#!/bin/sh
# (C) Copyright 2020-2026
# Scott Wiederhold, s.e.wiederhold@gmail.com
# https://community.openglow.org
# SPDX-License-Identifier:    MIT
#
# Legacy-layout migration: reclaims the legacy ForgeFIRM partition (p4)
# and grows /data (p3) to the end of the eMMC, restoring the factory
# disk footprint. Runs in rcS before mountall, so /data is not yet
# mounted. Every step is keyed off the actual disk state - an
# interrupted run resumes on the next boot; a factory-layout disk is a
# fast no-op. Only acts when booted from an eMMC rootfs slot: SD boots
# (bench/dev) never touch the eMMC and p4 itself must not saw off its
# own branch.

DISK=/dev/mmcblk2
P3=${DISK}p3

log () {
  echo "slotmigrate: $*"
  echo "slotmigrate: $*" > /dev/kmsg 2>/dev/null
}

case "$1" in
  start|"") ;;
  *) exit 0 ;;
esac

# Runs at S02, possibly before the sysfs/proc mount scripts.
mountpoint -q /proc 2>/dev/null || mount -t proc proc /proc 2>/dev/null
mountpoint -q /sys 2>/dev/null || mount -t sysfs sysfs /sys 2>/dev/null

[ -r /proc/cmdline ] || exit 0
ROOT=$(sed -n 's/.*root=\([^ ]*\).*/\1/p' /proc/cmdline)
case "$ROOT" in
  /dev/mmcblk2p1|/dev/mmcblk2p2) ;;
  *) exit 0 ;;
esac

command -v sfdisk >/dev/null || { log "sfdisk missing, skipping"; exit 0; }
if grep -q "^${P3} " /proc/mounts; then
  log "/data already mounted, skipping this boot"
  exit 0
fi

# --- partition table -----------------------------------------------------
if sfdisk -d "$DISK" 2>/dev/null | grep -q "^${DISK}p4"; then
  log "removing legacy partition p4"
  sfdisk --no-reread --force --delete "$DISK" 4 >/dev/null 2>&1 \
    || { log "p4 delete FAILED"; exit 0; }
  partx -d --nr 4 "$DISK" 2>/dev/null
fi

DISK_SECT=$(cat /sys/class/block/mmcblk2/size 2>/dev/null)
P3_START=$(sfdisk -d "$DISK" 2>/dev/null | sed -n "s|^${P3} : start=[ ]*\([0-9]*\),.*|\1|p")
P3_SIZE=$(sfdisk -d "$DISK" 2>/dev/null | sed -n "s|^${P3} .*size=[ ]*\([0-9]*\),.*|\1|p")
[ -n "$DISK_SECT" ] && [ -n "$P3_START" ] && [ -n "$P3_SIZE" ] \
  || { log "cannot read disk/p3 geometry"; exit 0; }

if [ $((P3_START + P3_SIZE)) -lt "$DISK_SECT" ]; then
  log "growing p3 to the end of the disk ($((P3_START + P3_SIZE)) -> $DISK_SECT sectors)"
  echo ", +" | sfdisk --no-reread --force -N 3 "$DISK" >/dev/null 2>&1 \
    || { log "p3 grow FAILED"; exit 0; }
  partx -u --nr 3 "$DISK" 2>/dev/null
fi

# --- filesystem ----------------------------------------------------------
PART_SECT=$(cat /sys/class/block/mmcblk2p3/size 2>/dev/null)
[ -n "$PART_SECT" ] || { log "cannot read p3 size"; exit 0; }
FS_BLOCKS=$(tune2fs -l "$P3" 2>/dev/null | sed -n 's/^Block count:[ ]*//p')
FS_BSIZE=$(tune2fs -l "$P3" 2>/dev/null | sed -n 's/^Block size:[ ]*//p')
[ -n "$FS_BLOCKS" ] && [ -n "$FS_BSIZE" ] || { log "cannot read p3 filesystem"; exit 0; }

FS_SECT=$((FS_BLOCKS * (FS_BSIZE / 512)))
if [ "$FS_SECT" -lt $((PART_SECT - 2048)) ]; then
  log "growing /data filesystem ($FS_SECT -> $PART_SECT sectors)"
  e2fsck -f -p "$P3" >/dev/null 2>&1
  RC=$?
  if [ "$RC" -ge 4 ]; then
    log "e2fsck found errors (rc=$RC), NOT resizing"
    exit 0
  fi
  resize2fs "$P3" >/dev/null 2>&1 \
    && log "/data grown to full size" \
    || log "resize2fs FAILED (will retry next boot)"
fi

exit 0