mirror of
https://github.com/openglow-org/forgefirm.git
synced 2026-09-27 08:41:13 -07:00
ScottW514
88ec984e28
BRINGUP describes the present: the 54-test catalog and its seven-test always core, the tier counts, the shipped low-temperature gates, the density floor ($35 = 10), the two local core commits, the ffboot env write, the aa-offset route, the current bench image, and the bench measurements the audit asks for (pooled into the next session). The workstation shell notes and every em dash are gone. forgetest: the takeover waits for the cloud client too (found by its command line); the unauthenticated /boot probe names the endpoint's parameter; the UI prose is American English. Recipes: forgetest fetches its package directory and init script only and drops __pycache__ at unpack; the dev image no longer re-adds forgectrl; the release image's remove list drops the gfui-client the BSP no longer has; the platform identity strips the kernel's local-version hash from the modules directory name, so a re-patched kernel keeps its fingerprints. grblhal restart is stop then start. release.sh --dev packs the dev image. fixture.sh refuses a readable env file. Bench tools: the live-fire drills measure the lid-IR baseline before every run and point at the fire-watch thresholds the engine reads; one thermistor conversion (gfbench.degc) serves every drill; the six dated measurement records leave the tool directory; feeder.c names the two sysfs writes its caller makes. Host tests: forgetest 258 pass; the coverage lint reports no uncovered path across 54 tests. Acceptance: forgectrl.auth covers the /boot probe; update.* cover ffboot and the manifest identity; the runbook and bench-tool changes have no catalog consequence.
127 lines
4.8 KiB
YAML
127 lines
4.8 KiB
YAML
# ============================================================================
|
|
# ForgeFIRM - kas build configuration (factory Glowforge control board)
|
|
# ============================================================================
|
|
# The forgefirm repo is the BASE: it controls the build, the output firmware
|
|
# images land here (build/tmp/deploy/images/glowforge/), and the status docs
|
|
# live here (docs/BRINGUP.md, docs/CAMPAIGN-LOG.md). The install, build and
|
|
# release procedures are on the documentation site: https://docs.forgefirm.org/
|
|
#
|
|
# Target : Yocto Scarthgap (5.0 LTS) + linux-fslc 6.12 (mainline LTS)
|
|
# Machine: glowforge (i.MX6 Solo SOM inside Basic/Plus/Pro)
|
|
# Distro : forgefirm
|
|
#
|
|
# kas generates bblayers.conf and local.conf.
|
|
#
|
|
# Run from the forgefirm repo root so outputs land inside it:
|
|
# cd forgefirm
|
|
# kas build kas/forgefirm-glowforge.yml # fetch layers + full build
|
|
# kas shell kas/forgefirm-glowforge.yml # interactive bitbake env
|
|
# kas dump kas/forgefirm-glowforge.yml # show resolved config
|
|
#
|
|
# Reproducible pins (after first checkout):
|
|
# kas lock kas/forgefirm-glowforge.yml # writes kas/forgefirm-glowforge.lock.yml
|
|
# ============================================================================
|
|
|
|
header:
|
|
version: 14
|
|
|
|
machine: glowforge
|
|
distro: forgefirm
|
|
target: forgefirm-image
|
|
|
|
# kas uses KAS_WORK_DIR (the dir you run kas from = the forgefirm repo root).
|
|
# Upstream layers are cloned into ./layers/, the build runs in ./build/, and
|
|
# caches go in ./downloads + ./sstate-cache - all gitignored, all inside forgefirm.
|
|
repos:
|
|
|
|
# --- This repo (forgefirm) - auto-detected, no url/path needed -------------
|
|
forgefirm:
|
|
layers:
|
|
meta-forgefirm:
|
|
|
|
# --- Upstream layers (cloned + pinned to the scarthgap branch by kas) ------
|
|
|
|
poky:
|
|
url: https://git.yoctoproject.org/poky.git
|
|
branch: scarthgap
|
|
path: layers/poky
|
|
layers:
|
|
meta:
|
|
meta-poky:
|
|
|
|
meta-openembedded:
|
|
url: https://github.com/openembedded/meta-openembedded.git
|
|
branch: scarthgap
|
|
path: layers/meta-openembedded
|
|
layers:
|
|
meta-oe:
|
|
meta-python:
|
|
meta-networking:
|
|
|
|
meta-freescale:
|
|
url: https://github.com/Freescale/meta-freescale.git
|
|
branch: scarthgap
|
|
path: layers/meta-freescale
|
|
layers:
|
|
.:
|
|
|
|
meta-freescale-distro:
|
|
# Provides conf/distro/include/fslc-base.inc, required by the forgefirm distro.
|
|
url: https://github.com/Freescale/meta-freescale-distro.git
|
|
branch: scarthgap
|
|
path: layers/meta-freescale-distro
|
|
layers:
|
|
.:
|
|
|
|
# --- meta-openglow - Glowforge BSP layers ---------------------------------
|
|
# Referenced as a local sibling checkout (no url => kas performs no git ops,
|
|
# so in-place BSP edits are what gets built). The kernel-module-glowforge
|
|
# sources are NOT a layer; the kernel-module-glowforge.bb recipe fetches them
|
|
# by pinned SRCREV, so kas does not manage them here.
|
|
meta-openglow:
|
|
path: ../meta-openglow
|
|
layers:
|
|
meta-openglow-core:
|
|
meta-glowforge-bsp:
|
|
#
|
|
# Pinned-remote alternative for a fully self-contained clone (see the site,
|
|
# Developers, "Release flow"):
|
|
# meta-openglow:
|
|
# url: https://github.com/openglow-org/meta-openglow.git
|
|
# branch: scarthgap # pin via kas lock / a tag at release
|
|
# path: layers/meta-openglow
|
|
# layers:
|
|
# meta-openglow-core:
|
|
# meta-glowforge-bsp:
|
|
|
|
# ----------------------------------------------------------------------------
|
|
# local.conf additions
|
|
# ----------------------------------------------------------------------------
|
|
local_conf_header:
|
|
# Accept the NXP/Freescale firmware EULA - required to unpack firmware-imx
|
|
# (i.MX SDMA/VPU firmware blobs) pulled in by the i.MX6 BSP. ForgeFIRM targets
|
|
# the factory i.MX6 Glowforge board, so this firmware is intrinsic to the image.
|
|
eula: |
|
|
ACCEPT_FSL_EULA = "1"
|
|
|
|
# The kernel defaults to linux-fslc 6.12 in conf/machine/glowforge.conf
|
|
# (with the factory drivers forward-ported - EPIT/SDMA/OV5648/glowforge.ko -
|
|
# see the site, Developers, "Build"). This explicit pin is redundant but harmless.
|
|
kernel: |
|
|
PREFERRED_PROVIDER_virtual/kernel = "linux-fslc"
|
|
PREFERRED_VERSION_linux-fslc = "6.12%"
|
|
|
|
# NOTE: debug-tweaks (passwordless root) is deliberately NOT set here. It
|
|
# would apply to every target built from this config, including the release
|
|
# forgefirm-image. It lives in forgefirm-image-dev.bb's IMAGE_FEATURES so a
|
|
# single build yields a hardened release image and a debug dev image.
|
|
# release.sh gates the release rootfs against a passwordless root entry.
|
|
|
|
build-tweaks: |
|
|
# Parallelism sized for a 12-core / 16 GB build VM; raise on larger hosts.
|
|
BB_NUMBER_THREADS = "8"
|
|
PARALLEL_MAKE = "-j 8"
|
|
# Caches kept inside the forgefirm repo (gitignored):
|
|
DL_DIR ?= "${TOPDIR}/../downloads"
|
|
SSTATE_DIR ?= "${TOPDIR}/../sstate-cache"
|