Fan floors from the measurement; a hunt is measured, not judged

forgectrl pin 47e4256: the airflow floors set from the bench measurement
(exhaust 6400, intake 2290, air assist 6000 rpm, purge current 300, grace
15 s) and the operating-point rule: a fan is judged while the laser is
armed, when a job's profile may raise it but never lower it below the run
duty, or whenever it is commanded at the run duty; the service's hunts,
sent with the extraction fans off, are measured and published unjudged.

Catalog: cloud.mode-switch now waits out the connect-time hunt sampling
/cool/status and requires no AIRFLOW, the exhaust row unjudged and the
exhaust actually off; its covers gain forgectrl src/cool.* and
src/airflow.*. cooling.fan-gate-trips uses an 8 s test grace (the
intakes take 7 s to 90 percent and tripped under the old 2 s at the new
floor) and its off leg waits for the row state as well as gates_off.
fan_floor_measure.py names a reply that is not JSON and calls the purge
readings idle and run (the pump is always on).

Docs: COOLING 3a and the settings table, BRINGUP item 19 and a facts-bank
entry with the measured fan speeds, the bench README, and a CAMPAIGN-LOG
entry for the measurement, the two status-document finds, the hunt find
and the hot-deployed bench runs of both tests.

meta-forgefirm/recipes-forgefirm/forgectrl/forgectrl-pin.inc

@@ -2,5 +2,5 @@
 # only SRCREV and PV here - the image manifest leaves *-pin.inc out of the
 # layer content hash because the component entry already identifies the
 # pinned source (forgefirm-image-manifest.bbclass).
-SRCREV = "50096be4dca74297ae52188960af2704e693f682"
+SRCREV = "47e42569e8def2ed6fe10f61e9ab9ff4f9c8807d"
 PV = "0.1.0"