From 624f5ea11b7e7993a4ed068729d9b6219fef0b6a Mon Sep 17 00:00:00 2001 From: ScottW514 Date: Thu, 6 Oct 2022 10:11:09 -0400 Subject: [PATCH] Update INSTALL.md --- INSTALL.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/INSTALL.md b/INSTALL.md index 4791c9b..5d8d26c 100644 --- a/INSTALL.md +++ b/INSTALL.md @@ -6,7 +6,7 @@ The factory flash is a 4GB eMMC. The factory firmware resides on two partitions We can resize the ```/data``` partition down to 2GB, leaving a ~1GB partition for us to install OpenGlow on. ## Prerequisites -Before getting started, you will need serial console access to your Glowforge. If you do not have a unit with the factory installed, you will need to install your own. +Before getting started, you will need [serial console](https://github.com/ScottW514/forgefirm/blob/master/SERIAL.md) access to your Glowforge. If you do not have a unit with the factory installed, you will need to install your own. You should also have followed the initial Glowforge [setup instructions](https://glowforge.com/support/topic/unboxing-setting-up/unboxing-and-setting-up-your-glowforge), and have your unit connected to your wireless network.