Translated using Weblate (Russian)

Currently translated at 99.7% (803 of 805 strings) Translation: NetAlertX/core Translate-URL: https://hosted.weblate.org/projects/pialert/core/ru/
Enhance scan ETA display logic to reload data for newly discovered devices after scanning finishes
2026-04-01 07:42:19 -07:00 · 2026-03-06 13:09:47 +00:00 · 2026-03-05 20:24:57 +00:00 · 2026-03-05 18:51:05 +11:00 · 2026-03-05 18:50:21 +11:00 · 2026-03-05 08:33:52 +01:00
26 changed files with 1166 additions and 218 deletions
--- a/docker-compose.yml
+++ b/docker-compose.yml
@@ -19,6 +19,9 @@ services:
      - CHOWN                                       # Required for root-entrypoint to chown /data + /tmp before dropping privileges
      - SETUID                                      # Required for root-entrypoint to switch to non-root user
      - SETGID                                      # Required for root-entrypoint to switch to non-root group                  
+    sysctls:                                        # ARP flux mitigation for host networking accuracy
+      net.ipv4.conf.all.arp_ignore: 1
+      net.ipv4.conf.all.arp_announce: 2
    volumes:

      - type: volume                                # Persistent Docker-managed Named Volume for storage
--- a/docs/DOCKER_COMPOSE.md
+++ b/docs/DOCKER_COMPOSE.md
@@ -30,6 +30,9 @@ services:
      - CHOWN                                       # Required for root-entrypoint to chown /data + /tmp before dropping privileges
      - SETUID                                      # Required for root-entrypoint to switch to non-root user
      - SETGID                                      # Required for root-entrypoint to switch to non-root group
+    sysctls:                                        # ARP flux mitigation (reduces duplicate/ambiguous ARP behavior on host networking)
+      net.ipv4.conf.all.arp_ignore: 1
+      net.ipv4.conf.all.arp_announce: 2

    volumes:
      - type: volume                                # Persistent Docker-managed named volume for config + database
--- a/docs/docker-troubleshooting/arp-flux-sysctls.md
+++ b/docs/docker-troubleshooting/arp-flux-sysctls.md
@@ -0,0 +1,51 @@
+# ARP Flux Sysctls Not Set
+
+## Issue Description
+
+NetAlertX detected that ARP flux protection sysctls are not set as expected:
+
+- `net.ipv4.conf.all.arp_ignore=1`
+- `net.ipv4.conf.all.arp_announce=2`
+
+## Security Ramifications
+
+This is not a direct container breakout risk, but detection quality can degrade:
+
+- Incorrect IP/MAC associations
+- Device state flapping
+- Unreliable topology or presence data
+
+## Why You're Seeing This Issue
+
+The running environment does not provide the expected kernel sysctl values. This is common in Docker setups where sysctls were not explicitly configured.
+
+## How to Correct the Issue
+
+Set these sysctls at container runtime.
+
+- In `docker-compose.yml` (preferred):
+  ```yaml
+  services:
+    netalertx:
+      sysctls:
+        net.ipv4.conf.all.arp_ignore: 1
+        net.ipv4.conf.all.arp_announce: 2
+  ```
+
+- For `docker run`:
+  ```bash
+  docker run \
+    --sysctl net.ipv4.conf.all.arp_ignore=1 \
+    --sysctl net.ipv4.conf.all.arp_announce=2 \
+    ghcr.io/netalertx/netalertx:latest
+  ```
+  
+> **Note:** Setting `net.ipv4.conf.all.arp_ignore` and `net.ipv4.conf.all.arp_announce` may fail with "operation not permitted" unless the container is run with elevated privileges. To resolve this, you can:
+> - Use `--privileged` with `docker run`.
+> - Use the more restrictive `--cap-add=NET_ADMIN` (or `cap_add: [NET_ADMIN]` in `docker-compose` service definitions) to allow the sysctls to be applied at runtime.
+
+## Additional Resources
+
+For broader Docker Compose guidance, see:
+
+- [DOCKER_COMPOSE.md](https://docs.netalertx.com/DOCKER_COMPOSE)
--- a/front/devices.php
+++ b/front/devices.php
@@ -53,7 +53,12 @@
          <div class="col-md-12">
            <div class="box" id="clients">
              <div class="box-header ">
-                <h3 class="box-title col-md-12"><?= lang('Device_Shortcut_OnlineChart');?> </h3>
+                <h3 class="box-title"><?= lang('Device_Shortcut_OnlineChart');?> </h3>
+                <div class="box-tools pull-right">
+                  <button type="button" class="btn btn-box-tool" data-widget="collapse">
+                    <i class="fa fa-minus"></i>
+                  </button>
+                </div>
              </div>
              <div class="box-body">
                <div class="chart">
@@ -72,10 +77,15 @@
      <!-- Device Filters ------------------------------------------------------- -->
      <div class="box box-aqua hidden" id="columnFiltersWrap">
        <div class="box-header ">
-          <h3 class="box-title col-md-12"><?= lang('Devices_Filters');?> </h3>
+          <h3 class="box-title"><?= lang('Devices_Filters');?> </h3>
+          <div class="box-tools pull-right">
+            <button type="button" class="btn btn-box-tool" data-widget="collapse">
+              <i class="fa fa-minus"></i>
+            </button>
+          </div>
        </div>
        <!-- Placeholder ------------------------------------------------------- -->
-         <div id="columnFilters" ></div>
+        <div class="box-body" id="columnFilters"></div>
      </div>

 <!-- datatable ------------------------------------------------------------- -->
@@ -148,6 +158,20 @@
  // DEVICE_COLUMN_FIELDS, COL, NUMERIC_DEFAULTS, GRAPHQL_EXTRA_FIELDS, COLUMN_NAME_MAP
  // are all defined in js/device-columns.js — edit that file to add new columns.

+  // Collapse DevicePresence and Filters sections by default on small/mobile screens
+  (function collapseOnMobile() {
+    if (window.innerWidth < 768) {
+      ['#clients', '#columnFiltersWrap'].forEach(function(sel) {
+        var $box = $(sel);
+        if ($box.length) {
+          $box.addClass('collapsed-box');
+          $box.find('.box-body, .box-footer').hide();
+          $box.find('[data-widget="collapse"] i').removeClass('fa-minus').addClass('fa-plus');
+        }
+      });
+    }
+  })();
+
  // Read parameters & Initialize components
  callAfterAppInitialized(main)
  showSpinner();
@@ -472,12 +496,9 @@ function renderFilters(customData) {
          // Collect filters
          const columnFilters = collectFilters();

-          // Update DataTable with the new filters or search value (if applicable)
-          $('#tableDevices').DataTable().draw();
-
-          // Optionally, apply column filters (if using filters for individual columns)
+          // Apply column filters then draw once (previously drew twice — bug fixed).
          const table = $('#tableDevices').DataTable();
-          table.columnFilters = columnFilters;  // Apply your column filters logic
+          table.columnFilters = columnFilters;
          table.draw();
      });

@@ -603,6 +624,10 @@ function hasEnabledDeviceScanners() {
 // Update the title-bar ETA subtitle and the DataTables empty-state message.
 // Called on every nax:scanEtaUpdate; the inner ticker keeps the title bar live between events.
 function updateScanEtaDisplay(nextScanTime, currentState) {
+  // Detect scan-finished transition BEFORE updating _currentStateAnchor.
+  // justFinishedScanning is true only when the backend transitions scanning → idle.
+  var justFinishedScanning = (currentState === 'Process: Idle') && isScanningState(_currentStateAnchor);
+
  // Prefer the backend-computed values; keep previous anchors if not yet received.
  _nextScanTimeAnchor = nextScanTime || _nextScanTimeAnchor;
  _currentStateAnchor = currentState || _currentStateAnchor;
@@ -636,12 +661,26 @@ function updateScanEtaDisplay(nextScanTime, currentState) {
    eta.style.display = '';
  }

-  // Update DataTables empty message once per SSE event — avoids AJAX spam on server-side tables.
+  // Update DataTables empty message once per SSE event.
+  // NOTE: Do NOT call dt.draw() here — on page load the SSE queue replays all
+  // accumulated events at once, causing a draw() (= GraphQL AJAX call) per event.
+  // Instead, update the visible empty-state DOM cell directly.
  var label = getEtaLabel();
  if ($.fn.DataTable.isDataTable('#tableDevices')) {
    var dt = $('#tableDevices').DataTable();
-    dt.settings()[0].oLanguage.sEmptyTable = buildEmptyDeviceTableMessage(label);
-    if (dt.page.info().recordsTotal === 0) { dt.draw(false); }
+    var newEmptyMsg = buildEmptyDeviceTableMessage(label);
+    dt.settings()[0].oLanguage.sEmptyTable = newEmptyMsg;
+    if (dt.page.info().recordsTotal === 0) {
+      // Patch the visible cell text without triggering a server-side AJAX reload.
+      $('#tableDevices tbody .dataTables_empty').html(newEmptyMsg);
+    }
+
+    // When scanning just finished and the table is still empty, reload data so
+    // newly discovered devices appear automatically. Skip reload if there are
+    // already rows — no need to disturb the user's current view.
+    if (justFinishedScanning && dt.page.info().recordsTotal === 0) {
+      dt.ajax.reload(null, false); // false = keep current page position
+    }
  }

  tickTitleBar();
--- a/front/php/templates/language/id_id.json
+++ b/front/php/templates/language/id_id.json
@@ -0,0 +1,807 @@
+{
+    "API_CUSTOM_SQL_description": "",
+    "API_CUSTOM_SQL_name": "",
+    "API_TOKEN_description": "",
+    "API_TOKEN_name": "",
+    "API_display_name": "",
+    "API_icon": "",
+    "About_Design": "",
+    "About_Exit": "",
+    "About_Title": "",
+    "AppEvents_AppEventProcessed": "",
+    "AppEvents_DateTimeCreated": "",
+    "AppEvents_Extra": "",
+    "AppEvents_GUID": "",
+    "AppEvents_Helper1": "",
+    "AppEvents_Helper2": "",
+    "AppEvents_Helper3": "",
+    "AppEvents_ObjectForeignKey": "",
+    "AppEvents_ObjectIndex": "",
+    "AppEvents_ObjectIsArchived": "",
+    "AppEvents_ObjectIsNew": "",
+    "AppEvents_ObjectPlugin": "",
+    "AppEvents_ObjectPrimaryID": "",
+    "AppEvents_ObjectSecondaryID": "",
+    "AppEvents_ObjectStatus": "",
+    "AppEvents_ObjectStatusColumn": "",
+    "AppEvents_ObjectType": "",
+    "AppEvents_Plugin": "",
+    "AppEvents_Type": "",
+    "BACKEND_API_URL_description": "",
+    "BACKEND_API_URL_name": "",
+    "BackDevDetail_Actions_Ask_Run": "",
+    "BackDevDetail_Actions_Not_Registered": "",
+    "BackDevDetail_Actions_Title_Run": "",
+    "BackDevDetail_Copy_Ask": "",
+    "BackDevDetail_Copy_Title": "",
+    "BackDevDetail_Tools_WOL_error": "",
+    "BackDevDetail_Tools_WOL_okay": "",
+    "BackDevices_Arpscan_disabled": "",
+    "BackDevices_Arpscan_enabled": "",
+    "BackDevices_Backup_CopError": "",
+    "BackDevices_Backup_Failed": "",
+    "BackDevices_Backup_okay": "",
+    "BackDevices_DBTools_DelDevError_a": "",
+    "BackDevices_DBTools_DelDevError_b": "",
+    "BackDevices_DBTools_DelDev_a": "",
+    "BackDevices_DBTools_DelDev_b": "",
+    "BackDevices_DBTools_DelEvents": "",
+    "BackDevices_DBTools_DelEventsError": "",
+    "BackDevices_DBTools_ImportCSV": "",
+    "BackDevices_DBTools_ImportCSVError": "",
+    "BackDevices_DBTools_ImportCSVMissing": "",
+    "BackDevices_DBTools_Purge": "",
+    "BackDevices_DBTools_UpdDev": "",
+    "BackDevices_DBTools_UpdDevError": "",
+    "BackDevices_DBTools_Upgrade": "",
+    "BackDevices_DBTools_UpgradeError": "",
+    "BackDevices_Device_UpdDevError": "",
+    "BackDevices_Restore_CopError": "",
+    "BackDevices_Restore_Failed": "",
+    "BackDevices_Restore_okay": "",
+    "BackDevices_darkmode_disabled": "",
+    "BackDevices_darkmode_enabled": "",
+    "CLEAR_NEW_FLAG_description": "",
+    "CLEAR_NEW_FLAG_name": "",
+    "CustProps_cant_remove": "",
+    "DAYS_TO_KEEP_EVENTS_description": "",
+    "DAYS_TO_KEEP_EVENTS_name": "",
+    "DISCOVER_PLUGINS_description": "",
+    "DISCOVER_PLUGINS_name": "",
+    "DevDetail_Children_Title": "",
+    "DevDetail_Copy_Device_Title": "",
+    "DevDetail_Copy_Device_Tooltip": "",
+    "DevDetail_CustomProperties_Title": "",
+    "DevDetail_CustomProps_reset_info": "",
+    "DevDetail_DisplayFields_Title": "",
+    "DevDetail_EveandAl_AlertAllEvents": "",
+    "DevDetail_EveandAl_AlertDown": "",
+    "DevDetail_EveandAl_Archived": "",
+    "DevDetail_EveandAl_NewDevice": "",
+    "DevDetail_EveandAl_NewDevice_Tooltip": "",
+    "DevDetail_EveandAl_RandomMAC": "",
+    "DevDetail_EveandAl_ScanCycle": "",
+    "DevDetail_EveandAl_ScanCycle_a": "",
+    "DevDetail_EveandAl_ScanCycle_z": "",
+    "DevDetail_EveandAl_Skip": "",
+    "DevDetail_EveandAl_Title": "",
+    "DevDetail_Events_CheckBox": "",
+    "DevDetail_GoToNetworkNode": "",
+    "DevDetail_Icon": "",
+    "DevDetail_Icon_Descr": "",
+    "DevDetail_Loading": "",
+    "DevDetail_MainInfo_Comments": "",
+    "DevDetail_MainInfo_Favorite": "",
+    "DevDetail_MainInfo_Group": "",
+    "DevDetail_MainInfo_Location": "",
+    "DevDetail_MainInfo_Name": "",
+    "DevDetail_MainInfo_Network": "",
+    "DevDetail_MainInfo_Network_Port": "",
+    "DevDetail_MainInfo_Network_Site": "",
+    "DevDetail_MainInfo_Network_Title": "",
+    "DevDetail_MainInfo_Owner": "",
+    "DevDetail_MainInfo_SSID": "",
+    "DevDetail_MainInfo_Title": "",
+    "DevDetail_MainInfo_Type": "",
+    "DevDetail_MainInfo_Vendor": "",
+    "DevDetail_MainInfo_mac": "",
+    "DevDetail_NavToChildNode": "",
+    "DevDetail_Network_Node_hover": "",
+    "DevDetail_Network_Port_hover": "",
+    "DevDetail_Nmap_Scans": "",
+    "DevDetail_Nmap_Scans_desc": "",
+    "DevDetail_Nmap_buttonDefault": "",
+    "DevDetail_Nmap_buttonDefault_text": "",
+    "DevDetail_Nmap_buttonDetail": "",
+    "DevDetail_Nmap_buttonDetail_text": "",
+    "DevDetail_Nmap_buttonFast": "",
+    "DevDetail_Nmap_buttonFast_text": "",
+    "DevDetail_Nmap_buttonSkipDiscovery": "",
+    "DevDetail_Nmap_buttonSkipDiscovery_text": "",
+    "DevDetail_Nmap_resultsLink": "",
+    "DevDetail_Owner_hover": "",
+    "DevDetail_Periodselect_All": "",
+    "DevDetail_Periodselect_LastMonth": "",
+    "DevDetail_Periodselect_LastWeek": "",
+    "DevDetail_Periodselect_LastYear": "",
+    "DevDetail_Periodselect_today": "",
+    "DevDetail_Run_Actions_Title": "",
+    "DevDetail_Run_Actions_Tooltip": "",
+    "DevDetail_SessionInfo_FirstSession": "",
+    "DevDetail_SessionInfo_LastIP": "",
+    "DevDetail_SessionInfo_LastSession": "",
+    "DevDetail_SessionInfo_StaticIP": "",
+    "DevDetail_SessionInfo_Status": "",
+    "DevDetail_SessionInfo_Title": "",
+    "DevDetail_SessionTable_Additionalinfo": "",
+    "DevDetail_SessionTable_Connection": "",
+    "DevDetail_SessionTable_Disconnection": "",
+    "DevDetail_SessionTable_Duration": "",
+    "DevDetail_SessionTable_IP": "",
+    "DevDetail_SessionTable_Order": "",
+    "DevDetail_Shortcut_CurrentStatus": "",
+    "DevDetail_Shortcut_DownAlerts": "",
+    "DevDetail_Shortcut_Presence": "",
+    "DevDetail_Shortcut_Sessions": "",
+    "DevDetail_Tab_Details": "",
+    "DevDetail_Tab_Events": "",
+    "DevDetail_Tab_EventsTableDate": "",
+    "DevDetail_Tab_EventsTableEvent": "",
+    "DevDetail_Tab_EventsTableIP": "",
+    "DevDetail_Tab_EventsTableInfo": "",
+    "DevDetail_Tab_Nmap": "",
+    "DevDetail_Tab_NmapEmpty": "",
+    "DevDetail_Tab_NmapTableExtra": "",
+    "DevDetail_Tab_NmapTableHeader": "",
+    "DevDetail_Tab_NmapTableIndex": "",
+    "DevDetail_Tab_NmapTablePort": "",
+    "DevDetail_Tab_NmapTableService": "",
+    "DevDetail_Tab_NmapTableState": "",
+    "DevDetail_Tab_NmapTableText": "",
+    "DevDetail_Tab_NmapTableTime": "",
+    "DevDetail_Tab_Plugins": "",
+    "DevDetail_Tab_Presence": "",
+    "DevDetail_Tab_Sessions": "",
+    "DevDetail_Tab_Tools": "",
+    "DevDetail_Tab_Tools_Internet_Info_Description": "",
+    "DevDetail_Tab_Tools_Internet_Info_Error": "",
+    "DevDetail_Tab_Tools_Internet_Info_Start": "",
+    "DevDetail_Tab_Tools_Internet_Info_Title": "",
+    "DevDetail_Tab_Tools_Nslookup_Description": "",
+    "DevDetail_Tab_Tools_Nslookup_Error": "",
+    "DevDetail_Tab_Tools_Nslookup_Start": "",
+    "DevDetail_Tab_Tools_Nslookup_Title": "",
+    "DevDetail_Tab_Tools_Speedtest_Description": "",
+    "DevDetail_Tab_Tools_Speedtest_Start": "",
+    "DevDetail_Tab_Tools_Speedtest_Title": "",
+    "DevDetail_Tab_Tools_Traceroute_Description": "",
+    "DevDetail_Tab_Tools_Traceroute_Error": "",
+    "DevDetail_Tab_Tools_Traceroute_Start": "",
+    "DevDetail_Tab_Tools_Traceroute_Title": "",
+    "DevDetail_Tools_WOL": "",
+    "DevDetail_Tools_WOL_noti": "",
+    "DevDetail_Tools_WOL_noti_text": "",
+    "DevDetail_Type_hover": "",
+    "DevDetail_Vendor_hover": "",
+    "DevDetail_WOL_Title": "",
+    "DevDetail_button_AddIcon": "",
+    "DevDetail_button_AddIcon_Help": "",
+    "DevDetail_button_AddIcon_Tooltip": "",
+    "DevDetail_button_Delete": "",
+    "DevDetail_button_DeleteEvents": "",
+    "DevDetail_button_DeleteEvents_Warning": "",
+    "DevDetail_button_Delete_ask": "",
+    "DevDetail_button_OverwriteIcons": "",
+    "DevDetail_button_OverwriteIcons_Tooltip": "",
+    "DevDetail_button_OverwriteIcons_Warning": "",
+    "DevDetail_button_Reset": "",
+    "DevDetail_button_Save": "",
+    "DeviceEdit_ValidMacIp": "",
+    "Device_MultiEdit": "",
+    "Device_MultiEdit_Backup": "",
+    "Device_MultiEdit_Fields": "",
+    "Device_MultiEdit_MassActions": "",
+    "Device_MultiEdit_No_Devices": "",
+    "Device_MultiEdit_Tooltip": "",
+    "Device_NextScan_Imminent": "",
+    "Device_NextScan_In": "",
+    "Device_NoData_Help": "",
+    "Device_NoData_Scanning": "",
+    "Device_NoData_Title": "",
+    "Device_Save_Failed": "",
+    "Device_Save_Unauthorized": "",
+    "Device_Saved_Success": "",
+    "Device_Saved_Unexpected": "",
+    "Device_Scanning": "",
+    "Device_Searchbox": "",
+    "Device_Shortcut_AllDevices": "",
+    "Device_Shortcut_AllNodes": "",
+    "Device_Shortcut_Archived": "",
+    "Device_Shortcut_Connected": "",
+    "Device_Shortcut_Devices": "",
+    "Device_Shortcut_DownAlerts": "",
+    "Device_Shortcut_DownOnly": "",
+    "Device_Shortcut_Favorites": "",
+    "Device_Shortcut_NewDevices": "",
+    "Device_Shortcut_OnlineChart": "",
+    "Device_Shortcut_Unstable": "",
+    "Device_TableHead_AlertDown": "",
+    "Device_TableHead_Connected_Devices": "",
+    "Device_TableHead_CustomProps": "",
+    "Device_TableHead_FQDN": "",
+    "Device_TableHead_Favorite": "",
+    "Device_TableHead_FirstSession": "",
+    "Device_TableHead_Flapping": "",
+    "Device_TableHead_GUID": "",
+    "Device_TableHead_Group": "",
+    "Device_TableHead_IPv4": "",
+    "Device_TableHead_IPv6": "",
+    "Device_TableHead_Icon": "",
+    "Device_TableHead_LastIP": "",
+    "Device_TableHead_LastIPOrder": "",
+    "Device_TableHead_LastSession": "",
+    "Device_TableHead_Location": "",
+    "Device_TableHead_MAC": "",
+    "Device_TableHead_MAC_full": "",
+    "Device_TableHead_Name": "",
+    "Device_TableHead_NetworkSite": "",
+    "Device_TableHead_Owner": "",
+    "Device_TableHead_ParentRelType": "",
+    "Device_TableHead_Parent_MAC": "",
+    "Device_TableHead_Port": "",
+    "Device_TableHead_PresentLastScan": "",
+    "Device_TableHead_ReqNicsOnline": "",
+    "Device_TableHead_RowID": "",
+    "Device_TableHead_Rowid": "",
+    "Device_TableHead_SSID": "",
+    "Device_TableHead_SourcePlugin": "",
+    "Device_TableHead_Status": "",
+    "Device_TableHead_SyncHubNodeName": "",
+    "Device_TableHead_Type": "",
+    "Device_TableHead_Vendor": "",
+    "Device_TableHead_Vlan": "",
+    "Device_Table_Not_Network_Device": "",
+    "Device_Table_info": "",
+    "Device_Table_nav_next": "",
+    "Device_Table_nav_prev": "",
+    "Device_Tablelenght": "",
+    "Device_Tablelenght_all": "",
+    "Device_Title": "",
+    "Devices_Filters": "",
+    "ENABLE_PLUGINS_description": "",
+    "ENABLE_PLUGINS_name": "",
+    "ENCRYPTION_KEY_description": "",
+    "ENCRYPTION_KEY_name": "",
+    "Email_display_name": "",
+    "Email_icon": "",
+    "Events_Loading": "",
+    "Events_Periodselect_All": "",
+    "Events_Periodselect_LastMonth": "",
+    "Events_Periodselect_LastWeek": "",
+    "Events_Periodselect_LastYear": "",
+    "Events_Periodselect_today": "",
+    "Events_Searchbox": "",
+    "Events_Shortcut_AllEvents": "",
+    "Events_Shortcut_DownAlerts": "",
+    "Events_Shortcut_Events": "",
+    "Events_Shortcut_MissSessions": "",
+    "Events_Shortcut_NewDevices": "",
+    "Events_Shortcut_Sessions": "",
+    "Events_Shortcut_VoidSessions": "",
+    "Events_TableHead_AdditionalInfo": "",
+    "Events_TableHead_Connection": "",
+    "Events_TableHead_Date": "",
+    "Events_TableHead_Device": "",
+    "Events_TableHead_Disconnection": "",
+    "Events_TableHead_Duration": "",
+    "Events_TableHead_DurationOrder": "",
+    "Events_TableHead_EventType": "",
+    "Events_TableHead_IP": "",
+    "Events_TableHead_IPOrder": "",
+    "Events_TableHead_Order": "",
+    "Events_TableHead_Owner": "",
+    "Events_TableHead_PendingAlert": "",
+    "Events_Table_info": "",
+    "Events_Table_nav_next": "",
+    "Events_Table_nav_prev": "",
+    "Events_Tablelenght": "",
+    "Events_Tablelenght_all": "",
+    "Events_Title": "",
+    "FakeMAC_hover": "",
+    "FieldLock_Error": "",
+    "FieldLock_Lock_Tooltip": "",
+    "FieldLock_Locked": "",
+    "FieldLock_SaveBeforeLocking": "",
+    "FieldLock_Source_Label": "",
+    "FieldLock_Unlock_Tooltip": "",
+    "FieldLock_Unlocked": "",
+    "GRAPHQL_PORT_description": "",
+    "GRAPHQL_PORT_name": "",
+    "Gen_Action": "",
+    "Gen_Add": "",
+    "Gen_AddDevice": "",
+    "Gen_Add_All": "",
+    "Gen_All_Devices": "",
+    "Gen_Archived": "",
+    "Gen_AreYouSure": "",
+    "Gen_Backup": "",
+    "Gen_Cancel": "",
+    "Gen_Change": "",
+    "Gen_Copy": "",
+    "Gen_CopyToClipboard": "",
+    "Gen_DataUpdatedUITakesTime": "",
+    "Gen_Delete": "",
+    "Gen_DeleteAll": "",
+    "Gen_Description": "",
+    "Gen_Down": "",
+    "Gen_Error": "",
+    "Gen_Filter": "",
+    "Gen_Flapping": "",
+    "Gen_Generate": "",
+    "Gen_InvalidMac": "",
+    "Gen_Invalid_Value": "",
+    "Gen_LockedDB": "",
+    "Gen_NetworkMask": "",
+    "Gen_New": "",
+    "Gen_Offline": "",
+    "Gen_Okay": "",
+    "Gen_Online": "",
+    "Gen_Purge": "",
+    "Gen_ReadDocs": "",
+    "Gen_Remove_All": "",
+    "Gen_Remove_Last": "",
+    "Gen_Reset": "",
+    "Gen_Restore": "",
+    "Gen_Run": "",
+    "Gen_Save": "",
+    "Gen_Saved": "",
+    "Gen_Search": "",
+    "Gen_Select": "",
+    "Gen_SelectIcon": "",
+    "Gen_SelectToPreview": "",
+    "Gen_Selected_Devices": "",
+    "Gen_Sleeping": "",
+    "Gen_Subnet": "",
+    "Gen_Switch": "",
+    "Gen_Upd": "",
+    "Gen_Upd_Fail": "",
+    "Gen_Update": "",
+    "Gen_Update_Value": "",
+    "Gen_ValidIcon": "",
+    "Gen_Warning": "",
+    "Gen_Work_In_Progress": "",
+    "Gen_create_new_device": "",
+    "Gen_create_new_device_info": "",
+    "General_display_name": "",
+    "General_icon": "",
+    "HRS_TO_KEEP_NEWDEV_description": "",
+    "HRS_TO_KEEP_NEWDEV_name": "",
+    "HRS_TO_KEEP_OFFDEV_description": "",
+    "HRS_TO_KEEP_OFFDEV_name": "",
+    "LOADED_PLUGINS_description": "",
+    "LOADED_PLUGINS_name": "",
+    "LOG_LEVEL_description": "",
+    "LOG_LEVEL_name": "",
+    "Loading": "",
+    "Login_Box": "",
+    "Login_Default_PWD": "",
+    "Login_Info": "",
+    "Login_Psw-box": "",
+    "Login_Psw_alert": "",
+    "Login_Psw_folder": "",
+    "Login_Psw_new": "",
+    "Login_Psw_run": "",
+    "Login_Remember": "",
+    "Login_Remember_small": "",
+    "Login_Submit": "",
+    "Login_Toggle_Alert_headline": "",
+    "Login_Toggle_Info": "",
+    "Login_Toggle_Info_headline": "",
+    "Maint_PurgeLog": "",
+    "Maint_RestartServer": "",
+    "Maint_Restart_Server_noti_text": "",
+    "Maintenance_InitCheck": "",
+    "Maintenance_InitCheck_Checking": "",
+    "Maintenance_InitCheck_QuickSetupGuide": "",
+    "Maintenance_InitCheck_Success": "",
+    "Maintenance_ReCheck": "",
+    "Maintenance_Running_Version": "",
+    "Maintenance_Status": "",
+    "Maintenance_Title": "",
+    "Maintenance_Tool_DownloadConfig": "",
+    "Maintenance_Tool_DownloadConfig_text": "",
+    "Maintenance_Tool_DownloadWorkflows": "",
+    "Maintenance_Tool_DownloadWorkflows_text": "",
+    "Maintenance_Tool_ExportCSV": "",
+    "Maintenance_Tool_ExportCSV_noti": "",
+    "Maintenance_Tool_ExportCSV_noti_text": "",
+    "Maintenance_Tool_ExportCSV_text": "",
+    "Maintenance_Tool_ImportCSV": "",
+    "Maintenance_Tool_ImportCSV_noti": "",
+    "Maintenance_Tool_ImportCSV_noti_text": "",
+    "Maintenance_Tool_ImportCSV_text": "",
+    "Maintenance_Tool_ImportConfig_noti": "",
+    "Maintenance_Tool_ImportPastedCSV": "",
+    "Maintenance_Tool_ImportPastedCSV_noti_text": "",
+    "Maintenance_Tool_ImportPastedCSV_text": "",
+    "Maintenance_Tool_ImportPastedConfig": "",
+    "Maintenance_Tool_ImportPastedConfig_noti_text": "",
+    "Maintenance_Tool_ImportPastedConfig_text": "",
+    "Maintenance_Tool_UnlockFields": "",
+    "Maintenance_Tool_UnlockFields_noti": "",
+    "Maintenance_Tool_UnlockFields_noti_text": "",
+    "Maintenance_Tool_UnlockFields_text": "",
+    "Maintenance_Tool_arpscansw": "",
+    "Maintenance_Tool_arpscansw_noti": "",
+    "Maintenance_Tool_arpscansw_noti_text": "",
+    "Maintenance_Tool_arpscansw_text": "",
+    "Maintenance_Tool_backup": "",
+    "Maintenance_Tool_backup_noti": "",
+    "Maintenance_Tool_backup_noti_text": "",
+    "Maintenance_Tool_backup_text": "",
+    "Maintenance_Tool_check_visible": "",
+    "Maintenance_Tool_clearSourceFields_selected": "",
+    "Maintenance_Tool_clearSourceFields_selected_noti": "",
+    "Maintenance_Tool_clearSourceFields_selected_text": "",
+    "Maintenance_Tool_darkmode": "",
+    "Maintenance_Tool_darkmode_noti": "",
+    "Maintenance_Tool_darkmode_noti_text": "",
+    "Maintenance_Tool_darkmode_text": "",
+    "Maintenance_Tool_del_ActHistory": "",
+    "Maintenance_Tool_del_ActHistory_noti": "",
+    "Maintenance_Tool_del_ActHistory_noti_text": "",
+    "Maintenance_Tool_del_ActHistory_text": "",
+    "Maintenance_Tool_del_alldev": "",
+    "Maintenance_Tool_del_alldev_noti": "",
+    "Maintenance_Tool_del_alldev_noti_text": "",
+    "Maintenance_Tool_del_alldev_text": "",
+    "Maintenance_Tool_del_allevents": "",
+    "Maintenance_Tool_del_allevents30": "",
+    "Maintenance_Tool_del_allevents30_noti": "",
+    "Maintenance_Tool_del_allevents30_noti_text": "",
+    "Maintenance_Tool_del_allevents30_text": "",
+    "Maintenance_Tool_del_allevents_noti": "",
+    "Maintenance_Tool_del_allevents_noti_text": "",
+    "Maintenance_Tool_del_allevents_text": "",
+    "Maintenance_Tool_del_empty_macs": "",
+    "Maintenance_Tool_del_empty_macs_noti": "",
+    "Maintenance_Tool_del_empty_macs_noti_text": "",
+    "Maintenance_Tool_del_empty_macs_text": "",
+    "Maintenance_Tool_del_selecteddev": "",
+    "Maintenance_Tool_del_selecteddev_text": "",
+    "Maintenance_Tool_del_unknowndev": "",
+    "Maintenance_Tool_del_unknowndev_noti": "",
+    "Maintenance_Tool_del_unknowndev_noti_text": "",
+    "Maintenance_Tool_del_unknowndev_text": "",
+    "Maintenance_Tool_del_unlockFields_selecteddev_text": "",
+    "Maintenance_Tool_displayed_columns_text": "",
+    "Maintenance_Tool_drag_me": "",
+    "Maintenance_Tool_order_columns_text": "",
+    "Maintenance_Tool_purgebackup": "",
+    "Maintenance_Tool_purgebackup_noti": "",
+    "Maintenance_Tool_purgebackup_noti_text": "",
+    "Maintenance_Tool_purgebackup_text": "",
+    "Maintenance_Tool_restore": "",
+    "Maintenance_Tool_restore_noti": "",
+    "Maintenance_Tool_restore_noti_text": "",
+    "Maintenance_Tool_restore_text": "",
+    "Maintenance_Tool_unlockFields_selecteddev": "",
+    "Maintenance_Tool_unlockFields_selecteddev_noti": "",
+    "Maintenance_Tool_upgrade_database_noti": "",
+    "Maintenance_Tool_upgrade_database_noti_text": "",
+    "Maintenance_Tool_upgrade_database_text": "",
+    "Maintenance_Tools_Tab_BackupRestore": "",
+    "Maintenance_Tools_Tab_Logging": "",
+    "Maintenance_Tools_Tab_Settings": "",
+    "Maintenance_Tools_Tab_Tools": "",
+    "Maintenance_Tools_Tab_UISettings": "",
+    "Maintenance_arp_status": "",
+    "Maintenance_arp_status_off": "",
+    "Maintenance_arp_status_on": "",
+    "Maintenance_built_on": "",
+    "Maintenance_current_version": "",
+    "Maintenance_database_backup": "",
+    "Maintenance_database_backup_found": "",
+    "Maintenance_database_backup_total": "",
+    "Maintenance_database_lastmod": "",
+    "Maintenance_database_path": "",
+    "Maintenance_database_rows": "",
+    "Maintenance_database_size": "",
+    "Maintenance_lang_selector_apply": "",
+    "Maintenance_lang_selector_empty": "",
+    "Maintenance_lang_selector_lable": "",
+    "Maintenance_lang_selector_text": "",
+    "Maintenance_new_version": "",
+    "Maintenance_themeselector_apply": "",
+    "Maintenance_themeselector_empty": "",
+    "Maintenance_themeselector_lable": "",
+    "Maintenance_themeselector_text": "",
+    "Maintenance_version": "",
+    "NETWORK_DEVICE_TYPES_description": "",
+    "NETWORK_DEVICE_TYPES_name": "",
+    "Navigation_About": "",
+    "Navigation_AppEvents": "",
+    "Navigation_Devices": "",
+    "Navigation_Donations": "",
+    "Navigation_Events": "",
+    "Navigation_Integrations": "",
+    "Navigation_Maintenance": "",
+    "Navigation_Monitoring": "",
+    "Navigation_Network": "",
+    "Navigation_Notifications": "",
+    "Navigation_Plugins": "",
+    "Navigation_Presence": "",
+    "Navigation_Report": "",
+    "Navigation_Settings": "",
+    "Navigation_SystemInfo": "",
+    "Navigation_Workflows": "",
+    "Network_Assign": "",
+    "Network_Cant_Assign": "",
+    "Network_Cant_Assign_No_Node_Selected": "",
+    "Network_Configuration_Error": "",
+    "Network_Connected": "",
+    "Network_Devices": "",
+    "Network_ManageAdd": "",
+    "Network_ManageAdd_Name": "",
+    "Network_ManageAdd_Name_text": "",
+    "Network_ManageAdd_Port": "",
+    "Network_ManageAdd_Port_text": "",
+    "Network_ManageAdd_Submit": "",
+    "Network_ManageAdd_Type": "",
+    "Network_ManageAdd_Type_text": "",
+    "Network_ManageAssign": "",
+    "Network_ManageDel": "",
+    "Network_ManageDel_Name": "",
+    "Network_ManageDel_Name_text": "",
+    "Network_ManageDel_Submit": "",
+    "Network_ManageDevices": "",
+    "Network_ManageEdit": "",
+    "Network_ManageEdit_ID": "",
+    "Network_ManageEdit_ID_text": "",
+    "Network_ManageEdit_Name": "",
+    "Network_ManageEdit_Name_text": "",
+    "Network_ManageEdit_Port": "",
+    "Network_ManageEdit_Port_text": "",
+    "Network_ManageEdit_Submit": "",
+    "Network_ManageEdit_Type": "",
+    "Network_ManageEdit_Type_text": "",
+    "Network_ManageLeaf": "",
+    "Network_ManageUnassign": "",
+    "Network_NoAssignedDevices": "",
+    "Network_NoDevices": "",
+    "Network_Node": "",
+    "Network_Node_Name": "",
+    "Network_Parent": "",
+    "Network_Root": "",
+    "Network_Root_Not_Configured": "",
+    "Network_Root_Unconfigurable": "",
+    "Network_ShowArchived": "",
+    "Network_ShowOffline": "",
+    "Network_Table_Hostname": "",
+    "Network_Table_IP": "",
+    "Network_Table_State": "",
+    "Network_Title": "",
+    "Network_UnassignedDevices": "",
+    "Notifications_All": "",
+    "Notifications_Mark_All_Read": "",
+    "PIALERT_WEB_PASSWORD_description": "",
+    "PIALERT_WEB_PASSWORD_name": "",
+    "PIALERT_WEB_PROTECTION_description": "",
+    "PIALERT_WEB_PROTECTION_name": "",
+    "PLUGINS_KEEP_HIST_description": "",
+    "PLUGINS_KEEP_HIST_name": "",
+    "PRAGMA_JOURNAL_SIZE_LIMIT_description": "",
+    "PRAGMA_JOURNAL_SIZE_LIMIT_name": "",
+    "Plugins_DeleteAll": "",
+    "Plugins_Filters_Mac": "",
+    "Plugins_History": "",
+    "Plugins_Obj_DeleteListed": "",
+    "Plugins_Objects": "",
+    "Plugins_Out_of": "",
+    "Plugins_Unprocessed_Events": "",
+    "Plugins_no_control": "",
+    "Presence_CalHead_day": "",
+    "Presence_CalHead_lang": "",
+    "Presence_CalHead_month": "",
+    "Presence_CalHead_quarter": "",
+    "Presence_CalHead_week": "",
+    "Presence_CalHead_year": "",
+    "Presence_CallHead_Devices": "",
+    "Presence_Key_OnlineNow": "",
+    "Presence_Key_OnlineNow_desc": "",
+    "Presence_Key_OnlinePast": "",
+    "Presence_Key_OnlinePastMiss": "",
+    "Presence_Key_OnlinePastMiss_desc": "",
+    "Presence_Key_OnlinePast_desc": "",
+    "Presence_Loading": "",
+    "Presence_Shortcut_AllDevices": "",
+    "Presence_Shortcut_Archived": "",
+    "Presence_Shortcut_Connected": "",
+    "Presence_Shortcut_Devices": "",
+    "Presence_Shortcut_DownAlerts": "",
+    "Presence_Shortcut_Favorites": "",
+    "Presence_Shortcut_NewDevices": "",
+    "Presence_Title": "",
+    "REFRESH_FQDN_description": "",
+    "REFRESH_FQDN_name": "",
+    "REPORT_DASHBOARD_URL_description": "",
+    "REPORT_DASHBOARD_URL_name": "",
+    "REPORT_ERROR": "",
+    "REPORT_MAIL_description": "",
+    "REPORT_MAIL_name": "",
+    "REPORT_TITLE": "",
+    "RandomMAC_hover": "",
+    "Reports_Sent_Log": "",
+    "SCAN_SUBNETS_description": "",
+    "SCAN_SUBNETS_name": "",
+    "SYSTEM_TITLE": "",
+    "Setting_Override": "",
+    "Setting_Override_Description": "",
+    "Settings_Metadata_Toggle": "",
+    "Settings_Show_Description": "",
+    "Settings_device_Scanners_desync": "",
+    "Settings_device_Scanners_desync_popup": "",
+    "Speedtest_Results": "",
+    "Systeminfo_AvailableIps": "",
+    "Systeminfo_CPU": "",
+    "Systeminfo_CPU_Cores": "",
+    "Systeminfo_CPU_Name": "",
+    "Systeminfo_CPU_Speed": "",
+    "Systeminfo_CPU_Temp": "",
+    "Systeminfo_CPU_Vendor": "",
+    "Systeminfo_Client_Resolution": "",
+    "Systeminfo_Client_User_Agent": "",
+    "Systeminfo_General": "",
+    "Systeminfo_General_Date": "",
+    "Systeminfo_General_Date2": "",
+    "Systeminfo_General_Full_Date": "",
+    "Systeminfo_General_TimeZone": "",
+    "Systeminfo_Memory": "",
+    "Systeminfo_Memory_Total_Memory": "",
+    "Systeminfo_Memory_Usage": "",
+    "Systeminfo_Memory_Usage_Percent": "",
+    "Systeminfo_Motherboard": "",
+    "Systeminfo_Motherboard_BIOS": "",
+    "Systeminfo_Motherboard_BIOS_Date": "",
+    "Systeminfo_Motherboard_BIOS_Vendor": "",
+    "Systeminfo_Motherboard_Manufactured": "",
+    "Systeminfo_Motherboard_Name": "",
+    "Systeminfo_Motherboard_Revision": "",
+    "Systeminfo_Network": "",
+    "Systeminfo_Network_Accept_Encoding": "",
+    "Systeminfo_Network_Accept_Language": "",
+    "Systeminfo_Network_Connection_Port": "",
+    "Systeminfo_Network_HTTP_Host": "",
+    "Systeminfo_Network_HTTP_Referer": "",
+    "Systeminfo_Network_HTTP_Referer_String": "",
+    "Systeminfo_Network_Hardware": "",
+    "Systeminfo_Network_Hardware_Interface_Mask": "",
+    "Systeminfo_Network_Hardware_Interface_Name": "",
+    "Systeminfo_Network_Hardware_Interface_RX": "",
+    "Systeminfo_Network_Hardware_Interface_TX": "",
+    "Systeminfo_Network_IP": "",
+    "Systeminfo_Network_IP_Connection": "",
+    "Systeminfo_Network_IP_Server": "",
+    "Systeminfo_Network_MIME": "",
+    "Systeminfo_Network_Request_Method": "",
+    "Systeminfo_Network_Request_Time": "",
+    "Systeminfo_Network_Request_URI": "",
+    "Systeminfo_Network_Secure_Connection": "",
+    "Systeminfo_Network_Secure_Connection_String": "",
+    "Systeminfo_Network_Server_Name": "",
+    "Systeminfo_Network_Server_Name_String": "",
+    "Systeminfo_Network_Server_Query": "",
+    "Systeminfo_Network_Server_Query_String": "",
+    "Systeminfo_Network_Server_Version": "",
+    "Systeminfo_Services": "",
+    "Systeminfo_Services_Description": "",
+    "Systeminfo_Services_Name": "",
+    "Systeminfo_Storage": "",
+    "Systeminfo_Storage_Device": "",
+    "Systeminfo_Storage_Mount": "",
+    "Systeminfo_Storage_Size": "",
+    "Systeminfo_Storage_Type": "",
+    "Systeminfo_Storage_Usage": "",
+    "Systeminfo_Storage_Usage_Free": "",
+    "Systeminfo_Storage_Usage_Mount": "",
+    "Systeminfo_Storage_Usage_Total": "",
+    "Systeminfo_Storage_Usage_Used": "",
+    "Systeminfo_System": "",
+    "Systeminfo_System_AVG": "",
+    "Systeminfo_System_Architecture": "",
+    "Systeminfo_System_Kernel": "",
+    "Systeminfo_System_OSVersion": "",
+    "Systeminfo_System_Running_Processes": "",
+    "Systeminfo_System_System": "",
+    "Systeminfo_System_Uname": "",
+    "Systeminfo_System_Uptime": "",
+    "Systeminfo_This_Client": "",
+    "Systeminfo_USB_Devices": "",
+    "TICKER_MIGRATE_TO_NETALERTX": "",
+    "TIMEZONE_description": "",
+    "TIMEZONE_name": "",
+    "UI_DEV_SECTIONS_description": "",
+    "UI_DEV_SECTIONS_name": "",
+    "UI_ICONS_description": "",
+    "UI_ICONS_name": "",
+    "UI_LANG_description": "",
+    "UI_LANG_name": "",
+    "UI_MY_DEVICES_description": "",
+    "UI_MY_DEVICES_name": "",
+    "UI_NOT_RANDOM_MAC_description": "",
+    "UI_NOT_RANDOM_MAC_name": "",
+    "UI_PRESENCE_description": "",
+    "UI_PRESENCE_name": "",
+    "UI_REFRESH_description": "",
+    "UI_REFRESH_name": "",
+    "VERSION_description": "",
+    "VERSION_name": "",
+    "WF_Action_Add": "",
+    "WF_Action_field": "",
+    "WF_Action_type": "",
+    "WF_Action_value": "",
+    "WF_Actions": "",
+    "WF_Add": "",
+    "WF_Add_Condition": "",
+    "WF_Add_Group": "",
+    "WF_Condition_field": "",
+    "WF_Condition_operator": "",
+    "WF_Condition_value": "",
+    "WF_Conditions": "",
+    "WF_Conditions_logic_rules": "",
+    "WF_Duplicate": "",
+    "WF_Enabled": "",
+    "WF_Export": "",
+    "WF_Export_Copy": "",
+    "WF_Import": "",
+    "WF_Import_Copy": "",
+    "WF_Name": "",
+    "WF_Remove": "",
+    "WF_Remove_Copy": "",
+    "WF_Save": "",
+    "WF_Trigger": "",
+    "WF_Trigger_event_type": "",
+    "WF_Trigger_type": "",
+    "add_icon_event_tooltip": "",
+    "add_option_event_tooltip": "",
+    "copy_icons_event_tooltip": "",
+    "devices_old": "",
+    "general_event_description": "",
+    "general_event_title": "",
+    "go_to_device_event_tooltip": "",
+    "go_to_node_event_tooltip": "",
+    "new_version_available": "",
+    "report_guid": "",
+    "report_guid_missing": "",
+    "report_select_format": "",
+    "report_time": "",
+    "run_event_tooltip": "",
+    "select_icon_event_tooltip": "",
+    "settings_core_icon": "",
+    "settings_core_label": "",
+    "settings_device_scanners": "",
+    "settings_device_scanners_icon": "",
+    "settings_device_scanners_info": "",
+    "settings_device_scanners_label": "",
+    "settings_enabled": "",
+    "settings_enabled_icon": "",
+    "settings_expand_all": "",
+    "settings_imported": "",
+    "settings_imported_label": "",
+    "settings_missing": "",
+    "settings_missing_block": "",
+    "settings_old": "",
+    "settings_other_scanners": "",
+    "settings_other_scanners_icon": "",
+    "settings_other_scanners_label": "",
+    "settings_publishers": "",
+    "settings_publishers_icon": "",
+    "settings_publishers_info": "",
+    "settings_publishers_label": "",
+    "settings_readonly": "",
+    "settings_saved": "",
+    "settings_system_icon": "",
+    "settings_system_label": "",
+    "settings_update_item_warning": "",
+    "test_event_tooltip": ""
+}
--- a/front/php/templates/language/it_it.json
+++ b/front/php/templates/language/it_it.json
@@ -203,8 +203,8 @@
    "Device_MultiEdit_MassActions": "Azioni di massa:",
    "Device_MultiEdit_No_Devices": "Nessun dispositivo selezionato.",
    "Device_MultiEdit_Tooltip": "Attento. Facendo clic verrà applicato il valore sulla sinistra a tutti i dispositivi selezionati sopra.",
-    "Device_NextScan_Imminent": "imminente",
-    "Device_NextScan_In": "Prossima scansione in ",
+    "Device_NextScan_Imminent": "Imminente...",
+    "Device_NextScan_In": "Prossima scansione tra circa ",
    "Device_NoData_Help": "Se i dispositivi non vengono visualizzati dopo la scansione, controlla l'impostazione SCAN_SUBNETS e la <a href=\"https://docs.netalertx.com/SUBNETS\" target=\"_blank\">documentazione</a>.",
    "Device_NoData_Scanning": "In attesa della prima scansione: potrebbero volerci diversi minuti dopo la configurazione iniziale.",
    "Device_NoData_Title": "Ancora nessun dispositivo trovato",
@@ -804,4 +804,4 @@
    "settings_system_label": "Sistema",
    "settings_update_item_warning": "Aggiorna il valore qui sotto. Fai attenzione a seguire il formato precedente. <b>La convalida non viene eseguita.</b>",
    "test_event_tooltip": "Salva le modifiche prima di provare le nuove impostazioni."
-}
+}
--- a/front/php/templates/language/ja_jp.json
+++ b/front/php/templates/language/ja_jp.json
@@ -804,4 +804,4 @@
    "settings_system_label": "システム",
    "settings_update_item_warning": "以下の値を更新してください。以前のフォーマットに従うよう注意してください。<b>検証は行われません。</b>",
    "test_event_tooltip": "設定をテストする前に、まず変更を保存してください。"
-}
+}
--- a/front/php/templates/language/lang.php
+++ b/front/php/templates/language/lang.php
@@ -2,12 +2,13 @@

 // ###################################
 // ## Languages
+// ## Look-up here: http://www.lingoes.net/en/translator/langcode.htm
 // ###################################

 $defaultLang = "en_us";

 // Load the canonical language list from languages.json — do not hardcode here.
-$_langJsonPath = dirname(__FILE__) . '/languages.json';
+$_langJsonPath = dirname(__FILE__) . '/language_definitions/languages.json';
 $_langJson     = json_decode(file_get_contents($_langJsonPath), true);
 $allLanguages  = array_column($_langJson['languages'], 'code');

--- a/front/php/templates/language/language_definitions/languages.json
+++ b/front/php/templates/language/language_definitions/languages.json
@@ -8,6 +8,7 @@
        { "code": "en_us", "display": "English (en_us)" },
        { "code": "es_es", "display": "Spanish (es_es)" },
        { "code": "fa_fa", "display": "Farsi (fa_fa)" },
+        { "code": "id_id", "display": "Indonesian (id_id)" },
        { "code": "fr_fr", "display": "French (fr_fr)" },
        { "code": "it_it", "display": "Italian (it_it)" },
        { "code": "ja_jp", "display": "Japanese (ja_jp)" },
--- a/front/php/templates/language/merge_translations.py
+++ b/front/php/templates/language/merge_translations.py
@@ -46,7 +46,7 @@ def load_language_codes(languages_json_path):
 if __name__ == "__main__":
    current_path = os.path.dirname(os.path.abspath(__file__))
    # language codes are loaded from languages.json — add a new language there
-    languages_json = os.path.join(current_path, "languages.json")
+    languages_json = os.path.join(current_path, "language_definitions/languages.json")
    codes = load_language_codes(languages_json)
    file_paths = [os.path.join(current_path, f"{code}.json") for code in codes]
    merge_translations(file_paths[0], file_paths[1:])
--- a/front/php/templates/language/ru_ru.json
+++ b/front/php/templates/language/ru_ru.json
@@ -139,7 +139,7 @@
    "DevDetail_SessionTable_Duration": "Продолжительность",
    "DevDetail_SessionTable_IP": "IP",
    "DevDetail_SessionTable_Order": "Порядок",
-    "DevDetail_Shortcut_CurrentStatus": "Текущий статус",
+    "DevDetail_Shortcut_CurrentStatus": "Статус",
    "DevDetail_Shortcut_DownAlerts": "Оповещения о сбое",
    "DevDetail_Shortcut_Presence": "Присутствие",
    "DevDetail_Shortcut_Sessions": "Сеансы",
@@ -203,16 +203,16 @@
    "Device_MultiEdit_MassActions": "Массовые действия:",
    "Device_MultiEdit_No_Devices": "Устройства не выбраны.",
    "Device_MultiEdit_Tooltip": "Осторожно. При нажатии на эту кнопку значение слева будет применено ко всем устройствам, выбранным выше.",
-    "Device_NextScan_Imminent": "",
-    "Device_NextScan_In": "",
-    "Device_NoData_Help": "",
-    "Device_NoData_Scanning": "",
-    "Device_NoData_Title": "",
+    "Device_NextScan_Imminent": "Предстоящий...",
+    "Device_NextScan_In": "Следующее сканирование примерно через· ",
+    "Device_NoData_Help": "Если устройства не отображаются после сканирования, проверьте настройку SCAN_SUBNETS и <a href=\"https://docs.netalertx.com/SUBNETS\" target=\"_blank\">документацию</a>.",
+    "Device_NoData_Scanning": "Ожидание первого сканирования — это может занять несколько минут после первоначальной настройки.",
+    "Device_NoData_Title": "Устройства пока не найдены",
    "Device_Save_Failed": "Не удалось сохранить устройство",
    "Device_Save_Unauthorized": "Не авторизован - недействительный токен API",
    "Device_Saved_Success": "Устройство успешно сохранено",
    "Device_Saved_Unexpected": "Обновление устройства дало неожиданный ответ",
-    "Device_Scanning": "",
+    "Device_Scanning": "Сканирование...",
    "Device_Searchbox": "Поиск",
    "Device_Shortcut_AllDevices": "Мои устройства",
    "Device_Shortcut_AllNodes": "Все узлы",
@@ -224,7 +224,7 @@
    "Device_Shortcut_Favorites": "Избранные",
    "Device_Shortcut_NewDevices": "Новые устройства",
    "Device_Shortcut_OnlineChart": "Присутствие устройств",
-    "Device_Shortcut_Unstable": "",
+    "Device_Shortcut_Unstable": "Нестабильный",
    "Device_TableHead_AlertDown": "Оповещение о сост. ВЫКЛ",
    "Device_TableHead_Connected_Devices": "Соединения",
    "Device_TableHead_CustomProps": "Свойства / Действия",
@@ -322,7 +322,7 @@
    "Gen_AddDevice": "Добавить устройство",
    "Gen_Add_All": "Добавить все",
    "Gen_All_Devices": "Все устройства",
-    "Gen_Archived": "",
+    "Gen_Archived": "Архивировано",
    "Gen_AreYouSure": "Вы уверены?",
    "Gen_Backup": "Запустить резервное копирование",
    "Gen_Cancel": "Отмена",
@@ -333,7 +333,7 @@
    "Gen_Delete": "Удалить",
    "Gen_DeleteAll": "Удалить все",
    "Gen_Description": "Описание",
-    "Gen_Down": "",
+    "Gen_Down": "Лежит",
    "Gen_Error": "Ошибка",
    "Gen_Filter": "Фильтр",
    "Gen_Flapping": "",
@@ -342,7 +342,7 @@
    "Gen_Invalid_Value": "Введено некорректное значение",
    "Gen_LockedDB": "ОШИБКА - Возможно, база данных заблокирована. Проверьте инструменты разработчика F12 -> Консоль или повторите попытку позже.",
    "Gen_NetworkMask": "Маска сети",
-    "Gen_New": "",
+    "Gen_New": "Новый",
    "Gen_Offline": "Оффлайн",
    "Gen_Okay": "OK",
    "Gen_Online": "Онлайн",
@@ -360,7 +360,7 @@
    "Gen_SelectIcon": "<i class=\"fa-solid fa-chevron-down fa-fade\"></i>",
    "Gen_SelectToPreview": "Выберите для предварительного просмотра",
    "Gen_Selected_Devices": "Выбранные устройства:",
-    "Gen_Sleeping": "",
+    "Gen_Sleeping": "Спящий",
    "Gen_Subnet": "Подсеть",
    "Gen_Switch": "Переключить",
    "Gen_Upd": "Успешное обновление",
@@ -590,8 +590,8 @@
    "PIALERT_WEB_PROTECTION_name": "Включить вход",
    "PLUGINS_KEEP_HIST_description": "Сколько записей результатов сканирования истории плагинов следует хранить (для каждого плагина, а не для конкретного устройства).",
    "PLUGINS_KEEP_HIST_name": "История плагинов",
-    "PRAGMA_JOURNAL_SIZE_LIMIT_description": "",
-    "PRAGMA_JOURNAL_SIZE_LIMIT_name": "",
+    "PRAGMA_JOURNAL_SIZE_LIMIT_description": "Максимальный размер SQLite WAL (журнал упреждающей записи) в МБ перед запуском автоматических контрольных точек. Более низкие значения (10–20 МБ) уменьшают использование диска/хранилища, но увеличивают загрузку ЦП во время сканирования. Более высокие значения (50–100 МБ) уменьшают нагрузку на процессор во время операций, но могут использовать больше оперативной памяти и дискового пространства. Значение по умолчанию <code>50 МБ</code> компенсирует и то, и другое. Полезно для систем с ограниченными ресурсами, таких как устройства NAS с SD-картами. Перезапустите сервер, чтобы изменения вступили в силу после сохранения настроек.",
+    "PRAGMA_JOURNAL_SIZE_LIMIT_name": "Ограничение размера WAL (МБ)",
    "Plugins_DeleteAll": "Удалить все (фильтры игнорируются)",
    "Plugins_Filters_Mac": "Фильтр MAC-адреса",
    "Plugins_History": "История событий",
@@ -804,4 +804,4 @@
    "settings_system_label": "Система",
    "settings_update_item_warning": "Обновить значение ниже. Будьте осторожны, следуя предыдущему формату. <b>Проверка не выполняется.</b>",
    "test_event_tooltip": "Сначала сохраните изменения, прежде чем проверять настройки."
-}
+}
--- a/install/docker/docker-compose.dev.yml
+++ b/install/docker/docker-compose.dev.yml
@@ -13,6 +13,9 @@ services:
      - CHOWN
      - SETUID
      - SETGID
+    sysctls:
+      net.ipv4.conf.all.arp_ignore: 1
+      net.ipv4.conf.all.arp_announce: 2
    volumes:
      - type: volume
        source: netalertx_data
--- a/install/docker/docker-compose.yml
+++ b/install/docker/docker-compose.yml
@@ -13,6 +13,9 @@ services:
      - CHOWN
      - SETUID
      - SETGID
+    sysctls:
+      net.ipv4.conf.all.arp_ignore: 1
+      net.ipv4.conf.all.arp_announce: 2
    volumes:
      - type: volume
        source: netalertx_data
--- a/install/production-filesystem/entrypoint.d/36-override-individual-settings.sh
+++ b/install/production-filesystem/entrypoint.d/36-override-individual-settings.sh
@@ -9,28 +9,17 @@ if [ ! -f "${NETALERTX_CONFIG}/app.conf" ]; then
    exit 0
 fi

-# Helper: set or append config key safely
-set_config_value() {
-    _key="$1"
-    _value="$2"
-
-    # Remove newlines just in case
-    _value=$(printf '%s' "$_value" | tr -d '\n\r')
-
-    # Escape sed-sensitive chars
-    _escaped=$(printf '%s\n' "$_value" | sed 's/[\/&]/\\&/g')
-
-    if grep -q "^${_key}=" "${NETALERTX_CONFIG}/app.conf"; then
-        sed -i "s|^${_key}=.*|${_key}=${_escaped}|" "${NETALERTX_CONFIG}/app.conf"
-    else
-        echo "${_key}=${_value}" >> "${NETALERTX_CONFIG}/app.conf"
-    fi
-}
-
-# ------------------------------------------------------------
-# LOADED_PLUGINS override
-# ------------------------------------------------------------
 if [ -n "${LOADED_PLUGINS:-}" ]; then
    echo "[ENV] Applying LOADED_PLUGINS override"
-    set_config_value "LOADED_PLUGINS" "$LOADED_PLUGINS"
+    value=$(printf '%s' "$LOADED_PLUGINS" | tr -d '\n\r')
+    # declare delimiter for sed and escape it along with / and &
+    delim='|'
+    escaped=$(printf '%s\n' "$value" | sed "s/[\/${delim}&]/\\&/g")
+
+    if grep -q '^LOADED_PLUGINS=' "${NETALERTX_CONFIG}/app.conf"; then
+        # use same delimiter when substituting
+        sed -i "s${delim}^LOADED_PLUGINS=.*${delim}LOADED_PLUGINS=${escaped}${delim}" "${NETALERTX_CONFIG}/app.conf"
+    else
+        echo "LOADED_PLUGINS=${value}" >> "${NETALERTX_CONFIG}/app.conf"
+    fi
 fi
--- a/install/production-filesystem/entrypoint.d/37-host-optimization.sh
+++ b/install/production-filesystem/entrypoint.d/37-host-optimization.sh
@@ -1,92 +1,30 @@
 #!/bin/sh

-# 37-host-optimization.sh: Apply and validate network optimizations (ARP flux fix)
+# 37-host-optimization.sh: Detect ARP flux sysctl configuration.
 #
-# This script improves detection accuracy by ensuring proper ARP behavior.
-# It attempts to apply sysctl settings and warns if not possible.
+# This script does not change host/kernel settings.

-# --- Color Codes ---
-RED=$(printf '\033[1;31m')
 YELLOW=$(printf '\033[1;33m')
 RESET=$(printf '\033[0m')

-# --- Skip flag ---
-if [ -n "${SKIP_OPTIMIZATIONS:-}" ]; then
-    exit 0
-fi
-
-# --- Helpers ---
-
-get_sysctl() {
-    sysctl -n "$1" 2>/dev/null || echo "unknown"
-}
-
-set_sysctl_if_needed() {
-    key="$1"
-    expected="$2"
-
-    current="$(get_sysctl "$key")"
-
-    # Already correct
-    if [ "$current" = "$expected" ]; then
-        return 0
-    fi
-
-    # Try to apply
-    if sysctl -w "$key=$expected" >/dev/null 2>&1; then
-        return 0
-    fi
-
-    # Failed
-    return 1
-}
-
-# --- Apply Settings (best effort) ---
-
 failed=0

-set_sysctl_if_needed net.ipv4.conf.all.arp_ignore 1 || failed=1
-set_sysctl_if_needed net.ipv4.conf.all.arp_announce 2 || failed=1
-set_sysctl_if_needed net.ipv4.conf.default.arp_ignore 1 || failed=1
-set_sysctl_if_needed net.ipv4.conf.default.arp_announce 2 || failed=1
+[ "$(sysctl -n net.ipv4.conf.all.arp_ignore 2>/dev/null || echo unknown)" = "1" ] || failed=1
+[ "$(sysctl -n net.ipv4.conf.all.arp_announce 2>/dev/null || echo unknown)" = "2" ] || failed=1

-# --- Validate final state ---
-
-all_ignore="$(get_sysctl net.ipv4.conf.all.arp_ignore)"
-all_announce="$(get_sysctl net.ipv4.conf.all.arp_announce)"
-
-# --- Warning Output ---
-
-if [ "$all_ignore" != "1" ] || [ "$all_announce" != "2" ]; then
+if [ "$failed" -eq 1 ]; then
    >&2 printf "%s" "${YELLOW}"
-    >&2 cat <<EOF
+    >&2 cat <<'EOF'
 ══════════════════════════════════════════════════════════════════════════════
-⚠️  ATTENTION: ARP flux protection not enabled.
-
-    NetAlertX relies on ARP for device detection. Your system currently allows
-    ARP replies from incorrect interfaces (ARP flux), which may result in:
-
-      • False devices being detected
-      • IP/MAC mismatches
-      • Flapping device states
-      • Incorrect network topology
-
-    This is common when running in Docker or multi-interface environments.
-
-    ──────────────────────────────────────────────────────────────────────────
-    Recommended fix (Docker Compose):
-
-    sysctls:
-      net.ipv4.conf.all.arp_ignore: 1
-      net.ipv4.conf.all.arp_announce: 2
-
-    ──────────────────────────────────────────────────────────────────────────
-    Alternatively, apply on the host:
+⚠️  WARNING: ARP flux sysctls are not set.

+    Expected values:
      net.ipv4.conf.all.arp_ignore=1
      net.ipv4.conf.all.arp_announce=2

-    Detection accuracy may be reduced until this is configured.
+    Detection accuracy may be reduced until configured.
+
+    See: https://docs.netalertx.com/docker-troubleshooting/arp-flux-sysctls/
 ══════════════════════════════════════════════════════════════════════════════
 EOF
    >&2 printf "%s" "${RESET}"
--- a/install/production-filesystem/entrypoint.sh
+++ b/install/production-filesystem/entrypoint.sh
@@ -86,10 +86,11 @@ for script in "${ENTRYPOINT_CHECKS}"/*; do
    fi
    script_name=$(basename "$script" | sed 's/^[0-9]*-//;s/\.(sh|py)$//;s/-/ /g')
    echo "--> ${script_name} "
-	if [ -n "${SKIP_STARTUP_CHECKS:-}" ] && echo "${SKIP_STARTUP_CHECKS}" | grep -q "\b${script_name}\b"; then
-    printf "%sskip%s\n" "${GREY}" "${RESET}"
-		continue
-	fi
+    if [ -n "${SKIP_STARTUP_CHECKS:-}" ] &&
+       printf '%s' "${SKIP_STARTUP_CHECKS}" | grep -wFq -- "${script_name}"; then
+        printf "%sskip%s\n" "${GREY}" "${RESET}"
+        continue
+    fi

    "$script"
    NETALERTX_DOCKER_ERROR_CHECK=$?
--- a/install/production-filesystem/services/healthcheck.sh
+++ b/install/production-filesystem/services/healthcheck.sh
@@ -48,11 +48,13 @@ else
    log_error "python /app/server is not running"
 fi

-# 5. Check port 20211 is open and contains "netalertx"
-if curl -sf --max-time 10 "http://localhost:${PORT:-20211}" | grep -i "netalertx" > /dev/null; then
-    log_success "Port ${PORT:-20211} is responding and contains 'netalertx'"
+# 5. Check port 20211 is open
+CHECK_ADDR="${LISTEN_ADDR:-127.0.0.1}"
+[ "${CHECK_ADDR}" == "0.0.0.0" ] && CHECK_ADDR="127.0.0.1"
+if timeout 10 bash -c "</dev/tcp/${CHECK_ADDR}/${PORT:-20211}" 2>/dev/null; then
+    log_success "Port ${PORT:-20211} is responding"
 else
-    log_error "Port ${PORT:-20211} is not responding or doesn't contain 'netalertx'"
+    log_error "Port ${PORT:-20211} is not responding"
 fi

 # NOTE: GRAPHQL_PORT might not be set and is initailized as a setting with a default value in the container. It can also be initialized via APP_CONF_OVERRIDE 
@@ -71,4 +73,4 @@ else
    echo "[HEALTHCHECK] ❌ One or more health checks failed"
 fi

-exit $EXIT_CODE
+exit $EXIT_CODE
--- a/mkdocs.yml
+++ b/mkdocs.yml
@@ -20,6 +20,7 @@ nav:
        - Docker Updates: UPDATES.md
        - Docker Maintenance: DOCKER_MAINTENANCE.md
      - Docker Startup Troubleshooting:
+        - ARP flux sysctls: docker-troubleshooting/arp-flux-sysctls.md
        - Aufs capabilities: docker-troubleshooting/aufs-capabilities.md
        - Excessive capabilities: docker-troubleshooting/excessive-capabilities.md
        - File permissions: docker-troubleshooting/file-permissions.md
--- a/server/api_server/graphql_endpoint.py
+++ b/server/api_server/graphql_endpoint.py
@@ -85,7 +85,7 @@ class Device(ObjectType):
    devStatus = String(description="Online/Offline status")
    devIsRandomMac = Int(description="Calculated: Is MAC address randomized?")
    devParentChildrenCount = Int(description="Calculated: Number of children attached to this parent")
-    devIpLong = Int(description="Calculated: IP address in long format")
+    devIpLong = String(description="Calculated: IP address in long format (returned as string to support the full unsigned 32-bit range)")
    devFilterStatus = String(description="Calculated: Device status for UI filtering")
    devFQDN = String(description="Fully Qualified Domain Name")
    devParentRelType = String(description="Relationship type to parent")
@@ -200,13 +200,26 @@ class Query(ObjectType):
            mylog("none", f"[graphql_schema] Error loading devices data: {e}")
            return DeviceResult(devices=[], count=0)

+        # Int fields that may arrive from the DB as empty strings — coerce to None
+        _INT_FIELDS = [
+            "devFavorite", "devStaticIP", "devScan", "devLogEvents", "devAlertEvents",
+            "devAlertDown", "devSkipRepeated", "devPresentLastScan", "devIsNew",
+            "devIsArchived", "devReqNicsOnline", "devFlapping", "devCanSleep", "devIsSleeping",
+        ]
+
        # Add dynamic fields to each device
        for device in devices_data:
            device["devIsRandomMac"] = 1 if is_random_mac(device["devMac"]) else 0
            device["devParentChildrenCount"] = get_number_of_children(
                device["devMac"], devices_data
            )
-            device["devIpLong"] = format_ip_long(device.get("devLastIP", ""))
+            # Return as string — IPv4 long values can exceed Int's signed 32-bit max (2,147,483,647)
+            device["devIpLong"] = str(format_ip_long(device.get("devLastIP", "")))
+
+            # Coerce empty strings to None so GraphQL Int serialisation doesn't fail
+            for _field in _INT_FIELDS:
+                if device.get(_field) == "":
+                    device[_field] = None

        mylog("trace", f"[graphql_schema] devices_data: {devices_data}")

@@ -550,7 +563,7 @@ class Query(ObjectType):
        langStrings = []

        # --- CORE JSON FILES ---
-        language_folder = '/app/front/php/templates/language/'
+        language_folder = '/app/front/php/templates/language/language_definitions/'
        if os.path.exists(language_folder):
            for filename in os.listdir(language_folder):
                if filename.endswith('.json') and filename != 'languages.json':
--- a/server/api_server/languages_endpoint.py
+++ b/server/api_server/languages_endpoint.py
@@ -7,7 +7,7 @@ from logger import mylog

 INSTALL_PATH = os.getenv("NETALERTX_APP", "/app")
 LANGUAGES_JSON_PATH = os.path.join(
-    INSTALL_PATH, "front", "php", "templates", "language", "languages.json"
+    INSTALL_PATH, "front", "php", "templates", "language", "language_definitions", "languages.json"
 )


--- a/server/initialise.py
+++ b/server/initialise.py
@@ -27,7 +27,7 @@ from messaging.in_app import write_notification
 # ===============================================================================

 _LANGUAGES_JSON = os.path.join(
-    applicationPath, "front", "php", "templates", "language", "languages.json"
+    applicationPath, "front", "php", "templates", "language", "language_definitions" ,"languages.json"
 )


--- a/server/utils/datetime_utils.py
+++ b/server/utils/datetime_utils.py
@@ -115,24 +115,19 @@ def is_datetime_future(dt, current_threshold=None):
    return dt > current_threshold


-def ensure_future_datetime(schedule_obj, current_threshold=None, max_retries=5):
+def ensure_future_datetime(schedule_obj, current_threshold=None):
    """
    Ensure a schedule's next() call returns a datetime strictly in the future.

-    This is a defensive utility for cron/schedule libraries that should always return
-    future times but may have edge cases. Validates and retries if needed.
+    Keeps calling .next() until a future time is returned — never raises.

    Args:
        schedule_obj: A schedule object with a .next() method (e.g., from croniter/APScheduler)
        current_threshold: datetime to compare against. If None, uses timeNowTZ(as_string=False)
-        max_retries: Maximum times to call .next() if result is not in future (default: 5)

    Returns:
        datetime.datetime: A guaranteed future datetime from schedule_obj.next()

-    Raises:
-        RuntimeError: If max_retries exceeded without getting a future time
-
    Examples:
        newSchedule = Cron(run_sch).schedule(start_date=timeNowUTC(as_string=False))
        next_time = ensure_future_datetime(newSchedule)
@@ -141,17 +136,9 @@ def ensure_future_datetime(schedule_obj, current_threshold=None, max_retries=5):
        current_threshold = timeNowTZ(as_string=False)

    next_time = schedule_obj.next()
-    retries = 0

-    while next_time <= current_threshold and retries < max_retries:
+    while next_time <= current_threshold:
        next_time = schedule_obj.next()
-        retries += 1
-
-    if next_time <= current_threshold:
-        raise RuntimeError(
-            f"[ensure_future_datetime] Failed to get future time after {max_retries} retries. "
-            f"Last attempt: {next_time}, Current time: {current_threshold}"
-        )

    return next_time

--- a/test/api_endpoints/test_devices_endpoints.py
+++ b/test/api_endpoints/test_devices_endpoints.py
@@ -43,6 +43,10 @@ def create_dummy(client, api_token, test_mac):
    client.post(f"/device/{test_mac}", json=payload, headers=auth_headers(api_token))


+def delete_dummy(client, api_token, test_mac):
+    client.delete("/devices", json={"macs": [test_mac]}, headers=auth_headers(api_token))
+
+
 def test_get_all_devices(client, api_token, test_mac):
    # Ensure there is at least one device
    create_dummy(client, api_token, test_mac)
@@ -149,53 +153,62 @@ def test_export_import_cycle_base64(client, api_token, test_mac):


 def test_devices_totals(client, api_token, test_mac):
-    # 1. Create a dummy device
    create_dummy(client, api_token, test_mac)
+    try:
+        # 1. Call the totals endpoint
+        resp = client.get("/devices/totals", headers=auth_headers(api_token))
+        assert resp.status_code == 200

-    # 2. Call the totals endpoint
-    resp = client.get("/devices/totals", headers=auth_headers(api_token))
-    assert resp.status_code == 200
+        # 2. Ensure the response is a JSON list
+        data = resp.json
+        assert isinstance(data, list)

-    # 3. Ensure the response is a JSON list
-    data = resp.json
-    assert isinstance(data, list)
+        # 3. Dynamically get expected length
+        conditions = get_device_conditions()
+        expected_length = len(conditions)
+        assert len(data) == expected_length

-    # 4. Dynamically get expected length
-    conditions = get_device_conditions()
-    expected_length = len(conditions)
-    assert len(data) == expected_length
-
-    # 5. Check that at least 1 device exists
-    assert data[0] >= 1  # 'devices' count includes the dummy device
+        # 4. Check that at least 1 device exists when there are any conditions
+        if expected_length > 0:
+            assert data[0] >= 1  # 'devices' count includes the dummy device
+        else:
+            # no conditions defined; data should be an empty list
+            assert data == []
+    finally:
+        delete_dummy(client, api_token, test_mac)


 def test_devices_by_status(client, api_token, test_mac):
-    # 1. Create a dummy device
    create_dummy(client, api_token, test_mac)
+    try:
+        # 1. Request devices by a valid status
+        resp = client.get("/devices/by-status?status=my", headers=auth_headers(api_token))
+        assert resp.status_code == 200
+        data = resp.json
+        assert isinstance(data, list)
+        assert any(d["id"] == test_mac for d in data)

-    # 2. Request devices by a valid status
-    resp = client.get("/devices/by-status?status=my", headers=auth_headers(api_token))
-    assert resp.status_code == 200
-    data = resp.json
-    assert isinstance(data, list)
-    assert any(d["id"] == test_mac for d in data)
+        # 2. Request devices with an invalid/unknown status
+        resp_invalid = client.get("/devices/by-status?status=invalid_status", headers=auth_headers(api_token))
+        # Strict validation now returns 422 for invalid status enum values
+        assert resp_invalid.status_code == 422

-    # 3. Request devices with an invalid/unknown status
-    resp_invalid = client.get("/devices/by-status?status=invalid_status", headers=auth_headers(api_token))
-    # Strict validation now returns 422 for invalid status enum values
-    assert resp_invalid.status_code == 422
+        # 3. Check favorite formatting if devFavorite = 1
+        # Update dummy device to favorite
+        update_resp = client.post(
+            f"/device/{test_mac}",
+            json={"devFavorite": 1},
+            headers=auth_headers(api_token)
+        )
+        assert update_resp.status_code == 200
+        assert update_resp.json.get("success") is True

-    # 4. Check favorite formatting if devFavorite = 1
-    # Update dummy device to favorite
-    client.post(
-        f"/device/{test_mac}",
-        json={"devFavorite": 1},
-        headers=auth_headers(api_token)
-    )
-    resp_fav = client.get("/devices/by-status?status=my", headers=auth_headers(api_token))
-    fav_data = next((d for d in resp_fav.json if d["id"] == test_mac), None)
-    assert fav_data is not None
-    assert "&#9733" in fav_data["title"]
+        resp_fav = client.get("/devices/by-status?status=my", headers=auth_headers(api_token))
+        fav_data = next((d for d in resp_fav.json if d["id"] == test_mac), None)
+        assert fav_data is not None
+        assert "&#9733" in fav_data["title"]
+    finally:
+        delete_dummy(client, api_token, test_mac)


 def test_delete_test_devices(client, api_token):
--- a/test/api_endpoints/test_mcp_tools_endpoints.py
+++ b/test/api_endpoints/test_mcp_tools_endpoints.py
@@ -1,6 +1,7 @@
 import pytest
 from unittest.mock import patch, MagicMock
 from datetime import datetime
+import random

 from api_server.api_server_start import app
 from helper import get_setting_value
@@ -21,6 +22,31 @@ def auth_headers(token):
    return {"Authorization": f"Bearer {token}"}


+def create_dummy(client, api_token, test_mac):
+    payload = {
+        "createNew": True,
+        "devName": "Test Device MCP",
+        "devOwner": "Unit Test",
+        "devType": "Router",
+        "devVendor": "TestVendor",
+    }
+    response = client.post(f"/device/{test_mac}", json=payload, headers=auth_headers(api_token))
+    assert response.status_code in [200, 201], (
+        f"Expected status 200/201 for device creation, got {response.status_code}. "
+        f"Response body: {response.get_data(as_text=True)}"
+    )
+    return response
+
+
+def delete_dummy(client, api_token, test_mac):
+    response = client.delete("/devices", json={"macs": [test_mac]}, headers=auth_headers(api_token))
+    assert response.status_code == 200, (
+        f"Expected status 200 for device deletion, got {response.status_code}. "
+        f"Response body: {response.get_data(as_text=True)}"
+    )
+    return response
+
+
 # --- Device Search Tests ---


@@ -350,25 +376,22 @@ def test_mcp_devices_import_json(mock_db_conn, client, api_token):
 # --- MCP Device Totals Tests ---


-@patch("database.get_temp_db_connection")
-def test_mcp_devices_totals(mock_db_conn, client, api_token):
+def test_mcp_devices_totals(client, api_token):
    """Test MCP devices totals endpoint."""
-    mock_conn = MagicMock()
-    mock_sql = MagicMock()
-    mock_execute_result = MagicMock()
-    # Mock the getTotals method to return sample data
-    mock_execute_result.fetchone.return_value = [10, 8, 2, 0, 1, 3]  # devices, connected, favorites, new, down, archived
-    mock_sql.execute.return_value = mock_execute_result
-    mock_conn.cursor.return_value = mock_sql
-    mock_db_conn.return_value = mock_conn
+    test_mac = "aa:bb:cc:" + ":".join(f"{random.randint(0, 255):02X}" for _ in range(3)).lower()
+    create_dummy(client, api_token, test_mac)

-    response = client.get("/devices/totals", headers=auth_headers(api_token))
+    try:
+        response = client.get("/devices/totals", headers=auth_headers(api_token))

-    assert response.status_code == 200
-    data = response.get_json()
-    # Should return device counts as array
-    assert isinstance(data, list)
-    assert len(data) >= 4  # At least online, offline, etc.
+        assert response.status_code == 200
+        data = response.get_json()
+        # Should return device counts as array
+        assert isinstance(data, list)
+        assert len(data) >= 4  # At least online, offline, etc.
+        assert data[0] >= 1
+    finally:
+        delete_dummy(client, api_token, test_mac)


 # --- MCP Traceroute Tests ---
--- a/test/docker_tests/test_docker_compose_scenarios.py
+++ b/test/docker_tests/test_docker_compose_scenarios.py
@@ -317,14 +317,18 @@ def _select_custom_ports(exclude: set[int] | None = None) -> int:
    raise RuntimeError("Unable to locate a free high port for compose testing")


-def _make_port_check_hook(ports: tuple[int, ...]) -> Callable[[], None]:
+def _make_port_check_hook(
+    ports: tuple[int, ...],
+    settle_wait_seconds: int = COMPOSE_SETTLE_WAIT_SECONDS,
+    port_wait_timeout: int = COMPOSE_PORT_WAIT_TIMEOUT,
+) -> Callable[[], None]:
    """Return a callback that waits for the provided ports to accept TCP connections."""

    def _hook() -> None:
        for port in ports:
            LAST_PORT_SUCCESSES.pop(port, None)
-        time.sleep(COMPOSE_SETTLE_WAIT_SECONDS)
-        _wait_for_ports(ports, timeout=COMPOSE_PORT_WAIT_TIMEOUT)
+        time.sleep(settle_wait_seconds)
+        _wait_for_ports(ports, timeout=port_wait_timeout)

    return _hook

@@ -344,6 +348,7 @@ def _write_normal_startup_compose(

    service_env = service.setdefault("environment", {})
    service_env.setdefault("NETALERTX_CHECK_ONLY", "1")
+    service_env.setdefault("SKIP_STARTUP_CHECKS", "host optimization")

    if env_overrides:
        service_env.update(env_overrides)
@@ -852,12 +857,18 @@ def test_normal_startup_no_warnings_compose(tmp_path: pathlib.Path) -> None:
    default_project = "netalertx-normal-default"

    default_compose_file = _write_normal_startup_compose(default_dir, default_project, default_env_overrides)
+    port_check_timeout = 20
+    settle_wait_seconds = 2
    default_result = _run_docker_compose(
        default_compose_file,
        default_project,
        timeout=8,
        detached=True,
-        post_up=_make_port_check_hook(default_ports),
+        post_up=_make_port_check_hook(
+            default_ports,
+            settle_wait_seconds=settle_wait_seconds,
+            port_wait_timeout=port_check_timeout,
+        ),
    )
    # MANDATORY LOGGING - DO NOT REMOVE (see file header for reasoning)
    print("\n[compose output default]", default_result.output)
@@ -885,9 +896,14 @@ def test_normal_startup_no_warnings_compose(tmp_path: pathlib.Path) -> None:
        f"Unexpected mount row values for /data: {data_parts[2:4]}"
    )

+    allowed_warning = "⚠️  WARNING: ARP flux sysctls are not set."
+
    assert "Write permission denied" not in default_output
    assert "CRITICAL" not in default_output
-    assert "⚠️" not in default_output
+    assert all(
+        "⚠️" not in line or allowed_warning in line
+        for line in default_output.splitlines()
+    ), "Unexpected warning found in default output"

    custom_http = _select_custom_ports({default_http_port})
    custom_graphql = _select_custom_ports({default_http_port, custom_http})
@@ -913,7 +929,11 @@ def test_normal_startup_no_warnings_compose(tmp_path: pathlib.Path) -> None:
        custom_project,
        timeout=8,
        detached=True,
-        post_up=_make_port_check_hook(custom_ports),
+        post_up=_make_port_check_hook(
+            custom_ports,
+            settle_wait_seconds=settle_wait_seconds,
+            port_wait_timeout=port_check_timeout,
+        ),
    )
    print("\n[compose output custom]", custom_result.output)
    custom_output = _assert_ports_ready(custom_result, custom_project, custom_ports)
@@ -922,8 +942,16 @@ def test_normal_startup_no_warnings_compose(tmp_path: pathlib.Path) -> None:
    assert "❌" not in custom_output
    assert "Write permission denied" not in custom_output
    assert "CRITICAL" not in custom_output
-    assert "⚠️" not in custom_output
-    lowered_custom = custom_output.lower()
+    assert all(
+        "⚠️" not in line or allowed_warning in line
+        for line in custom_output.splitlines()
+    ), "Unexpected warning found in custom output"
+    custom_output_without_allowed_warning = "\n".join(
+        line
+        for line in custom_output.splitlines()
+        if allowed_warning.lower() not in line.lower()
+    )
+    lowered_custom = custom_output_without_allowed_warning.lower()
    assert "arning" not in lowered_custom
    assert "rror" not in lowered_custom

--- a/test/docker_tests/test_entrypoint.py
+++ b/test/docker_tests/test_entrypoint.py
@@ -8,6 +8,7 @@ such as environment variable settings and check skipping.
 import subprocess
 import uuid
 import pytest
+import shutil

 IMAGE = "netalertx-test"

@@ -85,8 +86,49 @@ def test_no_app_conf_override_when_no_graphql_port():

 def test_skip_startup_checks_env_var():
    # If SKIP_STARTUP_CHECKS contains the human-readable name of a check (e.g. "mandatory folders"),
-    # the entrypoint should skip that specific check. We check that the "Creating NetAlertX log directory." 
+    # the entrypoint should skip that specific check. We check that the "Creating NetAlertX log directory."
    # message (from the mandatory folders check) is not printed when skipped.
    result = _run_entrypoint(env={"SKIP_STARTUP_CHECKS": "mandatory folders"}, check_only=True)
    assert "Creating NetAlertX log directory" not in result.stdout
    assert result.returncode == 0
+
+
+@pytest.mark.docker
+@pytest.mark.feature_complete
+def test_host_optimization_warning_matches_sysctl():
+    """Validate host-optimization warning matches actual host sysctl values."""
+    sysctl_bin = shutil.which("sysctl")
+    if not sysctl_bin:
+        pytest.skip("sysctl binary not found on host; skipping host-optimization warning check")
+
+    ignore_proc = subprocess.run(
+        [sysctl_bin, "-n", "net.ipv4.conf.all.arp_ignore"],
+        capture_output=True,
+        text=True,
+        check=False,
+        timeout=10,
+    )
+    announce_proc = subprocess.run(
+        [sysctl_bin, "-n", "net.ipv4.conf.all.arp_announce"],
+        capture_output=True,
+        text=True,
+        check=False,
+        timeout=10,
+    )
+
+    if ignore_proc.returncode != 0 or announce_proc.returncode != 0:
+        pytest.skip("sysctl values unavailable on host; skipping host-optimization warning check")
+
+    arp_ignore = ignore_proc.stdout.strip()
+    arp_announce = announce_proc.stdout.strip()
+    expected_warning = not (arp_ignore == "1" and arp_announce == "2")
+
+    result = _run_entrypoint(check_only=True)
+    combined_output = result.stdout + result.stderr
+    warning_present = "WARNING: ARP flux sysctls are not set." in combined_output
+
+    assert warning_present == expected_warning, (
+        "host-optimization warning mismatch: "
+        f"arp_ignore={arp_ignore}, arp_announce={arp_announce}, "
+        f"expected_warning={expected_warning}, warning_present={warning_present}"
+    )
Author	SHA1	Message	Date
Safeguard	1d1a8045a0	Translated using Weblate (Russian) Currently translated at 99.7% (803 of 805 strings) Translation: NetAlertX/core Translate-URL: https://hosted.weblate.org/projects/pialert/core/ru/	2026-03-06 13:09:47 +00:00
Jokob @NetAlertX	f8c09d35a7	Enhance scan ETA display logic to reload data for newly discovered devices after scanning finishes	2026-03-05 20:24:57 +00:00
jokob-sk	d8d090404e	Merge branch 'main' of github.com:netalertx/NetAlertX	2026-03-05 18:51:05 +11:00
jokob-sk	5a6de6d832	LNG: moved languages.json so weblate skips it Signed-off-by: jokob-sk <jokob.sk@gmail.com>	2026-03-05 18:50:21 +11:00
Hosted Weblate	05b63cb730	Merge branch 'origin/main' into Weblate.	2026-03-05 08:33:52 +01:00
Safeguard	2921614eac	Translated using Weblate (Russian) Currently translated at 99.0% (797 of 805 strings) Translation: NetAlertX/core Translate-URL: https://hosted.weblate.org/projects/pialert/core/ru/	2026-03-05 08:33:51 +01:00
Massimo Pissarello	17d95d802f	Translated using Weblate (Italian) Currently translated at 100.0% (805 of 805 strings) Translation: NetAlertX/core Translate-URL: https://hosted.weblate.org/projects/pialert/core/it/	2026-03-05 08:33:50 +01:00
jokob-sk	a0048980b8	LNG: Indonesian Signed-off-by: jokob-sk <jokob.sk@gmail.com>	2026-03-05 18:33:36 +11:00
Jokob @NetAlertX	89811cd133	Merge pull request #1544 from adamoutler/built-in-tests Improve built-in test used during system startup - thanks @adamoutler 🙏	2026-03-05 06:48:46 +11:00
Adam Outler	b854206599	Address review comments from PR #1544	2026-03-04 14:36:31 +00:00
Adam Outler	a532c98115	Update test/docker_tests/test_entrypoint.py Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>	2026-03-03 23:22:11 -05:00
Adam Outler	da23880eb1	Update docs/docker-troubleshooting/arp-flux-sysctls.md Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>	2026-03-03 23:20:40 -05:00
Jokob @NetAlertX	c73ce839f2	Refactor ensure_future_datetime to simplify logic and remove max_retries parameter	2026-03-04 03:07:37 +00:00
Adam Outler	5c0f29b97c	coderabbit suggestions	2026-03-04 01:33:43 +00:00
Adam Outler	f1496b483b	Fix docker compose unit test to remove ARP FLUX warning.	2026-03-04 01:13:39 +00:00
Jokob @NetAlertX	ba26f34191	Enhance device section UI with collapsible filters and default collapse on mobile	2026-03-03 21:40:19 +00:00
Jokob @NetAlertX	37f8a44cb3	Update devIpLong field to String and handle empty string coercion for Int fields in devices data	2026-03-03 21:25:09 +00:00
Jokob @NetAlertX	76a259d9e5	Fix DataTable redraw logic and update empty message handling	2026-03-03 21:20:22 +00:00
Adam Outler	8ab9d9f395	Update docs	2026-03-02 19:43:38 +00:00
Adam Outler	c1d53ff93f	Update docker compose and unit tests	2026-03-02 19:43:28 +00:00
Adam Outler	a329c5b541	Tidy up plugin logic	2026-03-02 19:42:29 +00:00
Adam Outler	0555105473	Detect sysctls only, don't modify sysctls; allow user to modify.	2026-03-02 19:42:00 +00:00
Adam Outler	b0aa5d0e45	Fix startup script matching for skips	2026-03-02 19:41:06 +00:00
Adam Outler	93df52f70c	Fix healthcheck for non-0.0.0.0. will pass as long as reachable.	2026-03-02 19:39:23 +00:00