mirror of
https://github.com/openglow-org/forgefirm.git
synced 2026-09-27 16:51:12 -07:00
ScottW514
64a720bbab
Bump the grblHAL pin to the producer lead and margin instrumentation. Rewrite BRINGUP item 16 to the present state. The scheduling half is done - the producer runs SCHED_FIFO below the shipper, core_mx carries priority inheritance, and clamping is reported per run - and two bench runs 90 s apart on one image show what that does and does not cover: a nice-5 CPU hog passes clean while the camera streaming clamps 7 runs, because per-frame cache maintenance over a 4.8 MB non-coherent capture buffer is kernel-context work no userspace priority can preempt. Record the margin finding, since it explains why a 4 ms stall was enough: the queue depth cancels between the shipper's due index and the producer's base, so the pacing lead is the only slack. Record the cycle-churn ceiling that caps that lead at 10 ms, and that the re-base fix is what unlocks more. Camera gating stays owed, with capture resolution named as the lever that shortens the stall rather than merely spacing stalls out.
7 lines
353 B
PHP
7 lines
353 B
PHP
# grblHAL-glowforge pin. Bump deliberately after pushing grblHAL-glowforge
|
|
# changes; keep only SRCREV and PV here - the image manifest leaves
|
|
# *-pin.inc out of the layer content hash because the component entry
|
|
# already identifies the pinned source (forgefirm-image-manifest.bbclass).
|
|
SRCREV = "fd059b3bf52de103f598cf94cb860916e5fffd00"
|
|
PV = "0.1.0"
|