ScottW514
c47f7d9a86
laser.disarm-in-hold streams a 40 mm move, feed-holds it two seconds in, waits out the disarm grace, and then resets out of the hold. The recovery put the laser and the controller back and left the head where the hold had caught it: 11.34 mm along on the bench reference, 605 counts, which the hand-back jogged out and reported. The head goes back now, by the distance it actually travelled rather than the distance the move asked for: the hold catches it at a slightly different point every run - ten millimetres nominal at F300 for two seconds, 11.34 measured - so the kernel counters before the move and after the reset are what the return jog is built from. Where it stopped and where it ended go into the evidence. This is not the fault the M5 rapid job had. That job's moves netted plus twenty by construction; this one stops part-way on purpose, and the recovery simply never returned it. laser.armed-kill has the same shape, a kill mid-fire that stops the head where it stops, and is left alone until a run says whether it needs the same treatment.
forgetest - the ForgeFIRM release acceptance tool
The daemon behind http://<machine>:8090/ on the dev image: runs the
acceptance catalog against the machine, keeps the append-only result log,
decides which results still apply to the image that is running, exports
the release artifact scripts/release.sh gates on, and serves the bench
diagnostics page. The contract - catalog, campaigns, fingerprints,
inheritance, the gate, the coverage rule - is
the Acceptance page of the documentation site.
Run the host tests
cd forgetest
python3 -m unittest discover -s tests -v
Run the daemon on a workstation (against a mock or a manifest file)
FORGETEST_DATA=/tmp/ft FORGETEST_MANIFEST=../tree-manifest.json \
FORGECTRL_URL=http://<machine> python3 -m forgetest --port 8090
scripts/manifest-from-tree.py produces tree-manifest.json from the recipe
pins; the coverage lint is python3 -m forgetest.coverage --manifest ....
Environment
| Variable | Default | Purpose |
|---|---|---|
FORGETEST_DATA |
/data/forgetest |
results.jsonl, bench.jsonl, token, export/ |
FORGETEST_MANIFEST |
/etc/forgefirm-manifest.json |
the image manifest |
FORGETEST_PORT, FORGETEST_HOST |
8090, 0.0.0.0 | listener |
FORGETEST_BENCH_DIR |
/usr/share/forgetest/bench |
the installed bench scripts |
FORGETEST_BENCH_DATA |
<FORGETEST_DATA>/bench |
passed to bench tools: where they keep their data files (with GF_HOST=127.0.0.1 and the panel token in GF_TOKEN) |
FORGETEST_MARKER |
/run/forgetest.active |
takeover marker |
FORGECTRL_URL, FORGECTRL_TOKEN_FILE |
http://127.0.0.1, /data/forgefirm/panel.token |
forgectrl client (HTTP; the token authorizes writes from the board) |
FORGECTRL_TLS_URL |
https://127.0.0.1 |
forgectrl over HTTPS (self-signed, unverified), for the login test |
GF_SYSFS_ROOT |
/sys/glowforge/ |
kernel module sysfs |
GRBL_HOST, GRBL_PORT |
127.0.0.1, 23 | Grbl TCP |
Adding a test
Register it in the subsystem module under forgetest/suite/ with
@test(...): id subsystem.name, kind, hardware, mode (the controller
mode the test needs; the runner switches to it first), covers,
requires, always, steps. The body gets a Context (log, check, fail,
prompt, confirm, instruct, sleep, evidence, forgectrl, sysfs,
grbl, takeover). Return normally for PASS, raise runner.Failed for
FAIL. Then run the unit tests and the coverage lint.