forgetest: cooling.intake-one-fan, and setup.check-airflow reads the intake fan count

forgectrl c274f19 adds cool_intake_fans: at 1, a machine built with one
intake fan, the second intake is published not fitted and never judged,
and the setup's airflow check writes the count it finds.

cooling.intake-one-fan, in a suite module of its own, proves both halves
on a machine with two intake fans with the setting alone. With
cool_intake_fans 1 and an 8 s grace, a session at the cut fan profile
must publish intake_2 as not fitted with no floor while it reads a real
speed, run OK, and judge intake_1 ok at the intake floor; with the intake
floor at its legal maximum it must trip AIRFLOW (hold, fire blocked) with
intake_1 TRIPPED and intake_2 still not fitted, and the fault must end
with the session; restored, every fan reads ok at its floor. It starts
only from a machine with both intakes judged, requires
cooling.fan-gate-trips, and puts the count, the intake floor and the
grace back as found on every exit path.

setup.check-airflow now reads the count from the result: 2 needs all
four fans at least 1000 rpm, 1 needs intake 2 reported {"fitted": false}
and the other three ok; either way the setting must read what the check
found, and the count is put back with the five floors.

Fingerprints: the new test has a module of its own, so no cooling test
moves; the setup.check-airflow edit is inside its function. Diffed across
the change: 127 -> 128 tests, one added, setup.check-airflow the only
one moved.

Proof: the touched host tests pass (test_cooling_intake_suite 4,
test_setup_dark 10, test_cooling_suite 25) and pyflakes is clean.
test_cooling_intake_suite replays the test against a scripted engine,
and two broken engines fail it with the settings put back: one that
ignores the setting, and one that takes intake 1 out with intake 2.
test_setup_dark's new AirflowCheckTests take a two-fan and a one-fan
result, and fail a count the setting does not match and a result with
no count. On the bench reference, image 20260928194539 (dev) with these
files and forgectrl c274f19 bind-mounted, cooling.fan-gate-trips,
cooling.intake-one-fan and setup.check-airflow pass with a clean
baseline before and after each (forgectrl's commit has the readings).

forgetest/forgetest/suite/__init__.py

@@ -15,6 +15,7 @@ from . import setup_sheet  # noqa: F401,E402
 from . import logs       # noqa: F401,E402
 from . import motion     # noqa: F401,E402
 from . import cooling    # noqa: F401,E402
+from . import cooling_intake  # noqa: F401,E402
 from . import laser      # noqa: F401,E402
 from . import camera     # noqa: F401,E402
 from . import update     # noqa: F401,E402

forgetest/forgetest/suite/cooling_intake.py

@@ -0,0 +1,113 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
+"""cooling.intake-one-fan - a machine built with one intake fan
+(cool_intake_fans 1, which the setup's airflow check writes): the second
+intake tach is published as not fitted and never judged, and intake 1
+still holds the intake floor. On a machine with two intake fans the
+setting alone proves both halves: intake 2 turns and is not judged, and
+an intake floor no fan can meet trips with intake 2 still out of it."""
+from ..catalog import test
+from .cooling import _COOL_COVERS, _after_session, _cool, _fan_gate, _run_session, _set_gates
+
+INTAKE_KEYS = ("cool_intake_fans", "cool_tach_intake_min_rpm", "cool_fan_grace_s")
+INTAKE_GRACE_S = "8"        # past the intakes' 7 s to 90 percent, so only the leg's floor trips
+INTAKE_TRIP_WAIT_S = 20     # grace + three ticks, with slack for the 1 Hz pipeline
+
+
+@test("cooling.intake-one-fan", title="With one intake fan set, intake 2 is not judged and intake 1 still is",
+      subsystem="cooling", kind="auto", mode="grbl", est_min=3,
+      covers=_COOL_COVERS + [("forgectrl", "src/main.c")], requires=["cooling.fan-gate-trips"],
+      steps=["Machine idle, fans quiet. The test sets one intake fan, the intake floor and the spin-up "
+             "grace and restores all three; three short M8/M9 cycles spin the fans."],
+      description="cool_intake_fans 1 must take intake 2 out of the airflow gates and leave intake 1 in "
+                  "them. With it set, a session at the cut fan profile must publish intake_2 as not fitted "
+                  "with no floor while it reads its real speed, run OK, and judge intake_1 ok at the intake "
+                  "floor; an intake floor at its legal maximum must then trip AIRFLOW (hold, fire blocked) "
+                  "with intake_1 TRIPPED and intake_2 still not fitted, and the fault must end with the "
+                  "session; restored, the next session judges intake_2 again and every fan reads at or "
+                  "above its floor.")
+def intake_one_fan(ctx):
+    fc = ctx.forgectrl
+    ev = ctx.evidence
+    before = fc.settings()
+    orig = {k: before.get(k, "") for k in INTAKE_KEYS}
+    ev["orig"] = orig
+    ctx.log("original: %s", orig)
+    inl = (before.get("gates") or {}).get("cool_tach_intake_min_rpm") or {}
+    ctx.check(inl.get("gate") == "intake" and inl.get("off") == "low",
+              "settings reply does not describe the intake floor as the intake gate, off at zero: %s", inl)
+    ctx.check(orig["cool_intake_fans"] != "1",
+              "cool_intake_fans is already 1: the test starts from a machine with both intakes judged")
+    c0 = _cool(fc)
+    ctx.check(c0.get("verdict") == "OK" and c0.get("gates_off") == [],
+              "engine is not at OK with every gate on before the test: %s", c0)
+
+    restored = False
+    with ctx.grbl() as grbl:
+        st = grbl.status_report()
+        ctx.check(st["state"].startswith("Idle"), "controller is %s", st["state"])
+        try:
+            # Leg 1: one intake fan. Intake 2 still turns on this machine; it
+            # is measured and published not fitted, and nothing judges it.
+            _set_gates(ctx, fc, {"cool_intake_fans": "1", "cool_fan_grace_s": INTAKE_GRACE_S})
+            c = _run_session(ctx, grbl, fc,
+                             lambda c: c.get("verdict") == "OK" and _fan_gate(c, "intake_1").get("state") == "ok",
+                             "one intake fan leg", wait=INTAKE_TRIP_WAIT_S + 10)
+            g1, g2 = _fan_gate(c, "intake_1"), _fan_gate(c, "intake_2")
+            ev["one_fan"] = {"cool": c, "intake_1": g1, "intake_2": g2}
+            ctx.check(g2.get("state") == "not fitted" and (g2.get("floor") or 0) == 0,
+                      "intake_2 is not published not fitted with no floor: %s", g2)
+            ctx.check((g2.get("reading") or 0) > 0,
+                      "intake_2 reads %s: the test needs a machine whose second intake turns", g2.get("reading"))
+            ctx.check(c.get("verdict") == "OK", "the one intake fan session is not OK: %s", c)
+            ctx.check(g1.get("state") == "ok" and (g1.get("floor") or 0) > 0,
+                      "intake_1 is not judged ok at the intake floor: %s", g1)
+
+            # Leg 2: the intake floor at its legal maximum. Intake 1 is the
+            # one intake left in the gates; intake 2 stays out of them.
+            _set_gates(ctx, fc, {"cool_tach_intake_min_rpm": str(inl.get("hi"))})
+            c = _run_session(ctx, grbl, fc, lambda c: c.get("verdict") == "AIRFLOW", "intake 1 trip leg",
+                             wait=INTAKE_TRIP_WAIT_S)
+            g1, g2 = _fan_gate(c, "intake_1"), _fan_gate(c, "intake_2")
+            ev["intake_1_trip"] = {"cool": c, "intake_1": g1, "intake_2": g2}
+            ctx.check(c.get("verdict") == "AIRFLOW", "an intake floor of %s rpm did not trip: %s", inl.get("hi"), c)
+            ctx.check(c.get("fire_ok") is False and c.get("hold") is True,
+                      "AIRFLOW without fire blocked and a hold: %s", c)
+            ctx.check(g1.get("state") == "TRIPPED", "intake_1 does not read TRIPPED: %s", g1)
+            ctx.check(g2.get("state") == "not fitted", "intake_2 was judged with one intake fan set: %s", g2)
+            ctx.check("intake_1" in (c.get("reason") or ""), "the reason does not name intake_1: %r", c.get("reason"))
+            c = _after_session(ctx, fc)
+            ev["intake_1_trip_after"] = c
+            ctx.check(c.get("verdict") == "OK" and c.get("hold") is False,
+                      "the fan fault outlived its run session: %s", c)
+
+            # Restore, and prove it: intake 2 judged again, every fan at or
+            # above its floor. The restored grace is the shipped one.
+            _set_gates(ctx, fc, orig)
+            restored = True
+            c = _run_session(ctx, grbl, fc,
+                             lambda c: c.get("verdict") == "OK" and not c.get("gates_off")
+                             and all(g.get("state") == "ok" for g in (c.get("fan_gates") or {}).values()),
+                             "restored", wait=INTAKE_TRIP_WAIT_S + 20)
+            ev["restored"] = c.get("fan_gates")
+            ctx.check(c.get("verdict") == "OK" and c.get("gates_off") == [],
+                      "engine did not return to OK with every gate on after the restore: %s", c)
+            bad = {k: g for k, g in (c.get("fan_gates") or {}).items() if g.get("state") != "ok"}
+            ctx.check(not bad, "fans not at or above their floors after the restore: %s", bad)
+        finally:
+            if not restored:
+                st, body = fc.post("/settings", params=orig)
+                ctx.log("restore on failure: POST /settings %s -> %s", orig, st)
+                try:
+                    c = _run_session(ctx, grbl, fc, lambda c: c.get("verdict") == "OK" and not c.get("gates_off"),
+                                     "restore on failure")
+                    ctx.log("restore on failure: engine %s gates_off %s", c.get("verdict"), c.get("gates_off"))
+                except Exception as e:      # the original failure is the one to report
+                    ctx.log("restore on failure: run session did not complete (%s)", e)
+    after = fc.settings()
+    ctx.check(all(after.get(k, "") == orig[k] for k in INTAKE_KEYS),
+              "settings not restored: %s", {k: after.get(k) for k in INTAKE_KEYS})
+    ctx.check(fc.wait_idle(60, abort=ctx.aborted), "machine did not return to idle")

forgetest/forgetest/suite/setup_dark.py

@@ -191,20 +191,28 @@ def check_sensors(ctx):
                             ("forgectrl", "src/gates.c"), ("forgectrl", "src/super.c")],
       requires=["forgectrl.auth", "cooling.fan-gate-trips"],
       description="POST /wiz/airflow/start: the controller stops, the fans run at the cut profile "
-                  "for 35 s, the purge is measured on and off, and five settings are written: the "
+                  "for 35 s, the purge is measured on and off, and six settings are written: the "
-                  "four floors at 55 percent of steady and the grace from the slowest spin-up. Each "
+                  "four floors at 55 percent of steady, the grace from the slowest spin-up, and the "
-                  "fan must read at least 1000 rpm. The five settings are put back as found at the "
+                  "intake fans fitted (2 when both intakes turn; 1 when intake 2 never reads a pulse "
-                  "end, the purge fan is on again and drawing over the floor the check just wrote, "
+                  "and intake 1 passes, and then intake 2 is reported not fitted and the intake floor "
-                  "and the controller must be running again.")
+                  "comes from intake 1). Each fan judged must read at least 1000 rpm. The six "
+                  "settings are put back as found at the end, the purge fan is on again and drawing "
+                  "over the floor the check just wrote, and the controller must be running again.")
 def check_airflow(ctx):
     keys = ["cool_tach_exhaust_min_rpm", "cool_tach_intake_min_rpm", "cool_tach_air_assist_min_rpm",
             "cool_purge_min_current", "cool_fan_grace_s"]
-    with Restore(ctx, keys):
+    with Restore(ctx, keys + ["cool_intake_fans"]):
         last = run_check(ctx, "airflow", lambda p: None, 240)
         r = last.get("result") or {}
         fans = r.get("fans") or {}
+        intakes = r.get("intake_fans")
+        ctx.check(intakes in (1, 2), "the result carries no intake fan count: %r", intakes)
+        ctx.log("intake fans fitted: %s", intakes)
         for name in ("exhaust", "intake 1", "intake 2", "air assist"):
             f = fans.get(name) or {}
+            if name == "intake 2" and intakes == 1:
+                ctx.check(f == {"fitted": False}, "intake 2 with one intake fan: %s", f)
+                continue
             ctx.check(f.get("ok") is True, "%s: %s", name, f)
             ctx.log("%s: %s rpm steady, 90 percent at %s s", name, f.get("steady_rpm"), f.get("spinup_s"))
         floors = r.get("floors") or {}
@@ -213,6 +221,8 @@ def check_airflow(ctx):
         s = ctx.forgectrl.settings() or {}
         for k in keys:
             ctx.check(s.get(k) == floors.get(k), "%s reads %r, the check wrote %r", k, s.get(k), floors.get(k))
+        ctx.check(s.get("cool_intake_fans") == str(intakes),
+                  "cool_intake_fans reads %r, the check found %r", s.get("cool_intake_fans"), intakes)
         ctx.log("floors: %s", json.dumps(floors))
         # The check switches purge air off to read its off current. Leaving
         # it off costs the next job an airflow hold mid-cut, judged against

forgetest/tests/test_cooling_intake_suite.py

@@ -0,0 +1,176 @@
+# Copyright 2026 514 LLC d/b/a OpenGlow
+# Written by Scott Wiederhold
+# https://community.openglow.org
+# SPDX-License-Identifier:    MIT
+
+"""cooling.intake-one-fan replayed host-side under the real runner
+Context against a scripted engine: the fake reads cool_intake_fans and
+the floors at every M8 (the engine reloads at run start), publishes
+intake_2 not fitted with no floor when one intake fan is set, holds every
+fan in grace for the configured seconds, then judges the bench readings
+against the floors. The negative engines are the two ways the change
+could go wrong: the setting ignored (intake 2 still judged) and the
+setting taking intake 1 out with it."""
+import threading
+import time
+import unittest
+
+import helpers
+from forgetest.runner import Context, Failed, Run
+from forgetest.suite import cooling, cooling_intake
+from test_cooling_suite import FakeGrbl
+
+
+class IntakeOneFanTests(unittest.TestCase):
+    READINGS = {"exhaust": 11640, "intake_1": 4157, "intake_2": 4158, "air_assist": 11050, "purge": 625}
+    FLOORS = {"exhaust": ("cool_tach_exhaust_min_rpm", 6400.0, 20000.0),
+              "intake_1": ("cool_tach_intake_min_rpm", 2290.0, 20000.0),
+              "intake_2": ("cool_tach_intake_min_rpm", 2290.0, 20000.0),
+              "air_assist": ("cool_tach_air_assist_min_rpm", 6000.0, 30000.0),
+              "purge": ("cool_purge_min_current", 300.0, 1023.0)}
+    GATE_OF = {"exhaust": "exhaust", "intake_1": "intake", "intake_2": "intake",
+               "air_assist": "air_assist", "purge": "purge"}
+
+    def setUp(self):
+        self.fc = helpers.FakeForgectrl().start()
+        self.grbl = FakeGrbl()
+        self.saved = (cooling.VERDICT_WAIT_S, cooling.SESSION_END_WAIT_S, cooling_intake.INTAKE_TRIP_WAIT_S)
+        cooling.VERDICT_WAIT_S = 4
+        cooling.SESSION_END_WAIT_S = 3
+        cooling_intake.INTAKE_TRIP_WAIT_S = 4
+        self.fc.state["status"] = dict(self.fc.state["status"], gates_off=[])
+        self.fc.state["cool"] = {"phase": "idle", "verdict": "OK", "fire_ok": False, "hold": False,
+                                 "gates_off": [], "fan_gates": {}}
+        for key, _d, _h in self.FLOORS.values():
+            self.fc.state["settings"].setdefault(key, "")
+        self.fc.state["settings"].setdefault("cool_fan_grace_s", "")
+        self.fc.state["settings"].setdefault("cool_intake_fans", "")
+        self.honors_setting = True     # the engine takes intake 2 out with one intake fan
+        self.drops_both = False        # the engine takes intake 1 out with it
+        self.grace_scale = 0.1         # seconds of fake grace per configured second
+        self._describe()
+        self.grbl.on_command = self._engine
+        self.fc.on_post = self._on_post
+
+    def tearDown(self):
+        cooling.VERDICT_WAIT_S, cooling.SESSION_END_WAIT_S, cooling_intake.INTAKE_TRIP_WAIT_S = self.saved
+        self.grbl.close()
+        self.fc.stop()
+
+    def setting(self, key, default):
+        v = self.fc.state["settings"].get(key) or ""
+        return float(v) if v else default
+
+    def _describe(self):
+        gates = {}
+        for fan, (key, default, hi) in self.FLOORS.items():
+            v = self.setting(key, default)
+            gates[key] = {"gate": self.GATE_OF[fan], "def": default, "lo": 0.0, "hi": hi,
+                          "band": [default * 0.9, default * 1.1], "off": "low", "value": v,
+                          "state": "off" if v <= 0 else "ok"}
+        self.fc.state["settings"]["gates"] = gates
+
+    def _on_post(self, path, form):
+        if path != "/settings":
+            return None
+        self.fc.state["settings"].update(form)
+        self._describe()
+        return (200, self.fc.state["settings"])
+
+    def _engine(self, line):
+        self._describe()
+        cool = self.fc.state["cool"]
+        if line == "M9":
+            def end():
+                time.sleep(0.3)
+                cool["phase"] = "idle"
+                cool.update(verdict="OK", fire_ok=True, hold=False, reason="")
+                for g in cool.get("fan_gates", {}).values():
+                    if g["state"] != "not fitted":
+                        g["state"] = "idle"
+            threading.Thread(target=end, daemon=True).start()
+            return
+        if line != "M8":
+            return
+        cool["phase"] = "run"
+        one = self.fc.state["settings"].get("cool_intake_fans") == "1" and self.honors_setting
+        out = {"intake_2"} | ({"intake_1"} if self.drops_both else set()) if one else set()
+        floors = {fan: 0.0 if fan in out else self.setting(key, default)
+                  for fan, (key, default, _h) in self.FLOORS.items()}
+        cool.update(verdict="OK", fire_ok=True, hold=False, resume_ok=True, reason="", gates_off=[],
+                    fan_gates={f: {"reading": self.READINGS[f], "floor": floors[f],
+                                   "state": "not fitted" if f in out else "grace"} for f in floors})
+        grace = self.setting("cool_fan_grace_s", 15.0) * self.grace_scale
+
+        def judge():
+            time.sleep(grace)
+            if cool["phase"] != "run":
+                return
+            for f in floors:
+                if f not in out:
+                    cool["fan_gates"][f]["state"] = "ok" if self.READINGS[f] >= floors[f] else "under"
+            time.sleep(0.3)
+            if cool["phase"] != "run":
+                return
+            for f in floors:
+                if f not in out and floors[f] > self.READINGS[f]:
+                    cool["fan_gates"][f]["state"] = "TRIPPED"
+                    if cool["verdict"] != "AIRFLOW":
+                        cool.update(verdict="AIRFLOW", fire_ok=False, hold=True, resume_ok=False,
+                                    reason="AIRFLOW: %s %d under the %d floor for 3 s - hold, no resume this job"
+                                           % (f, self.READINGS[f], floors[f]))
+        threading.Thread(target=judge, daemon=True).start()
+
+    def run_test(self):
+        run = Run("test", "cooling.intake-one-fan", "t")
+        ctx = Context(run, None, helpers.make_test("cooling.intake-one-fan", []))
+        cooling_intake.intake_one_fan(ctx)
+        return run
+
+    def settings_posts(self):
+        return [f for p, f in self.fc.posts if p == "/settings"]
+
+    def restored(self):
+        return {"cool_intake_fans": "", "cool_tach_intake_min_rpm": "", "cool_fan_grace_s": ""}
+
+    def test_one_fan_then_intake_1_trip_then_restore_pass(self):
+        run = self.run_test()
+        ev = run.evidence
+        self.assertEqual(ev["one_fan"]["intake_2"]["state"], "not fitted")
+        self.assertEqual(ev["one_fan"]["intake_1"]["state"], "ok")
+        self.assertEqual(ev["intake_1_trip"]["intake_1"]["state"], "TRIPPED")
+        self.assertEqual(ev["intake_1_trip"]["intake_2"]["state"], "not fitted")
+        self.assertTrue(all(g["state"] == "ok" for g in ev["restored"].values()))
+        posts = self.settings_posts()
+        self.assertEqual(posts[0], {"cool_intake_fans": "1", "cool_fan_grace_s": "8"})
+        self.assertEqual(posts[1], {"cool_tach_intake_min_rpm": "20000.0"})
+        self.assertEqual(posts[-1], self.restored())
+        self.assertEqual(self.grbl.commands.count("M8"), 3)
+        self.assertEqual(self.grbl.commands.count("M9"), 3)
+
+    def test_an_engine_that_ignores_the_setting_fails_and_restores(self):
+        self.honors_setting = False
+        with self.assertRaises(Failed) as cm:
+            self.run_test()
+        self.assertIn("intake_2 is not published not fitted", str(cm.exception))
+        self.assertEqual(self.settings_posts()[-1], self.restored())
+        self.assertEqual(self.fc.state["cool"]["verdict"], "OK")
+
+    def test_an_engine_that_drops_intake_1_too_fails_and_restores(self):
+        self.drops_both = True
+        with self.assertRaises(Failed) as cm:
+            self.run_test()
+        self.assertIn("intake_1 is not judged ok at the intake floor", str(cm.exception))
+        self.assertEqual(self.settings_posts()[-1], self.restored())
+
+    def test_a_machine_already_at_one_intake_fan_is_refused_untouched(self):
+        self.fc.state["settings"]["cool_intake_fans"] = "1"
+        with self.assertRaises(Failed) as cm:
+            self.run_test()
+        self.assertIn("already 1", str(cm.exception))
+        self.assertEqual(self.settings_posts(), [])
+        self.assertEqual(self.grbl.commands.count("M8"), 0)
+
+
+if __name__ == "__main__":
+    unittest.main()

forgetest/tests/test_setup_dark.py

@@ -137,5 +137,124 @@ class SensorsCheckTests(unittest.TestCase):
         self.assertIn(("/wiz/sensors/abort", {}), [(p, f) for p, f in self.fake.posts])
 
 
+class AirflowCheckTests(unittest.TestCase):
+    """setup.check-airflow's judge against a scripted daemon: the check
+    writes its floors and the intake fans fitted, and the test reads the
+    fans the count says are there. A machine built with one intake fan
+    reports intake 2 not fitted; the bench reference has two."""
+
+    FLOORS = {"cool_tach_exhaust_min_rpm": "6400", "cool_tach_intake_min_rpm": "2290",
+              "cool_tach_air_assist_min_rpm": "6050", "cool_purge_min_current": "345",
+              "cool_fan_grace_s": "12"}
+    FAN = {"steady_rpm": 4150, "spinup_s": 6.8, "ok": True}
+
+    def result(self, intakes):
+        fans = {"exhaust": dict(self.FAN), "intake 1": dict(self.FAN), "intake 2": dict(self.FAN),
+                "air assist": dict(self.FAN)}
+        if intakes == 1:
+            fans["intake 2"] = {"fitted": False}
+        return {"fans": fans, "intake_fans": intakes, "purge_current_on": 628, "purge_current_off": 74,
+                "floors": dict(self.FLOORS)}
+
+    def setUp(self):
+        import tempfile
+        self.sysfs = tempfile.mkdtemp(prefix="forgetest-airflow-")
+        os.makedirs(os.path.join(self.sysfs, "head"))
+        with open(os.path.join(self.sysfs, "head", "purge_air"), "w") as f:
+            f.write("1\n")
+        self.saved_root = os.environ.get("GF_SYSFS_ROOT")
+        os.environ["GF_SYSFS_ROOT"] = self.sysfs + "/"
+        self.fake = helpers.FakeForgectrl().start()
+        self.fake.state["settings"].update({"cool_tach_intake_min_rpm": "2300"})
+        self.fake.state["cool"] = {"phase": "idle", "fan_gates": {"purge": {"reading": 628, "floor": 345}}}
+        self.dark = {"id": "", "running": False, "phase": "", "progress": 0, "elapsed_s": 0,
+                     "log": [], "prompt": None, "result": None, "error": "",
+                     "shots": {"lid": False, "head": False}}
+        self.versions = {}
+        self.polls = 0
+        self.wizard_result = self.result(2)
+        self.wizard_writes = None       # what the check writes; None = what its result says
+
+        def on_get(path, q):
+            if path == "/wiz/dark":
+                if self.dark["running"]:
+                    self.polls += 1
+                    if self.polls >= 2:
+                        r = self.wizard_result
+                        s = self.fake.state["settings"]
+                        s.update(r["floors"])
+                        s["cool_intake_fans"] = self.wizard_writes or str(r["intake_fans"])
+                        self.dark.update({"running": False, "progress": 100, "result": r})
+                        self.versions["airflow"] = 1
+                return 200, dict(self.dark)
+            if path == "/wiz":
+                return 200, {"versions": dict(self.versions), "required": [], "completed": True}
+            return None
+
+        def on_post(path, form):
+            s = self.fake.state["settings"]
+            if path == "/wiz/airflow/start":
+                self.dark.update({"id": "airflow", "running": True, "phase": "fans to the run profile"})
+                return 200, {"started": True, "id": "airflow"}
+            if path == "/settings":
+                for k, v in form.items():
+                    if v == "":
+                        s.pop(k, None)
+                    else:
+                        s[k] = v
+                return 200, dict(s)
+            return None
+        self.fake.on_get = on_get
+        self.fake.on_post = on_post
+
+    def tearDown(self):
+        import shutil
+        self.fake.stop()
+        if self.saved_root is None:
+            os.environ.pop("GF_SYSFS_ROOT", None)
+        else:
+            os.environ["GF_SYSFS_ROOT"] = self.saved_root
+        shutil.rmtree(self.sysfs, ignore_errors=True)
+
+    def run_check(self):
+        t = catalog.load_suite()["setup.check-airflow"]
+        run = Run("test", t.id, t.title)
+        t.fn(Context(run, None, t))
+        return run
+
+    def assert_put_back(self):
+        s = self.fake.state["settings"]
+        self.assertEqual(s.get("cool_tach_intake_min_rpm"), "2300")
+        self.assertNotIn("cool_intake_fans", s)
+        self.assertNotIn("cool_tach_exhaust_min_rpm", s)
+
+    def test_two_intake_fans_pass_and_are_put_back(self):
+        self.run_check()
+        self.assert_put_back()
+
+    def test_one_intake_fan_passes_with_intake_2_not_fitted(self):
+        self.wizard_result = self.result(1)
+        self.run_check()
+        self.assert_put_back()
+
+    def test_one_intake_fan_with_the_setting_left_at_two_fails(self):
+        self.wizard_result = self.result(1)
+        self.wizard_writes = "2"
+        with self.assertRaises(Exception) as cm:
+            self.run_check()
+        self.assertIn("cool_intake_fans reads '2', the check found 1", str(cm.exception))
+        self.assert_put_back()
+
+    def test_a_result_without_the_count_fails(self):
+        r = self.result(2)
+        del r["intake_fans"]
+        self.wizard_result = r
+        self.wizard_writes = "2"
+        with self.assertRaises(Exception) as cm:
+            self.run_check()
+        self.assertIn("no intake fan count", str(cm.exception))
+        self.assert_put_back()
+
+
 if __name__ == "__main__":
     unittest.main()