forgefirm/kas

Building ForgeFIRM with kas

The forgefirm repo is the base of the project: it controls the build, the resulting firmware images land here, and all build/install docs live here. It uses kas to manage Yocto layers and drive the build, replacing the old Google repo + default.xml manifest and the hand-maintained base/conf/forgefirm-bblayers.conf.

Baseline

Yocto release	Scarthgap 5.0 LTS
Kernel	linux-fslc 6.12 (mainline LTS, from meta-freescale)
Machine	glowforge (i.MX6 Solo SOM — Basic/Plus/Pro)
Distro	forgefirm
Image	forgefirm-image

Layout

openglow-forgefirm/
├── forgefirm/                 ← THIS repo, the base
│   ├── kas/
│   │   ├── forgefirm-glowforge.yml   ← build entry point
│   │   └── README.md                 ← this file
│   ├── meta-forgefirm/        ← the forgefirm layer (this repo)
│   ├── BUILD.md / INSTALL.md / SERIAL.md
│   ├── layers/                ← kas-cloned upstreams (gitignored)
│   ├── build/                 ← bitbake output incl. images (gitignored)
│   ├── downloads/ sstate-cache/       ← caches (gitignored)
│   └── .gitignore
├── meta-openglow/             ← Glowforge BSP layers (local sibling, under migration)
└── kernel-module-glowforge/   ← glowforge.ko sources (pulled by recipe SRC_URI)

meta-openglow is referenced as a local sibling (../meta-openglow) while we migrate it to Scarthgap, so its in-place edits are what gets built. Once that migration is committed/pushed, flip it to a kas-cloned + pinned repo (commented block in forgefirm-glowforge.yml) and the forgefirm repo becomes fully self-contained.

Prerequisites

A Linux build host, or WSL2 on Windows (officially supported by Yocto).

WSL2 note: keep this whole tree on the WSL2 native ext4 filesystem (e.g. ~/dev/openglow-forgefirm), not under /mnt/c/.... The Windows mount breaks case-sensitivity/permissions and is very slow for Yocto. Give the WSL2 VM plenty of RAM and disk in .wslconfig.

pipx install kas      # or: pip install kas

Build

Run from the forgefirm repo root so outputs land inside it:

cd forgefirm
kas build  kas/forgefirm-glowforge.yml     # fetch layers + full build
kas shell  kas/forgefirm-glowforge.yml     # interactive bitbake environment
kas dump   kas/forgefirm-glowforge.yml     # print the resolved config

The bootable image lands in build/tmp/deploy/images/glowforge/. Flashing / dual-boot install steps are in ../INSTALL.md.

Container build (optional, reproducible host)

cd forgefirm
kas-container build kas/forgefirm-glowforge.yml

Pinning exact versions (reproducible builds)

The config tracks the scarthgap branch of each upstream layer. To lock every layer to an exact commit:

kas lock kas/forgefirm-glowforge.yml      # writes kas/forgefirm-glowforge.lock.yml

kas auto-loads the lockfile on subsequent runs. Commit it; refresh deliberately.

Scarthgap migration backlog

The kas scaffold + LAYERSERIES_COMPAT bumps let the layers be selected under Scarthgap, but the legacy (Dunfell/Gatesgarth) layers won't build clean until:

1. Override-syntax migration — DONE. All _append/_prepend/ _remove/_${PN} override syntax converted to the colon form across meta-forgefirm, meta-openglow-core, and meta-glowforge-bsp (22 occurrences). Note: meta-openglow-bsp (the separate OpenGlow_std board, not built here) was intentionally left unconverted.
2. Kernel forward-port (4.14 → linux-fslc 6.12.20) — the factory NXP vendor kernel (linux-imx 4.14.98) carried 7 out-of-tree changes; these are re-derived against mainline 6.12 in meta-glowforge-bsp/recipes-kernel/linux/linux-fslc_%.bbappend (the forward-port landing zone), not re-applied as the old 4.14 patches.
   • Foundation — DONE. linux-fslc 6.12.20 builds for glowforge with a ported device tree (glowforge.dts + openglow_common.dtsi overlaid into arch/arm/boot/dts/nxp/imx/, registered via a Makefile patch) and deploys zImage + glowforge.dtb. Boot-core + mainline-bound peripherals only.
   • Free wins — DONE. bus-freq disable dropped (no mainline busfreq); st,lis2hh12 ×3 + national,lm75b + ti,wl1805 + gpio keys/leds bind to mainline drivers; reg-userspace-consumer enabled via glowforge.cfg. (SPI-delay / PWM-prescaler dispositions are under Motion polish below.)
   • Motion path — DONE (builds clean; runtime needs hardware). The whole chain forward-ports and compiles on 6.12:
     • EPIT API: epit_api.c in arch/arm/mach-imx (CONFIG_MXC_EPIT_API), in vmlinux, symbols exported; &epit1/&epit2 in the DT.
     • SDMA-expose: re-created dma-imx-sdma.h + 0003-imx-sdma-*.patch (un-static survivors, re-added the glowforge helpers, custom int-callback hook); expose symbols in Module.symvers.
     • glowforge.ko: ported across many 6.12 API changes (tasklet_hrtimer→soft hrtimer, timer_setup, LED-trigger API, pwm_get, spi_delay/controller, filelock.h, void .remove, 1-arg i2c probe). Compiles + links, 0 undefined symbols. Built from the local sibling via an externalsrc bbappend during migration.
     • DT: glowforge,cnc/thermal/pic/head re-added with pwms/pwm-names phandles; glowforge.dtb compiles with all motion nodes. Motion polish: PWM prescaler (factory 1001) is obsolete — 6.12 pwm-imx27 auto-computes the prescaler from the requested period. The PIC inter-word SPI delay (factory 1005) is a hardware-bring-up TODO: 6.12 spi-imx.c has no PERIODREG/word_delay programming, so re-derive it in spi_imx_setupxfer (write MX51_ECSPI_PERIODREG from t->word_delay, guarded to ECSPI) and verify the wait-states on a scope. pic.c keeps the inter-transfer delay meanwhile. glowforge,imx-pwm-audio (buzzer) deferred.
   • Camera — DONE (builds clean; runtime needs hardware). The factory ov5648_mipi.c (NXP's removed v4l2_int_device/mxc_v4l2_capture) is replaced by the mainline ovti,ov5648 subdev + imx6 imx-media (IPU CSI)
     • imx6-mipi-csi2 receiver. The factory CAM_SEL MIPI switch is modelled with the mainline video-mux (gpio-mux on gpio7 10): both ov5648s → video-mux → mipi_csi → IPU CSI. Sensor xvclk (25 MHz fixed-clock) + avdd/dovdd/dvdd rails in the DT. All drivers build as modules and glowforge.dtb compiles with the full pipeline. HW bring-up: confirm the real supply rails, CSI-2 lane count/order and CAM_SEL polarity, then validate with media-ctl + a v4l2 capture.
3. u-boot — rebuild for Scarthgap DONE. The glowforge u-boot is now a standalone u-boot_2020.01.bb (Scarthgap dropped the Dunfell-era poky base recipe the old .bbappend extended). It reuses poky's u-boot-common.inc/u-boot.inc, pins SRCREV to the upstream v2020.01 tag with the matching Licenses/README md5, and overlays the glowforge board support + arch-Kconfig patch. Builds clean under Scarthgap (GCC 13, no source fixes) and deploys u-boot-glowforge.imx. Remaining: move fw_printenv/fw_setenv from u-boot-fw-utils to libubootenv (PREFERRED_PROVIDER_u-boot-fw-utils in glowforge.inc) when the rootfs needs them.
4. Device tree — revalidate the glowforge .dts against the linux-fslc 6.12 DT bindings (paired with the kernel forward-port in #2).
5. gfui-client → forgectrl — the Glowforge cloud client is now removed from forgefirm-image (IMAGE_INSTALL:remove = "gfui-client" in meta-forgefirm/recipes-forgefirm/images/forgefirm-image.bb) — it connected to Glowforge's servers, the dependency ForgeFIRM exists to cut. The grblHAL controller + web UI (forgectrl, currently a placeholder) will fill its place.

---

Image status: forgefirm-image builds end-to-end on the forward-ported stack and deploys forgefirm-image-glowforge.rootfs.wic.gz (+ zImage, glowforge.dtb, u-boot-glowforge.imx) under build/tmp/deploy/images/glowforge/. Build-time prerequisites baked into the config: ACCEPT_FSL_EULA = "1" (NXP firmware-imx) and the kernel default in glowforge.conf. Everything compiles; on-hardware bring-up (motion timing, laser/safety chain, camera pipeline) is the remaining validation and needs a real board.