mirror of
https://github.com/openglow-org/forgefirm.git
synced 2026-10-16 01:29:55 -07:00
ScottW514
8e1fe5090d
The grblHAL harnesses keep what only a running controller shows; the cases a host unit test in grblHAL-glowforge proves, and the log and reply wording, leave. - laser_lifecycle_test: test_arm_waits_for_the_fans goes. laser_arm_test case A4 (grblHAL-glowforge) proves the fan grace stretching the arm's acknowledgment budget, on the same arm path. The docstring names it. - xy_mode_test: case_x32, case_invalid and the log checks go; the default, x16 and the low tick stay. xy_scale_test holds each mode's tick and the not-a-mode parse. - planner_blocks_test: one restart, at $398 1000; the 400 pass and the fresh-store probe go. - ctlport_test: test_poll_lf and test_crlf go (the CR LF poll stays); in test_sender_out the network turn-away goes (serial_test holds it), and the busy gating, the grant and the outlives-client part stay. test_port_dark is whole. - mcode_test: the timeout case runs on the host build's 5 s GFMCODE_WAIT_S (grblHAL-glowforge's CI configures it; the image keeps 30 s) and still shows the hold, at 5.1 s; 5 s outlasts the 3 s test_dark watches the wait; test_table refuses one form per parser branch. test_timeout_holds and test_dark stay. - envelope_test: test_unset and test_bounds go (lens_home_test holds the clamp); test_armed and the open, apply and close cases stay. - manual_home_test: the out-of-range offset block goes, a repeat of gfhome_clamp_home_mm (lens_home_test); the modal-M3 FIRE check and every release and energize case stay. - cool_report_test: one non-hex secret and one CR LF injection stay; runner-malformed and the exact header-set checks go. A bad secret is never sent and a good one is. - tray_test: test_offset keeps 20 mm; test_errors keeps a bad P and a bad axis; the frame shift, envelope, barrier, persistence, port op, unreferenced lens and camera home stay. Proof: with grblHAL-glowforge's matching commit, the eleven harnesses its CI runs pass under Linux against the null-sink build: nine on a build with a 1 s M-code wait, and mcode_test and tray_test, the two that wait at an M-code, on the 5 s build CI configures (-DGFMCODE_WAIT_S=5.0). pyflakes reports nothing in the nine changed files. Push this before grblHAL-glowforge's commit. Acceptance: none; host harnesses only.