The remaining bench diagnostics run from forgetest's #bench tab. The
tools that also run from a LAN host share scripts/bench/gfbench.py:
GF_HOST names a remote machine (host mode, sysfs through ssh, Grbl and
forgectrl over the LAN); unset, the tool runs on the board itself
(local mode, sysfs directly, everything on 127.0.0.1), which is how the
page runs them - with GF_HOST=127.0.0.1, the panel token in GF_TOKEN
and their data files under <data>/bench/ (FORGETEST_BENCH_DATA). The
helper also reads a machine setting from forgectrl, or from the settings
file on the board while forgectrl is stopped.
Ported: pwm_sweep / pwm_hold (scope = a takeover; the latch relocked,
the write refused if FIRE or LASER_ON reads active), pwm_stream_test
(PASS/FAIL exit), flow_characterize, flow_recheck_char,
flow_warm_validate and flow_matrix (takeovers: forgectrl owns the
thermal hardware, so the page's takeover replaces the tools' own
controller stop/restart, whose command line predated the supervisor;
results and logs in the bench data directory), flow_sustained,
fan_test, temp_calibrate (dry; watch bounded in seconds; the threshold
and the coolant conversion from the shared code), flow_escalate_drill
(cool_confirm_max_s shortened through forgectrl's settings for the
drill and restored; the setting's minimum is the default budget), and
live_fire_drills (<drill> [S] [F], all six drills, host from GF_HOST,
token from the board). flow_matrix joins the registry. What stays
unported cannot run against the machine at all: the two null-sink CI
harnesses and the .puls decoder.
Runner: a scope tool runs inside the takeover wrapper; the bench
environment above is passed to every tool. Tests: test_bench_registry
(registry <-> scripts/bench consistency, every ported tool builds its
command line, every script compiles, gfbench host/local modes) and the
server test (scope tool takeover, the environment reaching the tool).
Local mode smoke-run on the bench (temp_calibrate watch, setting, token)
from /tmp, removed after.
No catalog consequence: bench tools are not image components (dev-only
forgetest); the acceptance catalog is unchanged.
A baseline pass brackets every test and bench tool: before the run the
machine is verified against the fresh-boot idle state and anything off it
is restored; after the run - pass, fail, or abort - it is restored again.
Fixed items are the resting values the boot establishes (module defaults,
forgectrl's start-up writes, the GRBL controller's init writes) and
forgectrl's idle picture (controller running with motion verified, no
diagnostic, camera and cooling engines idle); preserved items (lid lamp
level, position counters, settings map, controller mode) are captured
before and handed back after. Deviations are leftovers: in the run pane,
in the result's evidence, and on the page - attributed to the previous run
when found before, to the run itself when found after.
forgetest takes a fresh-boot reference once per boot (within ten minutes
of boot, after the supervisor settles) as the session's resting lid-lamp
level and the check on the fixed values; the values were confirmed
against a fresh boot of the dev image on the bench (step_freq rests at
28160, the controller's default tick, not the probe's 10000).
Takeover runs capture the controller-owned kernel attributes on entry and
write them back before forgectrl restarts: the bench found the kernel
tests leaving motor_lock=15 behind, which masked the supervisor's
liveness probe - no motion by construction, a false driver-wedge verdict,
the rail-off ladder, and finally motion-fault. The takeover wrapper also
waits for the supervisor to settle on both sides (moved into baseline).
Catalog consequence: none beyond the runner; the tests' own drills are
unchanged.
forgectrl's supervisor probes motion liveness on every start - a small
head move verified by the accelerometer, with a rail-off ladder of up to
about 70 s on a dead verdict. The takeover wrapper returned as soon as
forgectrl start succeeded, so a test that followed found the machine
busy (bench: cooling.flow-verify refused with 409 machine is not idle
13 s after kernel.fire-abu), and back-to-back takeover tests stopped
forgectrl mid-probe. The wrapper now waits for /mode to settle - motion
verified, motion-fault (logged as a warning), or standby - before it
stops forgectrl and again after it starts it, giving up after 10 s when
forgectrl does not answer at all (the host, or a daemon that is down).
No catalog consequence: the takeover tests' own drills are unchanged.
A stdlib-only daemon on the dev image (HTTP :8090) that runs the acceptance
catalog against the machine from a self-contained page, keeps the append-only
result log under /data/forgetest, and exports the release artifact the gate
reads. Tests declare kind (auto / operator / live), hardware (api / takeover),
coverage globs, prerequisites, and core membership; a test's domain
fingerprint is the hash of the manifest files its globs select plus the
platform and its own implementation, so a PASS stays valid exactly while
nothing it covers changed. Campaign rules: a FAIL ends the campaign, the core
(image health, kernel latch and drills, one live emission witness) is never
inherited, invalidate-all forces a full campaign, no SKIP. Live tests need the
operator acknowledgment and the physical arm press through the controller;
takeover tests stop forgectrl for the duration with a crash-recoverable
marker; the tool never touches the laser latch.
Catalog v1: 24 tests ported from the proven bench drills with their recorded
pass criteria (image, kernel K1-K3 and fire A/B/U, forgectrl API and logs,
motion incl. dead-man, cooling, live laser, camera, update, cloud). The bench
tab lists every scripts/bench tool and runs the board-side ones as
subprocesses (takeover tools wrapped). 44 host unit tests, including the gate
verification fixtures. Installed only by forgefirm-image-dev, with the bench
scripts under /usr/share/forgetest/bench.
ScottW514