- kas/README.md: the real-time rationale rests on the feeder's bounded
queue depth, not ring size; the ring is 16 MiB (~84 s at 200 kHz,
~28 min at the 10 kHz cloud tick), a capacity for cloud-mode preload.
- BUILD.md, kas config, release checklist, cold-build workflow: only
forgefirm and meta-openglow (branch scarthgap) are cloned as
siblings; every ForgeFIRM source repo is fetched by pinned SRCREV.
- UPDATE-SYSTEM.md reads as the present-state design: the cloud-mode
compatibility baseline is the cloud client's configured firmware
version, not release metadata; decisions and open items listed
plainly.
- README.md states what GRBL mode still needs the Glowforge service
for (camera-referenced homing) and what runs without it.
- BRINGUP.md: generic build-host and fwup-lab references, the retained
reproductions of the no-fire drill, the System tab.
- LIGHTBURN.md: the arm-window timeouts are machine settings.
- forgefirm-image.bb describes forgectrl as the machine-services
daemon and points at the right backlog entry.
- American spelling throughout.
Add Next work item 9: the panic handler, control_12v removal, decay-mode
state tracking, module build hygiene, SDMA/EPIT/GPIO probe guards and
head_make_safe are code-complete and build-verified, with the bench check
each one still needs and a note that the batch ships with a full image
flash rather than a module hot-swap.
kas/README: drop the control_12v residue (the node is gone), state that
the buzzer driver is not part of ForgeFIRM, and record that the pre-SPDX
LICENSE strings remain only in layers this build does not use.
README: replace the stalled REST/GUI roadmap with what the firmware does -
GRBL mode over TCP for LightBurn/UGS/cncjs, optional cloud mode, the web
control panel, cameras, A/B install beside the factory firmware - plus the
supported hardware incl. the 8 MP camera limitation and a real roadmap.
kas/README: xvclk is the board's 24 MHz oscillator; the pin/push rule covers
every source repo; camera and motion sections are hardware-validated, with the
OV8856 caveat spelled out; the device-tree item closes with the control_12v
residue named; forgectrl is the machine-services daemon with two supervised
controllers.
LIGHTBURN.md: drop the pre-first-light status line.
BUILD.md: state the NXP firmware licensing and where the EULA lives on the
machine. The image now installs firmware-imx-lic, so the EULA text ships beside
the VPU/EPDC blobs it covers; a bbappend declares that package at parse time,
which is what makes it installable from an image recipe.
Gates (clean tree, version single-source across FORGEFIRM_RELEASE /
rootfs stamp / .fw meta-version / tag, rootfs-vs-slot size with early
warning, installer-embedded pubkey must match the signing key,
factory-era fwup verification of the packed archive), then build,
pack, sign, checksum, and stage forgefirm.fw + sha256sums.txt +
forgefirm-image-glowforge.rootfs.wic.gz with the gh publish command
(--publish runs it where gh is authenticated). release.sh --dev packs
a dev-key-signed forgefirm-dev.fw from the release rootfs for the GUI
upload path. Signing keys are always passed explicitly - no defaults.
kas/README release order and the plan doc updated to match.
gitsm-pinned build of the controller with a sysvinit script (defaults 92, after forgectrl), installed in both images. Reboot-verified on the bench: controller and forgectrl come up unattended and Grbl answers on TCP:23.
Sources live at github.com/ScottW514/forgectrl (history extracted, layout src/ + init/); the recipe pins SRCREV and installs the init script from the repo. Adds the build-forgectrl.sh bench cross-compile script.
CONFIG_PREEMPT=y (factory behavior); PREEMPT_RT unavailable on arm32
6.12 and unnecessary for the pulse feeder - the 128 MiB SDMA ring at
1 byte per EPIT tick holds minutes of stream, so deep buffering plus
SCHED_FIFO rides out any PREEMPT-scale scheduling latency. Documents
the audit M9/N15 arithmetic next to the migration backlog.
kernel-module-glowforge and python3-gfhardware are now pushed and pinned by
SRCREV in meta-openglow (no AUTOREV anywhere), and the meta-openglow
Scarthgap port is published on its scarthgap branch. Record the full
push/release sequencing in kas/README.md (incl. the release-time flip to the
pinned-remote meta-openglow block and the release-asset naming rule), and
commit the kas lockfile pinning poky/meta-openembedded/meta-freescale(-distro)
at the revisions the working build used.
The untracked kas/externalsrc-dev.yml overlay (local python3-gfhardware via
/mnt/c) is removed: the pinned SRCREV replaces it.
Replace the repo + default.xml + setup-environment workflow with kas:
- add kas/forgefirm-glowforge.yml (Scarthgap layers pinned, meta-openglow
as a local sibling) and kas/README.md
- remove default.xml, base/conf/forgefirm-bblayers.conf,
scripts/setup-environment
- .gitignore the kas-managed layers/ and build caches
- BUILD.md: kas host setup and build instructions
ScottW514