On the bench the head accelerometer's sysfs read lands two or three
samples in a one-second jog leg, and two samples on the constant-velocity
stretch read near idle with the head in full flight: the accelerometer
sees the ramps, not the travel. The first unattended queue on dev image
20260822204234 failed motion.jog-roundtrip on that (2 of 8 legs judged)
with the head plainly moving where a ramp was caught (p2p 3019, 1330,
1698, 1663). The verdict is now over the sequence: p2p across all the
legs at or above the liveness threshold, and motion on at least two
distinct legs (one jolt is not a gantry moving on every jog); the
sampler must have landed samples at all. Rerun: p2p 2897 over 17
samples, motion on 3 legs, PASS; the whole unattended queue passed (15,
then 9 re-required by the module hash) on that image.
camera.snapshot's PASS line names the half-res frame it compared (the
full-res size had been printed in its place). AccelSampler gets host
tests over a fake iio tree.
A campaign asked a person for about eighty things: lid, button and
interlock actions, app jobs, and sixteen confirmations by eye, most of
them as popups to read and answer while the head was already moving.
This is the forgetest-only step of cutting that down.
The operator channel. A test asks for its operator's part in four ways:
ctx.ready() pre-announces a timed step and waits for the click that
starts it; ctx.notice() is a standing instruction with no button, the
test watching the machine for the result; ctx.act(channel, state) is a
machine action by name (lid, interlock, button) - a notice for the
operator today, proven done by the switch reading or an `until`
condition, recorded in evidence.actions with who performed it, and the
seam a bench actuator plugs into through runner.fixture; ctx.confirm()
stays for the yes/no the evidence cannot answer. Tests declare
`actions`; a `precheck` refuses a start the machine cannot honor (a
reason, no result, a queue skips it and carries on).
The page shows what you will do before it is asked: the running test's
steps, a queue's attended tests still waiting, or the test whose title
you clicked while idle; notices and prompts sit under it. The campaign
card no longer carries baseline, queue and leftover notes: those go to
the runner journal (daemon.log, syslog as `forgetest`, and the run in
progress), with a Runner journal button in the footer.
The catalog, 43 tests (27 auto, 8 operator, 8 live; was 45: 25/12/8):
cloud.mode-switch absorbs cloud.hunt-lid-open and cloud.gfhome-homing
(the connect made with the lid open, the hunt judged lid-open with its
Z cycle, the re-hunt waited out after the close, the switch back, then
$H judged by gfhome's own "homing complete" line with its motion
windows; precheck homing_mode = gfcloud). kernel.fire-line is auto with
the HV-not-good precheck, camera.snapshot is auto (a second frame with
the lid lamp off differs and is smaller), motion.jog-roundtrip is auto
(the head accelerometer per leg, the supervisor's own witness). The
remaining attended tests use Ready gates and act(); the head's beam
detector and the button LEDs replace the eye, leaving two confirms: the
emission witness's mark and the app's display in cloud.pause-resume.
Proof: tests/test_operator.py (the channel, the precheck, the journal),
the cloud replays re-targeted to the merged round trip over a fake grbl
and the bench excerpts, 196 host tests green, coverage lint 0 uncovered.
Every re-ported attended test is owed one bench run on the next dev
image (BRINGUP). Catalog consequence: the merged and reclassified
tests' implementation hashes move; nothing else is invalidated.
ScottW514