════════════════════════════════════════════════
 ⚠️  Warning: Container is running as read-write, not in read-only mode.
 
-    Please mount the root filesystem as --read-only or use read-only: true
+    Please mount the root filesystem as --read-only or use read_only: true
     https://github.com/jokob-sk/NetAlertX/blob/main/docs/docker-troubleshooting/read-only-filesystem.md
 ══════════════════════════════════════════════════════════════════════════════
 EOF