forgectrl 161686f adds the head-accelerometer crash watch (two tiers
on the LIS2HH12's interrupt generators, armed inside the laser's
armed window). The catalog grows cooling.crash-watch-plumbing - the
unarmed half of the watch provable without a button press: accel_watch
stays at watch through an unarmed session, three zeros read as the
three crash gates off, an out-of-range threshold is refused - and
_COOL_COVERS widens to src/accel.*. The armed-tier bench drill is a
BRINGUP next-work item.
The de-risk drill script's CTRL7 write moves from bit 0 (4D_IG1) to
bit 2 (LIR1), the latch the datasheet actually puts there; the drill's
findings did not depend on latching (a continuous gravity signal).
The captured pulse headers carry the factory's IG programming: hunts
off, travels abort-only (HAar=133 at +/-4 g), the cut alert-only
(HAxr=132, HAyr=112), Z and idle never armed. The factory abort value
itself rules out an FS/128 LSB (4.16 g would sit over the measurable
range), and two Z-only bench windows bracket gravity between
thresholds 100 and 150, which only FS/256 explains. The drill script's
printed g conversion is corrected, and the stale motion-profile
reading of HAxr/HAyr/HAar as accel limits is corrected in the facts
bank.
No catalog consequence: a bench script's printed conversion and the
docs record; no shipped behavior changes.
The de-risk drill ran on the bench: the IG registers program and poll
over i2c-dev (I2C_SLAVE_FORCE) with st_accel bound, raw reads intact,
so the crash detector is forgectrl-only (BRINGUP item 6, CAMPAIGN-LOG
2026-08-31). The drill found the IG needs a running ODR: st_accel
leaves the part in power-down between one-shot reads. The script now
saves CTRL1, runs the window at 800 Hz, and restores it on exit; its
old ODR test checked the axis-enable bits instead of the ODR bits.
No catalog consequence: the change is a bench drill script, its bench
page text, and the docs record of the drill; no shipped behavior
changes.
accel_crash_probe.py arms the head LIS2HH12's on-chip interrupt
generator (IG_CFG1/IG_THS/IG_DUR1) and polls the latched IG_SRC1 for a
strike, reporting the axes and raw magnitude. It settles the bench fact
the crash detector rides on: coexist mode reaches the IG registers over
i2c-dev with I2C_SLAVE_FORCE while st_accel stays bound, so it proves
whether the detector can be forgectrl-only with the liveness path
untouched, or whether the accel must move under glowforge.ko. It touches
only the IG registers (0x30-0x35) plus the CTRL7 latch bit, never the
full scale, so st_accel's raw scaling is undisturbed; no emission, no
commanded motion by default.
Registered on the bench page (dry, board) and in the bench README.
BRINGUP item 6 now stages the drill as the committed first step, with
the readout path, per-state thresholds and the two-tier wiring owed
after it. Tooling only: no shipped component source changed, so no
acceptance-catalog consequence (the detector feature gets its case when
it is built); the bench registry test and coverage lint pass.
ScottW514