/mode reports controller=running at the spawn, so the reference dump
raced grblHAL's init writes and captured the supervisor's motion-probe
values (motor_lock 0, step_freq 10000, y_mode at the module default)
instead of the resting state. boot_reference() now waits for the
controller's markers (step_freq/motor_lock/y_mode at their fixed values,
bounded 20 s, GRBL mode only) plus a 1 s settle before dumping, retakes
a saved reference that shows the pre-config state while the boot is
still fresh, and marks it otherwise. Tests cover the wait, its timeout,
the non-GRBL no-op, the pre-config recognition and the retake.
The lid lamp now has a resting policy in forgectrl (lid_lamp_idle,
default 236, asserted at start and at every spawn), so the baseline
expects it there instead of preserving whatever level a boot left, and
forgectrl.settings-bounds proves it: resting at the setting, 256 / -1 /
'bright' refused, a new level applied to the lamp at once, the cleared
key back to the default. Clearing a key goes through the query-string
form (an empty JSON value reads as no setting).
motion.liveness-probe adds the regression the bench needed: with every
axis masked (cnc/motor_lock=15, as a bench tool may leave it) forgectrl
is restarted and its fresh probe must read MOTION OK on the first try -
the probe unmasks the axes itself - and the controller comes up with the
mask cleared. Bench 2026-08-16: MOTION OK at p2p 2047/1341 against the
800 threshold, no ladder.
The baseline's settle no longer counts 'probe verified, spawn pending' as
settled (the post pass ran between the probe's own writes and the
controller's init writes and mis-flagged motor_lock/step_freq): it waits
for the controller to be running, with a bounded allowance for a respawn
backoff.
cloud.mode-switch took the optional connect-time firmware probe file as
the evidence of a live session and failed on a bench where that check is
off; the evidence is now gfcloud's own authenticate/ws-connect lines in
the unified log after the switch, the probe recorded when present. Cloud
mode's connect clears the kernel position counters at the head's start
and its hunt homes the head to the corner: the test tells the runner the
counters were re-zeroed (Context.counters_rezeroed) and jogs the head
back by the counter-measured displacement, and hands the lid lamp back
at the level it found. cloud.gfhome-homing documents that it leaves the
machine homed at the corner.
Baseline: a displaced head is jogged back along its own path by the
kernel-measured X/Y delta through the GRBL controller (bounded 100 mm,
waits out a controller respawn backoff); Z is never touched.
A baseline pass brackets every test and bench tool: before the run the
machine is verified against the fresh-boot idle state and anything off it
is restored; after the run - pass, fail, or abort - it is restored again.
Fixed items are the resting values the boot establishes (module defaults,
forgectrl's start-up writes, the GRBL controller's init writes) and
forgectrl's idle picture (controller running with motion verified, no
diagnostic, camera and cooling engines idle); preserved items (lid lamp
level, position counters, settings map, controller mode) are captured
before and handed back after. Deviations are leftovers: in the run pane,
in the result's evidence, and on the page - attributed to the previous run
when found before, to the run itself when found after.
forgetest takes a fresh-boot reference once per boot (within ten minutes
of boot, after the supervisor settles) as the session's resting lid-lamp
level and the check on the fixed values; the values were confirmed
against a fresh boot of the dev image on the bench (step_freq rests at
28160, the controller's default tick, not the probe's 10000).
Takeover runs capture the controller-owned kernel attributes on entry and
write them back before forgectrl restarts: the bench found the kernel
tests leaving motor_lock=15 behind, which masked the supervisor's
liveness probe - no motion by construction, a false driver-wedge verdict,
the rail-off ladder, and finally motion-fault. The takeover wrapper also
waits for the supervisor to settle on both sides (moved into baseline).
Catalog consequence: none beyond the runner; the tests' own drills are
unchanged.
ScottW514