mirror of
https://github.com/openglow-org/forgefirm.git
synced 2026-09-27 08:41:13 -07:00
126 lines
4.7 KiB
YAML
126 lines
4.7 KiB
YAML
# ============================================================================
|
|
# ForgeFIRM — kas build configuration (factory Glowforge control board)
|
|
# ============================================================================
|
|
# The forgefirm repo is the BASE: it controls the build, the output firmware
|
|
# images land here (build/tmp/deploy/images/glowforge/), and the build/install
|
|
# docs live here (BUILD.md, INSTALL.md, SERIAL.md, kas/README.md).
|
|
#
|
|
# Target : Yocto Scarthgap (5.0 LTS) + linux-fslc 6.12 (mainline LTS)
|
|
# Machine: glowforge (i.MX6 Solo SOM inside Basic/Plus/Pro)
|
|
# Distro : forgefirm
|
|
#
|
|
# kas generates bblayers.conf and local.conf.
|
|
#
|
|
# Run from the forgefirm repo root so outputs land inside it:
|
|
# cd forgefirm
|
|
# kas build kas/forgefirm-glowforge.yml # fetch layers + full build
|
|
# kas shell kas/forgefirm-glowforge.yml # interactive bitbake env
|
|
# kas dump kas/forgefirm-glowforge.yml # show resolved config
|
|
#
|
|
# Reproducible pins (after first checkout):
|
|
# kas lock kas/forgefirm-glowforge.yml # writes kas/forgefirm-glowforge.lock.yml
|
|
# ============================================================================
|
|
|
|
header:
|
|
version: 14
|
|
|
|
machine: glowforge
|
|
distro: forgefirm
|
|
target: forgefirm-image
|
|
|
|
# kas uses KAS_WORK_DIR (the dir you run kas from = the forgefirm repo root).
|
|
# Upstream layers are cloned into ./layers/, the build runs in ./build/, and
|
|
# caches go in ./downloads + ./sstate-cache — all gitignored, all inside forgefirm.
|
|
repos:
|
|
|
|
# --- This repo (forgefirm) — auto-detected, no url/path needed -------------
|
|
forgefirm:
|
|
layers:
|
|
meta-forgefirm:
|
|
|
|
# --- Upstream layers (cloned + pinned to the scarthgap branch by kas) ------
|
|
|
|
poky:
|
|
url: https://git.yoctoproject.org/poky.git
|
|
branch: scarthgap
|
|
path: layers/poky
|
|
layers:
|
|
meta:
|
|
meta-poky:
|
|
|
|
meta-openembedded:
|
|
url: https://github.com/openembedded/meta-openembedded.git
|
|
branch: scarthgap
|
|
path: layers/meta-openembedded
|
|
layers:
|
|
meta-oe:
|
|
meta-python:
|
|
meta-networking:
|
|
|
|
meta-freescale:
|
|
url: https://github.com/Freescale/meta-freescale.git
|
|
branch: scarthgap
|
|
path: layers/meta-freescale
|
|
layers:
|
|
.:
|
|
|
|
meta-freescale-distro:
|
|
# Provides conf/distro/include/fslc-base.inc, required by the forgefirm distro.
|
|
url: https://github.com/Freescale/meta-freescale-distro.git
|
|
branch: scarthgap
|
|
path: layers/meta-freescale-distro
|
|
layers:
|
|
.:
|
|
|
|
# --- meta-openglow — Glowforge BSP layers ---------------------------------
|
|
# Referenced as a local sibling checkout (no url => kas performs no git ops,
|
|
# so in-place BSP edits are what gets built). The kernel-module-glowforge
|
|
# sources are NOT a layer; the kernel-module-glowforge.bb recipe fetches them
|
|
# by pinned SRCREV, so kas does not manage them here.
|
|
meta-openglow:
|
|
path: ../meta-openglow
|
|
layers:
|
|
meta-openglow-core:
|
|
meta-glowforge-bsp:
|
|
#
|
|
# Pinned-remote alternative for a fully self-contained clone (see
|
|
# kas/README.md "Push & release order"):
|
|
# meta-openglow:
|
|
# url: https://github.com/ScottW514/meta-openglow.git
|
|
# branch: scarthgap # pin via kas lock / a tag at release
|
|
# path: layers/meta-openglow
|
|
# layers:
|
|
# meta-openglow-core:
|
|
# meta-glowforge-bsp:
|
|
|
|
# ----------------------------------------------------------------------------
|
|
# local.conf additions
|
|
# ----------------------------------------------------------------------------
|
|
local_conf_header:
|
|
# Accept the NXP/Freescale firmware EULA — required to unpack firmware-imx
|
|
# (i.MX SDMA/VPU firmware blobs) pulled in by the i.MX6 BSP. ForgeFIRM targets
|
|
# the factory i.MX6 Glowforge board, so this firmware is intrinsic to the image.
|
|
eula: |
|
|
ACCEPT_FSL_EULA = "1"
|
|
|
|
# The kernel defaults to linux-fslc 6.12 in conf/machine/glowforge.conf
|
|
# (with the factory drivers forward-ported — EPIT/SDMA/OV5648/glowforge.ko —
|
|
# see kas/README.md backlog #2). This explicit pin is redundant but harmless.
|
|
kernel: |
|
|
PREFERRED_PROVIDER_virtual/kernel = "linux-fslc"
|
|
PREFERRED_VERSION_linux-fslc = "6.12%"
|
|
|
|
# NOTE: debug-tweaks (passwordless root) is deliberately NOT set here. It
|
|
# would apply to every target built from this config, including the release
|
|
# forgefirm-image. It lives in forgefirm-image-dev.bb's IMAGE_FEATURES so a
|
|
# single build yields a hardened release image and a debug dev image.
|
|
# release.sh gates the release rootfs against a passwordless root entry.
|
|
|
|
build-tweaks: |
|
|
# Parallelism sized for a 12-core / 16 GB build VM; raise on larger hosts.
|
|
BB_NUMBER_THREADS = "8"
|
|
PARALLEL_MAKE = "-j 8"
|
|
# Caches kept inside the forgefirm repo (gitignored):
|
|
DL_DIR ?= "${TOPDIR}/../downloads"
|
|
SSTATE_DIR ?= "${TOPDIR}/../sstate-cache"
|