ScottW514
4fbf14195b
The airflow check reads the purge fan's off current with the fan off, and the stand-down that follows commands it back on. The guard that proves the machine was handed back whole read the draw immediately, so what it got back was the off current the check had just measured: on the bench reference, 74 against a 300 floor, with the fan drawing 631 a moment later. The check failed for having worked. The current follows the command; it does not arrive with it. The guard now waits for the draw to reach the floor, up to PURGE_SPINUP_S, the way the controller below it is already waited for, and logs how long it took. It is no weaker: a fan that never reaches its floor still fails the check, and the message now says how long it was given. Pin: forgectrl 0.1.17 (a9e7073, the air assist and the purge in the diagnostic run posture - the reason that check measured an idle fan and wrote a floor from it).
forgetest - the ForgeFIRM release acceptance tool
The daemon behind http://<machine>:8090/ on the dev image: runs the
acceptance catalog against the machine, keeps the append-only result log,
decides which results still apply to the image that is running, exports
the release artifact scripts/release.sh gates on, and serves the bench
diagnostics page. The contract - catalog, campaigns, fingerprints,
inheritance, the gate, the coverage rule - is
the Acceptance page of the documentation site.
Run the host tests
cd forgetest
python3 -m unittest discover -s tests -v
Run the daemon on a workstation (against a mock or a manifest file)
FORGETEST_DATA=/tmp/ft FORGETEST_MANIFEST=../tree-manifest.json \
FORGECTRL_URL=http://<machine> python3 -m forgetest --port 8090
scripts/manifest-from-tree.py produces tree-manifest.json from the recipe
pins; the coverage lint is python3 -m forgetest.coverage --manifest ....
Environment
| Variable | Default | Purpose |
|---|---|---|
FORGETEST_DATA |
/data/forgetest |
results.jsonl, bench.jsonl, token, export/ |
FORGETEST_MANIFEST |
/etc/forgefirm-manifest.json |
the image manifest |
FORGETEST_PORT, FORGETEST_HOST |
8090, 0.0.0.0 | listener |
FORGETEST_BENCH_DIR |
/usr/share/forgetest/bench |
the installed bench scripts |
FORGETEST_BENCH_DATA |
<FORGETEST_DATA>/bench |
passed to bench tools: where they keep their data files (with GF_HOST=127.0.0.1 and the panel token in GF_TOKEN) |
FORGETEST_MARKER |
/run/forgetest.active |
takeover marker |
FORGECTRL_URL, FORGECTRL_TOKEN_FILE |
http://127.0.0.1, /data/forgefirm/panel.token |
forgectrl client (HTTP; the token authorizes writes from the board) |
FORGECTRL_TLS_URL |
https://127.0.0.1 |
forgectrl over HTTPS (self-signed, unverified), for the login test |
GF_SYSFS_ROOT |
/sys/glowforge/ |
kernel module sysfs |
GRBL_HOST, GRBL_PORT |
127.0.0.1, 23 | Grbl TCP |
Adding a test
Register it in the subsystem module under forgetest/suite/ with
@test(...): id subsystem.name, kind, hardware, mode (the controller
mode the test needs; the runner switches to it first), covers,
requires, always, steps. The body gets a Context (log, check, fail,
prompt, confirm, instruct, sleep, evidence, forgectrl, sysfs,
grbl, takeover). Return normally for PASS, raise runner.Failed for
FAIL. Then run the unit tests and the coverage lint.