commissioning: the layer, the acceptance tests, the harness rule, the docs, and the bench drills

meta-forgefirm: the forgefirm-users init replays the account at boot;
sshd refuses root and empty passwords and runs only while the panel
turns it on; the release image keeps an empty root password for the
console; the console banner; avahi announces forgefirm.local; https in
libmicrohttpd and ulfius; the panel on 80 and 443; the license bundle on
the rootfs; release.sh checks the root policy on the built rootfs.

forgetest: the commission suites (commission, commission_dark,
commission_sheet: 23 cases); the runner turns cloud mode on with the
typed phrase for a test that declares it; the baseline's motor_lock is
0; the log-export test checks the bundle for the camera key; the record
helpers write bytes as given and join the daemon's paths as POSIX. The
stream harness gains rule 24: a hold verdict is held again after a
resume. Bench drills: lens_travel.py and lens_stop_accel.py.

Docs: BRINGUP carries the present state; CAMPAIGN-LOG carries the dated
record.

meta-forgefirm/recipes-connectivity/openssh/openssh_%.bbappend

@@ -0,0 +1,39 @@
+# ForgeFIRM SSH policy, set in the installed files so the release image
+# carries it as built:
+#   PermitRootLogin no          root logs in at the serial console only
+#   PermitEmptyPasswords no     an account without a password cannot log in
+#   PasswordAuthentication yes  operator accounts log in with a password
+# The dev image's debug-tweaks turns PermitRootLogin and
+# PermitEmptyPasswords back to yes at rootfs time (ssh_allow_root_login
+# and ssh_allow_empty_password in rootfs-postcommands.bbclass match the
+# active lines too), so the bench keeps root over SSH.
+#
+# The init script starts sshd only when the control panel has turned it
+# on (/run/forgefirm/ssh-enabled, tmpfs, gone at reboot) or on the dev
+# image (/etc/forgefirm-dev). The guard sits in check_for_no_start, which
+# start, reload and restart call; stop is never gated.
+
+do_install:append() {
+    for config in sshd_config sshd_config_readonly; do
+        f=${D}${sysconfdir}/ssh/$config
+        [ -e "$f" ] || continue
+        sed -i \
+            -e 's/^[#[:space:]]*PermitRootLogin .*/PermitRootLogin no/' \
+            -e 's/^[#[:space:]]*PermitEmptyPasswords .*/PermitEmptyPasswords no/' \
+            -e 's/^[#[:space:]]*PasswordAuthentication .*/PasswordAuthentication yes/' \
+            "$f"
+        grep -q '^PermitRootLogin no$' "$f" \
+            && grep -q '^PermitEmptyPasswords no$' "$f" \
+            && grep -q '^PasswordAuthentication yes$' "$f" \
+            || bbfatal "$config: the ForgeFIRM policy lines did not land"
+    done
+
+    init=${D}${sysconfdir}/init.d/sshd
+    sed -i '/^check_for_no_start() {$/a\
+    [ -e /run/forgefirm/ssh-enabled ] || [ -e /etc/forgefirm-dev ] || {\
+        echo "sshd: not enabled (turn it on from the ForgeFIRM control panel)"\
+        exit 0\
+    }' "$init"
+    grep -q 'forgefirm/ssh-enabled' "$init" \
+        || bbfatal "init.d/sshd: the check_for_no_start anchor was not found"
+}