BRINGUP describes the present: the 54-test catalog and its seven-test
always core, the tier counts, the shipped low-temperature gates, the
density floor ($35 = 10), the two local core commits, the ffboot env
write, the aa-offset route, the current bench image, and the bench
measurements the audit asks for (pooled into the next session). The
workstation shell notes and every em dash are gone.
forgetest: the takeover waits for the cloud client too (found by its
command line); the unauthenticated /boot probe names the endpoint's
parameter; the UI prose is American English. Recipes: forgetest
fetches its package directory and init script only and drops
__pycache__ at unpack; the dev image no longer re-adds forgectrl; the
release image's remove list drops the gfui-client the BSP no longer
has; the platform identity strips the kernel's local-version hash
from the modules directory name, so a re-patched kernel keeps its
fingerprints. grblhal restart is stop then start. release.sh --dev
packs the dev image. fixture.sh refuses a readable env file.
Bench tools: the live-fire drills measure the lid-IR baseline before
every run and point at the fire-watch thresholds the engine reads;
one thermistor conversion (gfbench.degc) serves every drill; the six
dated measurement records leave the tool directory; feeder.c names the
two sysfs writes its caller makes.
Host tests: forgetest 258 pass; the coverage lint reports no uncovered
path across 54 tests. Acceptance: forgectrl.auth covers the /boot
probe; update.* cover ffboot and the manifest identity; the runbook
and bench-tool changes have no catalog consequence.
The recipe URLs, the release and install URLs, the vendor check and the CI checkouts name openglow-org, and the grblHAL core fork is openglow-org/grblHAL-core. No catalog change is owed: the recipe edits move the meta-forgefirm content hash, which every test fingerprint folds in through the platform block, so the whole catalog re-runs on its own.
INSTALL.md, SERIAL.md, docs/COOLING.md, docs/LIGHTBURN.md,
docs/MOTION.md, docs/SAFETY.md, docs/UPDATE-SYSTEM.md, docs/VIDEO.md and
their images are pages on https://docs.forgefirm.org/ now. Every
reference in the README, BRINGUP, the kas config, the cold-build
workflow, forgetest, and the bench scripts points to the site page. The
README carries the beta banner. docs/ keeps BRINGUP.md and
CAMPAIGN-LOG.md.
No catalog consequence: the deleted files are documents, and the code
changes are comment and help-text repoints only.
The documentation site, docs.forgefirm.org, is the one home for the
developer documentation. BUILD.md, kas/README.md, and docs/ACCEPTANCE.md
are on the site under Developers, and they are deleted here. Every
reference points at the site: README.md, BRINGUP.md, UPDATE-SYSTEM.md,
the kas configuration comments, release.sh, the CI workflow comments, and
the releases, forgetest, and bench READMEs.
BRINGUP.md: "Next work" item 16, step timing under CPU contention, is
closed; the video work resolved it. The items after it are renumbered.
CAMPAIGN-LOG.md records the closure.
Documentation and comments only. No layer content changes, so the
manifest identity of the next image does not change. No catalog
consequence.
kas/README.md keeps the build, lockfile, pin and release procedure and a
short build-time facts list; its push/release checklist and Scarthgap
migration backlog are archived verbatim in CAMPAIGN-LOG ("Superseded
status notes"). The real-time argument (PREEMPT, why PREEMPT_RT is not
selectable or needed) joins the BRINGUP hardware facts bank next to the
ring measurements it rests on; the camera pointers go to the 0011-0013
patch headers; the image recipe's gfui-client comment drops its README
pointer.
Docs and a recipe comment only; no catalog consequence.
Add a "What this costs" banner to the README and INSTALL, below the
in-development notice. It states that the firmware is free in both
senses, that nothing is paywalled or held back, that the work happens in
public, and that anyone who wants to verify it can read the licenses and
the commit log instead of taking a stranger's word for it.
The banner also warns that a build bought from a third party is that
party's build, not this project's: unreviewed code driving a laser.
Documentation only. No behavior change, so no acceptance catalog
consequence.
The repo is public and the install path is fully written up, so a reader
who finds it can follow INSTALL.md end to end without ever learning that
the release it depends on does not exist. The banner sits directly under
the title in both documents: no images are published, nothing here is
installable, and anything found elsewhere claiming to be a ForgeFIRM
image did not come from this project.
Documentation only - no behavior change, so no acceptance-catalog
consequence.
docs/VIDEO.md is the user-facing camera guide: what the endpoints return, what
the sensors can do that ForgeFIRM does not send and why, the privacy gate, and
the state of 8 MP support.
The 8 MP (OV8856) capture path now reaches the sensor's full 3264x2448 frame.
Its stock RAW10 full-resolution mode runs the link at 1.44 Gbps/lane and the
i.MX6 CSI-2 D-PHY stops at 1 Gbps; the BSP adds a RAW8 mode that carries the
same frame at half the rate, so an HD machine is no longer limited to the
binned quarter-pixel mode. kas/README.md carries the reasoning, the register
deltas and the factory configuration to fall back to if the receiver will not
lock at 720 Mbps/lane.
Acceptance: camera.sensor-profile expects the new OV8856 geometry, the camera
covers map names src/camhealth.* (the src/cam.* glob does not match it, so the
lint would have gone quiet on an uncovered file at the next pin bump), and a
new auto test camera.frame-health asserts a burst of captures with no frames
the capture queue flagged errored - a real signal about the camera ribbon even
though those frames never reach a client.
Two pages aimed at someone who owns the machine rather than works on it,
written for the documentation site. Nothing here is new behavior - it is
the behavior the machine already has, explained where an owner can find
it instead of spread across a kernel contract, a services contract and
three driver headers.
MOTION.md follows one thread: everything physical comes out of a single
fixed-tick byte stream, so the page starts there - the byte layout, speed
as step density rather than clock, the ring and the two ways to fill it,
and the hardware's own stop, halt and resume-with-waypoint. The laser is
presented as part of that stream rather than beside it, which is what
makes the three contract rules (power before fire, no consecutive power
bytes, end dark) and the persisting duty legible instead of arbitrary.
Then geometry and limits, device ownership and the liveness check the
operator sees, and the two modes in full: GRBL from connection through
the arming sequence, the stop/pause/fault table and homing-or-not; cloud
from the preloaded pulse file through the pause backtrack, the park that
ignores the lid, and the ring's cap on job length. A comparison table and
the motion-related settings close it.
COOLING.md explains the engine as what it is - one owner of the thermal
hardware answering a single question for whichever controller runs - and
gives the reasons behind the numbers rather than just the numbers: why
the flow check heats and measures the downstream rise, why 40 percent is
the duty (below it, convection mimics flow), why the settle gate uses a
split-half mean instead of peak-to-peak, and why one bad reading is a
suspicion rather than a fault. Over-temperature, the two diagnostics
tools and when to run them, the settings, and a situation-to-response
table. The fire watch is described honestly: the lid IR channels are
first of all a photometer for the lid lamp, the gate ships watch-only,
and it is not a fire alarm.
Both pages state what is not implemented - low-temperature gates, TEC
control, a fire watch that acts, limit-switch homing - so nobody plans
around them. Constants come from the sources that own them (the feeder
contract, cool.h, the board header, the services contract), not from
prose. README links both.
Documentation only, no behavior change and no catalog consequence: docs/
is outside every layer and .md is excluded from the layer content hash.
scripts/acceptance-gate.py recomputes every catalog test's domain fingerprint
from /etc/forgefirm-manifest.json inside the release rootfs and requires the
committed releases/v<version>/acceptance.json to carry a matching PASS
(inherited results not core and newer than the invalidate epoch; the artifact
self-hashed; the catalog identical to the tree). release.sh runs it after the
build and stages the artifact as a release asset; FORGEFIRM_ACCEPTANCE_SKIP=1
bypasses loudly. scripts/manifest-from-tree.py builds the same manifest from
the recipe pins with git for CI and the workstation; forgetest-ci.yml runs the
unit tests and enforces the coverage lint (every manifest path covered by some
test). docs/ACCEPTANCE.md is the contract; the coverage currency rule and the
status live in BRINGUP.
rsyslog replaces busybox syslogd/klogd (VIRTUAL-RUNTIME_base-utils-syslog,
trimmed PACKAGECONFIG) and becomes the only log writer: the appended
/etc/rsyslog.conf sets the inputs and the ff_line format and includes
the per-logger rules that `forgectrl --render-syslog` renders from the
machine settings at boot. forgefirm-logrotate becomes forgefirm-logging:
render before rsyslog starts (S19), sweep the pre-syslog log files into
/data/forgefirm/legacy-logs once, and rotate the tree at boot and hourly
by rename + HUP instead of copytruncate. Pins bumped to the pushed
forgectrl (syslog emitter, Logs tab, export), grblHAL-glowforge (syslog
emitter) and python3-gfhardware apps (syslog handlers, capture dir);
the CI harnesses set FFLOG_STDERR=1 so failure diagnostics keep the
controller's log lines. BRINGUP carries the bench validation checklist
(Next work item 14); this is an image change and rides the next flash.
docs/SAFETY.md documents the control board's laser safing chain as
reverse-engineered and bench-verified - parts, every net with its SoC pin,
Linux exposure and polarity, the logic, and the software layers ForgeFIRM
stacks on it - with docs/img/safety-chain.svg. Linked from the README.
BRINGUP: Next work item 11 records the interlock-latch finding (an open
loop never tripped the latch; the kernel now drives INTERLOCK_LATCH_RESET)
and the charge-pump watchdog readback, both code-complete and pinned,
bench validation on the next image.
- kas/README.md: the real-time rationale rests on the feeder's bounded
queue depth, not ring size; the ring is 16 MiB (~84 s at 200 kHz,
~28 min at the 10 kHz cloud tick), a capacity for cloud-mode preload.
- BUILD.md, kas config, release checklist, cold-build workflow: only
forgefirm and meta-openglow (branch scarthgap) are cloned as
siblings; every ForgeFIRM source repo is fetched by pinned SRCREV.
- UPDATE-SYSTEM.md reads as the present-state design: the cloud-mode
compatibility baseline is the cloud client's configured firmware
version, not release metadata; decisions and open items listed
plainly.
- README.md states what GRBL mode still needs the Glowforge service
for (camera-referenced homing) and what runs without it.
- BRINGUP.md: generic build-host and fwup-lab references, the retained
reproductions of the no-fire drill, the System tab.
- LIGHTBURN.md: the arm-window timeouts are machine settings.
- forgefirm-image.bb describes forgectrl as the machine-services
daemon and points at the right backlog entry.
- American spelling throughout.
- LIGHTBURN.md: mandatory "Before you cut" safety section; the
walkthrough now reflects the firing machine (dry runs need the
layer output off or M5; live first-cut instructions); the homing
entry documents homing_mode and the gfcloud method; the machine
address is a placeholder.
- README.md: condensed safety section linking the full text and the
regulatory notes.
- INSTALL.md: "Regulatory and legal" section ahead of the install
steps; routine updates route through the panel updater rather than
the installer.
- BRINGUP.md: the release signing key is described as held offline
(no on-disk path); bench address and credential notes removed;
Next-work item 7 corrected (the installer embeds the production
release key); status entry for audit remediation Phases 0-1; the
GATE A kernel drills join the pending image-flash checklist.
- bench scripts: the target host comes from GF_HOST (or argv) instead
of a hardcoded address.
- laser_stream_test.py: per-session controller runs with a hermetic
cooling-verdict publisher; new assertions that every stream
terminates with FIRE clear (including M3 held to stream end) and
that no FIRE bit rides a zero-step gap; a cycle-churn session
exercises the stop/start seams.
Audit findings D-1, D-2, D-3, D-5, D-10, D-12, B-10, and the harness
half of D-4/G-1.
README: replace the stalled REST/GUI roadmap with what the firmware does -
GRBL mode over TCP for LightBurn/UGS/cncjs, optional cloud mode, the web
control panel, cameras, A/B install beside the factory firmware - plus the
supported hardware incl. the 8 MP camera limitation and a real roadmap.
kas/README: xvclk is the board's 24 MHz oscillator; the pin/push rule covers
every source repo; camera and motion sections are hardware-validated, with the
OV8856 caveat spelled out; the device-tree item closes with the control_12v
residue named; forgectrl is the machine-services daemon with two supervised
controllers.
LIGHTBURN.md: drop the pre-first-light status line.
BUILD.md: state the NXP firmware licensing and where the EULA lives on the
machine. The image now installs firmware-imx-lic, so the EULA text ships beside
the VPU/EPDC blobs it covers; a bbappend declares that package at parse time,
which is what makes it installable from an image recipe.
ScottW514