-l inventories every bootable partition (SD, eMMC slots 1/2, legacy
p4) as machine-parsable key=value lines: firmware type
(forgefirm/factory), version, kernel presence, booted/next markers,
plus the saved-env selection - the shared probe for the installer and
the forgectrl update manager.
Boot switching now writes all four selection variables (mmcdev,
mmchwpart, mmcpart, mmcroot) in one fw_setenv -s transaction and
read-back verifies, falling back from the libubootenv script format
to the classic u-boot-tools format to per-variable writes - the same
script works on factory firmware and ForgeFIRM. mmchwpart was
previously never set and a mixed env could survive a mid-flip power
cut. Switch targets must pass a content probe (rootfs mounts, kernel
present) unless -f. -e picks the newest factory slot by probing,
excluding slots occupied by ForgeFIRM.
The new ffboot recipe installs it as /usr/sbin/ffboot with
/etc/fw_env.config (factory-identical redundant env layout at eMMC
0x80000/0x82000) - previously the image shipped fw_setenv with no
config. Added to forgefirm-image.
The release image now targets the 200 MiB factory eMMC slot: content
plus 40 MiB working space, hard build failure past the slot size. The
raw ext4 is deployed alongside the wic; scripts/mkfw.sh packs it into
a signed .fw with factory-pattern upgrade.a/upgrade.b tasks. fwup
1.16.0 recipe (applies ForgeFIRM and Glowforge-signed archives on
device) is installed in both images. Dev images stay SD-sized with a
256 MiB working margin and no ceiling.
Verified on the 20260808153331 build: release ext4 180.8 MiB; signed
.fw applies byte-exact with fwup 1.16.0 and with the factory's 0.14.2
(raw-format pubkey), and 0.14.2 -V verifies the signature.
Every image writes /etc/forgefirm-version and echoes "ForgeFIRM
<version>" on the serial-console login prompt (/etc/issue, beneath the
OpenGlow banner) and at SSH login (motd). Release images carry
v${FORGEFIRM_RELEASE}; the dev image stamps the build timestamp - the
same DATETIME as the artifact name - tagged (dev) so a bench machine
is never mistaken for a release.
New recipe installing /usr/sbin/gfhome.py and /etc/gfhome.conf.sample
(copied to /data/etc/gfhome.conf on first run). The runner signs the
machine in with its fused identity, opens the WSS control channel with
a held client reference (a clean disconnect is impossible through
ws_connect), and drives the GFUIService dispatch table itself - minus
print - so the service's camera homing sequence (settings -> hunt ->
lid image -> corner move -> lid image) runs against the real hardware
Machine. The service ends the sequence silently, so completion is a
hunt plus at least one motion followed by a configurable quiet window;
the lens is then re-referenced against the hall sensor for a
deterministic Z. Lid/e-stop are checked before the session, print
actions are refused, and exit codes distinguish configuration and
connection failures from an incomplete homing.
Installed in both images; invoked by the grblHAL controller for $H
when homing_mode = gfcloud in /data/forgefirm.conf.
gitsm-pinned build of the controller with a sysvinit script (defaults 92, after forgectrl), installed in both images. Reboot-verified on the bench: controller and forgectrl come up unattended and Grbl answers on TCP:23.
Sources live at github.com/ScottW514/forgectrl (history extracted, layout src/ + init/); the recipe pins SRCREV and installs the init script from the repo. Adds the build-forgectrl.sh bench cross-compile script.
The dev image required the shared glowforge-image base directly, so it
was not a superset of forgefirm-image (it lacked v4l-utils, audit N12).
Require forgefirm-image and add forgectrl + debug tooling on top.
v4l2-ctl (alongside the already-present media-ctl) configures the
imx-media pipeline and grabs raw frames from /dev/video4 while the
gfhardware capture path is ported off the factory NXP V4L2 model.
gfui-client connects to Glowforge's servers; ForgeFIRM replaces it with a
local grblHAL controller (forgectrl). Remove it from the image via an
override, leaving the shared glowforge-image base untouched.
ScottW514