The faultpos live-fire drill armed and commanded a cut at an origin it
called stale to test a refusal the design decided not to gate: its only
outcome was an emission at an unknown position. Removed from the script
and the bench page.
live_fire_drills.py discarded every drill's return value, so the bench
page recorded a failed live-fire drill as OK. The exit status is the
drill's.
laser_pgood is the supply's power-good, high on every healthy machine;
fire_test.py and the K3 drill aborted on it and pgood_probe.py inverted
it. The latch-unlock drills now gate on the safety chain holding HV off
(charge-pump watchdog dead, pulse engine idle), as the kernel suite
does, and the probe reports the pin as the kernel publishes it.
motion.deadman: the controller resumed from its hang recovers on $X and
moves again without a restart (the stream's fault acknowledgment).
gate_a_kernel_drills.py stages the three remaining GATE A kernel
drills (controlled-stop deceleration floor, resume waypoint with the
latch locked, mid-ramp latch unlock) with software witnesses and the
PSU-connector scope point. lid_ir_ambient_baseline.csv is the
fire-watch ambient anchor (600 samples, lid closed, machine idle);
BRINGUP records the baseline statistics and the idle verification of
the emission/fire/HV evidence plumbing.
ScottW514