mirror of
https://github.com/openglow-org/forgefirm.git
synced 2026-10-16 01:29:55 -07:00
ScottW514
ed52e752ee
The catalog follows forgectrl's setup (openglow-org/forgefirm#4): the gate is the advisories with the press, the account, the required steps (preferences, machine, cloud), and the intake fan count; every other step is recommended; the setup sheet is retired for two self-contained burns and a dark lens travel check; the override file is gone. - setup.gate-blocks-controllers installs four records: without consent, without the account, and without the three required steps the controller is gated with the reason naming the cause; with them done the gate opens, the controller runs, and the other steps are recommended as not run. Clearing cool_intake_fans closes the gate live with its reason, and putting it back as found reopens it. - setup.override-until-reboot is deleted with its helpers, and forgetest.init no longer writes the override file at boot. - setup.first-run-flow follows the reason from the three required steps to open; setup.first-run-page walks the choice screen after them; setup.what-changed reads the one-level map with the gate unmoved. - New setup.check-intakes (the count by the tachs equals the machine's, the setting put back as found) and setup.check-lens (the window written equals the stops found or the fallback, and the settings and /status hold it; both keys restored). A precheck refuses the intake and airflow checks while cool_intake_fans is unset, so neither can leave it unset in the middle of a campaign. - setup_burns.py replaces setup_sheet.py: setup.focus and setup.floor answer the gantry stops, the home, the scrap and the thickness, and keep the preview, emission and window checks; motion.tray starts the focus burn for its tray-out refusal. Proof: the forgetest host suite (529 before the required-steps edits, and the full suite after them) and the manifest load pass; pyflakes reports no undefined names. The coverage lint is clean against forgectrl's working tree; against the current pin, setup.check-lens's src/lensfind.* glob selects no file until the forgectrl pin moves to the commit that adds it. Acceptance: these are the tests themselves; the campaign runs them with cool_intake_fans set on the bench.
415 lines
20 KiB
Python
415 lines
20 KiB
Python
# Copyright 2026 514 LLC d/b/a OpenGlow
|
|
# Written by Scott Wiederhold
|
|
# https://community.openglow.org
|
|
# SPDX-License-Identifier: MIT
|
|
|
|
"""The setup's two burns in the catalog: two live tests on the button with
|
|
a scrap at hand, their covers naming the live runner, the renderer, the
|
|
sender, the page, and the driver's laser module; and each burn against a
|
|
scripted daemon: the preview and the program read, the start, the
|
|
prompts answered in order (the gantry stops, the head at home, the scrap,
|
|
its thickness in the machine's units, the arm, the machine's own press
|
|
prompt, the pick), the witnesses judged, the record read at version 1,
|
|
and the setting the burn wrote put back as found."""
|
|
import os
|
|
import sys
|
|
import unittest
|
|
|
|
sys.path.insert(0, os.path.dirname(__file__))
|
|
import helpers # noqa: E402
|
|
from forgetest import catalog # noqa: E402
|
|
from forgetest.runner import Context, Failed, Run # noqa: E402
|
|
from forgetest.suite import setup_burns, setup_dark # noqa: E402
|
|
|
|
LIVE = ["laser.focus", "laser.floor"]
|
|
EMISSION = {"hv_max": 610, "laser_on_samples": 900, "thermopile_delta": 600, "lit_s": 30.0}
|
|
SPM = 2.922 # the lens screw, half-steps per mm ($102)
|
|
EDGE_DEFAULT = 3.35 # the edge's height while the setting is unset (lens.h)
|
|
|
|
|
|
def lens_block(s):
|
|
"""The /status lens block as the daemon builds it from the settings: a
|
|
stop count from 1 to 40 stands, anything else is the fallback."""
|
|
def count(key, fallback):
|
|
try:
|
|
n = float(s.get(key, ""))
|
|
except ValueError:
|
|
return fallback, False
|
|
return (int(n), True) if 1 <= n <= 40 else (fallback, False)
|
|
try:
|
|
edge = float(s.get("lens_hall_edge_z_mm", ""))
|
|
except ValueError:
|
|
edge = EDGE_DEFAULT
|
|
below, a = count("lens_stop_below_steps", 10)
|
|
above, b = count("lens_stop_above_steps", 12)
|
|
return {"edge_z": round(edge, 2), "below": below, "above": above, "stops_found": a and b,
|
|
"reach_min": round(edge - below / SPM, 2), "reach_max": round(edge + above / SPM, 2)}
|
|
|
|
|
|
def ladder_z(edge, below, above):
|
|
"""The focus ladder the daemon builds: twelve whole half-steps from
|
|
the top of the window to the bottom."""
|
|
return [round(edge + round(above - (above + below) * i / 11) / SPM, 2) for i in range(12)]
|
|
|
|
|
|
# Each burn as the daemon runs it: its prompts in order (id, kind,
|
|
# options) and the result it ends with. The press prompt is the
|
|
# machine's own: nothing answers it, the discharge closes it. The focus
|
|
# burn's window and ladder are the ones the settings held at its start.
|
|
SETUP = [("gantry-stops", "confirm", ["Yes", "No"]),
|
|
("home", "choice", ["The head is home", "Release the motors"]),
|
|
("scrap", "continue", ["Continue"]), ("thickness", "number", ["Set"])]
|
|
PRESS = ("press", "wait", [])
|
|
SCRIPT = {
|
|
"laser.focus": (SETUP + [("focus-arm", "continue", ["Continue"]), PRESS,
|
|
("focus-pick", "multichoice", [str(i) for i in range(1, 13)])],
|
|
{"z_passes": [100, 101], "emission": EMISSION, "pick": 11, "picked_lines": [11, 11],
|
|
"pick_half_steps": -8, "edge_z_mm": 6.96, "steps_per_mm": SPM, "max_height_mm": 13.81,
|
|
"focus_range_mm": {"min": 2.17, "max": 13.81}, "summary": "Line 11."}),
|
|
"laser.floor": (SETUP + [("floor-arm", "continue", ["Continue"]), PRESS,
|
|
("floor-pick", "choice", [str(2 * i) for i in range(1, 13)] + ["None"])],
|
|
{"z_passes": [100, 101], "emission": EMISSION, "faintest_density": 8.0,
|
|
"floor_density": 10.0, "summary": "The floor is 10."}),
|
|
}
|
|
# What each burn writes when it ends.
|
|
WRITES = {"laser.focus": {"lens_hall_edge_z_mm": "6.96"}, "laser.floor": {"laser_floor_density": "10"}}
|
|
# The machine as the burns find it: its own edge, the window the Lens
|
|
# travel check wrote, its floor.
|
|
FOUND = {"lens_hall_edge_z_mm": "4.10", "lens_stop_below_steps": "14", "lens_stop_above_steps": "20",
|
|
"laser_floor_density": "12", "ui_units": "metric"}
|
|
HOME = "The head is home"
|
|
|
|
|
|
class RegistrationTests(unittest.TestCase):
|
|
def setUp(self):
|
|
self.reg = catalog.load_suite()
|
|
|
|
def test_two_live_tests_on_the_button_with_a_scrap_at_hand(self):
|
|
for tid in ("setup.focus", "setup.floor"):
|
|
t = self.reg[tid]
|
|
self.assertEqual(t.kind, "live", tid)
|
|
self.assertEqual(t.mode, "grbl", tid)
|
|
self.assertEqual(t.hardware, "takeover", tid)
|
|
self.assertEqual(list(t.actions), ["button"], tid)
|
|
self.assertEqual(list(t.hands), ["scrap"], tid)
|
|
self.assertFalse(t.fixture_runnable(("button", "lid", "interlock")), tid)
|
|
self.assertIsNone(getattr(t, "precheck", None), tid)
|
|
self.assertEqual(list(self.reg["setup.focus"].requires),
|
|
["forgectrl.auth", "setup.check-motion", "laser.emission-witness", "setup.check-lens"])
|
|
self.assertEqual(list(self.reg["setup.floor"].requires),
|
|
["forgectrl.auth", "setup.check-motion", "laser.emission-witness"])
|
|
|
|
def test_the_sheet_is_gone(self):
|
|
self.assertFalse([i for i in self.reg if i.startswith("setup.sheet")])
|
|
|
|
def test_covers_the_live_runner_the_renderer_the_sender_the_page_and_the_driver(self):
|
|
for tid in ("setup.focus", "setup.floor"):
|
|
covers = set(self.reg[tid].covers)
|
|
for want in (("forgectrl", "src/wizlive.*"), ("forgectrl", "src/sheet.*"),
|
|
("forgectrl", "src/jobstream.*"), ("forgectrl", "src/curverec.*"),
|
|
("forgectrl", "src/font_hershey.*"), ("forgectrl", "src/lens.*"),
|
|
("forgectrl", "src/ui/wizard.*"), ("forgectrl", "src/wizrun.h"),
|
|
("grblhal-glowforge", "src/glowforge_laser.c")):
|
|
self.assertIn(want, covers, "%s lacks %s" % (tid, want))
|
|
|
|
def test_the_steps_ask_for_a_scrap_in_the_corner_and_one_press(self):
|
|
for tid, size in (("setup.focus", "78 x 68 mm"), ("setup.floor", "86 x 68 mm")):
|
|
text = " ".join(self.reg[tid].steps)
|
|
self.assertIn(size, text, tid)
|
|
self.assertIn("back-left corner", text, tid)
|
|
self.assertIn("gantry stops", text, tid)
|
|
self.assertIn("press the machine's button once", text, tid)
|
|
|
|
|
|
class ScriptedDaemon:
|
|
"""The wizard runner as the suite sees it: /wiz/<id>/start opens the
|
|
first prompt, each answer opens the next (a thickness out of range in
|
|
the machine's units opens it again), the press prompt closes on the
|
|
poll after the one that served it, the last answer ends the burn with
|
|
its result and its writes, /wiz/dark reports it, GET /wiz carries the
|
|
versions, and the preview and the program are served per burn."""
|
|
|
|
def __init__(self, fake):
|
|
self.fake = fake
|
|
fake.state["settings"].update(FOUND)
|
|
self.dark = {"id": "", "running": False, "phase": "", "progress": 0, "elapsed_s": 0,
|
|
"log": [], "prompt": None, "result": None, "error": "",
|
|
"shots": {"lid": False, "head": False}}
|
|
self.versions = {}
|
|
self.answers = {} # wid -> [values]
|
|
self.order = [] # the burns as started
|
|
self.aborted = []
|
|
self.settings_at_start = {}
|
|
self.previews = []
|
|
self.queue = []
|
|
self.seq = 0
|
|
self.press_seen = False
|
|
self.thickness = None
|
|
self.lens_at_start = None
|
|
self.units = None # the units the number prompts read; None = ui_units
|
|
self.start_writes = {} # wid -> settings the burn writes as it starts
|
|
self.patch = {} # wid -> result fields that differ from the script
|
|
self.stray_z = None # a Z the served program commands beyond the reach, when set
|
|
fake.on_get = self.on_get
|
|
fake.on_post = self.on_post
|
|
|
|
def open_next(self):
|
|
if not self.queue:
|
|
return False
|
|
pid, kind, options = self.queue[0]
|
|
self.seq += 1
|
|
self.dark["prompt"] = {"seq": self.seq, "id": pid, "kind": kind, "text": pid, "options": options}
|
|
return True
|
|
|
|
def finish(self, wid):
|
|
s = self.fake.state["settings"]
|
|
r = dict(SCRIPT[wid][1], thickness_mm=round(self.thickness, 3))
|
|
if wid == "laser.focus":
|
|
lens = self.lens_at_start
|
|
r["window"] = {k: lens[k] for k in ("below", "above", "reach_min", "reach_max")}
|
|
r["ladder_z"] = ladder_z(lens["edge_z"], lens["below"], lens["above"])
|
|
r.update(self.patch.get(wid, {}))
|
|
s.update(WRITES[wid])
|
|
self.dark.update({"running": False, "prompt": None, "progress": 100, "result": r})
|
|
self.versions[wid] = 1
|
|
|
|
def on_get(self, path, q):
|
|
s = self.fake.state["settings"]
|
|
if path == "/status":
|
|
# the lens block follows the settings, as the daemon's does
|
|
return 200, dict(self.fake.state["status"], lens=lens_block(s))
|
|
if path == "/wiz/dark":
|
|
p = self.dark.get("prompt")
|
|
if p and p["id"] == "press":
|
|
if self.press_seen:
|
|
self.press_seen = False
|
|
self.queue.pop(0)
|
|
if not self.open_next():
|
|
self.finish(self.dark["id"])
|
|
else:
|
|
self.press_seen = True
|
|
return 200, dict(self.dark)
|
|
if path == "/wiz":
|
|
return 200, {"versions": dict(self.versions), "recommended": [], "completed": True}
|
|
if path == "/wiz/sheet.svg":
|
|
self.previews.append(q.get("card"))
|
|
if q.get("card") not in LIVE:
|
|
return 404, {"error": "no such card"}
|
|
return 200, b"<svg xmlns='http://www.w3.org/2000/svg'></svg>", "image/svg+xml"
|
|
if path == "/wiz/sheet.gcode":
|
|
# the text is M4 at the mark dose, as the daemon serves it; the
|
|
# head's Z is the edge, the tail goes back to it, and the focus
|
|
# ladder spans the window the settings hold now
|
|
lens = lens_block(s)
|
|
lines = ["; mock", "G0 Z%.2f" % lens["edge_z"], "M4 S400", "G0 X12 Y12", "G1 X40 Y12 F3000"]
|
|
if q.get("card") == "laser.focus":
|
|
lines += ["G0 Z%.2f" % z for z in ladder_z(lens["edge_z"], lens["below"], lens["above"])]
|
|
if self.stray_z is not None:
|
|
lines.append("G0 Z%.2f" % self.stray_z)
|
|
lines += ["M5", "G0 Z%.2f" % lens["edge_z"], "G0 X0 Y0", "M2"]
|
|
return 200, ("\n".join(lines) + "\n").encode(), "text/plain"
|
|
return None
|
|
|
|
def on_post(self, path, form):
|
|
s = self.fake.state["settings"]
|
|
if path.startswith("/wiz/") and path.endswith("/start"):
|
|
wid = path[len("/wiz/"):-len("/start")]
|
|
if wid not in SCRIPT:
|
|
return 404, {"error": "no such wizard"}
|
|
self.order.append(wid)
|
|
self.settings_at_start[wid] = dict(s)
|
|
s.update(self.start_writes.get(wid, {}))
|
|
self.lens_at_start = lens_block(s)
|
|
self.queue = list(SCRIPT[wid][0])
|
|
self.press_seen = False
|
|
self.dark.update({"id": wid, "running": True, "phase": "starting", "result": None, "error": ""})
|
|
self.open_next()
|
|
return 200, {"started": True, "id": wid}
|
|
if path.startswith("/wiz/") and path.endswith("/answer"):
|
|
wid = path[len("/wiz/"):-len("/answer")]
|
|
p = self.dark.get("prompt")
|
|
if not p or form.get("seq") != str(p["seq"]):
|
|
return 409, {"error": "no such prompt is open"}
|
|
value = form.get("value")
|
|
self.answers.setdefault(wid, []).append(value)
|
|
if p["id"] == "thickness":
|
|
imperial = (self.units or s.get("ui_units")) == "imperial"
|
|
mm = float(value) * (25.4 if imperial else 1.0)
|
|
if not 0 < mm <= 30:
|
|
self.open_next() # the same prompt again, a new sequence number
|
|
return 200, {"ok": True}
|
|
self.thickness = mm
|
|
self.queue.pop(0)
|
|
if not self.open_next():
|
|
self.finish(wid)
|
|
return 200, {"ok": True}
|
|
if path.startswith("/wiz/") and path.endswith("/abort"):
|
|
self.aborted.append(path[len("/wiz/"):-len("/abort")])
|
|
self.dark.update({"running": False, "prompt": None, "error": "aborted"})
|
|
return 200, {"ok": True}
|
|
if path == "/settings":
|
|
for k, v in form.items():
|
|
if v == "":
|
|
s.pop(k, None)
|
|
else:
|
|
s[k] = v
|
|
return 200, dict(s)
|
|
return None
|
|
|
|
|
|
class BurnRunTests(unittest.TestCase):
|
|
def setUp(self):
|
|
self.fake = helpers.FakeForgectrl().start()
|
|
self.daemon = ScriptedDaemon(self.fake)
|
|
self.poll = setup_dark.POLL_S
|
|
setup_dark.POLL_S = 0.01
|
|
|
|
def tearDown(self):
|
|
setup_dark.POLL_S = self.poll
|
|
self.fake.stop()
|
|
|
|
def run_test(self, tid):
|
|
t = catalog.load_suite()[tid]
|
|
run = Run("test", t.id, t.title)
|
|
run.unattended = True # the ready gate passes; the arm cue is a notice
|
|
t.fn(Context(run, None, t))
|
|
return run
|
|
|
|
def assert_found(self, keys=None):
|
|
s = self.fake.state["settings"]
|
|
for k, v in FOUND.items():
|
|
if keys is None or k in keys:
|
|
self.assertEqual(s.get(k), v, k)
|
|
|
|
def test_the_focus_burn_in_the_lens_travel_window(self):
|
|
run = self.run_test("setup.focus")
|
|
d = self.daemon
|
|
self.assertEqual(d.order, ["laser.focus"])
|
|
self.assertEqual(d.answers["laser.focus"], ["Yes", HOME, "Continue", "3.2", "Continue", "11"])
|
|
self.assertEqual(d.previews, ["laser.focus", "laser.focus"]) # before the burn, and after it
|
|
# a fresh head's focus: the edge cleared, the window the Lens travel check's
|
|
start = d.settings_at_start["laser.focus"]
|
|
self.assertNotIn("lens_hall_edge_z_mm", start)
|
|
self.assertEqual((start["lens_stop_below_steps"], start["lens_stop_above_steps"]), ("14", "20"))
|
|
self.assertEqual(run.evidence["result"]["emission"]["hv_max"], 610)
|
|
fw = run.evidence["focus_window"]
|
|
self.assertEqual(fw["window"]["below"], 14)
|
|
self.assertEqual(fw["window"]["above"], 20)
|
|
self.assertEqual(fw["edge"], "6.96")
|
|
self.assertEqual(fw["program_z_before"]["reach"], [-1.44, 10.19]) # the default edge
|
|
self.assertEqual(fw["program_z_after"]["reach"], [2.17, 13.8]) # the edge the burn wrote
|
|
self.assertEqual(len(fw["program_z_after"]["z"]), 14) # head, twelve lines, tail
|
|
self.assertEqual(run.evidence["settings_before"],
|
|
{k: FOUND[k] for k in ("lens_hall_edge_z_mm", "lens_stop_below_steps",
|
|
"lens_stop_above_steps")})
|
|
self.assert_found() # restored
|
|
|
|
def test_the_focus_burn_in_the_fallback_window(self):
|
|
# A head the Lens travel check has not measured: the settings hold
|
|
# no window, so the ladder runs in the fallback and the burn leaves
|
|
# the keys unset.
|
|
s = self.fake.state["settings"]
|
|
s.pop("lens_stop_below_steps")
|
|
s.pop("lens_stop_above_steps")
|
|
run = self.run_test("setup.focus")
|
|
fw = run.evidence["focus_window"]
|
|
self.assertEqual((fw["window"]["below"], fw["window"]["above"]), setup_dark.FALLBACK_WINDOW)
|
|
self.assertNotIn("lens_stop_below_steps", s)
|
|
self.assertNotIn("lens_stop_above_steps", s)
|
|
self.assertEqual(s["lens_hall_edge_z_mm"], "4.10")
|
|
|
|
def test_the_floor_burn(self):
|
|
run = self.run_test("setup.floor")
|
|
d = self.daemon
|
|
self.assertEqual(d.order, ["laser.floor"])
|
|
self.assertEqual(d.answers["laser.floor"], ["Yes", HOME, "Continue", "3.2", "Continue", "8"])
|
|
self.assertEqual(d.previews, ["laser.floor"])
|
|
self.assertEqual(run.evidence["result"]["floor_density"], 10.0)
|
|
self.assertEqual(run.evidence["settings_before"], {"laser_floor_density": "12"})
|
|
self.assert_found()
|
|
|
|
def test_imperial_units_answer_the_thickness_in_inches(self):
|
|
# The number prompts read ui_units: on an imperial machine the
|
|
# thickness is 0.125 in and the record carries 3.175 mm.
|
|
self.fake.state["settings"]["ui_units"] = "imperial"
|
|
run = self.run_test("setup.floor")
|
|
self.assertEqual(self.daemon.answers["laser.floor"][3], "0.125")
|
|
self.assertEqual(run.evidence["thickness_answer"], "0.125")
|
|
self.assertEqual(run.evidence["result"]["thickness_mm"], 3.175)
|
|
|
|
def test_a_thickness_the_burn_refuses_ends_it_before_anything_fires(self):
|
|
# 3.2 read as inches is over the 30 mm cap, and the burn asks again:
|
|
# the test ends the burn rather than answer the same thing forever.
|
|
self.daemon.units = "imperial"
|
|
with self.assertRaises(Failed) as cm:
|
|
self.run_test("setup.floor")
|
|
self.assertIn("asked thickness again", str(cm.exception))
|
|
self.assertEqual(self.daemon.answers["laser.floor"], ["Yes", HOME, "Continue", "3.2"])
|
|
self.assertEqual(self.daemon.aborted, ["laser.floor"])
|
|
self.assert_found()
|
|
|
|
def test_a_prompt_the_test_does_not_answer_ends_the_burn(self):
|
|
# The motors found released: the burn asks for the head pushed home
|
|
# by hand, which the bench never needs.
|
|
SCRIPT["laser.floor"][0].insert(1, ("home-push", "continue", ["Continue"]))
|
|
try:
|
|
with self.assertRaises(Failed) as cm:
|
|
self.run_test("setup.floor")
|
|
finally:
|
|
SCRIPT["laser.floor"][0].pop(1)
|
|
self.assertIn("asked home-push, which the test does not answer", str(cm.exception))
|
|
self.assertEqual(self.daemon.aborted, ["laser.floor"])
|
|
self.assert_found()
|
|
|
|
def test_a_dark_burn_fails_and_still_restores(self):
|
|
self.daemon.patch["laser.floor"] = {"emission": {"hv_max": 0, "laser_on_samples": 0, "thermopile_delta": 0}}
|
|
with self.assertRaises(Failed) as cm:
|
|
self.run_test("setup.floor")
|
|
self.assertIn("the tube current never rose", str(cm.exception))
|
|
self.assert_found()
|
|
|
|
def test_a_focus_burn_that_writes_the_window_fails(self):
|
|
# The focus burn writes the edge alone: the window is the Lens
|
|
# travel check's. A burn that moves it fails, and it goes back.
|
|
self.daemon.start_writes["laser.focus"] = {"lens_stop_below_steps": "16", "lens_stop_above_steps": "22"}
|
|
with self.assertRaises(Failed) as cm:
|
|
self.run_test("setup.focus")
|
|
self.assertIn("the focus burn wrote the lens window", str(cm.exception))
|
|
self.assert_found()
|
|
|
|
def test_a_focus_ladder_outside_the_window_held_fails(self):
|
|
self.daemon.patch["laser.focus"] = {"window": {"below": 10, "above": 12, "reach_min": -0.07,
|
|
"reach_max": 7.46}}
|
|
with self.assertRaises(Failed) as cm:
|
|
self.run_test("setup.focus")
|
|
self.assertIn("the ladder ran in 10/12", str(cm.exception))
|
|
self.assert_found()
|
|
|
|
def test_a_focus_burn_that_reports_a_stop_search_fails(self):
|
|
self.daemon.patch["laser.focus"] = {"stops": {"found": True, "below": 14, "above": 20}}
|
|
with self.assertRaises(Failed) as cm:
|
|
self.run_test("setup.focus")
|
|
self.assertIn("searched for the stops", str(cm.exception))
|
|
self.assert_found()
|
|
|
|
def test_a_program_z_beyond_the_reach_fails_before_the_burn(self):
|
|
# A served program that commands a Z the lens does not reach is
|
|
# refused before the burn starts: nothing burns.
|
|
self.daemon.stray_z = 12.6
|
|
with self.assertRaises(Failed) as cm:
|
|
self.run_test("setup.floor")
|
|
self.assertIn("outside the lens window", str(cm.exception))
|
|
self.assertIn("12.6", str(cm.exception))
|
|
self.assertEqual(self.daemon.order, [])
|
|
self.assert_found()
|
|
|
|
def test_the_result_keys_the_tests_require(self):
|
|
# every key either test reads is one the scripted burn reports
|
|
self.assertTrue(set(setup_burns.FLOOR_KEYS) <= set(SCRIPT["laser.floor"][1]) | {"thickness_mm"})
|
|
self.assertTrue(set(setup_burns.FOCUS_KEYS)
|
|
<= set(SCRIPT["laser.focus"][1]) | {"thickness_mm", "window", "ladder_z"})
|
|
|
|
|
|
if __name__ == "__main__":
|
|
unittest.main()
|