forgefirm/docs/BRINGUP.md

ForgeFIRM bring-up status & cold-start runbook

Last updated: 2026-08-15 — unified logging landed in every repo (code-complete, host-verified end to end, pushed, pins bumped): rsyslog is the system logger and the only log writer, every ForgeFIRM process emits through syslog under its own program name, each logger has its own directory under /data/log/forgefirm/, per-logger disk and remote levels plus a remote syslog target are machine settings (applied at reboot) with a Logs tab in the panel (levels, live viewer, sanitized tar.gz export for issue reports). It is an image change (rsyslog replaces busybox syslogd/klogd) and rides the next full image flash — bench validation checklist is "Next work" item 14. Before that: audit remediation Phases 0 through 11 landed: every one of the 159 findings from the independent whole-tree audit dated 2026-08-13 has its fix committed (the remediation was sequenced behind two gates — GATE A, uncommanded energy, before any further live-fire; GATE B, control surface + release, before any published release — and both are bench-closed, see the campaign record below). Image 20260814223300 (forgefirm-image + forgefirm-image-dev) carries every kernel/image row through Phase 9 and is flashed on the bench; built-image checks pass: the release rootfs has root locked (* in /etc/shadow), no watchdog daemon, forgefirm-logrotate installed, and K80grblhal/K80gfcloud ahead of K90forgectrl at runlevel 6; the kernel config carries CONFIG_IMX2_WDT, CONFIG_PANIC_ON_OOPS, and CONFIG_PREEMPT; the DTB fallback bootargs is console-only; glowforge.ko (the full hardening batch) is in /lib/modules. The Phase 11 sweep (below) is host-verified, pinned, and its controller and daemon halves are installed on the bench; its kernel half is doc/SPDX-only. Image 20260815105250 (forgefirm-image + forgefirm-image-dev) is built on the Phase 11 pins — the first image whose license manifest declares python3-gfhardware as MIT & LGPL-2.1-or-later and wlconf as GPL-2.0-only (packaged output) — with the same built-image checks passing (root locked, no watchdog daemon, K80/K90 order, glowforge.ko and both controller binaries present) and the buildpaths QA warning gone (the shipped grblHAL --version flags string carries no host paths). Its only build warning is a stamp-taint note from an earlier forced do_compile. Flashed on the bench by the operator 2026-08-15 — the board now runs the pinned Phase 11 userspace from the image rather than hot-installed binaries. With that, the audit's working files (the findings list, the remediation plan) are retired: every finding is fixed, every deliberate leftover lives in "Next work" below, and this runbook is the record.

Bench campaign — opened 2026-08-14; image 20260814223300 flashed and booted. Post-flash health check passes on the board: it reports 20260814223300 (dev); kernel 6.12.20-fslc with CONFIG_PREEMPT and the console-only panic=10 command line; CONFIG_IMX2_WDT and CONFIG_PANIC_ON_OOPS present in the running config; the hardened glowforge.ko loaded with the 16 MiB cnc-pulsebuf no-map pool mapped and SDMA channel 26 / EPIT up; forgectrl holds /dev/glowforge (40 V up, dead-man active) and supervises the grbl controller with the motion-liveness probe reading verified; the latch reads locked and faults 0 at idle; the only watchdogd is the kernel kthread (no userspace watchdog daemon). GATE B is bench-verified on the software/control-surface side. From a second LAN host every state-changing endpoint refuses an unauthenticated write (403 authentication required); a spoofed non-literal Host, a non-literal Origin, and a cross-site Sec-Fetch-Site are each refused (403 request origin refused); /cool/state refuses a non-loopback peer (403 loopback only); the four-POST unsigned-flash chain (upload → apply?confirm_unsigned=1 → boot → reboot) and restore/factory are each refused unauthenticated; /fuse-identity is fully token-gated (F-1, F-2, F-19). The authenticated max-length POST /settings probe passes without a crash: a 300-character value is refused 400, thirteen 16-character in-range values are accepted 200, and /status, the panel /, and /settings all keep serving, with the settings restore verified byte-identical to the pre-test snapshot (F-4, F-18). On-board build facts re-confirmed on the running image: controllers stop at K80 before forgectrl at K90 (rc0/rc6, B-4); the forgefirm logrotate config and init lever are installed (F-16); there is no /etc/watchdog.conf or watchdog init (B-8); the wlconf data files are 0644 (B-16); the panel token is stored 0600 (the settings file's 0600 creation is Phase 11's F-23, host-verified there). GATE A dry motion drills pass (latch locked, no emission, operator watching): bounded relative jogs move the gantry (operator-witnessed) and the grblHAL position counter tracks the commanded moves exactly, returning to rest; a jog-cancel (0x85) stops the jog cleanly short of target and returns to Idle with position preserved; a feed-hold (!) parks with the feed ramping to 0 (Hold:1→Hold:0) and a resume (~) completes the move with no lost-step alarm; a ^X abort decelerates under control into Alarm with machine position retained, $X recovers to Idle, and a subsequent jog runs — no DRV8825 wedge after the abort (the rail never cycled). Dry dead-man / disruption drills pass (latch locked, no emission): with only the broker and the controller holding /dev/glowforge — no stray process pins it (F-6) — a SIGKILL of the controller mid-move is reaped by the supervisor, which writes cnc/stop

• cnc/laser_latch=1, unlinks the homing anchor, and respawns a fresh controller in about a second with the latch never unlocking (F-3); a SIGSTOP (hang) mid-move drains the ring into a kernel pulse data underrun; position no longer trusted, halting motion fast with the latch locked while the cooling engine's report-silence clock runs past its window; and a forgectrl restart mid-move leaves the busy controller running (reparented), lets the move finish uninterrupted, never unlinks the cooling verdict, and has the new daemon stand by and retake at idle (F-12). The liveness probe's designed skip-on-open path — the safety-chain output is known to de-assert during motion, so an at-that-moment read can skip the probe, proceed without a motion fault, and re-probe on the next spawn — was exercised and behaved per liveness.c. GATE A kernel drills PASS on this image (operator present, HV unpowered, software witnesses — the bit-to-pin correspondence was scope-pinned 2026-08-02): run with forgectrl stopped so the pulse device is free (scripts/bench/gate_a_kernel_drills.py). K1: a controlled stop from the 10 kHz cloud tick decelerates in 0.091 s (theoretical ramp 0.072 s) to idle with no max-rate burst and no fault. K2: with the latch locked, a stop + resume +200 replays a 2 s FIRE window with laser_enable/laser_on at 0 throughout and interlock pinned at 13 — the waypoint provably completed (the position counter advanced all 1000 masked steps; motor_lock masks the output drive, not the counters). K3: laser_latch=0 written inside the accel ramp drives the latch pin (interlock 13→5, bit 3 clear) but the FIRE output drive is never restored while the run is in flight — laser_enable 0 for the entire 3.5 s FIRE-bit stream. fire_test.py A/B/U reproduce the 2026-08-02 reference on the rebuilt kernel: A (latch locked) pins interlock at 13 through 40,000 FIRE bits; B (latch unlocked, chain unarmed) shows laser_enable=1/interlock 7 mid-window with laser_on/laser_on_sampled 0 — the safety AND-gate holds; U reaches a true underrun, the backstop drops FIRE, and stop acks it. GATE A IS CLOSED: every Phase 1 row is fixed, the G-1 assertion is green in CI, and the drills above are the bench log. Live fire is permitted again. The masked K2 steps leave the un-anchored X counter offset (+1000 steps); homed:false already enforces the re-home.

The campaign caught a live defect (fixed same day): the liveness probe's enclosure guard read the combined-doors EV_SW bit with the sense inverted (bit 3 set means closed, as the controller's switch map decodes; the guard treated set as open), so the probe skipped on every spawn with the lid closed — and would have moved the gantry with it open. Verified live against EVIOCGSW (lid closed, bit 3 = 1, probe reporting "door/interlock open"). Fixed in forgectrl 424f185 and hot-deployed; on the next start the probe genuinely ran and the supervision behaved exactly as designed: a first gray-zone read (head accel p2p x=455, below the ≥500 moving threshold) was treated as NO MOTION and re-probed rather than false-passed, and the second probe returned MOTION OK (p2p x=3919, y=1636) — the DRV8825s are not wedged after the drill session's rail cycles.

X-2 connection-flood robustness exercised (dry): a 500-connection slow-drip flood from a second LAN host drove forgectrl from 7 to a peak of 379 open fds, where it plateaued — MHD's own connection handling caps concurrency far below the raised 4096 RLIMIT_NOFILE, so the flood could not manufacture the EMFILE that the X-2 fix guards against. The daemon never crashed, the kernel cnc/state stayed readable throughout (two local /status probes timed out at the peak and recovered within a second), and it returned to 7 fds with /status 200 after the flood drained. The fail-closed branch itself (machine_is_idle() returns busy on any rd_attr failure) is now covered by a host unit test in forgectrl CI (tests/status_idle_test.c, X-2): it points the sysfs reader at a temp tree via a GF_SYSFS_ROOT seam and asserts not-idle on a missing state file and under real fd exhaustion (EMFILE) — the connection-flood trigger the runtime flood cannot reach while MHD caps connections below the fd limit. Test-the-test verified: a fail-open revert fails it. Note for F-15/X-6: the absence of an explicit MHD_OPTION_CONNECTION_LIMIT + per-IP cap is still the deferred half; the default ceiling held here but a per-IP cap remains the right hardening.

Idle-CPU diagnosis + pacing fix (2026-08-14). The controller was found at ~28% CPU while the machine appeared idle. Traced to grblHAL being parked in the safety-door state (Door:0) — entered when the lid was opened for inspection between drills, and held there awaiting a cycle-start even after the lid closed. In any state other than STATE_IDLE/STATE_ALARM the driver's serial_wait took the 200 µs segment-production pace, so a parked Door (or Hold) busy-spun the protocol thread. Not a regression in the audit work; the parked-state pacing had always been tight. Fixed in grblHAL b2cad8d (motion_parked()): a completed feed hold, a parked door (ajar or closed), and sleep now take the coarse idle poll, while the motion sub-phases (Hold_Pending decel, Parking_Retracting/Resuming) keep the tight pace. Hot-deployed; pin bumped and fetch-verified. Bench-validated dry (scripts/bench/pacing_test.py): idle 2.7%, active move 35% (tight, segments flowing), parked Hold:0 2.7% (was ~28%), parked Door:1/Door:0 3.0% (was ~28%), and a mid-move feed-hold→resume preserved position exactly (30.000 mm, no lost steps — the feeder never starved through the decel and resume ramps). This pin bump also rides P10's grblHAL CI/tests and the mlockall-root-only change into the next image.

Live-fire drills PASS (operator armed, S400/40% vector marks on scrap, scripts/bench/live_fire_drills.py):

• Phase 5 A-1 emission witness — PASS. On a commanded fire window cnc/laser_on_sampled (surfaced as /status laser.emission_samples) goes to its full 255 count and returns to 0 at Idle, across two separate burns. This is the reliable live-emission witness.
• Phase 5 A-5 HV telemetry — PASS. pic/hv_current (hv_current_raw) tracks the cut: 0 at idle, 0→1023/661/482 raw during the three burns (the tube draws real current). The only HV witness on this PSU — hv_voltage is grounded, as the audit noted.
• Phase 5 A-2 lid IR — characterized, gate left watch-only. A 40 % vector cut lifts the four pic/lid_ir channels only ~+3 counts over the ambient baseline (37/36/40/40 → peaks ~40/39/42/43) — barely above the ±3-count ambient noise, i.e. a weak fire signal at this power. cool_fire_ir_delta therefore stays 0 (watch-only) until a representative high-power job is characterized; a real ignition flare is far brighter than a cut, so the eventual threshold sits well above both the cut delta and the noise (a floor near 15 counts is the working target, not yet committed). forgectrl's per-job telemetry line logs baseline/peak for all four channels.
• pgood is not a usable witness on this PSU. cnc/laser_pgood_sampled stayed 0 (forgectrl reads <128 as "not good") through every burn even while hv_current rail'd and the tube cut — so A-1's "surface laser_pgood loss" warning is a false alarm on this hardware and must be gated/suppressed here (or documented as expected); the emission and HV witnesses are the trustworthy ones. Recorded for the A-1 follow-up.
• Phase 4 X-3 job-based disarm — PASS. A job ending in M2 (program end, as LightBurn sends) disarms in 0.1 s at Idle; a job with no program end falls back to the ~60 s laser_disarm_s idle grace (measured 56.8 s). The window is job-based, not 60-s-idle-based.
• Phase 4 G-10 disarm-in-Hold — PASS. Armed, fired a +X move, feed-held mid-move (Hold:1); the disarm grace counts down while held and closes the window at 61.3 s (the bug left a job abandoned in Hold armed for hours).

Live defect caught and fixed by the campaign: the liveness probe's enclosure guard read the combined-doors EV_SW bit with inverted sense (bit 3 set = closed, per the switch map; the guard treated set as open), so the wedge probe skipped on every spawn with the lid closed and would have moved the gantry with it open. Fixed in forgectrl 424f185, hot-deployed; the probe then ran for real and behaved as designed — a gray-zone first read (head-accel p2p x=455, below the ≥500 threshold) was retried rather than false-passed, and the retry returned MOTION OK (p2p x=3919, y=1636). The forgectrl pin is bumped to 424f185 (fetch-verified) so the fix also rides the next image, not only the hot-deploy.

Closed by host unit test instead of a bench drill: G-4 (the arm must re-check gfcool_fire_ok() after the button wait — the verdict can go bad during a wait that runs for minutes) now has a grblHAL CI test (tests/laser_arm_test.c) that includes the driver source, stubs the core, and drives the real gflaser_arm() with a good-then-bad verdict sequence, asserting the arm refuses at the post-wait re-check (latch locked, window never opened, alarm raised). Test-the-test verified: removing the re-check fails it. This is cleaner than the bench drill, which needed the pump killed in the instant after the press. Still config-dependent, left as-is: Phase 6's "armed job refuses at the stale origin after an underrun" (GRBL mode permits unhomed cutting), and the core underrun behavior — pulse data underrun; position no longer trusted with the homing anchor unlinked — is already logged in the dry dead-man drills above. Live fire only with the operator armed: eye protection, fire watch, exhaust running.

The lid-IR ambient baseline for the fire-watch characterization is captured on this image (600 samples over 5.6 min at 2 Hz, lid closed, machine idle, coolant ≈25 °C): lid_ir_1..4 read 37.3 ±0.6, 36.3 ±0.6, 39.5 ±0.7, and 40.0 ±0.6 raw counts (total spread ±3 counts), hv_current reads 0 throughout, and the emission witness (laser_on_sampled) read 0 on all 600 samples — the idle plumbing for the emission/fire/HV evidence is verified quiet end to end (/status carries the sensed rows; /cool/status reports fire_watch:"watch"). Dataset: scripts/bench/lid_ir_ambient_baseline.csv. When the fire characterization sets cool_fire_ir_delta, it must land comfortably above the worst normal-cut peak delta and never below ~15 counts, so ambient noise can never trip the fire abort. The three pending GATE A kernel drills are scripted and staged on the bench (scripts/bench/gate_a_kernel_drills.py): K1 proves the controlled-stop deceleration floor at the default cloud tick, K2 proves a resume waypoint honors the locked latch through a replayed FIRE window, and K3 proves a mid-ramp latch unlock never re-arms the FIRE drive — each with software witnesses (laser_enable, laser_on, laser_on_sampled, interlock bit 3) plus the PSU-connector LASER_ON scope point, run with forgectrl stopped so the pulse device is free.

Bench session 2026-08-15 (image 20260815105250, operator present) — two live-fire findings closed, one real defect found and fixed. Lid-IR characterization at cutting power: three 30 mm squares on scrap (S1000 F300, S1000 F150, S800 F600); the engine's per-job telemetry read run-start baseline → peak 58/59/64/63 → 62/60/66/66, 56/56/61/62 → 60/61/66/68, 56/55/61/63 → 61/60/65/66 — a worst normal-cut rise of +6 counts on any channel, against ±3 counts of ambient noise. Ambient that day read ~57–64 vs 37–40 on 08-14 (day-to-day drift ≈ +22 counts), which is why the gate keys off the run-start baseline and never off an absolute level. cool_fire_ir_delta = 15 is the sized gate (≥ 2× the worst cut rise, at the ~15-count floor); it is a hand-edited /data/forgefirm.conf key, set on the bench 2026-08-15 (verified present, file 0600), and takes effect at the next run start — the fire watch is armed from here on and the next real jobs are the false-trip watch. Flame signature, measured the same day (machine idle): a small candle burning on the bed under the closed lid read 38–41 / 38–41 / 42–45 / 42–45 against a lid-open level of 36 / 35 / 38 / 39 and a lid-closed-empty control of 34–37 / 34–36 / 36–39 / 37–40 — closing the lid changes nothing, the candle is +3 to +6 counts on all four channels for as long as it burns. That is the same size as a full-power cut's rise, so a threshold cannot separate a candle-sized flame from cutting and the 15-count gate will not react to a flame that small; what a material fire of a size worth stopping for produces is unmeasured. Then the decisive measurement, dry, the same day: the lid-IR channels track the lid LED. lid_led 0 → 2 2 1 2, 8 → 2 2 3 2, 131 (the resting level) → 54 55 61 62, 255 → 172 171 190 188. The sensors are, first of all, a photometer for the lid lamp; every rise measured above (cuts +4–6, candle +3–6, the "+22 drift" between sessions) is a small modulation on a lamp-set level. forgectrl's camera engine drives pic/lid_led for every lid capture (132 during the grab, previous level restored), and the resting level is not fixed (131 here, 8 after one reboot, cloud mode sets its own LLvl) — so a snapshot mid-run can step every channel by tens of counts and a fixed-count gate fires a phantom FIRE stop. cool_fire_ir_delta was therefore set back to 0 (watch-only) the same day; the gate stays disabled until the fire watch is lamp-aware (Next work item 10). Armed kill on the expected-stop path — first run FAILED, defect fixed, re-run PASS. With emission live, POST /controller/stop returned only after 5.30 s and the operator saw ~17 mm / ~5 s of continued cutting before a decelerated stop: the supervisor's SIGTERM was honored by the controller as "exit once motion is done" (driver.c exited only outside CYCLE/JOG/HOMING), so the job ran on until the 5 s SIGKILL escalation and the exit safing (escalating to SIGKILL, exit status 0x9). Fixed on both sides and bench-proven the same session: forgectrl 3edb7bd writes cnc/stop + cnc/laser_latch=1 before the SIGTERM (kernel-level, instantaneous, no-op when idle); grblHAL 5960f05 treats SIGINT/SIGTERM during motion as ^X (controlled decel, latch relocked, alarm) and exits on the next pass, with the handler kept installed so the supervisor's second SIGTERM cannot hard-kill it mid-cleanup — CI case sigterm-mid-job (exit in 0.10 s; the old logic fails it). Re-run with the new binaries installed: POST returned in 0.46 s, grbl controller exited (status 0x0) with no SIGKILL, kernel idle and armed:false at the first post-stop sample, emission gone within the counter's ~1 s window; the operator saw ~1 s / a few mm of cut, then the stop. Also found and fixed: auth.c read X-ForgeFIRM-Token/Host/Origin/ Sec-Fetch-Site case-sensitively (a title-casing client was refused); now u_map_get_case. Bench tooling for the session is committed (scripts/bench/platform_drills.py, live_fire_drills.py ircut / expstop / ctrlstart, fdscan.sh). Session rules, now standing: one live-laser run per turn with the operator's confirmation before the next; only observations, never inferences, in live-fire reporting. Dry drills the same session, all PASS on the board: decay/microstep readback per axis (every value reads back, out-of-range 3 refused EINVAL); dead-man trip readback (closing the flock'd fd mid-run → closed while locked and driver is running! Emergency stop, pic/head/ thermal: making safe; heater and TEC off, measure laser, UV LED and Z driver off, pump/exhaust/intake/air-assist unchanged); three rmmod/modprobe cycles with a thread reading state/position/faults/ hall_sensor throughout (6618 reads served, 14162 refused while unloaded, no oops/BUG/WARNING); the LED sequence (all bright / all dark / button pulse 300 ms / restore) behaved as commanded, operator-witnessed; the module's probe lines read EPIT clock 66000000 Hz and SDMA channel 26 reserved for pulse playback (script at halfword 7680) with no bank warnings; forgectrl's helper children (curl during /update/check, the snapshot path) never hold a pulse-device descriptor — only the controller does; a $H gfcloud homing session completed in 56 s with 7 accelerometer motion windows above the 500-count threshold at the ~100 Hz sampler (anchor written, H:1); a kernel panic (sysrq c) mid-move stopped motion instantly (operator-witnessed) and the board rebooted on panic=10 into a healthy state (liveness MOTION OK, controller running, latch commanded locked). Observed once, cause not established: after the three module reloads the first liveness probe read NO MOTION (p2p 343/241); the ladder's rail-off/re-probe recovered it (p2p 3466/2163) — a module reload resets the analog configuration, and the ladder exists for this. Head-absent negatives (head unplugged, machine powered up): the head driver fails probe (head not detected) and the whole head/ sysfs group is absent, so every head attribute reads as missing rather than as a number; neither the daemon nor the controller logs anything repetitive with the head gone; the liveness probe skips (head accelerometer not found) and the controller starts. Three findings, fixed and re-proven the same session: /status switches.head was EV_SW bit 7 raw (reads true with the head unplugged) — now real presence (the head group exists) and it read false; /mode said motion: "verified" after a probe that could not run — now "unverified" (forgectrl 73eda9a); and nothing gated arming on head presence — the GRBL controller now refuses the first laser-on of a job when the head group is absent, before the latch unlocks and before the button lights (grblHAL 91807a2, "laser fire blocked: no head detected" + ALARM:3, operator-witnessed: the button stayed dark). The K-11 runtime-I²C-error case (a present head answering badly) and the C-3 failed-head-capture case are not reachable with the head unplugged and stay open.

Phase 11 (licensing, legal, and documentation hygiene — the last phase) is code-complete and host-verified, 2026-08-15. Licensing: python3-gfhardware declares the libdc1394 Bayer decoder it compiles into gfhardware._cam (MIT AND LGPL-2.1-or-later in setup.py, SPDX lines on bayer.c/.h, the LGPL text shipped, the rebuild/relink offer stated in its README) and the BSP recipe carries MIT & LGPL-2.1-or-later with checksums on both license texts and the decoder header; the wlconf recipe declares the three regimes its vendored TI tarball actually contains (GPL-2.0-only & BSD-3-Clause & TI-TSPA, checksums on the GPL notice, COPYING, and the TSPA LICENCE; the packaged output is the GPL-2.0-only wlconf/ subtree — nothing from hw/firmware/ is installed; provenance recorded as TI WiLink8 R8.7 SP3 with its sha256; the TSPA text lives in the layer's custom-licenses); python-gfutilities anchors its checksum to the upstream repo's own LICENSE; the dead meta-openglow-bsp layer is removed; SPDX identifiers now sit on every grblHAL driver source, every kernel-module source and header, and the cloud-mode app files; the kernel module credits both authors and the third-party SDMA assembler tools. bitbake -c populate_lic on python3-gfhardware, wlconf, and python3-gfutilities succeeds against the bumped pins and deploys the expected license files. Controller robustness (grblHAL da4c8eb, CI green host-side): the pulse write treats -ENOMEM/-EAGAIN as bounded back-off (the UAPI's backpressure semantics), retries EINTR, and completes partial writes; the verdict parser trusts only a complete document (closing brace, 1 KiB buffer) and defaults a missing hold to true; the listen socket and accepted clients are close-on-exec so the homing runner can never keep port 23 bound; a missing or unwritable settings file falls back to a RAM-backed NVS with a diagnostic instead of a crash-respawn loop; -e/-p argument walks, the serial_wait ≥1 s busy spin, GFSINK_RATE/ GFSINK_DEPTH_MS ranges, the blocking delay's sys.abort test, and gfio_wr_attr short-write/EINTR/missing-attr semantics are all fixed; messages from the SCHED_FIFO shipper and from under the stream lock go through a raw write(2) (no stdio lock convoy); the --version C-flags string no longer carries toolchain path-remapping flags (the buildpaths QA warning). Daemon robustness (forgectrl ed2934b, -Werror build + unit test green): the controller environment is built before fork() and passed to execle() (no setenv in the child of a multithreaded parent), a SIGKILL escalation is never aimed at a pid the supervisor thread already reaped, the settings file is created 0600 (the cloud password lives there; the Python side matches), the verdict publisher refuses an over-long document, and the release download carries curl --max-filesize. laser_button_timeout_s, laser_disarm_s, and rail_settle_s are accepted by POST /settings (bounded like the controller's clamps) and have a home on the panel's GRBL tab. Docs: kas/README.md #5 states the real 16 MiB ring arithmetic (~84 s at 200 kHz; the PREEMPT_RT decision stands on the bounded-queue-depth argument), the deleted kernel-module-glowforge.bbappend/externalsrc references are gone from kas, release.sh, and the cold-build workflow, BUILD.md clones only what a builder needs, README.md states the homing dependency honestly (GRBL mode jogs and cuts cloud-free; $H is camera-referenced homing that needs a Glowforge session until switch homing lands), CLOUD.md and SERVICES.md agree that the supervisor starts controllers, UAPI.md's sysfs tree lists free/streaming/ underruns (with free stated as advisory — the -ENOMEM write return is the backpressure primitive) and the position counter wrap/saturate behavior, SERVICES.md carries a monotonic-clock rule (no RTC on the board), the COOL_FLOW_RISE_C derivation is documented for a third party to re-run (scripts/bench/README.md; the bench tools take GF_HOST and GF_SSH), the pre-first-light no-fire drill's citation names the retained reproductions (its one-off script was never committed), British spellings are corrected (the wire-protocol literal cancelled untouched), 3d-models/ is a git repo, dev-machine paths and the build-distro name are out of every tracked file, and the doc-nit bundle (dual-boot wording, tested_against_gf described as it is wired, the image recipe comment, the bench README tool list, the panel's System tab) is closed. Pins: forgectrl ed2934b, grblHAL da4c8eb, kernel module 1862ad3, gfhardware 6c7534a, gfutilities 6d309ae — all pushed, bumped, and bitbake -c fetch-verified. Bench (operator, 2026-08-15): the new controller and daemon binaries are installed on the board and the settings file is confirmed 0600 — Phase 11 has no open items.

Phase 10 (tests & CI) is code-complete; the safety rules are now machine-enforced. The grblHAL controller repo's CI builds the null-sink binary (driver sources under -Werror; the core submodule is upstream code and exempt) and runs three suites on every push: the laser stream emission harness (the G-1 class), a new armed-window lifecycle harness (scripts/bench/ laser_lifecycle_test.py: arm-once-per-job with M5/M3 persistence and the M2 close, sender-change re-consent, grace countdown in Hold, and blocking-verdict arm refusal — test-the-test proven: a build with the job-based window reverted fails the first discriminating assertion), and a switch-map decode truth table (D-13): the EV_SW mapping is extracted into a pure header and asserted, including the inverted remote-interlock sense whose flip would read a Pro lockout as satisfied-while-open, and the opt-in e-stop gating. forgectrl's CI builds with -Werror and the tree is warning-free (the remaining unused-result and deliberate-truncation warnings are now explicit) (D-30). kernel-module-glowforge has a CI at all (D-4): it cross-compiles the module against linux-fslc 6.12 with the Glowforge BSP overlay and config fragment, hardfp toolchain, KCFLAGS=-Werror — the same bar the recipe holds — with symbol resolution left to the image build (a modules_prepare tree has no Module.symvers). Every CI sequence was validated locally before pushing — and CI immediately earned its keep: running the harnesses as a non-root user exposed that the controller's mlockall(MCL_FUTURE) under a finite RLIMIT_MEMLOCK makes every later thread-stack mmap count against the limit, killing the stream threads at startup. Root (the production spawn) carries CAP_IPC_LOCK and is exempt, so the flashed image is unaffected; the lock is now root-only (grblHAL 12977eb). Not host-testable (bench items, documented per phase): the kernel latch relock-on-close and dead-man trip, and the motion-liveness gate.

Phase 9 (build, BSP, and release engineering) is code-complete and host-verified (all shell changes pass bash and POSIX-sh syntax checks; forgectrl builds clean). Shutdown order: controllers stop at K80, before forgectrl at K90, so runlevel 0/6 never tears down the cooling engine, fire gates, and broker under a running controller (B-4). The grblhal/gfcloud init scripts are real emergency levers routed through new authenticated POST /controller/stop|start endpoints — stop halts the child and holds supervision suspended, not idle-gated — with status verbs and path-anchored pkill fallbacks (B-6); the forgectrl restart self-kill guard matches /proc/pid/exe (B-5). slotmigrate gets the 2048-sector grow tolerance (no more MBR rewrite every boot on disks where the grow cannot land exactly), progress verification, and a three-attempt resize2fs bound with the counter on p3 (B-7). CONFIG_IMX2_WDT is pinned and the unconfigured watchdog daemon is deliberately dropped — the hardware watchdog is a boot/system watchdog, and a userspace petter only added the mid-job-reset failure mode (B-8). The booted-slot write guard compares device numbers and fails closed under any root= spelling (F-8); settings writes fsync before rename and never rewrite a file they could not read in full (F-11); the /data logs rotate size-capped at boot and hourly, and the camera stats spam dropped ~100× (F-16). Release path: release.sh rejects multiple versions and requires factory-era verification (explicit bypass only); mkfw.sh refuses to pack without the post-sign self-check; the installer verifies archive product/platform and prompts on a signed downgrade instead of installing it silently; installer/ffboot temp paths are mktemp (B-13, B-18, B-19, B-20). DTS: the bootargs fallback is console-only (no quiet, no hardcoded SD root) and the stale 128 MiB ring comment reads 16 MiB (B-11, B-12); wlconf data files are 0644 (B-16); the U-Boot v2020.01 pin's security posture is recorded in the recipe (B-17); the bench build scripts carry no machine-local paths (B-14) and the SSH banner escape is fixed (B-15). Bench items: runlevel 6 teardown order observed; forgectrl restart actually restarts; the routed emergency stop holds the controller down; a boot on a disk that cannot grow-to-last-sector does not rewrite the MBR; a PARTUUID= cmdline still refuses a write into the running slot.

Phase 8 (kernel-module hardening) is code-complete; rides the image flash. Probe: /dev/glowforge registers last so the error unwind can never deregister a device userspace already opened; the unwind clears the SDMA interrupt callback (previously dangling into devm-freed driver data across an -EPROBE_DEFER cycle) and releases the state dirent (K-7). Remove: every userspace surface comes down before the hardware — a concurrent attribute read can no longer reach gpio_get_value on freed descriptors — and the dirent is sysfs_put, not leaked (K-8). The fan-tach spinlock is initialized and taken in the IRQ handler (the cooling engine's fan verdicts ride these two 64-bit timestamps, which tear on arm32 unlocked) (K-9); tach IRQ setup cleans up after itself and records only actually-requested IRQs, with idempotent teardown (K-10). The LED trigger removes its attributes before the sync timer delete and serializes the simulation step against its store handlers (K-15). The kernel dead-man now halts instead of disabling — no 40 V rail drop, so a crash recovery is never left in the exact state that wedges the DRV8825 drivers (K-18). Bounds: the safing-path pin-change off-by-one (K-14); ignored_faults capped to the documented 0–7 with the probe fault state decided on the masked value (K-16); PIN_LASER_ON_HEAD joins the SDMA pin set and the stop/shutdown change sets (K-19); the run-start no-data gate refuses the run on a failed head fetch (K-20); PIC single-register writes reject values above the documented 10-bit range instead of wrapping (K-21). Bench (on the flashed image): module load/unload clean under CONFIG_DEBUG_MUTEXES; forced -EPROBE_DEFER unwinds without a dangling callback; concurrent cat during remove does not fault; the Phase 1/3/5/6 kernel drills all re-run green on this one image.

Phase 6 (motion integrity) is code-complete and host-verified. A mid-run underrun or stepper fault is no longer silently absorbed: the shipper polls cnc/state at its own cadence while a kernel run is in flight and raises the stream fault path — disarm, homing-anchor invalidation, alarm — the moment it happens (G-2), and the sanctioned one-shot underrun retry now invalidates the anchor and logs position-untrusted instead of leaving homed:true standing (G-3). The supervisor unlinks /run/grblhal.homed on every controller transition, so a homed GRBL anchor cannot survive into cloud mode, which re-zeros the counters it anchors (X-5). Kernel rows (ride the pending image flash): backtrack is bounded by what is physically intact in the ring and refused outright once the ring has been live-streamed since the last clear (K-5); resume range-checks against the 28-bit waypoint field instead of silently truncating — 268 435 457 no longer becomes a waypoint of 1 (K-12); pulsebuf_total_bytes is 64-bit with a saturating 32-bit position ABI, so a long stream cannot wrap it mid-soak (K-5); ring mutators are mutex-serialized — concurrent writers on the inherited fd, the clear-vs-run TOCTOU, and the run-start scratch publish (K-13); and STATE_FAULT is recoverable via enable once every non-ignored fault line physically reads clear, so an edge glitch no longer bricks motion until module reload (K-6). UAPI.md documents all the contract changes.

Phase 7 (cloud-mode robustness) is code-complete and host-verified; all hot-deployable. Cloud now fails toward stopped-and-safe: the service loop survives malformed frames with safing in a finally, and a dead WS client thread ends the session cleanly for the supervisor to respawn (C-2); network exceptions no longer kill the reconnect thread — an hourly reconnect during a DNS blip cannot take the machine offline permanently (C-4); the in-run safety poll cannot be raised out of (cnc.state degrades to FAULT, the verdict reader covers TypeError and future-dated timestamps) and _action_cleanup stops motion, not just the beam (C-6, C-24); an accepted action is never dropped and a crashed one emits a terminal :failed (C-11, C-12); the cooling reporter is exception-proof with a parting report (C-13); Z homing is bounded (C-15). Input clamps: pulse-header values clamp to their now-live min/max bounds before touching motion hardware (C-9); load_motion validates the header before the first byte reaches the ring and its failure return is handled (C-10); the −273.15 dead-sensor sentinel no longer passes the start-temp gate (C-16); the dead firmware_download() is deleted (C-19); EMULATOR.BYPASS_HOMING keys on a code-set emulator marker (C-21). Hygiene: tokens no longer reach the logs — no forced DEBUG, no sign-in dump, owner-only log files (C-8); the homing accelerometer witness samples at ~100 Hz instead of saturating the head I²C bus (C-14; re-verify the motion-window counts against the characterized thresholds on the next live homing); one hostname derivation, fuzz-verified over 200 k serials with the short-serial trailing dash fixed (C-18); bounded TX queue + locked response_id (C-20); plus C-17/C-22/C-23. Bench items: null-sink starve drill (sender alarms, homed invalidated, armed job refuses at the stale origin); STATE_FAULT glitch recovery without a module reload; malformed-frame and DNS-blip injections against a live session; oversize/bad-header job rejected before the ring loads.

Phase 5 (physical-evidence instrumentation) is code-complete and host-verified. The machine now watches what it does, not just what it commanded. The cooling engine's 1 Hz tick runs the witnesses: cnc/laser_on_sampled — the sampled, gated output of the hardware AND-gate — is the emission ground truth, and emission sensed with no armed window in the recent past stops motion and locks the latch (repeating while the evidence persists); laser power-good degradation during an armed window warns once per session; cnc/faults transitions are warned during a run; pic/hv_current (the only live HV telemetry) is ranged per job (A-1, A-4, A-5). The GRBL controller carries its own in-process witness: emission sensed while the armed window is closed relocks the latch and raises an alarm (A-1 ctrl half). The four pic/lid_ir_* channels are polled every tick — each job logs baseline and peaks (the characterization dataset), and the fire-abort gate (cool_fire_ir_delta: sustained rise above run-start baseline → motion stopped, latch locked, verdict FIRE + hold, smoke airflow held) ships watch-only (delta 0) until the sensors are characterized on the bench (A-2). /status exposes the sampled evidence, faults, HV, and lid IR; the panel's latch row is relabeled commanded with sensed emission and power rows beside it. Cloud: a failed head capture can no longer leave the measure laser lit — the capture runs under try/finally and _action_cleanup extinguishes the head emitters (C-3). Kernel (rides the pending image flash): the head I²C read helpers return signed values with errno propagated, so a bus glitch reads as an error instead of beam_detect_analog=65531 / accel_irq=1 — the witnesses can no longer be spoofed by a failed read (K-11). Host verification: forgectrl and the controller build clean, stream harness all-PASS byte-identical, cloud client byte-compiles. Bench items: command a fire window and confirm laser_on_sampled tracks it (and confirm the idle-state PGOOD polarity for the panel row); force a head I²C error and confirm the witnesses report error, not a positive; baseline the lid IR channels across real jobs and set cool_fire_ir_delta; confirm a failed head capture leaves the measure laser off.

Phase 4 (stale-gate cluster) is code-complete and host-verified; all of it is hot-deployable (no kernel rows). The operator-armed window is now job-based, not 60-second-idle-based: it closes at program end (M2/M30/%, through the kernel-idle-guarded relock so a queue tail is never severed), whenever the sender connection changes (the serial layer exposes a client-session generation; the press that armed the window belongs to the displaced session), and after the disarm grace — which now counts down in Hold, Door, and Tool Change too, so a job abandoned in Hold no longer sits armed for hours (X-3, G-10). The coolant fire gate is re-checked after the button wait, immediately before the window opens (G-4), and the wait budget is clamped to 1–3600 s — garbage or zero can no longer mean wait-forever with the latch unlocked (G-18). Cloud mode's _button_wait gets the same treatment: bounded by the shared laser_button_timeout_s, lid re-checked every pass, and timeout/lid/cancel all relock the latch and disarm (C-7). The cloud cancel-drop is fixed: a settings action rejected mid-print no longer wipes the running action's id, so a subsequent cancel actually stops the cut (C-1). forgectrl: a controller stop that times out restores supervision instead of leaving the machine permanently controller-less (F-7); settings mutations are lock-serialized and a multi-key POST lands as one atomic replace (F-10); graceful shutdown is busy-aware — fans hold their duty and the verdict ages out instead of being unlinked, so forgectrl restart no longer feed-holds a live cut and drops exhaust (F-12; the flow-check heater still goes off unconditionally, as this engine's own heat source). Host verification: forgectrl and the controller build clean, the null-sink stream harness passes all emission rules byte-identical to the recorded baseline, and both Python clients byte-compile. Bench items: finish a job and confirm disarm at Idle within the cycle (not at +60 s); abandon a job in Hold and confirm it disarms; kill the pump during the button wait and confirm arming refuses; cancel a cloud print with a settings action in flight and confirm motion stops; forgectrl restart mid-(dry)-cut holds exhaust. These are dry/no-fire drills except where GATE A already applies.

Phase 3 (broker ownership / dead-man second pass) is code-complete and host-verified. The "broker changed who owns safing" theme is closed on the code side. The supervisor writes the two safing lines (cnc/stop, cnc/laser_latch=1) on every transition out of a running child — mode switch, diagnostics suspend, shutdown, not just unexpected death — and again immediately after a SIGKILL escalation (F-3). The cooling engine is the dead-man for hangs: a controller silent past the 5 s report timeout with the armed window open — or with cnc/state still reading running (a preloaded cloud ring can play for minutes with no live feeder) — gets the same two writes from the engine itself, and exhaust/intake never drop below cooldown duty while the kernel still reports a run in progress (X-1). The broker fd is now O_CLOEXEC with only the controller spawn clearing the flag, so curl/fwup/media-ctl children can no longer pin the pulse device, defeat the final-close backstop, or EBUSY-storm a respawn (F-6). The GRBL stream shutdown relocks the latch explicitly, since under the broker its close is not the final close (G-6); the cloud _shutdown hook stops motion, locks the latch, and files a final disarmed/idle report in all modes — gfcloud and gfhome share the hook (C-5). OOM/RT hardening: oom_score_adj respawn wrapper −1000 / daemon −900 / controllers −500, and the controller mlockalls so the SCHED_FIFO shipper cannot take a major page fault (X-6; the MHD connection cap remains the deferred half of F-15). Kernel rows ride the pending image flash: pulse-device exclusivity is an atomic in-use bit instead of a mutex locked in open() and unlocked in release() — cross-task release is the normal case under the broker (K-4); a fresh open starts with the flock dead-man disarmed and shared locks are rejected (K-17); thermal_make_safe() de-energizes only the heat sources (heater, TEC) — the coolant pump and exhaust/intake stay with the cooling engine, so a dead-man trip no longer stops circulation and airflow over a hot tube or airlocks the pump, and the heater soft-PWM duty is zeroed so its timer holds the pin low (X-4). SERVICES.md now records the watchdog scope — the hardware watchdog is a boot/system watchdog, not a laser-safety watchdog; the fast beam stop is the ring-drain chain, and the cloud-ring-depth residual is covered by the engine's hang dead-man (X-7) — plus the full dead-man ownership map. Host verification: forgectrl and the controller build clean (-Wall -Wextra), the null-sink stream harness passes all emission rules on the changed controller, and the cloud client byte-compiles. Bench drills pend the image flash: SIGSTOP a controller mid-(dry)-run — motion stopped and latch locked within the silence window, airflow held at ≥ cooldown duty; kill forgectrl during an update download — no pinned device, no EBUSY respawn storm; re-run the armed kill drill on the expected-stop path; a kernel dead-man trip leaves pump and airflow running.

Phase 2 (GATE B, control surface + release) is code-complete and host-verified. forgectrl now has one auth layer applied to every endpoint (src/auth.c): a first-boot bearer token in /data, embedded in the panel and required on every state-changing call; a Host address-literal check plus Sec-Fetch-Site/Origin validation that refuses cross-site (CSRF) and DNS-rebinding requests; /cool/state restricted to a loopback peer so a LAN client can no longer spoof a thermal stand-down (F-1, F-2). The irrevocable fuse view and unsigned-firmware installs additionally require the physical button held (F-19, F-1). A native unit test of the real auth.c decision logic passes all ten cases (authorized POST allowed; CSRF refused even with a token; rebinding host refused; missing/wrong token refused; panel bootstrap refused over a rebinding host; loopback report allowed, LAN spoof refused). Also fixed: the reply_settings accumulator overflow and its unbounded validators (F-4, F-18); cooling-tunable caps + a resume-below-max cross-check + a loud flow-checks-disabled indicator (F-5); the upload path is auth+idle+job gated (F-9); the liveness probe refuses to move the gantry with a lid/interlock open (F-13); update_job_running() cross-checks added to the diag and mode-switch gates (F-14, partial — targeted checks, not yet a single-lock arbiter); machine_is_idle() fails closed on a read error so a connection flood can no longer read as idle mid-cut (X-2); the fd ceiling is raised (F-15, partial — the MHD connection cap and moving the camera ensure_engine popen()s out of the HTTP callback are deferred); esc() and the panel attribute/innerHTML interpolations are escaped (F-20); the restore sh -c double-shell is gone and the archive name is charset-restricted (B-9). Release engineering: debug-tweaks moved out of the shared kas config into forgefirm-image-dev.bb so the release forgefirm-image is no longer passwordless-root, with a release.sh gate that reads the built rootfs /etc/shadow and fails on an empty root password (B-1); the installer copies ffboot out of the signature-verified new rootfs instead of curl-ing it from a mutable ref (B-2); CONFIG_PANIC_ON_OOPS=y + panic=10 route a kernel oops into the laser-safing panic handler (B-3, rides the image flash). GATE B requires a bench pass (a CSRF probe from a second host rejected; a spoofed /cool/state no longer drops the fans; a 13-max-length POST /settings does not crash the daemon; a built release image shows a non-empty root password), after which — combined with Phase 0's safety/regulatory text — the first public .fw is allowed.

Phase 0: user-facing laser-safety and regulatory text is in place (LIGHTBURN.md "Before you cut", README, INSTALL.md "Regulatory and legal" + updater-first update path, a persistent panel safety banner), the walkthrough no longer claims the laser cannot fire, bench-machine identity and the signing-key location are scrubbed from tracked files (bench scripts take GF_HOST), and every repo has a commit-msg hook enforcing commit attribution. Phase 1 (GATE A, uncommanded energy) is code-complete and host-verified: the stream engine records the cycle-end laser-off so idle-gap pads ship dark and every stream terminates FIRE-clear (G-1), latch writes are serialized against the shipper's relight (G-5) with the arm-state and verdict caches made properly atomic (G-19/G-20/G-21), the cooling report path moved to a bounded-connect reporter thread off the protocol thread (A-3/G-7), and gf.lock is priority-inheriting with PIC-SPI and rail-settle work moved outside it (G-8). Kernel fixes K-1 (saturating decel ramp + EPIT divisor clamp), K-2 (resume-waypoint latch guard) and K-3 (latch writes under status_lock; FIRE drive never restored mid-run or mid-ramp) are code-complete and ride the pending full-image flash with the platform-hygiene batch. scripts/bench/ laser_stream_test.py now asserts the termination and zero-step-gap rules across M4, M3-to-stream-end, and cycle-churn sessions (with a hermetic cooling-verdict publisher): all PASS on the fixed controller (the M4 session reproduces the recorded baseline byte-for-byte: 28 354 fire ticks, X peak 533 net 0, 534 dark return steps), and a build with only the G-1 hunks reverted FAILS on the M3 termination rule — the harness catches the defect class. GATE A stays open — no live-fire — until the flashed image passes the bench drills (controlled stop decelerates at the default cloud tick, resume with the latch locked stays laser-less, mid-ramp latch writes do not re-arm FIRE) and the harness is wired into CI.

Previously — shared machine services complete and closed out (2026-08-13). forgectrl is the one machine-services daemon behind both controller modes: the cooling engine (single owner of the thermal hardware), controller-mode supervision, the pulse-device broker, and the motion-liveness gate. Both controllers are cooling-engine clients that enforce the published verdict in-process, and cloud mode ran an 11.4 h signed-in soak on that final stack (12 auth-token refreshes, clean stop from the panel and from SIGTERM). First light landed 2026-08-11 (GRBL mode, operator-run) and the armed kill-mid-FIRE drill passed 2026-08-12. The contract is forgectrl/docs/SERVICES.md; what is left of that work is item 8 under Next work.

Previously — SD images 20260808011035 built (forgefirm-image + -dev): the first images carrying the whole control-panel era — gfcloud homing, the OpenGlow-branded panel with the /status dashboard, controller-mode selector + boot dispatch, the idle settings lock, and all four platform bug fixes (estop gate, cnc.halt, forgectrl-routed captures, blocking dms chain). Also: the control panel carries the OpenGlow visual identity (navy header + recreated starburst wordmark, light content, laser red as accent only) and the status page is an operational dashboard: motion state + true machine position (kernel step counters anchored at homing via /run/grblhal.homed — the Grbl socket is never polled, a connection there displaces the sender), coolant temps, pump/TEC, all four fan tachs (air assist µs @ 8 ppr, chassis fans ns @ 2 ppr — live-checked), laser lockout (interlock_circuit b3; cnc/laser_latch is write-only), and the safety switches via EVIOCGSW (head sense reads not-detected with a working head — display it dim, not alarming). Previous same-day work: control panel + calibration + identity overrides + multi-key /settings; gfcloud homing LIVE-VERIFIED end-to-end ($H → homed at the factory corner in 65 s; four platform bugs fixed — see Next work #3); fd-blocking protocol pacing; the fortify step_us_min fix. Read together with kernel-module-glowforge/UAPI.md (the pulse-stream feeder contract) and forgectrl/docs/SERVICES.md (the machine-services contract).

Where the project stands

Platform bring-up: complete and hardware-verified. Both motion blockers fixed (cnc probe / 40v-supply; SDMA script relocated to <26 0xF00> with a pre-run integrity guard); the end-of-data protocol reworked and bench-proven (underrun is a first-class underrun state behind the streaming attr; 16/16 protocol bench); laser PWM verified at 39.98 kHz (register level); CONFIG_PREEMPT=y; uEnv/u-boot/ulfius build integrity restored; legacy cloud mode repaired (nvmem identity → fuse hostname verified; deadman/safety loop; camera error paths).

The controller spike: achieved.

• grblHAL (unmodified core) runs on the board, speaking Grbl 1.1f over TCP port 23 (LightBurn-confirmed).
• Underrun proof: 100 kHz × 120 s under full load, 150 ms queue, 0.2 ms worst write latency, zero underruns. Measured SDMA script ceiling: ~165 kHz effective (~6 µs/byte).
• The step backend works: the driver resamples grblHAL's step events into pulse bytes and live-feeds /dev/glowforge. X and Y jogs from TCP G-code move the real gantry; grblHAL and kernel position counters agree step-for-step. Motion-only: the laser latch is forced locked, byte bit 4 is never emitted.

First real LightBurn job: 2026-08-02, operator-verified. Device setup per LIGHTBURN.md (GRBL over TCP:23); a full design job — rapid in, M4 dynamic-power cut trace at commanded speed, return rapid — ran smoothly end to end on grblHAL-glowforge (laser locked, motion only). Two driver fixes came out of the first attempts: the locked laser spindle (M4/$32 support without fire capability) and the continuation-wakeup cursor alignment (back-to-back cycles previously clamped into step bursts — jerky, step-losing rapids; found via the per-run clamped stat from the operator's own job log).

Milestone 2 (motion quality): bench-verified 2026-08-02. The factory motion constants were extracted from the _RESOURCES pulse files (scripts/bench/puls_profile.py) and applied end-to-end:

• grblHAL defaults now factory-true: 12000 mm/min max rate (X/Y), 700/590 mm/s² accel (X/Y). Machine tick default 28160 Hz (the factory's own travel-move tick; 10 kHz caps an axis at 187.5 mm/s).
• The sink now applies the whole analog machine config itself at init (modes, decay, motor_lock, PIC currents) and switches PIC currents run↔hold around motion like the factory did (135/22 running, 33/5 idle, drop deferred until the kernel queue has drained).
• Bench (scripts/bench/bench_m2.py, all green): sustained 200 mm/s on a 120 mm jog, exact round-trip positioning, feed-hold parks and resumes cleanly, current switching observed live, zero underruns at 28160 Hz.
• NOTE: stored $-settings beat freshly baked defaults — after changing GLOWFORGE_DEFAULTS values, run $RST=$ once on the board (the sim persists settings in its eeprom file in /data).

First light: 2026-08-11 — first GRBL-mode burn (operator-run LightBurn job, chain armed; details in the laser item under Next work).

Shared machine services: complete, bench-verified, and closed out (2026-08-11 … 2026-08-13). forgectrl is the machine-services daemon: the cooling engine (single thermal-hardware owner for both controller modes, flow verification and over-temp policy behind the /cool/state + verdict-file channels), the controller-mode supervisor (one managed child, live POST /mode switching, crash respawn with machine safing, a respawn wrapper on forgectrl itself with retake-at-idle), the pulse-device broker (one exclusive /dev/glowforge hold for the daemon's lifetime — handovers and respawns never cycle the 40 V rail), and the motion-liveness gate: the head accelerometer is the only truth about physical motion (the DRV8825 drivers can wedge unserviceably on rail glitches with counters running normally — see the hardware facts bank), so the supervisor probes real motion before each session's first controller spawn and gfhome refuses to report a homing the accelerometer did not witness. The contract for all of it is forgectrl/docs/SERVICES.md. Both controllers are clients of the engine: the GRBL driver's glowforge_cooling.c and the cloud client's coolsvc.py report job state at 1 Hz and enforce the verdict file on their own fire paths, each with a compiled-in run-duty fallback for the case where the engine is provably absent. Drilled on the board with the operator present: engine loss mid-flood and mid-flow-check (warning, fans held, heater dropped, restore and resume), an armed kill-mid-FIRE (FIRE gone within 15–171 ms, latch relocked, burn line ends abruptly), over-temp hold and auto-resume inside a real cycle, live mode switches, and a 11.4 h cloud-mode soak on the finished stack. Remaining polish: Next work item 8.

The bench

• Board: SSH root@<machine-ip> (dev images permit passwordless root login). The bench machine is a Basic/Plus (the control board is common to Basic/Plus/Pro). Dev image (forgefirm-image-dev) on SD; BusyBox userland + python3 + gdb/strace. Serial console on ttymxc0 available at the bench.
• Deploying kernels: re-burn the SD with the freshly built forgefirm-image-dev-glowforge.rootfs.wic.gz (deploy dir below). Why this works: U-Boot (in eMMC boot0) reads the saved env at eMMC user-area 0x80000, which selects the boot device (bench board: mmcdev=0 mmcroot=/dev/mmcblk1p1 = SD), then loads /boot/uEnv.txt and /boot/zImage from that rootfs partition — so the kernel always comes from the burned SD. Full map: "eMMC boot & recovery architecture" in the facts bank below. Module-only changes hot-swap: scp glowforge.ko over /lib/modules/<kver>/extras/, then rmmod glowforge && modprobe glowforge. NOTE: a module reload turns off the lid LED (relight via /sys/class/leds/lid_led*/target) and resets analog config (below).
• Module hot-swap vs kernel re-stamps: the hot-swap only loads if the module was built against the FLASHED kernel's patch state. Any edit under the kernel recipe's overlay (e.g. glowforge.dts) re-stamps CONFIG_LOCALVERSION_AUTO — and the stamp does NOT reproduce by reverting the edit (the kernel patch tree is a fresh git commit each do_patch, not sstate-restored), so after any overlay edit the module can only ship with a full image flash. Batch kernel-overlay edits accordingly. In the tree awaiting the next SD burn (batch of 2026-08-08): CFG80211/MAC80211 flipped to modules (the regulatory.db boot-message fix, bench record below), CFG80211_DEFAULT_PS off (power save default; forgectrl pins it off at startup regardless), and vs-supply = <&reg_3p3v> on the lm75 node (was the last queued cosmetic "dummy regulator" probe line besides the two SoC USB PHYs). Nothing else queued.
• Build host: a Linux build environment (a WSL2 distro works) holding the forgefirm + meta-openglow sibling checkout (BUILD.md); the ForgeFIRM source repos are fetched by pinned SRCREV. Build: cd forgefirm && kas shell kas/forgefirm-glowforge.yml -c 'bitbake forgefirm-image forgefirm-image-dev'. Artifacts: forgefirm/build/tmp/deploy/images/glowforge/.
• fwup lab (host): a host directory (<fwup-lab> below) holds host-built fwup-0.14.2 (factory-era) and fwup-v1.16.0 under bin/ and the DEV signing keypair devkeys/fwup-key.{priv,pub} (fwup-key-raw.pub = raw 32-byte form — what fwup 0.14.2 expects; 1.x reads both). Cross-version compat is proven both ways (modern-packed signed archives apply with 0.14.2; modern fwup verifies+applies the factory .fw — signer key 2017-05-001.pub). The production signing-key ceremony (UPDATE-SYSTEM.md gate 8) was executed 2026-08-08. The production release key is held offline by the operator — the installer embeds its public key, so releases sign with that key only. Pack releases with scripts/mkfw.sh; the full pipeline is scripts/release.sh, invoked as: FWUP=<fwup-lab>/bin/fwup-v1.16.0 FWUP_COMPAT=<fwup-lab>/bin/fwup-0.14.2 FORGEFIRM_DEV_KEY=<fwup-lab>/devkeys/fwup-key.priv FORGEFIRM_SIGNING_KEY=<release key> RELEASE_STAGING_DIR=<dir> ./scripts/release.sh <version> (the publish step needs an authenticated gh; release.sh prints the exact command).
• Shell gotchas (cost real time): PowerShell mangles embedded double quotes in git-commit here-strings (avoid " in messages); wsl -- bash -c '...' eats $VAR expansions (use script files run via PowerShell, not Git Bash, which MSYS-mangles /mnt/c paths).

Running the controller (grblHAL-glowforge on the board)

Source: the grblHAL-glowforge sibling repo — the canonical grblHAL driver repo (github.com/ScottW514/grblHAL-glowforge, branch main): core as a submodule at src/grbl (→ ScottW514/core fork, branch forgefirm = upstream master + the step_us_min buffer fix pending upstream; the settings-write crash fix merged upstream 2026-08-04 as grblHAL/core PR #999), driver.c implementing the HAL, machine constants in src/boards/glowforge.h. The controller is spawned and supervised by forgectrl: the supervisor starts the controller selected by controller_mode (grbl | cloud) as a direct child, respawns it on a crash (after safing the machine), and switches modes live via POST /mode / the Status-tab selector. The grblhal and gfcloud init scripts defer to it (they remain only as manual emergency stops). The pulse device arrives as a broker-inherited fd (GF_PULSE_FD; see the pulse-device ownership section of forgectrl docs/SERVICES.md) — the device never closes across mode switches, homing handovers, or respawns, so the 40 V rail never cycles as a side effect, and the supervisor verifies physical motion (head-accelerometer liveness probe) before the first controller spawn of each session. Architecture: a wall-paced producer thread runs the core stepper ISR against a virtual step clock (1000× machine tick) and maps step events to pulse bytes; a SCHED_FIFO shipper feeds /dev/glowforge with the bounded queue; a recursive core mutex stands in for interrupt masking. GFSINK unset = null-sink mode (full engine, no hardware I/O — host testing).

1. Build: bash <repo>/forgefirm/scripts/bench/build-glowforge.sh in the build environment (from Windows, launch it through the WSL distro from PowerShell — Git Bash mangles /mnt/c paths). Produces build-arm/grblHAL_glowforge in the checkout (-O1 -g; machine constants live in src/boards/glowforge.h, force-included into the core: 53.333 µsteps/mm XY @ ×8, 2.832 half-steps/mm Z, 0.417" Z travel, 12000 mm/min max, 700/590 mm/s² accel — factory-derived, see puls_profile.py).
2. Deploy: move the new binary over /usr/bin/grblHAL_glowforge (mv replaces the inode, so the running instance is untouched), then kill the running controller — the supervisor respawns it on the new binary within about a second.
3. Standalone start (bench/debug only — requires forgectrl stopped, since the broker's exclusive hold on /dev/glowforge makes any self-open fail EBUSY): cd /data && GFSINK=/dev/glowforge grblHAL_glowforge -p 23 -e /data/EEPROM-glowforge.DAT. Env knobs: GFSINK_RATE (machine tick, default 28160 Hz = factory travel tick), GFSINK_DEPTH_MS (queue depth = feed-hold latency, default 200). Standalone, the driver opens the device itself and every takeover runs the rail_settle_s off-period; under the broker it inherits the fd and skips the settle (the rail never dropped). The driver applies the full analog machine config at init either way (×8 modes, decay 1, motor_lock 8, laser latched, PIC hold currents) and swaps PIC run/hold currents around motion. If the baked $-defaults changed since the last run, $RST=$ once (stored settings win). Each motion run logs a producer-stats line to stderr (callbacks, µs/call, max-behind, clamped) — clamped should stay 0.
4. Connect LightBurn/UGS to <machine-ip>:23, or jog raw: $J=G91X40F1200. ^X mid-motion aborts via kernel cnc/stop (controlled decel) and raises an alarm; TCP disconnects never kill the process (the deadman fd stays held).

Protocol-loop pacing is fd-blocking (2026-08-07). serial_wait() drains TX then ppoll()s the listen/client fds with the state-dependent timeout (idle/alarm 10 ms — 1 ms while a delay callback is pending — motion 200 µs), so traffic wakes the loop instantly while idle ticks stay coarse. Bench-verified: idle CPU 7–12% → ~2% (1.95% with the camera streaming beside it), status RTT ~1.0 ms median, jogs exact, clamped 0 with an active stream. Client RX is armed only while the ring has a full read's worth of room, so a flow-control-violating sender is paced, not spun on.

Fortify overflow fixed in the core (2026-08-07): images before this fix boot with a DEAD controller. The Yocto-built binary (compiled with -D_FORTIFY_SOURCE) aborted at settings_init — "buffer overflow detected" in /data/glowforge.log — before serving: the core's step_us_min[4] holds ftoa(hal.step_us_min, 1) and our 28160 Hz stream tick renders "35.5" (5 bytes). Bench builds (no fortify) silently truncated the adjacent unit string instead, which is why it never showed on the bench. Fixed by sizing the buffer (the single local commit the core fork's forgefirm branch carries atop upstream master); $ES now reports [SETTING:0|…|35.5|…] intact. Repro/diagnosis path if ever needed again: scripts/bench/build-glowforge.sh variant with -D_FORTIFY_SOURCE=2, gdb set breakpoint pending on + break __chk_fail, run on the board. Whole-image boot verified 2026-08-07 on the flashed 20260807214320 SD: both services autostart from the image binaries — grblHAL (fortified) serves at 1.0 ms RTT with exact jogs, $0 min 35.5 intact, $H rejected ($22=0); forgectrl streams 15.0 fps, "buffers":"cached", vpu, 41% CPU; grblHAL idle 2.1%.

The machine-services daemon (forgectrl, port 8080)

Source: the forgectrl sibling repo — the canonical repo (github.com/ScottW514/forgectrl, branch main, MIT). forgectrl is the ForgeFIRM machine-services daemon: controller-mode supervision (it spawns exactly one of grblHAL / gfcloud as a direct child, respawns on crash after safing the machine, and switches live via POST /mode), the pulse-device broker (one exclusive hold on /dev/glowforge for its lifetime; controllers inherit the fd, the rail never cycles on handovers, and the supervisor is the writers' dead-man), the motion-liveness gate (head-accelerometer probe before the first spawn of each session, with a rail-off recovery ladder for wedged DRV8825 drivers and a loud motion-fault state), the cooling engine (single owner of fans/pump/TEC/heater for both modes: POST /cool/state job reports in, the /run/forgefirm/cooling.state verdict file out), plus cameras, telemetry, settings, diagnostics, the web panel, updates, and the logging tree (GET /logs, /logs/tail, POST /logs/export; forgectrl --render-syslog at boot). It runs under a respawn wrapper (its init script) and a restarted daemon retakes supervision automatically once the machine is idle. The meta-forgefirm recipe pins its SRCREV (bump deliberately after pushing) and installs the sysvinit script from the repo's init/; bench builds cross-compile with forgefirm/scripts/bench/build-forgectrl.sh (same toolchain-borrow pattern as build-glowforge.sh). The machine-services contract — the EV_SW switch map, the authoritative sensor conversions, the hardware single-writer ownership matrix, the cooling channels, mode supervision, pulse-device ownership, and logging — is forgectrl/docs/SERVICES.md in the forgectrl repo. One ulfius daemon serves it all, including both OV5648 cameras as MJPEG over the mainline imx-media pipeline:

• GET / — the tabbed machine control panel (Status / Machine / GF Cloud / GRBL / Diagnostics / System; ui.c — System carries the A/B slot selection, ForgeFIRM updates, image install/restore, the wireless regulatory region, and reboot): status page with the controller-mode selector (live switch through the supervisor; the setting persists for boot), the operational dashboard, a scaled lid snapshot + on-demand live stream, and the settings forms for display units, homing method, home-position calibration, the nine cooling tunables, identity overrides, and the session timeout. All settings controls disable (with a banner) while the machine is not idle or a diagnostic is running. /?action=stream|snapshot remain the mjpg-streamer- compatible aliases (lid camera; LightBurn uses the stream one). Panel conventions (2026-08-08, operator-directed): the header identifies the machine by its fuse identity — the factory hostname derived from the OCOTP serial (HW_OCOTP_MAC0 base-23 over BCDFGHJKMQRTVWXY2346789, XXX-YYY; the C implementation matches gfhardware id.py over 200k random serials) — regardless of any cloud identity override; the gf_hostname override is REMOVED (the service hostname always derives from whichever serial is in effect — gfhome.py re-derives it from an overridden gf_serial); units are a display-only preference (ui_units metric | imperial): the backend stores metric, lengths convert mm↔in, absolute temps °C↔°F, temperature DELTAS (the flow-rise family) scale by 1.8 with no offset, and saves post only fields whose display string changed (dirty tracking — unit round-trips never masquerade as edits); position always shows, counters-only and painted red while unreferenced (the machine moves fine unhomed — relative to wherever it started), normal once anchored; sender hints are unopinionated (no named Grbl clients).
• GET/POST /settings — the shared machine settings store (/data/forgefirm.conf, validated keys incl. controller_mode and the cool_* cooling tunables, empty-value-clears via query params; gf_password write-only). Writes 409 unless cnc/state is idle (the controller and homing runner read the file mid-run) — live-verified during a jog — and 409 while a diagnostic owns the hardware.
• GET /mode / POST /mode?controller=grbl|cloud — the supervisor: current mode, controller state (running | stopped | standby | motion-fault), pid, and the motion-liveness verdict (verified | unverified | fault); the POST is the live idle-gated mode switch and the retry lever after a motion fault.
• POST /cool/state (job-state reports from the active controller, level-triggered ~1 Hz) and GET /cool/status (engine phase, verdict, temps, report age) — the cooling engine's channels; the verdict the controllers enforce is the /run/forgefirm/cooling.state file, per the SERVICES.md contract.
• POST /diag/flow-verify, POST /diag/flow-calibrate, POST /diag/abort, GET /diag/status — the diagnostics runner (own section below). GET /status carries a diag flag for the UI lock.
• GET /cam/stream?cam=lid|head — multipart MJPEG at 1296×972 (2×2 Bayer-superpixel demosaic, JPEG q75; FORGECTRL_STREAM_Q overrides; FORGECTRL_STREAM_FPS caps the frame rate, unset/0 = sensor max).
• GET /cam/snapshot?cam=lid|head&res=full|half&q=1..100 — single JPEG, default full 2592×1944 (own MIT bilinear demosaic, output verified against the gfhardware reference grab).
• GET /cam/status — JSON (running/cam/clients/frames/fps/fps_cap/ encoder/buffers).

Engine model: one worker owns the V4L2 node persistently (media-ctl / v4l2-ctl configure sequences identical to gfhardware/cam.py, factory exposure/gain/WB, software hflip in the demosaic); starts on demand, full teardown after 10 s idle so gfhardware one-shot grabs still work. The cameras share the hardware video-mux; the NEWEST request wins it (single-operator model):

• Streams preempt. A STREAM request for the other camera kicks the current stream clients - their streams end cleanly (viewers freeze on the last frame) - and switches. The only stream failure mode is a switch timeout (a kicked client not draining within 3 s).
• Snapshots borrow. A snapshot of the other camera does not switch: the worker pauses the stream, switches, grabs one frame, switches back (~1-2 s freeze; "Head peek" on the index page uses this). Arbitration compares against the engine's home camera, so stream requests racing the borrow window preempt correctly. The per-camera lamp (pic/lid_led / head/white_led) is raised to FORGECTRL_LAMP (default 132) while capturing and restored on idle.

Bench (2026-08-03, on the board): stream 15.0 fps sustained at 1296×972 (NEON demosaic + VPU encode; 3.2 fps on the full software fallback); full-res snapshot 2.4 s warm / 2.7 s cold (cold includes the pipeline bring-up); two parallel same-camera clients share the frame rate; idle teardown observed. Borrow verified: head snapshot 200 during a lid stream, the stream riding through the ~1-2 s gap. Preemption verified: a head-stream request ended the lid viewer's stream cleanly (curl exit 0 mid-stream) and was serving head frames within ~2 s; switching back likewise. Motion coexistence proven: X round-trip jogs at F1200 with an active stream — producer stats clamped 0, max behind 4.5 ms (the daemon runs at nice +5, single core). Run by hand: /usr/bin/forgectrl & — it logs through syslog (/data/log/forgefirm/forgectrl/forgectrl.log; a terminal, or FFLOG_STDERR=1, echoes the lines) — after /etc/init.d/forgectrl stop (kill before scp when redeploying, text-file-busy).

LightBurn consumes the stream directly — operator-verified 2026-08-03 ("without issue", via the mjpg-streamer-compatible /?action=stream alias) while jogging the machine from the same LightBurn session.

VPU JPEG offload: DONE 2026-08-03, bench-verified — 7.9 fps (2.5× the software rate). The stream path demosaics the 2×2 superpixels straight to planar YUV420 (JFIF full-range 601) and the CODA960 VPU JPEG encoder (mainline coda, V4L2 mem2mem; found by personality, not node number) does the encode: per-frame copy 43 ms + convert 75 ms + encode 7 ms. Two hard-won facts:

• Coherent V4L2 MMAP capture buffers are uncached — demosaicing in-place out of one costs ~340 ms/frame at this resolution; one bulk memcpy into a cached bounce buffer first (43 ms) makes the same demosaic run in 75 ms. The bounce copy is now the fallback path only — non-coherent (cached) capture buffers (below) are the default on the patched kernel, and all camera paths read the capture buffer directly through them.
• The VPU encoder accepts 1296×972 exactly (no MCU-alignment padding needed) with quality via V4L2_CID_JPEG_COMPRESSION_QUALITY.
• A CSI noise/glitch frame can out-size the coda driver's default ~2 B/px JPEG capture buffer (kernel logs "JPEG too large for capture buffer" + a vb2 WARN; observed once under streaming+motion load). forgectrl requests 3 B/px and drops error-flagged dequeues as single bad frames — hardware encode stays active; software fallback engages only on repeated consecutive hard failures. libjpeg remains the automatic fallback (FORGECTRL_NO_VPU=1 forces it) and the snapshot path; /cam/status reports "encoder".

NEON demosaic: DONE 2026-08-03 — 15.0 fps, sensor-limited. The YUV420 superpixel convert has a NEON kernel (vld2q deinterleave, vrhaddq greens, vmlal/vrshrn luma, vpaddlq block sums for chroma; FORGECTRL_NO_NEON=1 forces scalar): convert 75 → 18 ms, per-frame copy 34 + convert 18 + encode 7 ≈ 59 ms against the sensor's 66 ms frame period. The NEON and scalar paths are bit-identical — proven on a live frame via FORGECTRL_NEON_CHECK=1 (one-shot memcmp, logs IDENTICAL). Motion coexistence re-proven at 15 fps: jogs with an active stream show clamped 0, max behind 7.2 ms (~4 % of the 200 ms queue) — the worst-case contention signature so far; if real jobs ever clamp, a stream-fps cap knob is the relief valve. The IPU cannot help with demosaic (its IC is CSC/scale only — the imx-csc-scaler at /dev/video8 matters only for a future full-res stream). Not yet done: lens calibration / bed alignment (the fisheye needs LightBurn's camera calibration pass), and the deferred 5.6 emulator homing-image smoke (the cloud emulator can now be pointed at live snapshots).

Non-coherent (cached) capture buffers + stream FPS cap: DONE 2026-08-07, bench-verified on the flashed patch-0010 image. The remaining per-frame CPU cost was the ~34 ms bulk copy out of the uncached V4L2 MMAP buffer. forgectrl REQBUFS with V4L2_MEMORY_FLAG_NON_COHERENT; kernel patch 0010 (meta-glowforge-bsp linux-fslc, allow_cache_hints on the imx capture queue) makes vb2 honor it — CPU-cached mmaps with the cache invalidate done inside DQBUF — so the demosaic reads the capture buffer in place and the bounce copy disappears. Bench (2026-08-07, flashed image): stream stats dqbuf 0 ms, copy 0 ms, convert 19-20 ms, encode 7 ms (the invalidate is sub-ms in practice), 15.0 fps sustained, daemon 41.5% CPU with one viewer vs ~66% on the bounce path — per-frame CPU roughly halved (~27 ms vs ~60 ms busy). Full-res snapshot through the cached path visually verified (clean fisheye bed image, live frames differ). Detection is by the MMAP_CACHE_HINTS capability bit: on a kernel without patch 0010 the daemon falls back to the bounce-copy path unchanged — fallback bench-verified 2026-08-07 on the unpatched kernel (copy 35 ms / convert 18 / encode 7, 15.0 fps, vpu — identical to before). /cam/status reports "buffers":"cached|uncached"; FORGECTRL_NO_CACHED_BUFS forces the bounce path for A/B; the stats log line includes the DQBUF time. FORGECTRL_STREAM_FPS caps the stream rate — capped frames are requeued without demosaic/encode (snapshots still ride on them) and don't count toward fps — bench-verified 2026-08-07: cap 5 → 5.0 fps exact, daemon 23% CPU vs ~66% uncapped (bounce path; the relief valve if future CPU work needs headroom). Default stays sensor max. Images from 20260807204056 carry forgectrl at the bumped SRCREV (73283b6), so a fresh burn ships the right daemon.

Diagnostics (forgectrl-owned hardware tests)

The Diagnostics tab runs tools that take the hardware over: the runner (forgectrl diag.c, one slot) suspends the active controller through the supervisor (launch is gated on cnc idle + no diagnostic), drives the loop directly through sysfs — the same model as the bench characterization scripts — and resumes the controller on every exit path (completion, tool error, operator abort via POST /diag/abort, safety ceiling); the controller that returns is the selected mode's, whichever that is. The cooling engine suspends its own writes for the duration and publishes fire-blocked. /run/forgefirm-diag.active marks the ownership; forgectrl startup recovers a stale marker (stand-down + controller resume), covering a daemon crash mid-diagnostic. The laser is untouched throughout (latch stays locked). While a diagnostic runs: settings POSTs 409, /status reports diag:true, and the whole panel locks with a banner. Live progress (phase, elapsed, both coolant temps, a scrolling log) streams through GET /diag/status on a 2.5 s poll; results persist on the page until the next run.

Cooling tools (both run at the configured duty/window/threshold so the verdict applies to the check the driver actually runs; trials use cut-profile chassis fans = the characterization condition; pump-off windows hard-abort at 48 °C downstream):

• flow-verify (~3 min measured): one check with the pump on, one with it commanded off, judged against cool_flow_rise. PASS = threshold separates the readings; margins under 1.5 °C add a run-calibration warning.
• flow-calibrate (~15-25 min): 3 trials per case, alternating, with settle gates between; reports both bands and recommends threshold = (flow max + no-flow min)/2 with an Apply button, or refuses when the gap is under 3 °C (raise the duty and rerun) — the per-machine path for replacement coolant or a swapped pump.

Cooling tunables are conf-backed: the nine cool_* keys (flow_rise, flow_heater_pct, flow_check_s, recheck_s, confirm_max_s, temp_max, temp_resume, cooldown_s, cooldown_max_s) live in /data/forgefirm.conf (forgectrl Machine tab, validated ranges), and the cooling engine (forgectrl cool.c — the single fan/pump/TEC/ heater owner for both controller modes) re-reads them at every run start (env GFCOOL_* > conf > compiled default; env stays the bench-override path — it wins for the process lifetime). The GRBL driver is a thin client of the engine: it reports job state, enforces the published verdict in-process (fire gate, hold/resume, the compiled-duty emergency fallback), and touches no thermal hardware otherwise; the cloud client works the same way.

Bench record 2026-08-08 (hot-deployed binaries, all through the HTTP API): conf plumbing — cool_flow_rise=8 posted, next M8's healthy check read limit 8.0 → SUSPECT; key cleared mid-session, next M8 re-read 14.4 and the confirming pass cleared the suspicion (also proving episode continuity across M9/M8). Takeover — during a running verify: grblHAL process gone, marker present, settings POST 409, second start 409. flow-verify PASS in 2:42: flow 11.4 (dT 9.7) / threshold 14.4 / no-flow 17.6 (dT 12.8), margins +3.0 and +3.2; controller back (fresh pid), marker removed, heater 0, pump on after. Validation ranges live-checked (rise 0.5 → 400, pct 101 → 400, confirm 45 → 400). UI browser-verified mid-run: Diagnostics panel streaming phase/temps/log with the lock banner up, Machine tab Cooling card showing defaults as placeholders, inputs disabled. flow-calibrate COMPLETE in 8:45: flow band 11.6/12.0/12.0 (max 12.0), no-flow band 17.6/17.7/18.1 (min 17.6), gap 5.7 → recommended 14.8 — within 0.4 °C of the hand-derived 14.4 from the original 60-run matrix (the tool independently reproducing the ground-truth calibration). Result panel + Apply button browser-verified: the click wrote cool_flow_rise = 14.8 to the conf (cleared after; the compiled default stands until the operator chooses otherwise).

Units/identity/position panel rework (2026-08-08, later): OFFLINE-VERIFIED ONLY — board deploy + bump HELD during the operator's firmware-upgrade bench testing. Verified against the tools/mock.py harness in forgectrl (serves the ui.c panel with mock endpoints; POSTs logged): fuse-identity header (sample id), red unreferenced position (needed the .kv>span:first-child selector fix — the old descendant selector out-specified .b-bad on nested value spans), imperial placeholders 14.4→25.9 (delta) / 33→91.4 (absolute), position 12.34 mm→0.486 in, dirty-save posting exactly one changed key converted back (27 °F→15 °C), diag bands ×1.8 with Apply still posting metric, and a units round-trip leaving nothing dirty. The C serial→hostname derivation matches gfhardware id.py on 200k random 32-bit serials (host-side cross-check). Also offline-verified the same way: the fuse-identity viewer (GF Cloud tab, GET /fuse-identity fetched on demand only — serial, derived hostname, and the 64-hex SRK password with a keep-these-secret warning; modal outside the settings lock, both dismiss paths clear the values from the DOM). LIVE-VERIFIED 2026-08-08 after the firmware-testing hold lifted (both binaries hot-deployed onto the fresh 20260808171449 image, which already shipped the driver at the bumped pin): header reads the machine's real fuse identity — the C derivation confirmed against its known factory hostname — with gf_hostname/hostname gone from /settings; position shows 0,0,0 in red on the unhomed fresh boot and re-renders in inches on the live units toggle (placeholder 25.9, clean metric round-trip, conf key cleared after); /fuse-identity returns the real 8-digit serial + the derived hostname + a 64-hex password (verified by shape, not echoed), modal opens and clears on close; driver smoke: one M8 flow check verified 10.5/9.5 on the redeployed binary. forgectrl pin bumped to the panel rework revision.

Wireless regulatory + region setting (2026-08-08, later): the boot-time cfg80211: failed to load regulatory.db never was a missing file — packagegroup-base-wifi has always shipped regulatory.db(.p7s) + iw on both images. The cause: imx_v6_v7_defconfig builds cfg80211 IN (=y), so it requests the db at ~2.51 s, before VFS: Mounted root at ~2.62 s; the load fails (-2) and stays failed — a later iw reg set alone does NOT retry the file, only an explicit iw reg reload recovers it. Fixes shipped: glowforge.cfg flips CFG80211/MAC80211 to =m (they load with wlcore at ~5.5 s, well after mount, so the direct load succeeds — kills the message; in the kernel batch above, awaiting the next SD burn), and forgectrl gained wifi_country (System-tab Wireless card, full ISO 3166-1 alpha-2 dropdown, default 00 = world) applied via iw reg reload + iw reg set <cc> at daemon startup and on every change. LIVE-VERIFIED on the flashed 20260808171449 image (hot-deployed forgectrl): startup domain is the db-backed world regdom (it shows the 755–928 MHz S1G rules only the db carries), POST /settings?wifi_country=US flipped the kernel to country US: DFS-FCC, and clearing the key returned 00 and removed it from the conf. The release image still builds under the 200 MiB slot cap; an explicit wireless-regdb-static image entry was reverted as redundant (packagegroup-base-wifi covers it). Power save: the flashed kernel default is on (CFG80211_DEFAULT_PS=y), so the same forgectrl startup pass pins wlan0 power_save off (cold-boot verified off on the flashed image); the kernel batch flips the default off too. Quirk: hinting iw reg set 00 while the kernel is already in its default world domain makes cfg80211 intersect world-with-world and report the alias country 98 (identical rules, confusing label) — the startup pass therefore hints a region only when one is set, and hints 00 only to revert a live region change. Consequence, reboot-verified: with the db loaded and no user hint, cfg80211 follows the AP's 802.11d country IE (the bench AP advertises US — fresh boot came up country US: DFS-FCC with the setting unset; no country= in the supplicant conf, wl18xx does not self-hint), a user-set region overrides the IE (DE applied while associated to the US AP), and clearing reverts to the 00 hint. The UI labels the default accordingly ("Automatic — AP country, else World").

Release acceptance (forgetest, port 8090)

The release acceptance tool - the catalog, campaigns, domain fingerprints, inheritance, the always-required core, invalidate-all, the release gate, and the coverage currency rule - is specified in docs/ACCEPTANCE.md; the tool lives in forgetest/ and ships only on the dev image (forgetest recipe, /etc/init.d/forgetest, HTTP :8090). Status: code landed 2026-08-15, host-verified and build-verified; bench validation pending - ships with the next full image flash (the image manifest is an image change: forgefirm-manifest.bbclass entries from every component recipe, the kernel and the module through do_deploy, assembled by forgefirm-image-manifest.bbclass into /etc/forgefirm-manifest.json, also deployed next to the image as *.forgefirm-manifest.json). Build proof (dev image 20260815191634, built with the classes): the manifest carries all eight components (forgectrl, grblhal-glowforge with the core submodule's files, forgefirm-app merged from its three recipes, python3-gfhardware, python3-gfutilities, kernel-module-glowforge and linux-fslc through the deploy path, forgetest through the file mode), the DTB hashes and the modules directory, and layer content hashes that are byte-identical to what scripts/manifest-from-tree.py computes on the workstation - the identity is content-defined, independent of the checkout's commit or dirty state; forgetest is installed at S95 with the bench scripts. Host proof: 44 unit tests (campaign rules, fingerprints, artifact build + gate verification incl. the negative fixtures - tampered artifact, covered-file change, platform change, core inherited, stale invalidate, catalog change, implementation change - and the runner + HTTP API end to end with a fake catalog and a fake bench tool), the tree manifest generated from the recipe pins with scripts/manifest-from-tree.py (submodule recursion verified on the grblHAL core), the coverage lint reporting on it, and the gate refusing an empty artifact cleanly; .github/workflows/forgetest-ci.yml runs the same and enforces the coverage lint (every manifest path is covered: 0 uncovered on both the built manifest and the tree manifest). Catalog v1 is complete: 24 tests, every one a port of a proven bench drill or of a bench-verified check, with the recorded pass criteria: the core image.health, kernel.latch-locked-idle, kernel.k1-k2, kernel.k3-unlock, kernel.fire-abu (GATE A drills as takeover tests; K3 and fire B/U prompt for the lid when laser_pgood reports HV good) and laser.emission-witness (S400 square, emission peak -> 0, HV rise, M2 job-based disarm, operator confirms the mark); forgectrl.auth / settings-bounds / panel-serves, logs.tree-tail-export (sanitized bundle carries no panel token); motion.pacing, jog-roundtrip, liveness-probe, cancel-abort, deadman (SIGKILL / SIGSTOP->underrun / forgectrl restart mid-move, head returned by the kernel counters); cooling.flow-verify (through forgectrl's diag runner) and fans-quiet-after-motion; laser.disarm-in-hold, expected-stop (POST /controller/stop mid-burn, then the operator-judged restart), kill-mid-fire; camera.snapshot; update.slots-and-signature; cloud.mode-switch (gfcloud comes up and records its service probe) and cloud.gfhome-homing. Not in the catalog by design: the stale-origin refusal after an underrun (config-dependent - GRBL mode permits unhomed cutting, see the campaign notes above). The bench tab lists every scripts/bench tool; runnable from the page: check-pwm, pacing-test, bench-m2, bench-phase2, cp-watchdog, accel-fast, bump-seek, fire-test, gate-a-kernel, platform-drills, flow-confirm, flow-sampler (takeover tools get forgectrl stopped and started around the run); the scope tools, the host-side flow characterization tools, and the live drills stay ssh/host-run for now. The coverage currency rule is in CLAUDE.md "Working rules". Bench validation and the bench-tab ports are Next work item 15.

Hardware facts bank (measured)

• DRV8825 stepper drivers wedge on 40 V rail glitches (factory board; the TMC2130s belong to the upgraded OpenGlow board only). A glitch can leave the drivers unserviceable: SDMA playback and the position counters run normally while the motors produce nothing. Their reset lines are strapped (no kernel pin), cnc/faults does not flag the state, and whether a given rail power-up wedges them is chance — identical settle cycles produce different outcomes. Recovery: a longer true power-off (the forgectrl supervisor ladders 5/15/30 s) and, at worst, a full machine power cycle. Consequences: counters, anchors, and H:1 are never proof of motion; keep the rail up (every power-up is a wedge lottery), which is why the pulse-device broker exists and why there is no idle-rail-off policy.

• Motion liveness = the head accelerometer (glowforge.dts head-accel, i2c-3 @0x1e — resolve iio devices by bus path, never by index; lid = i2c-0 @0x1e, board = i2c-3 @0x1d). Bench-characterized on an identical commanded 30 mm move: wedged drivers ≤ ~210 counts peak-to-peak on X/Y (noise floor at 1 g ≈ 16384); real motion ≥ ~1000 p2p. The forgectrl liveness probe gates controller start on p2p ≥ 500 (dead ≤ 250); gfhome requires at least one accel-witnessed motion window before a quiet service counts as homed. Raw sysfs accel reads are slow (~150 ms each) — enough for a binary verdict over a multi-second window, not for waveforms (iio buffers exist, no trigger devices in this kernel).

• Any probe/liveness move goes RIGHT (+X) first, then back: a cable lives at the end of LEFT travel and must never be crushed.

• WL1805 Wi-Fi rides uSDHC1 (mmc0, 4-bit, SD-high-speed at 49.5 MHz, no-1-8-v; IRQ GPIO6_04, WLAN_EN GPIO5_26). Factory pad control, now ours too: CMD/DATA 0x17069, CLK 0x10069 (SPEED_MED, DSE 48 Ω, fast slew, HYS; 47 kΩ pull-up on CMD/DATA only). eMMC (uSDHC3) and the SD slot (uSDHC2) use 0x17059/0x10059 (80 Ω), SD2_DAT3 0x13059. An SDIO CRC error surfaces as sdio write failed (-84) and costs ~1 s of Wi-Fi (wlcore firmware recovery) — see Next work item 13.

• SDMA pulse engine: ring size = the ring_mb module parameter (default 16 MiB; power of two, must fit the 16 MiB cnc-pulsebuf DT pool; both were 128 MiB before 2026-08-03 — shrinking returned ~112 MB, board now shows 469 MB to Linux). Free = size − 32 KiB gap. Bench-verified at 16 MiB on the flashed image: 20 MB streamed at 100 kHz through the wrapping ring, 0 ENOMEM, 0.4 ms max write latency, starve → underrun per protocol; $H and jogs clamped 0. The ring caps legacy cloud-mode job length (whole-file preload: ~1 MiB per 100 s of 10 kHz stream); the grblHAL live feed keeps only a few KB in flight. Script effective ceiling ~165 kHz; position counters (sdma_context sc0/1/2 = X/Y/Z steps, sc3 = bytes) match grblHAL exactly.

• Byte layout & rules: see the UAPI.md feeder contract (authoritative).

• Z: bit 6 SET = lens UP = +Z (hardware-verified; pulsedata.py was the inverted party, fixed). Home = hall trigger at TOP; usable travel ≈ 30 half-steps ≈ 10.6 mm ≈ 0.417"; 0.3534 mm/half-step. Never blind-drive Z — hall-supervised only.

• XY: 0.15 mm per full step; DIR bit set = −X / +Y (Y1/Y2 complementary). +Y physically moves the gantry toward the FRONT (operator-verified 2026-08-03). Home corner (convention, for the planned limit-switch homing) = back-left (X min, Y min), workspace all-positive from that corner.

• Factory motion profile (measured from _RESOURCES pulse streams with puls_profile.py): accel ≈ 700 mm/s² X / 590 mm/s² Y on v2.6.0 firmware (2018 firmware used ≈1000); header HAxr=132/HAyr=112/HAar=133 ⇒ ≈5.3 mm/s² per HA unit. Travel moves peak 202 mm/s vector (≈ 8 in/s) at STfr=28160 Hz; prints/hunts run STfr=10000. Cut feed in the sample print: 145 mm/s. Z cadence ≈ 61–115 ms per half-step (≈ 5.7 mm/s max).

• Factory analog config (constant across all captured jobs, 2018→2026): PIC currents X 135 run / 33 hold, Y 22 run / 5 hold (axis DAC scales differ by design); x/y_decay=1; ×8 microstepping; run currents applied only while motion plays, hold otherwise.

• Laser PWM: 39.98 kHz register-verified (divider 13 × 127 counts).

• Switches: truthy = closed/OK for lid/doors/button. SW_INTERLOCK is INVERTED: the remote interlock (the regulatory 2-pin lockout connector) reads ACTIVE only when the loop is OPEN. Basic/Plus — including the bench machine — ship the connector factory-jumpered, so the bit reads 0 = satisfied/good-to-go; Pro brings it out for an external lockout chain. Must NOT gate motion (beam is hardware-gated). hv_enable (EV_SW bit 4, GPIO4_06) is the readback of the safety chain's HV_ENABLE output through the U24 inverter — not an input. Active for the whole duration of any run (the window in which the charge pump is fed and HV_ENABLE is alive), inactive at idle, and it drops 454 ± 3 ms after the last charge-pump pulse (one-shot t_w measured pulse-to-drop 2026-08-15 with scripts/bench/cp_watchdog_timing.py: 451.8 / 455.6 ms; feed period 199.98 ms; the pad-level jog characterization dates from 2026-08-07, sampled at 20 ms through X and Z jogs, ~70/75 samples). It gates nothing anywhere — it is telemetry (/status switches.hv_enable, control-panel "HV enable"). Naming note: the factory design labels this net E-STOP, and dated entries below written before the rename (through the earlier 2026-08-15 records) call it estop/SW_ESTOP with the pre-rename polarity (the device tree then declared the pin active-high, so the bit read HIGH at idle and LOW through a run — the same physical behavior, inverted); the DTS now declares it active-low so the bit reads as HV_ENABLE itself. The former estop_halts_motion / MOTION.ESTOP_HALTS_MOTION opt-in (gate motion on this line, for a hypothetical retrofit) is removed: it only ever made sense while the line was misread as an e-stop input, and a real e-stop belongs in the lid-switch chain (docs/SAFETY.md). Doors/door1/door2 stay stable during motion.

• Machine identity from OCOTP nvmem: HW_OCOTP_MAC0 is the serial, base-23-encoded to the factory hostname — fuse-verified on the bench against the factory label. The bench machine's actual values are deliberately not recorded here: this is a public document and a fuse identity cannot be rotated.

eMMC boot & recovery architecture (dumped from the bench board 2026-08-08)

• eMMC (mmcblk2): 3.6 GiB user area + two 16 MiB hardware boot partitions (mmcblk2boot0/1). Factory user-area MBR (per the factory .fw manifest): p1/p2 = 200 MiB rootfs A/B at blocks 8192/417792, p3 = /data from block 827392 to end of disk. (The bench board runs the legacy ForgeFIRM layout instead: p3 shrunk to ~1.9 GiB plus a 1.3 GiB p4.)
• U-Boot lives in boot0 at 1 KiB (IMX IVT header), not in the user area — user-area block 2 reads blank on the bench board even though the .fw complete task writes a U-Boot copy there. Any boot0 rewrite below 0xC0000 risks the bootloader.
• Saved env: user area 0x80000 with redundant copy at 0x82000 (the area ffboot/fw_setenv targets; boot0's own 0x80000 region is zeros). Slot selection = mmcdev/mmchwpart/mmcpart/mmcroot; bench board reads mmcdev=0 mmchwpart=0 mmcpart=1 mmcroot=/dev/mmcblk1p1 (SD boot). Gap: ffboot sets three of the four but never mmchwpart — it relies on the saved 0.
• Default (compiled-in) env boots recovery: mmcdev=1 mmchwpart=1 boot_recovery=yes — a blank/corrupt env lands in recovery mode, not a brick. bootcmd: select mmc dev+hwpart → load+import /boot/uEnv.txt from the selected partition → if boot_recovery=yes, boot kernel+DTB from raw boot0 sectors, else load /boot/zImage from the slot's rootfs. U-Boot itself polls the button at power-on ("Recovery boot requested by user; release button to enter" / "Button held too long, booting normally"); it also has watchdog-timeout boot-flag strings (semantics untraced).
• boot0 map: MBR / U-Boot @1 KiB / zeros @0x80000 / recovery DTB @0xC0000 (fdt_dev_addr=0x600, 64 KiB slot) / recovery zImage @0x100000 (image_dev_addr=0x800, 5 MiB slot, kernel 3.14.28) / recovery squashfs = boot0p1 @6 MiB (10 MiB slot, 8.6 MiB used, built 2018-03-09).
• boot1 map: MBR / squashfs @1 KiB = boot1p1 (10.6 MiB used), mounted as the recovery /usr (python runtime) by init.d/recovery-usr.
• Recovery userspace = the factory setup webapp (bottle): WiFi setup/AP, log export, /version, and .fw upload (→ tmpfs → glowforge-updater -f → fwup signature check against /glowforge/pubkeys → writes slot A → flips env). It is never updated in the field — .fw updates don't touch the boot partitions, so every machine still runs its as-manufactured recovery.
• Bench slot contents (probed 2026-08-08, ffboot -l): eMMC slot 1 = factory 20240612194245 (the machine's last cloud update, June 2024 — the newer slot and the factory-archive candidate), slot 2 = factory 20220810204015, legacy p4 = ForgeFIRM v0.1.0 (written during the Phase 0 slot-agnostic test). Factory /etc/version is a numeric datetime stamp — newest-slot selection is integer comparison.
• Factory .fw format = signed fwup 0.14.2 archive (ZIP: meta.conf + meta.conf.ed25519 + payloads). Tasks: complete (MBR, U-Boot to user area, zero both env copies, rootfs → slot A, zero p2/p3 heads) and upgrade.a/upgrade.b (raw-write rootfs.ext4 into a slot). Factory updater flow: authenticated GET <server>/update/current → {version, download_url} → resumable download to /data/glowforge.fw → verify → apply to the INACTIVE slot → fw_setenv mmcpart mmcroot → reboot. Factory rootfs.ext4 is 65 MiB; the ForgeFIRM rootfs is ~141 MB used, so it fits a 200 MiB slot with headroom.

Next work (in rough order)

1. Backend milestone 2 — motion quality: DONE and human-verified 2026-08-02. Operator confirmed motion is "butter smooth" (and near silent) on a full observation run — slow/fast/diagonal/zigzag jogs at up to 200 mm/s under grblHAL-glowforge with the factory-true analog config. The pre-tuning loudness was the 150/150 currents + unset decay mode. Milestone closed.

2. Laser mapping (gated on the scope session): spindle → power bytes (bit 7) + bit 4 laser-enable, M3/M4/$32 semantics, PWM-reset rule per the contract. No live fire before the standing scope gates. Gate status:

   • GRBL-MODE LASER SOFTWARE: IMPLEMENTED 2026-08-09, bench-verified without fire. FIRST LIGHT LANDED 2026-08-11 — first GRBL-mode burn completed (operator-run LightBurn job, chain armed, motor-rail settle in place).

     • Architecture: the real spindle lives in grblHAL-glowforge/src/glowforge_laser.c; per-segment spindle updates (the core's laser-mode path, running on the stepper producer thread at exact virtual-tick positions) map power/fire transitions onto the pulse-byte grid via gf_stream_laser(), and the shipper emits them: a power byte (0x80 | 7-bit duty, raw PWMSAR counts, 127 = 100 %) inserted ahead of the first tick byte it covers, FIRE as bit 4 OR'd into tick bytes. The spindle PWM is precomputed to a period of exactly 127 so computed values ARE power bytes ($30 default 1000 → S1000 = 127). Contract rules enforced structurally: a power byte leads every kernel run before any fire bit (run start resets duty to ~100 %), transitions are coalesced per tick so power bytes are never consecutive, and power bytes cost no machine tick (the SDMA script processes the following byte in the same EPIT interrupt), leaving the wall-clock due math untouched. Fire only ever rides motion segments of laser blocks - jogs, G0 and homing are fire-free by construction, and the end-of-data backstop covers every stream end.
     • Arming - the operator's button press is required. The first laser-on of a job (M3/M4, always planner-synced by the core) refuses outright if a coolant fire gate stands, else forces the run fan profile on, unlocks the kernel laser latch, lights the button white and blocks the gcode stream - pumping real-time traffic exactly like the homing session - until the operator presses the physical button (EV_SW bit 2), a soft reset aborts, or laser_button_timeout_s (default 300 s) expires into alarm 3. The armed window survives S changes and M5/M3 toggles (no re-prompt mid-job) and closes - relocking the latch - after laser_disarm_s (default 60 s) of spindle-off idle, or immediately on alarm/homing/reset/stream fault. Both keys live in the shared machine config, re-read per arm.
     • Underrun policy while armed: fail safe, no retry. The stop/run recovery restarts the kernel run, which resets the duty to ~100 % - replaying queued fire bits would fire at full power - so an armed underrun acks the kernel and faults (alarm, latch relock). Motion-only streams keep the one-shot retry.
     • Coolant fire gates live (gfcool_fire_ok): flow FAULT or over-ceiling coolant temperature (resume-gate hysteresis) blocks arming and suppresses fire mid-job with a loud warning. While armed the run fan profile + flow interrogation are forced on regardless of the sender's M8/M9; a flow SUSPECT/FAULT verdict inside an armed window takes the safe posture (feed hold + run airflow; laser mode drops the spindle in hold). SUSPECT auto-resumes on a clean re-check; FAULT leaves the hold and the gate for the operator.
     • Host verification (scripts/bench/laser_stream_test.py, null-sink + GFSINK_DUMP stream capture, M4 job S500→S1000 with a G0 return): power byte leads the stream, no consecutive power bytes, first FIRE bit rides nonzero duty, M4 dynamic accel scaling visible (duties 44/52 on the ramp), S500 plateau 63 / S1000 127 exact, 28 354 fire ticks = the cutting time at 28160 Hz, X peak 533 steps net 0 (steps survive the insertions), and 534 dark steps after the last fire bit = the entire G0 return.
     • On-board no-fire verification 15/15 PASS (chain unarmed, nobody at the button; the drill script was a bench one-off and is not retained — the arm-window state machine is reproduced host-side by scripts/bench/laser_lifecycle_test.py and grblHAL's tests/laser_arm_test.c, and the latch readbacks on hardware by gate_a_kernel_drills.py and live_fire_drills.py): latch locked at idle and through jogs (interlock_circuit 13), M4 → prompt + latch unlocked (5) + button LED white + run fans forced + status served during the wait, soft-reset abort relocks + LED off, 3 s timeout drill → warning + ALARM:3 + relock, jogs clean after. One transient on the first-ever arm: the air-assist run write didn't land (204) - a head-I²C first-write blip; deterministic PASS on every rerun, and real jobs re-apply run fans with every M8. Note for senders: a disconnecting sender leaves a pending arm wait until the button timeout clears it (latch relocks then).
     • Remaining commissioning items (first light itself landed 2026-08-11; operator present, coolant flowing, never autonomous): verify the hardware button latch persists across kernel-run gaps mid-job (if OK_2_FIRE drops between motion bursts, the fix is a stream keepalive across armed gaps); warm-baseline flow-check behavior under real laser heating; then the planned low-temperature gates and TEC handling below. Interlock-trip recovery came out of this list on 2026-08-12 — exercised in commissioning runs (see the readback cross-check below).
     • 2026-08-11: the failed first-light attempts' no-motion root cause — fast 40 V motor-rail bounces — found and mitigated. An off→on bounce of the 40 V rail within ~tens to hundreds of ms (the gfhome→grbl homing handover measured 38–360 ms in dmesg) can leave the supply folded back: SDMA playback and the position/byte counters run in exact real time while the X/Y motors produce no torque, or stall mid-sweep. Bench matrix: raw replay of the captured job stream (bytes verified to carry correct steps/fire/power content) reproduced no-motion with perfect counters; disable → ≥2 s rail-off → clear_all (lseek 0) → enable restores torque; a deliberate 40 ms bounce reproduced a mid-sweep stall; one post-heal baseline still failed — the rail is marginal at the hardware level; watch it. Exonerated by bisection (Z-hall stream probes + operator-observed 20 mm X sweeps): stream content, kernel module and SDMA context, the granular lseek clears, analog config values, PIC currents, close/reopen, stop, halt. Driver mitigation (grblHAL-glowforge b7264bf): every takeover of the pulse device (init and homing-session resume) starts with a deliberate rail-off settle, conf key rail_settle_s (default 2.5 s, 0 disables). SAFETY COROLLARY: advancing position counters are NOT proof of physical motion — an armed job can fire with the gantry stalled (dwell burn). The laser milestone needs a physical motion-liveness gate (limit switches when they land, or the head accelerometer); until then the first-light procedure is: operator watches from the first commanded move and stops the job on any no-motion.
     • 2026-08-11 (later, same day): root cause corrected and the liveness gate landed. The supply is fine — the DRV8825 stepper drivers wedge on rail glitches (operator diagnosis; see the hardware facts bank): whether a given power-up leaves them unserviceable is chance, which is why one clean-settle baseline still failed. The mitigation stack is now: the pulse-device broker (the rail never cycles on handovers), the supervisor's head-accelerometer liveness probe before each session's first controller spawn (+X-first per the cable rule, laser latched; rail-off recovery ladder 5/15/30 s on a dead verdict; motion-fault state when the drivers won't recover), and gfhome's hardened completion (a run of near-identical cloud corrections aborts the session; quiet without an accel-witnessed motion window is a failure, not a homing — proven the hard way when the service repeated one correction eleven times into a motionless gantry, gave up, and the old quiet heuristic reported homed). A genuine accel-witnessed homing (8 motion windows, head at the corner, operator-confirmed) closed the episode.

   • LASER_PWM waveform: PASSED 2026-08-02 (scope on the physical pin). Method: direct PWMSAR duty steps (scripts/bench/pwm_sweep.py / pwm_hold.py) with the controller stopped, cnc disabled (steppers unpowered), laser latch locked, lid closed; laser_on_sampled stayed 0 throughout. Measured: 25.0 µs period / 40 kHz at every duty; 50/25/75 % confirmed visually; low end cursor-measured 6.4 % vs 6.3 % commanded (PWMSAR=8) — clean pulse, no runts, carrier stable across the full range. Matches the register-level audit numbers (divider 13 × 127 counts, 39.98 kHz).

   • Stream-path power bytes: PASSED 2026-08-02 (scope on LASER_PWM, scripts/bench/pwm_stream_test.py: power-bytes-only program preloaded and played by the pulse engine; steppers energized but motor_lock=15 + zero step bits — position counters pinned at 0). Operator observed the full staircase AND both contract rules on the pin: run-start duty reset to 100% (first pulses would fire at full power unless the stream's first power byte precedes its first FIRE bit) and consecutive power bytes dropped (saw 25 % where a 75 % byte rode directly behind; 75 % applied only after a spacer). Also measured: duty persists after end-of-data (PWMSAR retains the last value; the end-of-data backstop forces FIRE/step lines low, not the power setpoint) — the laser-off guarantee rests entirely on FIRE.

   • Laser latch + safety-chain gating: scope-verified 2026-08-02 (scripts/bench/fire_test.py, probe on the PSU-connector LASER_ON pin; power byte 0 throughout, zero step bytes, HV unpowered, operator at the power switch; phase B latch-unlock executed by the operator). Phase A (latch LOCKED): 40,000 streamed FIRE bits → pin dead flat AND kernel laser_enable stayed 0 — the latch severs the FIRE drive entirely. Phase B (latch unlocked, chain unarmed): kernel laser_enable=1 mid-window, but the PSU pin stayed flat and laser_on/laser_on_sampled stayed 0 — the factory board gates LASER_ON behind OK_2_FIRE exactly like the OpenGlow AND design (FIRE ∧ OK_2_FIRE, active high at the PSU pin). Interlock snapshot semantics pinned by experiment (13→7 during the unlocked FIRE window): b0 = SoC-side LASER_ON monitor, active LOW (1 = not lasing); b1 = FIRE, active high; b3 = latch, 1 = locked/0 = unlocked.

   • ≤1-tick FIRE drop at underrun/end-of-data: PASSED 2026-08-02 (scope on GPIO2_IO30, the SoC FIRE drive feeding the safing logic; fire_test.py B and U, operator-executed, duty 0, chain unarmed). Stream: two 2.000 s FIRE windows, the second ending exactly at end-of-data so its falling edge IS the SDMA backstop. Measured: both pulses 2.0000 s exactly, clean edges, on BOTH termination paths — normal completion (streaming=0) and true underrun (streaming=1, kernel underrun state reached and acked). The backstop drops FIRE within one tick (≤100 µs at 10 kHz) regardless of how the stream dies. Signal naming (per the OpenGlow LASER SAFING sheet, confirmed to match the factory board): FIRE = per-tick request (kernel laser_enable, GPIO2_IO30); OK_2_FIRE = chain verdict; LASER_ON = FIRE∧OK_2_FIRE to the PSU; HV_EN = HV enable, safing-driven only.

   • ALL STANDING SCOPE GATES ARE NOW PASSED. Live fire remains gated on the laser-milestone software itself (power-byte + FIRE emission in the stream engine with power-before-fire ordering, HV_WDOG retriggering only while genuinely cutting, M3/M4/$32 mapping) plus a chain-armed first-light procedure; the hardware verification prerequisites are complete. Interlock-trip recovery (the one non-scope check that was left) was exercised in commissioning runs and closed 2026-08-12.

   • Fan/thermal control (operator-mandated laser-on prerequisite): DONE 2026-08-02, bench-verified (test scripts/bench/fan_test.py). The policy described in this and the following bullets is the cooling engine's; it is now forgectrl cool.c, serving both controller modes, and the GFCOOL_* env names carry over as bench overrides (the conf keys are the cool_* ones — see the cooling-tunables note in the forgectrl section). Factory pulse-header values throughout: init = pump on / TEC off / purge on / idle fans (air assist 204); M8 (coolant flood — LightBurn's per-layer Air Assist) = cut profile (air 1023, exhaust 65535, intake 43278); M9 = 15 s cooldown (GFCOOL_COOLDOWN_S) then idle. Water temp polled at 1 Hz vs the ~31 °C factory run ceiling → one-shot controller warning (laser milestone upgrades it to a hard fire gate). Verified via tach readbacks: air tach period 4439→699 under M8, exhaust stopped→full, intakes ~3×, cooldown hold, clean return to idle; coolant temp visibly dropped during the blast. Absolute ceiling 33 °C (job-header CMrx).

     Coolant temperature conversion CORRECTED 2026-08-02 — the UAPI "best guess" raw*-0.09653+94 was wrong (3–5 °C high, wrong slope); the real one is the factory B-equation recovered from the v2.6.0 binary (10 k B3380 NTC, 10 k divider, ×1.3 gain, 10-bit ADC), proven by reproducing this machine's WT* cloud settings exactly, and thermometer-checked to ~1 °C. Full derivation now in kernel-module-glowforge/UAPI.md. Consequence: the 33 °C ceiling had been firing at a real ~29 °C, and anything derived from the old formula had to be re-derived — which is how the flow check below got rebuilt.

     Coolant flow verification — REBUILT ON A 60-RUN DESIGN MATRIX (2026-08-02 overnight). Everything below supersedes the earlier ΔT-based designs; the tools are scripts/bench/flow_matrix.py (+flow_sampler.py on the board), flow_sustained.py, flow_warm_validate.py, flow_recheck_char.py.

     • Duty is the decisive parameter. Below ~40 % the stagnant loop sheds the heater's output by natural convection well enough to mimic flow: at 30 %/50 s the five pump-stopped trials read 8.15, 8.69, 8.78, 12.25, 13.33 °C while flow never exceeded 9.08 — three of five dead-pump cases looked healthier than a working pump. At 40 % heat input outruns convection (flow ≤11.46, no-flow ≥16.04, d′ 8.4) and it is also the cheapest viable option (~0.8 °C of loop heating per check vs ~2.0 °C at 50 %).
     • Operating point: 40 % duty, 50 s window, threshold 14.4 °C (balanced midpoint of 17 flow observations peaking at 12.75 and 8 no-flow observations bottoming at 16.04).
     • Periodic re-checks every 150 s (GFCOOL_RECHECK_S), because a stopped pump is undetectable any other way — absolute temperature only tracks a circulating loop, and "coolant should warm while cutting" is ambiguous (a light engrave may add no measurable heat). Sustained 40-minute run: zero false faults, and no thermal accumulation — with cut-profile fans the loop cooled 2 °C while being interrogated throughout.
     • Settle gate (safety-critical). The check measures a rise from a baseline; capturing that baseline while the loop is still cooling from earlier heat produces garbage and was bench-proven to miss (reported flow with the pump stopped). Checks are now requested, and start only once the sensors agree and the downstream reading is stationary. Stationarity uses a split-half mean difference, not peak-to-peak: measured noise on a settled loop is 0.52 °C p-p (0.70 worst) but only 0.11 °C split-half (0.21 worst), so any p-p threshold tight enough to catch drift sits below the noise floor and the gate never opens.
     • Record: 25/25 correct classifications at 40 %, plus all three settle cases (settled/flow, settled/no-flow, and the unsettled no-flow case that previously missed → now defers, then faults).
     • NOT YET VALIDATED (first-light commissioning items): all baselines were 19–23 °C (an overnight-cool room; the loop equilibrates near ambient and the heater cannot reach a cutting-session loop temperature — 100 % duty drives the downstream sensor past 50 °C in 30 s while the bulk barely moves). Behavior at 27–32 °C baselines, and under real laser heating, must be characterized at first light. Physics argues the dependence is weak — with forced flow ΔT = P/(ṁ·c), which carries no absolute-temperature term — but that is reasoning, not measurement.
     • TRIAGE RESOLVED 2026-08-08 — the 2026-08-03 faults were a REAL transient stagnation, not false positives; loop trusted again. The log lines (pass rise 11.4, then FAULT 16.5 / 15.9, dT 11.6) postdate the warm-baseline validation session: flow_warm_validate.py's controller restart truncates /data/glowforge.log (single >), so they were written by a driver M8 session after 23:21 on 2026-08-02 — right after a bench session that stopped/started the pump 8+ times with ~50 °C heater excursions (classic airlock conditions). Signature analysis against the design matrix: the fault rises sit at the characterized no-flow floor (16.04), and the establish-window dT 11.6 sits in the no-flow band (driver- equivalent dT-mean from the matrix: no-flow 11.9–13.2 vs flow 9.8–10.2) — the checks correctly read stagnant/near-stagnant water at that moment. Probable cause: transient pump airlock from the bench session's pump cycling, self-cleared (the preceding 11.4 pass shows flow was fine minutes earlier). Re-verified 2026-08-08 through the production path (M8 on the flashed v0.1.0 image, pump operator-confirmed, 22 °C settled loop): rise 11.3 dT 9.5, and after an M9→M8 layer-cycle, rise 10.8 dT 9.3 — textbook flow-band values. Also measured: no recirculating heat slug — each check's heat is fully shed within ~60 s (two checks left the loop 0.4 °C net cooler), and fan-profile transitions inject brief ~1.7 °C COLD slugs from the radiator (~20 s), showing the loop circulates in tens of seconds. Operational lesson: expect a possible legitimate flow SUSPECT on the first checks after manual pump stop/start cycling — the confirmation machinery below absorbs it.
     • Suspicion/confirmation state machine — IMPLEMENTED 2026-08-08, bench-drilled 6/6 + escalation (now in the forgectrl engine). An over-limit check is a SUSPICION, not a fault: COOLANT FLOW SUSPECT warning + an immediate re-check request (no cadence wait). The next completed check decides it — "consecutive" means no clean check in between, whatever the wall-clock gap: over-limit again → COOLANT FLOW FAULT; clean → coolant flow suspicion cleared, episode counted (3 cleared episodes in one job earn an aggregated check-your-coolant warning; counter resets when cooldown reaches idle). A suspicion that cannot produce any verdict within GFCOOL_CONFIRM_MAX_S (default 480 s; budget restarts per flood session, runs only in Cool_Run) escalates to FAULT — a loop that will not settle after a fault-level reading has shown no evidence of health. A clean check from the FAULT state logs coolant flow recovered. Laser milestone: safe posture (hold + laser off + forced cooling) moves to the SUSPECT edge; FAULT stays the hard fire gate. Every threshold in this machinery is a cool_* conf key since 2026-08-08 (forgectrl Machine tab, re-read per flood start; verification/calibration tools in the Diagnostics section). Bench drill (scripts/bench/flow_confirm_drill.py, on-board, real pump-off transients through the production path, single M8 session): verified 11.6/9.4 → pump off SUSPECT 16.4/12.0 → pump on cleared 11.9/9.5 in 92 s (the 2026-08-03 field case, now non-fatal) → pump off SUSPECT 18.5 → still-off confirmed FAULT 16.1 just 109 s after the suspect → pump on recovered 11.1/9.4. All six verdicts in order, 6/6. Escalation drilled separately (flow_escalate_drill.py with GFCOOL_CONFIRM_MAX_S=45): suspect → starved settle → "no clean re-check within 45 s" FAULT.

     (Superseded earlier text kept below for context.) Coolant flow verification (first attempt, live-verified both ways). Continuous 10 % heating was never viable on the corrected curve: flow ΔT ≤3.69 vs no-flow ΔT ≥3.74 — a 0.04 °C gap against ~0.9 °C of sensor noise. At 30 % the ΔT bands separate (≤9.32 / ≥10.99) but a ΔT threshold still failed a live pump-off drill (8.8 °C vs a 10.2 °C limit), because a check starting from a cold heater never reaches the steady-state delta. Final design: a one-shot check at job start (M8) — heater to 30 % for 50 s — with the discriminator being downstream temperature RISE (flow ≈10.3 °C vs no-flow ≈15.1 °C, ~6 °C separation; threshold 12.7 °C, GFCOOL_FLOW_RISE). Heater goes off afterwards, so the loop is not warmed for the rest of the job, and absolute over-temp monitoring carries protection from there (a pump failure mid-cut shows as a temperature climb far faster than any heater delta). Verified twice each way from a cooled loop. v2 (same day): heater job-scoped (M8..M9 only — an always-on heater eats headroom below the 31 °C start gate at idle; flow faulting arms 30 s after heater-on), two-phase cooldown (15 s smoke clear at run duty, then half-duty airflow until the upstream temp is under the 31 °C resume gate or GFCOOL_COOLDOWN_MAX_S), and factory-style over-temp pause using the factory coolant windows (run ceiling 33 °C / resume 31 °C, env-adjustable: GFCOOL_TEMP_MAX/GFCOOL_TEMP_RESUME): a CYCLE over the ceiling gets a feed hold + forced cooling airflow + auto-resume on recovery; a JOG gets a jog-cancel (grblHAL refuses HOLD from the jog state by design). Senders see the Hold state and [MSG:Warning:…] lines. Drilled live with test limits: jog canceled mid-move, cycle held and auto-resumed, fan profiles restored on stand-down. TEC control remains for the laser milestone; these warnings/holds become hard fire gates there.

   • Low-temperature gates + warm-up: PLANNED (laser-milestone scope, operator-directed 2026-08-08). The factory has a low side we do not implement yet, on two layers: the firmware coolant-window FLOORS (this machine's settings dump: CMrn/CMwn 1017 mdeg ≈ 1.0 °C, CMin 4008 ≈ 4.0 °C — freeze/hardware protection) and the user-facing ~16 °C / 60 °F operating floor, enforced as the factory's "warming up" pause: the machine holds the job and warms the coolant with the loop heater until in range (the cloud CF* heater-PID keys are that mechanism — setpoint/Kp/Ki, zeroed on this unit; the OpenGlow stack uses a static 10 %). Plan: two more keys in the Cooling card — cool_temp_min (hard floor, default ~5 °C; becomes a fire gate) and cool_temp_start (warm-up gate, default ~16 °C): a job starting below the gate holds in a factory-style warm-up phase (loop heater on, senders see the Hold + a warming message) and releases above it; below the floor nothing fires at all. Rationale: cold-tube thermal shock, condensation when the TEC pulls below the dew point, frozen coolant. Sequencing with the flow check: warm-up first, flow check after (a warm-up that raises the bulk temperature is itself circulation evidence). Measured physics for the phase (this bench): 50 % duty warms the bulk ~0.5-0.8 °C/min and plateaus ~8-9 °C above ambient — the same unaided limit the factory has (a cold garage may never reach the gate; that is honest, not a bug).

   • TEC handling: PLANNED (laser-milestone scope, operator-directed 2026-08-08). The control board is common to Basic/Plus/Pro; per Glowforge's published specs the TEC ships on the Pro (Basic/Plus: same passive closed-loop cooling, 60-75 °F operating window; Pro: "solid-state thermoelectric cooler", 60-81 °F — owners-forum consensus matches), but that is a spec-level claim, not teardown-verified per unit, and rebuilt/revision units may vary. Moot for the design either way: thermal/tec_on is a bare on/off output with NO readback — presence cannot be detected — so it is a user setting: tec_present (Machine tab, default off; ForgeFIRM never drives tec_on unless set). The setting also covers retrofits. Operation when present: the factory regulates coolant toward its ~18 °C setpoints (CMet/CMdt 18134/18364 mdeg — the same WTub/WTvb raw-754/751 pair that proved the thermistor curve); plan is a simple hysteresis while a job runs — TEC on above cool_tec_on_c, off below cool_tec_off_c, defaults from the factory setpoints, off at idle (factory init state) — with cool_temp_min as the chill floor so the TEC can never drive the loop toward condensation/ freeze territory. Exact policy (and whether the /status panel shows TEC as absent vs off) lands with the implementation.

   • Interlock readback semantics cross-check: CLOSED 2026-08-12. The full interlock_circuit bitmask is mapped: b0 (SoC-side LASER_ON monitor, active low), b1 (FIRE, active high) and b3 (latch, 1 = locked) were pinned by the 2026-08-02 scope experiment recorded in the gate section above; b2 (button latch) and b4 (interlock latch reset) come from the factory decode the attrs were ported from. The armed kill-mid-FIRE drills exercised the mask across armed, firing, idle and disarmed states with consistent readings, and interlock-trip recovery is confirmed from commissioning runs. Attribute semantics are documented in kernel-module-glowforge/UAPI.md; note cnc/laser_latch is write-only, so lock state is read from interlock_circuit b3.

   • Head-IRQ source validation — beam-emission hypothesis: OPEN (exploratory feature; NOT a first-light prerequisite). The EV_SW head bit (GPIO3_22, factory pad name HEAD_IRQ; the panel's "Head sense" row) is the head MCU's attention line — idle LOW with a healthy head attached (measured 2026-08-08); it pulses on head reboot (hence the 60 ms DT debounce) and floats to the SoC pull-up with no head driving it, so the raw level is NOT a presence signal (presence = the head answering at I²C 0x47). The factory app answers this IRQ by reading the head's interrupt flags over I²C, and the only flag register is the reg 0x05 RO group — bit0 hall_sensor, bit1 accel_irq, bit2 beam_detect_digital (head_private.h) — so there are exactly three candidate IRQ sources; working hypothesis (operator): the in-cut source is the head's IR beam-emission detector — digital flag 0x05 b2 + analog level reg 0x16 (both already head sysfs attrs), tunable detection model at regs 0x22–0x2a (lambda_k/lambda_t/theta_r/theta_t/e_t = the factory BDlk/BDlt/BDtr/BDtt/BDet settings; regs defined in head_private.h, not yet exposed as attrs). Priority/scope (operator, 2026-08-08): later exploration, not a must-have —

     • The bench head is gen2 (a first-round Kickstarter unit already shipped gen2). Gen1 heads are presumed rare to nonexistent in the wild, though the factory images still support them, so some must be assumed to exist. The gen1 board-level beam chain (!BEAM_DET GPIO4_15, !BEAM_DET_XOR GPIO4_08, !BEAM_DET_TIMEOUT GPIO4_07, BEAM_DET_ERR GPIO4_10 — DT-pinmuxed, not driver-requested; BEAM_DET_LATCH_RST GPIO7_13 pulsed at cut start, boards v13/v14 only) is documented here as legacy reference only.
     • Whether the factory actually USES beam detect is unknown. The v2.6.0 factory app carries a complete but config-gated subsystem (separate printing/idle enables, severities failing-abort / pausing-alert / silent-alert, level-vs-edge trigger option, beam_detect_irq + irq_override, fault report upload; an invalid severity defaults to DISABLED), so the plumbing exists but production enablement is an open question. Detection at low fire energies is also unverified — the sensor may simply not trip on a low-power pulse.
     • Same status for the accelerometer: a promo-touted factory feature that was not active in early releases and may not be today. Its data path is direct (lis2hh12 on the I²C bus) but its INT pin routes to the head MCU as flag 0x05 b1, so it is also a head-IRQ source. Cheap opportunistic check during live-fire bring-up (no gating): log EV_SW head-bit edges + head/beam_detect_digital/_analog while firing — if the beam flag level-holds the IRQ, the panel row asserts during sustained emission. Later-feature decisions if it pans out: beam-absent-while-FIRE as an optional fault input, attrs for the calibration regs, panel row relabel (e.g. "Head IRQ / emission").

3. Homing: runtime-selectable, Glowforge web-service mode IMPLEMENTED and bench-verified (stub session) 2026-08-07; LIVE cloud run still pending operator. The operator picks the method in the forgectrl web UI (homing_mode in /data/forgefirm.conf, REST GET/POST /settings): gfcloud = factory camera homing via the Glowforge web service, switches = the future limit-switch cycle (falls through to the core, still disabled $22=0), none = $H rejects error 5. The driver re-reads the file on every $H.

   • Architecture: glowforge_homing.c registers a driver $H that shadows the core's; for gfcloud it suspends the stream engine (only from a fully idle kernel — closing the flock'd fd mid-program is an e-stop), spawns /usr/sbin/gfhome.py (new gfhome recipe; config /data/etc/gfhome.conf, first-run copy from /etc/gfhome.conf.sample), pumps the protocol so senders keep getting status, then reacquires the device and re-applies the analog config + step_freq. ^X aborts the session (SIGTERM → SIGKILL); failure/timeout queues ALARM:18 like a failed core cycle (gfcloud_home_timeout_s, default 300).
   • The runner drives the GFUIService dispatch itself (the stock run() loop can neither stop nor close the socket) and treats hunt + ≥1 motion + quiet (10 s) as complete — the modern v2.6.0 sequence per _RESOURCES/emulator.log is settings → hunt → lid_image → single corner move → lid_image → silence. It then re-homes the lens against the hall for a deterministic Z.
   • Position semantics: factory home = machine origin (back-left corner, +Y = FRONT, workspace all-positive 0..495 × 0..279); Z top-of-travel = 10.6. gfcloud_home_x/y/z in /data/forgefirm.conf calibrate the post-home coordinates once measured (defaults 0 / 0 / Z max).
   • Bench record 2026-08-07: forgectrl /settings verified on the board; $H mode dispatch verified (none → error 5); a stub gfcloud session (gfcloud_home_cmd = /bin/true) completed the full real-device handover — H:1, MPos set — and post-resume X jogs ran the gantry clean (clamped 0). Host tests covered success, calibrated coords, runner-failure and timeout-kill.
   • LIVE gfcloud homing VERIFIED 2026-08-07 (bench, via $H): full sequence in 65 s — hunt (Z hall + hunt puls), lid image, corner move (head physically to back-left), confirmation lid image, quiet detect, final Z re-reference — ok + <Idle|MPos:0,0,10.593|H:1>, stream resumed clean. The FIRST live attempt failed and exposed four real bugs, all fixed the same day:
     1. gfhardware _run_loop halted every motion ~0.1 s in on a false SW_ESTOP trip — the estop sense reads low during any motion (facts bank above). Gate is now opt-in (MOTION.ESTOP_HALTS_MOTION, off in gfhome.conf).
     2. cnc.halt() didn't exist → the halt path crashed → deadman fd closed mid-run → real kernel e-stop (40V off, every later hunt skipped as 'Disabled').
     3. Camera conflict: gfhardware's direct V4L2 grab fails while forgectrl serves a stream (LightBurn holds one); the runner now captures via forgectrl /cam/snapshot (full-res, mux borrow, per-shot lamp= override — head images torch-off).
     4. Kernel: the deadman e-stop path ran sync SPI (PIC safing) inside the ATOMIC dms notifier chain → RCU splat. Chain is now blocking (trip point = pulsedev release, process ctx); the panic handler keeps only the atomic motion stop. Also mapped kernel state 'underrun' in gfhardware (state polls raised ValueError on it). Commits: gfhardware 8aa4a49 (+02e66c6 _hunt offset), forgectrl 0b05e48, forgefirm cc838f1, kernel-module 5fa558c — board runs all of it (module hot-swapped; gfhardware hot-patched over the pinned package). All repos are pushed and every recipe pin is bumped to these revisions (forgefirm 2dce136, meta-openglow 9e2aa34; recipes bitbake-verified from the new pins), so a fresh image build carries the whole homing release. Remaining homing polish: calibrate gfcloud_home_x/y against a jog to a known reference if the factory corner offset matters.
   • Limit-switch homing remains the planned second method; the accelerometer approach stays retired (implementation and bench record in grblHAL-glowforge history before commit 26298a3; durable accel/rail-contact measurements below). Durable measurements from the accelerometer spike (relevant to any future contact/vibration sensing; tools accel_fast.py, bump_seek.py remain in scripts/bench):
   • Sensors: the HEAD accel (lis2hh12) is i2c-3 addr 0x1e (0x1d on the same bus is a static board part; i2c-0 0x1e is the lid). st_accel sysfs one-shots are ~6 Hz and the kernel has no IIO triggers; direct I2C (unbind st-accel, CTRL1=0x6F = 800 Hz ODR) reads ~530 Hz from Python.
   • Rail-contact signature: creep baseline ≈0.5–2 k counts; contact jumps to 29–42 k within ~4 ms (20–40×). But slow approaches are near-silent — belt compliance turns slow-speed skipping into sub-threshold grinding — so any contact-sensing scheme must strike fast.

4. Controller safety mapping — IMPLEMENTED 2026-08-13, bench validation pending (grblHAL-glowforge/src/glowforge_switches.c). The controller reads EV_SW with EVIOCGSW from the protocol thread's realtime hook (no grab — forgectrl polls the same device) and maps:

   • doors (bit 3) not closed, or interlock (bit 5) loop open → the core's safety_door_ajar. A running job parks in the door state and resumes when the condition clears, which is what the hardware chain already does to the beam. Bit 3 is the series combination the safety chain itself uses, not the individual door switches.
   • hv_enable (bit 4): never gated on. It is the readback of the chain's HV_ENABLE output (facts bank above), telemetry only; the core's e_stop capability is not advertised. (The estop_halts_motion opt-in that existed until 2026-08-15 is gone, together with the name — see the facts bank.)
   • interlock latch (bit 6): deliberately not gated on. Its resting state on a healthy machine is not characterized and a false assertion would wedge every job; the hardware chain enforces it regardless.
   • No switch device (host builds) = no capability advertised, no signals. N5 answered: no software latch-reset path is needed. Interlock-trip recovery was exercised in commissioning runs without one — the chain recovers when the condition clears. cnc/laser_latch stays write-only (1 = lock), the driver's arm flow unlocks per job, and interlock_latch_reset remains a readback. Amended 2026-08-15: the interlock latch never trips at all in ForgeFIRM — see Next work item 11; the "recovery" seen in commissioning was the software safety-door path, not the hardware latch. Bench items: open the lid mid-job (expect Door at the sender, motion parked, cycle start resumes after close); a Pro with an unjumpered interlock connector (expect the same door behavior); confirm no spurious door events across a full job. Underrun → alarm was already covered by the stream-fault path. Changed 2026-08-15 (grblHAL a9446fe, host-tested, pin bumped, bench validation pending): the door signal is now hidden from the core while it is IDLE, JOG or HOMING (gfsw_visible, applied to both get_state() and the edge delivery) and delivered the moment it is in any other state. Reason: a lid cycle at idle — every material load, and a power-up with the lid open — left grblHAL parked in Door:0 until a cycle start, and LightBurn then sat at "Waiting for connection". Consequences: jog and $H are allowed with the lid open (beam hardware-blocked; upstream "ignore when idle" semantics), a job started with the lid open parks on the first poll, mid-job opens park exactly as before, and the cloud client (own EV_SW reader) is unaffected. Bench check: lid open/close at idle → state stays Idle; open mid-job → Door, close, ~ → resumes; Start with the lid open → Door immediately. Partly validated 2026-08-15 on image 20260815154622: LightBurn now connects after the lid has been opened and closed at idle (the original complaint). The mid-job and start-with-lid-open checks are still open, and the session surfaced further LightBurn door-open issues — see Next work item 12. 4b. Cloud-mode complete review (operator-directed 2026-08-03): load_motion preloads a job's ENTIRE pulse file into the ring with no backpressure recovery — with the 16 MiB default ring that caps cloud jobs at ~28 min and a too-big job fails mid-download; the write path needs rework (stream-during-run or graceful too-big rejection). Also: a marked TODO in load_motion copies every job's full pulse file into the logging directory (disk filler), and many cloud actions are not currently handled at all — review the action surface end to end (gfutilities service layer).

5. Camera service: DONE 2026-08-03, bench- and operator-verified (see "The camera service" section above; LightBurn streams it directly). Remaining camera work: lens calibration / bed alignment, the deferred 5.6 emulator homing-image smoke.

6. Housekeeping: pick the controller's remote home DONE 2026-08-02 — the controller is now the canonical driver repo github.com/ScottW514/grblHAL-glowforge (+ ScottW514/core fork; the settings-write crash fix is upstream PR grblHAL/core#999; repoint the submodule to upstream when it merges). Yocto recipe for grblHAL-glowforge DONE 2026-08-03 (grblhal-glowforge in meta-forgefirm, boot autostart, reboot-verified). Documentation sweep (CLAUDE.md charter, README roadmap, INSTALL/BUILD/kas README) DONE 2026-08-13. Remaining: kas flip + first GitHub release per kas/README.md once ready to publish.

7. Install/update system overhaul (planned 2026-08-08): adopt the factory A/B slot scheme end-to-end — fwup-packaged signed .fw releases, single-stage installer, GUI update manager + boot selector in forgectrl, offline factory restore from a /data archive, legacy-p4 migration, and later a refreshed recovery image in boot0. Full phased plan with invariants and decision gates: docs/UPDATE-SYSTEM.md (builds on the facts-bank eMMC map). Phase 0 COMPLETE, hardware-verified 2026-08-08: slot-agnostic images (root=${mmcroot}; the SAME release ext4 boot-verified from SD and from eMMC p4, steered by env alone — bench flip test), fwup toolchain cross-version proven (modern-packed signed .fw applies with the factory's 0.14.2; 0.14.2 wants raw 32-byte pubkeys), fwup in both images, slot-sized release rootfs + hard size gate + ext4 artifact + scripts/mkfw.sh. GAP found for Phase 1: the image ships fw_env tooling but no /etc/fw_env.config — hand-placed on the bench SD system (factory-identical: mmcblk2 0x80000/0x82000, 0x2000, redundant) — the ffboot-v2 recipe must install it. Phase 1 COMPLETE, hardware-verified 2026-08-08: ffboot v2 — -l machine-parsable slot inventory (the shared probe for the installer and the forgectrl update manager), verified atomic four-variable env flips (one fw_setenv -s transaction, read-back verify, libubootenv→classic→per-var format fallbacks — works on both fw_setenv flavors), content-probe gate on switch targets (-f overrides), probe-based -e newest-factory selection. The ffboot recipe installs /usr/sbin/ffboot + /etc/fw_env.config in the image (closes the gap above; build 20260808160821, ext4 still 180.8 MiB). Bench: -l classified every slot correctly, and ffboot itself drove the SD→p4→SD flip cycle (probe gate, both flips, clean returns). Untested edge: empty/unreadable-slot classification (no such slot on the bench; exercised naturally when Phase 2 overwrites a slot mid-install). Phase 2 COMPLETE — FULL SLOT INSTALL bench-proven end-to-end 2026-08-08 (operator at the factory console, agent over SSH): single-stage installer ran on the FACTORY 2024 firmware — archived both factory rootfs versions + boot0/boot1 (~88 MB total, manifest with md5s), signature-verified the dev-signed forgefirm.fw, applied it to slot 2 with the factory's own fwup (29 s), post-verified, verified-flipped, and ForgeFIRM booted from slot 2; slotmigrate reclaimed p4 and grew /data to the byte-exact factory geometry (827392/6725632; 0.7 s at boot, silent no-op thereafter); factory round-trip proven (ffboot -e → factory 2024 boots → -e2 back). 2024-firmware facts learned: no /factory/imgN mounts, generic fw_env.config points at the WRONG device (use per-device fw_env_mmcblk2.config — ffboot's selection logic), no SSH (serial console only), factory kernel cannot see the SD card (ffboot -s needs -f from factory). The bench board now runs ForgeFIRM v0.1.0 from eMMC slot 2 (factory 2024 in slot 1, archives in /data/forgefirm/archive, dev image still on SD via ffboot -s). The installer's embedded pubkey is the production release key (ceremony executed 2026-08-08; release.sh enforces the match). Post-test: the bench rests on the SD dev image again (ffboot -s; slot 1 = factory 2024, slot 2 = ForgeFIRM v0.1.0, archives in /data/forgefirm/archive). Platform fact pinned by experiment while chasing a console cosmetic: busybox mount's auto-type iteration against an already-mounted ext4 device prints a kernel "Can't open blockdev" for each foreign-type (ext3/ext2) exclusive claim before the ext4 attempt joins the existing superblock — the image's fstab keeps the factory slots mounted under /factory, so any auto-type probe of a slot triggered it. Cosmetic only; ffboot and the installer now reuse existing mountpoints from /proc/mounts and mount fresh targets with explicit -t ext4 (verified: dmesg count unchanged across ffboot -l).

8. Shared machine services — remaining polish. The consolidation itself is complete and drilled (see "Where the project stands" and forgectrl/docs/SERVICES.md); these are the deliberate leftovers, none of them blocking:

   • Diagnostics as engine modes. The Diagnostics flow tools still drive the thermal hardware themselves while the cooling engine suspends its writes and publishes fire-blocked. The check parameters and factory duties are already shared (cool.h, one definition for both), so what remains is folding the tools into the engine as modes and retiring the suspend/resume dance.
   • Rail policy (SERVICES.md "Pulse-device ownership", the one [contract] item left there). cnc/enable / cnc/disable are not forgectrl-only writes yet: under the broker no client drops the rail any more, but the GRBL driver still writes cnc/enable at init and at homing resume — idempotent, since the rail is already up and settled, so this is tidiness rather than a bounce source. (An idle-rail-off policy is not part of this: the rail stays up while the machine is on, per the wedge model in the facts bank.)
   • Busy-state arbitration under one lock. forgectrl's idle/busy gates (POST /settings, /mode, diagnostics start, upload/apply) each cross-check machine_is_idle() and update_job_running() at their own call sites. They fail closed and are drilled, but a single arbiter (one lock, one "who owns the machine right now" answer) would replace N targeted checks with one and close the remaining request-interleaving windows by construction.
   • HTTP surface caps. The daemon relies on MHD's default connection ceiling (a 500-connection flood plateaued at 379 fds under the raised 4096 RLIMIT_NOFILE, no crash, cnc/state readable throughout). An explicit MHD_OPTION_CONNECTION_LIMIT plus a per-IP cap is the right hardening, and the camera ensure_engine popen()s should move out of the HTTP callback so a slow media-ctl can never stall the request thread. Changing the MHD start flags touches the streaming model, so this waits for a bench slot of its own.
   • Cloud per-job fan profile. The cloud client passes the pulse header's AArd/EFrd/IFrd duties to the engine as the per-job run profile. Homing headers are verified end to end (they carry the idle-quiet profile the factory uses — no fans during a hunt); a real print header's duties should be confirmed through the same round trip at the next cloud print.
   • /cool/status cosmetics. The endpoint echoes the last reported armed flag even when that report is stale (report_age_s tells the truth), and a gfcloud homing session reports every motion as a job, so the engine cycles run → smoke → idle per motion. Both are silent and safe — the homing profile keeps the fans at idle duties — but motion actions reporting idle would be more honest.
   • Button edge detection. The GRBL arm flow reads the button as an EV_SW level; edge detection belongs in that reader. It does not change where the button is read (per-mode direct evdev, for latency) — the switch map itself is contract-documented and shared.

9. Kernel platform hygiene — CODE-COMPLETE and build-verified 2026-08-13 (kernel-module 6fdc4b2, meta-openglow 34a0e2e), bench validation pending. The batch edits the kernel overlay (DTS + config fragment), so it ships with a full image flash, not a module hot-swap — flash the next image before running the checks. What changed and what each item needs on the bench:

   • Panic handler enabled (INSTALL_PANIC_HANDLER 1), reduced to what is legal in atomic context: epit_stop() plus a direct io_change_pins(cnc_shutdown_pin_changes) — FIRE parked, charge pump low so the hardware watchdog stops being fed, latch reset asserted, steppers de-energized. It no longer calls _driver_stop() (hrtimer cancel, sysfs notify). Bench: panic mid-motion with motors locked and the laser latched; confirm motion stops and the safety lines read safe.
   • control_12v node dropped along with CONFIG_REGULATOR_USERSPACE_CONSUMER; the 12 V rail is regulator-always-on and nothing in userspace referenced the node. Bench: confirm the rail still comes up and the machine behaves identically.
   • struct gpio_desc layout hack removed. The commanded decay mode is tracked per axis and seeded at probe to mixed decay (both pins requested GPIOF_IN), instead of reading a private kernel struct. Bench: set each mode per axis and read the attr back.
   • Module build hygiene: -Wno-error dropped, .DELETE_ON_ERROR added, and the warnings that surfaced fixed (missing prototypes now static or declared in the new ledtrig_smooth.h; LED teardown no longer flushes the system work queue — the LED work runs on an ordered queue the driver owns and destroys). The recipe passes KCFLAGS=-Werror to hold the zero-warning state without making the module's own Makefile unusable against other kernels. Bench: LED brightness behavior, and a clean module unload.
   • Platform guards (not reservations — dmaengine has no channel reservation for this path): the SDMA channel number is range-checked and its takeover logged; the EPIT clock rate is read back at probe, failing probe at zero and warning below the rate needed to quantize step frequencies within 1 %; and io_verify_base_address() checks the GPIO-number→bank math against each pin's controller node in the DT, warning rather than failing. Bench: read the two new probe lines in dmesg and confirm no bank warnings.
   • head_make_safe implemented: measure laser off, UV LED off, lens motor de-energized (group-register clear-bits write) — legal now that the dead-man chain is blocking. Head fans and the white LED are deliberately left alone: SERVICES.md gives the fans to the cooling engine (whose stand-down keeps airflow after a job dies) and the white LED to the camera. Bench: trip the dead man's switch and read the head registers back.
   • The uniprocessor locking assumption and the panic/dead-man safe states are documented in kernel-module-glowforge/UAPI.md; no bench item.
   • hv_enable rename + polarity flip (2026-08-15) rides the same flash. The gpio-keys node for GPIO4_06 is now hv_enable, declared active-low, so EV_SW bit 4 reads as the HV_ENABLE output itself (inactive at idle, active through a run). forgectrl (/status key switches.hv_enable, panel "HV enable"), the grblHAL driver (SW_BIT_HV_ENABLE, no gating) and gfhardware (InputSwitch.SW_HV_ENABLE, no gating) all ship in the same image and read the new polarity; the DTS and that userspace must not be mixed across the flash (a mismatch only inverts the telemetry — nothing gates on the bit — but the dashboard would lie). Image 20260815162923 (forgefirm-image + forgefirm-image-dev) is built on these pins (forgectrl 801f1f3, grblHAL-glowforge b629c18, python3-gfhardware c3d1790, kernel module d750784, meta-openglow b1ba543): the built DTB carries the hv_enable node with gpios = <&gpio4 6 GPIO_ACTIVE_LOW> and no estop string, the rootfs forgectrl emits "hv_enable" and no "estop", the grblHAL binary has no estop_halts_motion, gfhardware/_common.py carries SW_HV_ENABLE, and the standard built-image checks pass (root locked, no watchdog daemon, K80/K90 order, glowforge.ko in extras/); the only build warning is the usual forced-do_compile taint note. Flashed and BENCH-VALIDATED 2026-08-15 (operator flashed; image reports 20260815162923 (dev), /proc/device-tree/switches/hv_enable present): with /status and cnc/charge_pump_alive sampled together at ~10 Hz on the board through a 5 mm X jog ($J=G91 X-5 F300, no Grbl client attached, laser locked): hv_enable:false / pump 0 at idle; true / 1 in the same sample the state went running; still true / 1 in the first idle sample after the run; pump 0 ≈0.4 s after that idle sample with hv_enable false in the next sample (89 ms later); the head returned to MPos 0.000. The switch reads as HV_ENABLE itself, in lockstep with the watchdog readback.
   • GATE A kernel fixes added to the same flash (2026-08-14): the controlled-deceleration ramp now floors at the minimum step frequency with a saturating decrement, and epit_hz_to_divisor() can no longer return the degenerate divisor 0 (a 0 Hz request maps to the slowest achievable tick); the resume waypoint re-enables the FIRE drive only when the laser latch is unlocked; and laser_latch writes run under status_lock, restoring the FIRE output drive only when no run or ramp is in flight. Bench (GATE A stays open — no live-fire — until these pass): a controlled-stop drill at the default cloud tick (10 kHz, ramp 125000) shows a decelerating tail rather than a max-rate burst; feed-hold, jog-cancel and ^X each land in a controlled stop with position preserved; a resume waypoint with the latch locked stays laser-less; laser_latch=0 written mid-ramp does not re-arm FIRE (probe the PSU-connector LASER_ON line as in fire_test.py). The GATE A part of this list is DONE (K1/K2/K3 + fire_test A/B/U pass on image 20260814223300, campaign record above); the platform-hygiene items themselves are consolidated in item 10.

10. Outstanding bench validations (consolidated 2026-08-15). Every safety-critical drill is done: GATE A (K1/K2/K3, fire_test A/B/U), GATE B (auth/CSRF/loopback/settings-flood probes), dry motion and dead-man drills (SIGKILL reap+safing, SIGSTOP → underrun, restart mid-move, no stray fd), the X-2 flood, and the live-fire set (A-1 emission witness, A-5 HV telemetry, X-3 job-based disarm, G-10 grace-in-Hold, A-2 lid-IR first look). What has not been run on hardware, none of it gating, in rough priority order:

    • Lid-IR fire characterization at cutting power — DONE 2026-08-15 (three cutting-power jobs, worst rise +6 counts, cool_fire_ir_delta = 15 set by hand in /data/forgefirm.conf). Then disabled again the same day (cool_fire_ir_delta = 0): the channels track the lid LED (0→2, 131→~58, 255→~180 counts), so any lamp change during a run — a panel snapshot lights the lamp — steps them by tens of counts and a fixed-count gate would stop the job on a phantom FIRE. Redesign before re-arming: the engine must own or observe the lamp level (suspend the watch and re-baseline for a few ticks after any lid_led change; forgectrl drives it for captures, the cloud client for lid images), and the threshold should be relative to the lamp-set level, not a fixed count. Even then the signal is weak (a candle reads like a cut); the head camera or a real flame sensor is the honest path to fire detection that means something.
    • Kernel platform-hygiene batch (item 9), on the flashed image — DONE 2026-08-15 (panic mid-motion, decay/microstep readback, LED sequence + clean unload, probe lines, dead-man head readback, concurrent cat during rmmod — session record above). Still needing a debug kernel build: load/unload under CONFIG_DEBUG_MUTEXES and a forced -EPROBE_DEFER unwind.
    • Dead-man collateral — DONE 2026-08-15: the trip leaves pump and airflow running (readback drill); helper children never hold the pulse device (fd-scan during /update/check + snapshot); the armed kill on the expected-stop path failed first (5 s of continued fire), the defect is fixed on both sides, and the re-run passed. The literal "kill forgectrl mid-download" variant needs a published .fw to download and was covered by the fd-scan instead.
    • Physical-evidence negatives: head absent at power-up DONE 2026-08-15 (head group absent → no readings, arm refused, presence and motion labels fixed). Still open: a present head answering I²C badly (the K-11 runtime case) and a failed head capture leaving the measure laser off — both need the head connected and a fault injected.
    • Cloud mode — mostly DONE 2026-08-15: mode switch clean (GRBL controller exit 0x0, gfcloud signed in, connect-time hunt + lid image ran); network/DNS blip (service peers blackholed + dead resolver for 75 s while the session was live): ping/pong timed out - goodbye → in-process RECONNECTING, sign-in retried with backoff through the outage, authenticate_machine SUCCESS and the service's settings action answered right after restore, same process, supervisor never involved — PASS; a real print (22.9 s, motion bytes actual = expected, emission peak 91, HV 0..932): the header's AArd 1023 / EFrd 65535 / IFrd 43278 drove air 11.0 k / exhaust 11.8 k / intake 4.1 k rpm through the armed window and the hunt/Z headers (204/0/0) left the fans at idle levels — the per-job profile round-trips (directional; duty→rpm not calibrated); no false FIRE trip on the job. $H witness re-verified (7 windows ≥ 500 at ~100 Hz). Still open, not inducible from the bench: the cancel-with-a-rejected-settings-action case, a malformed frame (needs a MITM), the oversize/bad-header job (tracked in CLOUD.md).
    • Opportunistic: STATE_FAULT recovery via enable without a module reload the next time a DRV8825 fault line actually trips.
    • Config-dependent, deliberately not gated: an armed GRBL job after an underrun cuts at the stale origin unless homing is required (GRBL mode permits unhomed cutting; the underrun itself alarms and unlinks the anchor).

11. Interlock latch has no hardware trip path in ForgeFIRM (found 2026-08-15, bench-verified). With the interlock connector unjumpered at idle: EV_SW interlock=1 (loop open), interlock_latch=0 (not tripped), cnc/interlock_circuit=13 (b4 INTERLOCK_RESET=0), interlock_latch_reset=0. This matches the safing schematic: the interlock latch (U23-2, CD4043B) has RESET = loop-closed and SET = INTERLOCK_RESET (GPIO4_05) — an open loop only releases the reset, and nothing in ForgeFIRM drives INTERLOCK_RESET (the driver exposes it as a read-only readback, initialized low; the former interlock_reset LED node that let userspace drive it is gone). So on a machine with a real external lockout (Pro), an open loop does not cut LASER_ON in hardware; enforcement is the GRBL safety-door hold on switch code 5 and the cloud client's motion gate. Basic/Plus ship the loop jumpered. Decision + fix needed: drive INTERLOCK_RESET high whenever the loop is open and hold it until the loop closes, so Q2 blocks the LASER_ON gate in hardware (the CD4043B is set-dominant, so the latch stays blocked until the SoC releases SET and the loop is closed). IMPLEMENTED 2026-08-15 (kernel-module, code-complete, bench validation pending; kernel-module 015913b, meta-openglow 92d6e20 DTS + 897c175 pin, forgectrl a451e7c docs, all pushed and pins bumped 2026-08-15): src/cnc_interlock.{c,h} — an in-kernel input handler on the gpio-keys switch device (no DT change, GPIO stays with gpio-keys) drives INTERLOCK_RESET high while EV_SW code 5 reads open, from probe until the switch device attaches, and if it detaches (unobservable = open); low only while an attached device reports the loop closed. Pin init changed to GPIOF_OUT_INIT_HIGH. Proof so far: host test tests/interlock_test.c (8 cases, make -C tests check, new CI job host-tests) green; module cross-compiled clean against the staged 6.12.20-fslc kernel with KCFLAGS=-Werror, MODPOST silent. Ships with the next image flash (kernel changes are never hot-swapped); bench re-run of this exact reading then expects interlock_latch=1 / interlock_circuit b4=1 with the loop open, both clearing after it is closed. BENCH-VALIDATED 2026-08-15 on image 20260815150546: loop pulled → interlock=1, interlock_latch_reset=1, interlock_latch=1, interlock_circuit 45→61 (b4 set), all within one 50 ms sample; reinserted → all clear the same way. Side effect to know: the pull is a grblHAL safety-door hold — the controller sits in Door:0 after the loop closes until a cycle start (~) returns it to Idle (a client connecting then sees Door, not a dead link). Same batch: the charge-pump watchdog readback (cnc/charge_pump_alive, interlock_circuit b5; GPIO1_08 = inverted one-shot Q, new charge-pump-alive-gpio + GPIO_8 pad in the linux-fslc DTS — kernel module and DTB must ship together, the pin is required at probe; DTB compile-checked with cpp+dtc against the staged kernel) — also bench-validated 2026-08-15: two X jogs sampled at 50 Hz: state running → charge_pump_alive 1 and estop 0 (pre-rename name and polarity of today's hv_enable) in the same 20 ms sample; after each run charge_pump_alive fell 0.325 s / 0.326 s after idle, which with the 200 ms feed phase (last pulse 0.136 s / 0.118 s before the run end) is a one-shot period of 0.46 s / 0.44 s — matching the measured R·C (≈500 kΩ × ≈900 nF = 0.45 s); estop re-asserted with the drop both times, i.e. HV_ENABLE = DOORS_OK · WDOG_ALIVE observed live. Full write-up of the chain: docs/SAFETY.md (+ docs/img/safety-chain.svg).

12. LightBurn door-open handling — further issues (found 2026-08-15, details pending). With image 20260815154622 (grblHAL a9446fe: door signal hidden while idle/jog/homing) LightBurn connects again after an idle lid cycle, but the same bench session turned up other problems around lid opening in LightBurn that were not characterized on the spot. To be detailed and reproduced in a dedicated testing session: symptoms, whether they involve the mid-job Door hold / Resume path, Start-with-lid-open, or the sender's own handling of the Door state, and what the controller reports at each step. Until then the door change stands as partially validated (item 4).

13. uSDHC pad strength brought to the factory values (DTS change 2026-08-15, bench validation pending — ships with the next full image flash, per the batched kernel/BSP rule). Trigger: one wl1271_sdio mmc0:0001:2: sdio write failed (-84) (-EILSEQ = SDIO bus CRC error) on the WL1805 Wi-Fi bus at 49.5 MHz SD-high-speed, followed by wlcore's designed hardware recovery (firmware reboot + reassociation, ~1.0 s of Wi-Fi outage) and one ipu1_csi0: NFB4EOF 160 ms later (a consequence of the recovery/WARN console burst, not a co-cause). It happened at idle, 1.7 s after a kernel run ended and ~2 s after a button press — no motion, no fire, HV_ENABLE already down — so nothing points at laser or stepper EMI. Rate observed: 1 event in 49 min of uptime. Effect if it lands mid-job: a 1–2 s sender stall (planner drains, head pauses; laser off in M4 mode) — a cut-quality nuisance, never a safety matter (nothing safety-relevant crosses Wi-Fi). Finding: glowforge.dts drove all three uSDHC controllers with 0x17019 (SPEED_LOW, DSE 80 Ω, 47 kΩ pull-up on CLK too), while the factory DTB uses 0x17069/0x10069 (SPEED_MED, DSE 48 Ω; no pull on CLK) for the Wi-Fi bus and 0x17059/0x10059 (80 Ω) for eMMC and SD (SD2_DAT3 0x13059) — softer edges than the factory at the same 50 MHz clock. openglow_common.dtsi now carries the four factory-exact values (USDHC_PAD_CTRL, USDHC_CLK_PAD_CTRL, USDHC_SDIO_PAD_CTRL, USDHC_SDIO_CLK_PAD_CTRL) and the compiled fsl,pins tuples were checked byte-identical to the factory DTB's glowforge_usdhc1/2 and usdhc3grp. Bench: on the next image confirm pinconf-pins reads 0x17069/0x10069 on SD1, eMMC and Wi-Fi come up, then watch dmesg | grep -c "sdio .* failed" across sessions (baseline: 1 per ~49 min). Only if it still recurs, cap the bus with max-frequency = <25000000> on &usdhc1 (halves Wi-Fi throughput — last resort; the factory ran 50 MHz on these pads). The WARNING … wlcore/main.c:874 wl12xx_queue_recovery_work block that accompanies the event is upstream noise (an "unintended recovery" WARN_ON), not a crash — the -84 line is the signal to watch.

14. Unified logging — CODE-COMPLETE, host-verified, pushed and pinned 2026-08-15; bench validation pending — ships with the next full image flash (rsyslog replaces busybox syslogd/klogd, so it is an image change). Design and contract: forgectrl/docs/SERVICES.md "Logging". In brief: rsyslog is the only log writer; forgectrl and the grblHAL driver emit through the shared non-blocking fflog emitter (drops, never waits — a stalled log daemon can never park a controller thread), gfcloud/gfhome through SysLogHandler, the kernel through imklog; a controller's stray stdout/stderr rides a per-controller logger relay under its own name; the daemon's own stray output a fifo relay in its init script. Tree: /data/log/forgefirm/{forgectrl,grblhal,gfcloud,gfhome,kernel,system}/, size-capped and rotated (forgefirm-logging recipe: renders the rsyslog rules from the settings at S19 via forgectrl --render-syslog, sweeps the pre-syslog files once into /data/forgefirm/legacy-logs/, logrotate at boot + hourly with a HUP, never copytruncate). Levels: log_<logger>_disk / _remote and syslog_server/port/proto in /data/forgefirm.conf, applied at reboot (the panel's Logs tab shows configured vs. effective and offers the reboot); a process emits at the more verbose of its two levels, rsyslog filters per destination. Export: POST /logs/export streams a tar.gz (tree + system snapshot), sanitized by default (src/sanitize.c: known values first — serial, hostname, cloud credentials, panel token, WiFi SSID/PSK — then patterns; stable placeholders; tests/sanitize_test.c in CI, 39 fixtures). Host proof done: forgectrl/grblHAL -Werror builds and all three CI test sets green (sanitizer, idle fail-closed, switch map, arm re-check, laser stream + armed-window harnesses on the null-sink build); tests/fflog_e2e.sh against a private rsyslogd on the shipped rsyslog.conf (emitter format, per-logger routing, level filtering, logger relay routing) and the equivalent Python check both pass; /logs, /logs/tail (full + incremental follow), and both export variants exercised over HTTP on a host build and the panel's Logs tab driven in a browser (levels table, viewer, follow, export). Bench, on the flashed image (dev image 20260815191634, flashed and booted by the operator 2026-08-15):

    • boot DONE 2026-08-15: S19forgefirm-logging → S20syslog → S90forgectrl, K80/K90/K95syslog; rsyslogd up, no busybox syslogd/klogd; rules and /var/run/forgefirm-loglevels rendered (all defaults); six directories under /data/log/forgefirm; /var/log/messages gone; legacy files moved to /data/forgefirm/legacy-logs/ (forgectrl.log, forgectrl.log.old, gfcloud.log, gfcloud/, gfhome/), /data/log/gfcloud and /data/log/gfhome gone, the factory's /data/glowforge.log* untouched; the forgectrl fifo relay and the grblhal relay both running (logger ×2, /var/run/forgectrl.stderr).
    • routing DONE 2026-08-15 for GRBL mode: forgectrl lines (super: liveness probe: MOTION OK …, NOTICE super: started grbl controller) in forgectrl/forgectrl.log; grblHAL's (gfstream: pulse device inherited from the broker) in grblhal/grblhal.log; the whole boot ring (350 lines, glowforge_cnc cnc: 40V on …) in kernel/kernel.log with correlated timestamps; sshd/rsyslogd in system/system.log; logger -t grblhal / -t gfhome probes land in the right files tagged grblhal[-] / gfhome[-] (the relay path). /logs, /logs/tail and the sanitized export served over the LAN: the bundle carried <SERIAL> ×2, <IP-1> for the LAN peer (sshd Accepted … from <IP-1>), MACs and e-mails redacted, no LAN address anywhere in it. Still open: cloud-mode routing (gfcloud/gfcloud.log + a Python traceback via the relay) and a $H for the gfhome lines. Found and fixed the same day: rsyslogd warned at start that the fallback rule after the include was unreachable (the rendered rules end in stop) — the default rules now come from the init script when the render leaves none (forgefirm 7487f90, next image).
    • levels: set grblhal disk to debug in the panel → the pending marker and banner appear; after reboot the per-run gfstream: run: stats appear; set it to warning → they stop; off → the file stops growing. Remote: point syslog_server at a LAN host running nc -ul 514 (or rsyslog), one logger's remote level info, reboot → RFC 5424 lines arrive; unplug the host → the machine keeps cutting/logging locally, nothing stalls (per-action queue discards).
    • rotation: logger -t grblhal a 3 MB burst (or a debug-level session) → the hourly/boot logrotate produces grblhal.log.1.gz and the live file keeps receiving lines (HUP reopen).
    • export: download both bundle variants from the panel; the sanitized README.txt lists redactions and no bundle file contains the machine's serial, XXX-YYY hostname, WiFi SSID, or a LAN IP (grep the extracted tree); the unsanitized one does. Staging under /data/forgefirm/tmp/ is empty afterwards.
    • RT: a debug-level GRBL session with LightBurn streaming — producer stats clamped 0, no underrun (fflog is non-blocking; nothing logs from the shipper).
    • /etc/init.d/forgectrl stop/start — the fifo relay comes and goes with the wrapper; a forced daemon crash logs the wrapper's exited (N) - respawning in 5 s line under forgectrl.

15. Release acceptance tool (forgetest) - CODE-COMPLETE 2026-08-15, host- and build-verified; bench validation pending, ships with the next full image flash. Contract: docs/ACCEPTANCE.md; catalog v1 complete (24 tests, coverage lint enforced in CI, rule in CLAUDE.md). Images for the flash are archived under images/20260815193946/ (release …193946 + dev …194415, one tree; the two manifests share the acceptance identity, the release image carries no forgetest). Remaining, in order: (a) bench: boot that dev image, run the catalog from :8090 - the takeover, motion, cooling, live and cloud tests are ports of proven scripts and need their first run on the machine (expect pass-criteria tuning: fan tach tolerance, snapshot size floor, timeouts) - export, and drive one UI-only pin bump to prove the inherited/required split; (b) the remaining bench-tab ports (scope tools, host-side flow characterization, the live drills - the catalog carries their acceptance forms); (c) the first release runs the full campaign and commits releases/v<version>/acceptance.json.