mirror of
https://github.com/openglow-org/forgefirm.git
synced 2026-09-29 09:31:17 -07:00
ScottW514
01d336875e
Enable the read-only firmware-version probe and point it at /data/forgefirm/gf-latest.json, where the web-service client records the latest firmware Glowforge advertises and the version this release was tested against. forgectrl reads that file for the cloud-mode compatibility banner.
46 lines
1.6 KiB
Plaintext
46 lines
1.6 KiB
Plaintext
# gfhome - Glowforge web-service homing configuration.
|
|
# Copied to /data/etc/gfhome.conf on first run; edit the copy.
|
|
# Machine identity (serial/password) is read from the OCOTP fuses;
|
|
# gf_serial / gf_password in /data/forgefirm.conf (the forgectrl UI,
|
|
# GF Cloud tab) override it. The service hostname always derives from
|
|
# whichever serial is in effect.
|
|
|
|
[SERVICE]
|
|
server_url: https://app.glowforge.com
|
|
status_service_url: wss://status.glowforge.com
|
|
|
|
[FACTORY_FIRMWARE]
|
|
# check: probe the firmware version the service advertises so forgectrl can
|
|
# warn when Glowforge has moved past the version this release was tested
|
|
# against. Read-only - ForgeFIRM never downloads or installs factory firmware.
|
|
check: True
|
|
# Where the probe records {latest_gf_version, tested_against_gf}; forgectrl
|
|
# reads this for the cloud-mode compatibility banner (GF_LATEST_FILE).
|
|
status_file: /data/forgefirm/gf-latest.json
|
|
|
|
[LOGGING]
|
|
file: /data/log/gfhome/gfhome.log
|
|
level: INFO
|
|
save_sent_images: False
|
|
|
|
[THERMAL]
|
|
# The heater stays off during homing; thermal policy belongs to the
|
|
# motion controller.
|
|
water_heater_percent: 0
|
|
max_start_temp: 30
|
|
|
|
[MOTION]
|
|
# Extra lens half-steps applied after the hunt (0 = hall reference).
|
|
z_home_offset: 0
|
|
warm_up_delay: 0
|
|
cool_down_delay: 0
|
|
# The factory board's estop sense line reads low during any motion, so
|
|
# it must not gate motion there; enable only on hardware with a real
|
|
# e-stop circuit.
|
|
estop_halts_motion: False
|
|
|
|
[FORGECTRL]
|
|
# Camera captures fetch from the forgectrl daemon (it owns the camera
|
|
# pipeline); direct V4L2 capture is the fallback.
|
|
url: http://127.0.0.1:8080
|