mirror of
https://github.com/openglow-org/forgefirm.git
synced 2026-10-15 17:19:55 -07:00
ScottW514
a0a4edb322
Rule 7 proved the button's pause/resume toggle on an armed job only, and nothing checked that the move resumed from the hold reaches its target. The catalog's motion.button-hold-resume held both on the machine with a travel job; it can leave the catalog once the host does. - test_button_pause_resume, after its armed half, runs the catalog's job: M5, G91, G1 X40 F300 (8 s). It must reach Run without asking for the arm press; a press holds it part-way; a second press resumes it to Idle within 0.05 mm of +40. - Rule 7's line in the header and the case's docstring say so. Proof: the case passes on a null-sink build of the grblHAL-glowforge working tree under Linux (the armed half as before; the travel job held at 8.747 mm and resumed to 39.999 mm). A control, the same job held and soft-reset instead of resumed, ends at 8.747 mm, which the landing check fails. pyflakes is clean. Acceptance: none. The harness runs in grblHAL-glowforge's CI.