# nh3-nas → ana-nas restic mirror (return leg)

Symmetric counterpart to `configs/rsync/ana-nas-to-nh3/`. Nightly
rsync of the NH3-side restic repo to the Ana NAS, so file-level
backups for nh3-docker and nh3-dev have cross-site redundancy.

## What + where

| | |
|---|---|
| **Source** | `nh3-nas:/volume1/Backup/restic/` (Btrfs on cachedev_0, written by rest-server-nh3 on nh3-nas). Holds per-client repos: nh3-docker/, nh3-dev/, repo/. |
| **Target** | `ana-nas:/mnt/backup/restic-nh3-mirror/` (ZFS `NASPool/backupStore`, 20 TB pool with ~20 TB free at setup). |
| **Runs on** | `nh3-nas` (Synology RS2418+, DSM 7+ with native systemd). |
| **Runs as** | **`root`** — required because rest-server-nh3's Docker container writes restic files as `admin:users mode 400`, and only root (via CAP_DAC_READ_SEARCH) can read them. Running as `syncuser` was tried first and denied. See gotchas below. |
| **Auth** | Dedicated ed25519 keypair `/root/.ssh/id_mirror_ana` → `lkraven@ana-nas`. No passphrase. |
| **Schedule** | Daily at 05:00, `Persistent=true`, 300s randomized delay. |

## Why 05:00

Slots between:
- 04:00 ana-nas → nh3-nas (the other mirror) — lets that finish before
  NH3 starts pushing anything back.
- 06:00 PBS-ANA → PBS-NH3 sync — avoids WAN contention with the much
  larger PBS replication.

## DSM-specific notes

- DSM 7.x ships a stripped/older systemd. Unit files in
  `/etc/systemd/system/` persist across DSM updates but are NOT
  guaranteed to — verify after each DSM major update.
- **DSM systemd is pre-v247** — it refuses `Restart=on-failure` on
  `Type=oneshot` services, and does not recognize `StartLimitBurst`
  or `StartLimitIntervalSec`. This service deliberately omits those;
  a failed run just means the daily timer picks up again tomorrow.
  For a mirror used as DR (not primary), that's acceptable.
- `systemctl --now` flag is also absent. Use `enable` + `start`
  separately on DSM.
- `syncuser` has `administrators` group membership, so sudo works
  for unit installation. `syncuser` itself runs the service (no
  privilege escalation at runtime).
- rsync lives at `/usr/bin/rsync` on DSM (same as Debian). Older
  `/bin/rsync` doesn't exist.
- `scp` to DSM needs `-O` (legacy protocol) — sftp subsystem is off
  by default. Either enable SFTP in DSM (**Control Panel → File
  Services → FTP → SFTP**) or keep using `scp -O`.
- **rest-server-nh3 writes restic files as `admin:users mode 400`**
  (via DSM ContainerManager). syncuser cannot read these even with
  admins-group ACL because the newer DSM doesn't ship `synoacltool`
  to add per-user ACEs. The service therefore runs as root
  (CAP_DAC_READ_SEARCH bypasses the 400 mode).
- **rsync `--archive` broke cross-filesystem perm/owner preservation**
  from Btrfs-with-syno_acl → ZFS-on-Debian — the dest dir ended up
  mode `0000` and rsync couldn't recover on subsequent runs. Switched
  to `-rlt --no-perms --no-owner --no-group --chmod=D755,F644` which
  copies contents verbatim and forces sensible dest perms. Restic's
  repo integrity doesn't rely on Unix perms so this is a clean swap.

## Files

| File | Install path on nh3-nas |
|---|---|
| `restic-mirror-to-ana.service` | `/etc/systemd/system/restic-mirror-to-ana.service` |
| `restic-mirror-to-ana.timer`   | `/etc/systemd/system/restic-mirror-to-ana.timer` |

## Prereqs (one-time setup)

1. Generate the keypair on nh3-nas as syncuser:
   ```bash
   ssh nh3-nas "test -f ~/.ssh/id_mirror_ana || ssh-keygen -t ed25519 -N '' -f ~/.ssh/id_mirror_ana -C 'nh3-nas→ana-nas restic mirror'"
   ```
2. Install the pubkey on ana-nas:
   ```bash
   ssh nh3-nas 'cat ~/.ssh/id_mirror_ana.pub' | \
     ssh ana-nas 'cat >> ~/.ssh/authorized_keys'
   ```
3. Create the destination dir on ana-nas:
   ```bash
   ssh ana-nas 'sudo mkdir -p /mnt/backup/restic-nh3-mirror && \
                sudo chown lkraven:lkraven /mnt/backup/restic-nh3-mirror'
   ```
4. Smoke-test from nh3-nas as syncuser:
   ```bash
   ssh nh3-nas 'ssh -i ~/.ssh/id_mirror_ana -o StrictHostKeyChecking=accept-new \
                  lkraven@10.250.50.50 "hostname && ls -ld /mnt/backup/restic-nh3-mirror"'
   ```

## Deploy

```bash
cd configs/rsync/nh3-nas-to-ana
scp restic-mirror-to-ana.{service,timer} nh3-nas:/tmp/
ssh -t nh3-nas 'sudo install -m 644 /tmp/restic-mirror-to-ana.service /etc/systemd/system/ && \
                sudo install -m 644 /tmp/restic-mirror-to-ana.timer   /etc/systemd/system/ && \
                sudo systemctl daemon-reload && \
                sudo systemctl enable --now restic-mirror-to-ana.timer && \
                sudo systemctl start restic-mirror-to-ana.service && \
                sudo systemctl list-timers restic-mirror-to-ana.timer'
```

## Operate

Mirrors the ana-nas side — see that README. Replace
`restic-mirror-to-nh3` with `restic-mirror-to-ana` and `ana-nas` with
`nh3-nas` in the commands there.