mirror of
https://github.com/openglow-org/forgefirm.git
synced 2026-09-27 08:41:13 -07:00
ScottW514
cd8a01a3d9
The remaining bench diagnostics run from forgetest's #bench tab. The tools that also run from a LAN host share scripts/bench/gfbench.py: GF_HOST names a remote machine (host mode, sysfs through ssh, Grbl and forgectrl over the LAN); unset, the tool runs on the board itself (local mode, sysfs directly, everything on 127.0.0.1), which is how the page runs them - with GF_HOST=127.0.0.1, the panel token in GF_TOKEN and their data files under <data>/bench/ (FORGETEST_BENCH_DATA). The helper also reads a machine setting from forgectrl, or from the settings file on the board while forgectrl is stopped. Ported: pwm_sweep / pwm_hold (scope = a takeover; the latch relocked, the write refused if FIRE or LASER_ON reads active), pwm_stream_test (PASS/FAIL exit), flow_characterize, flow_recheck_char, flow_warm_validate and flow_matrix (takeovers: forgectrl owns the thermal hardware, so the page's takeover replaces the tools' own controller stop/restart, whose command line predated the supervisor; results and logs in the bench data directory), flow_sustained, fan_test, temp_calibrate (dry; watch bounded in seconds; the threshold and the coolant conversion from the shared code), flow_escalate_drill (cool_confirm_max_s shortened through forgectrl's settings for the drill and restored; the setting's minimum is the default budget), and live_fire_drills (<drill> [S] [F], all six drills, host from GF_HOST, token from the board). flow_matrix joins the registry. What stays unported cannot run against the machine at all: the two null-sink CI harnesses and the .puls decoder. Runner: a scope tool runs inside the takeover wrapper; the bench environment above is passed to every tool. Tests: test_bench_registry (registry <-> scripts/bench consistency, every ported tool builds its command line, every script compiles, gfbench host/local modes) and the server test (scope tool takeover, the environment reaching the tool). Local mode smoke-run on the bench (temp_calibrate watch, setting, token) from /tmp, removed after. No catalog consequence: bench tools are not image components (dev-only forgetest); the acceptance catalog is unchanged.
53 lines
1.8 KiB
Python
53 lines
1.8 KiB
Python
#!/usr/bin/env python3
|
|
"""Hold LASER_PWM at one duty value for a measurement window, then restore.
|
|
Usage: pwm_hold.py [sar] [seconds] (defaults: 8, 30)
|
|
|
|
The duty register (PWMSAR) is the laser power SETPOINT only. Locked
|
|
state only: run with the controller and forgectrl stopped (the bench
|
|
page's takeover), the pulse device closed. The latch is relocked here
|
|
as well, and the hold refuses to write if the FIRE line reads driven or
|
|
LASER_ON reads active."""
|
|
import mmap, struct, sys, time
|
|
|
|
PWM2_BASE = 0x02084000
|
|
SAR_OFF = 0x0C
|
|
|
|
sar = int(sys.argv[1]) if len(sys.argv) > 1 else 8
|
|
secs = int(sys.argv[2]) if len(sys.argv) > 2 else 30
|
|
|
|
|
|
def rd(name):
|
|
with open('/sys/glowforge/' + name) as f:
|
|
return f.read().strip()
|
|
|
|
|
|
def wr(name, val):
|
|
with open('/sys/glowforge/' + name, 'w') as f:
|
|
f.write(str(val))
|
|
|
|
|
|
try:
|
|
wr('cnc/laser_latch', 1)
|
|
except OSError as e:
|
|
raise SystemExit('could not lock the laser latch: %s' % e)
|
|
time.sleep(0.2)
|
|
en, on = rd('cnc/laser_enable'), rd('cnc/laser_on')
|
|
if en != '0' or on != '0':
|
|
raise SystemExit('not the locked state: laser_enable=%s laser_on=%s' % (en, on))
|
|
|
|
with open('/dev/mem', 'r+b') as f:
|
|
m = mmap.mmap(f.fileno(), 4096, mmap.MAP_SHARED,
|
|
mmap.PROT_READ | mmap.PROT_WRITE, offset=PWM2_BASE)
|
|
sar0 = struct.unpack('<I', m[SAR_OFF:SAR_OFF + 4])[0]
|
|
m[SAR_OFF:SAR_OFF + 4] = struct.pack('<I', sar)
|
|
print('PWMSAR=%d held for %d s (was %d)...' % (sar, secs, sar0))
|
|
sys.stdout.flush()
|
|
try:
|
|
time.sleep(secs)
|
|
finally:
|
|
m[SAR_OFF:SAR_OFF + 4] = struct.pack('<I', sar0)
|
|
print('restored PWMSAR=%d' % sar0)
|
|
print('laser_enable=%s laser_on=%s laser_on_sampled=%s'
|
|
% (rd('cnc/laser_enable'), rd('cnc/laser_on'), rd('cnc/laser_on_sampled')))
|
|
m.close()
|