From 74fa8a4ee6d35c9f6daa677831536aade428fd67 Mon Sep 17 00:00:00 2001 From: ScottW514 Date: Wed, 9 Sep 2026 07:01:15 -0400 Subject: [PATCH] Update README --- README.md | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/README.md b/README.md index efc14ec..f2c4575 100644 --- a/README.md +++ b/README.md @@ -35,23 +35,6 @@ truth for every fact about the machine and the firmware. | Downloads | [Releases](https://github.com/openglow-org/forgefirm/releases) | | Questions | [Community forum](https://community.openglow.org) | -## What it does - -Two controller modes, selected in the web panel and switchable while the -machine is idle. **GRBL mode** runs grblHAL on the machine, speaking Grbl 1.1 -over TCP port 23, so LightBurn, UGS and cncjs drive the laser directly; motion -runs on the board's own hardware step engine, fed live by a local planner. -**Cloud mode** signs in to the Glowforge web service as itself, so the phone -and web apps work as they always did; it is optional and off by default. -Around both sits a local web control panel: status and position, coolant and -fan telemetry, safety-switch states, a live camera stream, settings, hardware -diagnostics, firmware updates and boot-slot management. - -The control board is common to the Basic, the Plus and the Pro, and one image -covers every model. The 5 MP camera is hardware validated; the 8 MP camera of -an "HD" machine has a complete path that has never run on one -([Cameras](https://docs.forgefirm.org/technical/machine/cameras/)). - ## Build ```sh