Commit Graph
3 Commits
Author SHA1 Message Date
vh caa04801f3 fix(parakeet): move the seat from the empty GPU 3 to GPU 0
Placed on GPU 3 first because it was the empty card. That was the wrong read:
the seat is ~800 MiB, under 1% of a 96 GB card, so the question was never "where
does it fit" but "whose headroom is cheapest to spend".

vLLM sizes its KV cache as a fraction of TOTAL VRAM, not free VRAM. A resident
tenant on an otherwise-clean card therefore does not cost its own megabytes — it
costs the profiling margin of whatever full-size seat lands there later, and
flash-next needs 93 GiB of 96. A 96 GB card at 2 MiB can still take that; the
same card at 922 MiB is one where the next big seat needs its utilization
hand-trimmed, which this repo's flash-next history shows is both thin and silent
when it goes wrong.

Committed utilization per card is the number that governs, not free bytes:

    GPU 0   0.40 + 0.48                       = 0.88    ~13 GB spare  <- moved here
    GPU 1   0.52+0.24+0.10+0.055+0.03+0.03    = 0.975   ~4.3 GB
    GPU 2   0.96                                        ~1.8 GB
    GPU 3   -                                           kept empty as reserve

GPU 3 is back to 2 MiB / 97,247 MiB free and is now documented as a deliberate
reserve rather than a spare.

Post-move n=5 on the same clip: 0.68 / 0.54 / 0.54 / 0.52 / 0.53 s, median 0.54 s
against 0.50 s on GPU 3. The spreads overlap at this sample size and no difference
is claimed; the GPU 3 figure was taken on an idle card and is now noted as a best
case, since the seat shares GPU 0 with the hot serving path. Silence control and
the gateway round-trip both re-verified after the move.

Also records both Parakeet endpoints (FV v3 on Blackwell, IRV v2 on a 3090) and
the four confounds that make them not an A/B pair, sent to tts-dev for the bench.
2026-09-15 01:50:25 -07:00
vh b9b14b5baf feat(parakeet): stand up Parakeet STT on fv-ml1 GPU 3 + LiteLLM ext-stt/whisper-1
Retargets the existing sherpa-onnx stack from irv-ml1 to fv-ml1's utility card
and puts it behind the gateway. GPU 3 was the only card with room: 0/1/2 carry
the vLLM seats at 84-95.5 GB of 96.

Changes:

- compose: pin GPU via `device_ids: ["3"]` (the dead on-host stub used
  `count: all`, which would have handed a 0.6B ASR seat all four cards);
  join traefik-net; port 8300; homepage href to the live FV address.
- .env.example: default to the v3 int8 model (25 European languages, 464 MiB)
  rather than English-only v2; models to /tank/parakeet/models.
- app.py: warm the recognizer at startup before uvicorn accepts traffic.

The warmup is not an optimisation. ONNX Runtime's CUDA EP compiles and autotunes
lazily on the FIRST DECODE, and on sm_120 that measured 45.7s cold (reproduced at
45.1s on a second container) against ~0.50s warm. A 45s first request is
indistinguishable from a hang and LiteLLM's default timeout abandons it long
before it returns. Decoding 1s of silence at load moves the cost inside the
healthcheck's 300s start_period; first real request after restart is now 0.65s.

Verification, because "provider=cuda" in the log is only an echo of the env var:
ORT falls back to CPU silently and still returns correct text, so the service
being up and the transcript being right establishes nothing. The discriminator is
a process on GPU 3 (922 MiB), confirmed. Controls both directions — a known TTS
sentence transcribes near-exactly (positive), 3s of digital silence returns
empty (null). Warm throughput 0.50s median on an 8.52s clip, n=5, spread
0.47-0.65s, single-stream, one clip: a smoke measurement with its harness
stated, not a benchmark.

Gateway aliases `ext-stt` (engine-neutral, mirrors ext-tts) and `whisper-1`
(OpenAI-compatible drop-in) registered via POST /model/new, i.e. LiteLLM's
Postgres store where the ext-tts family already lives — no gateway restart, and
config.yaml is consequently not a complete picture of what the gateway serves.
Both verified end to end.

The aliases use a raw IP deliberately: ana-docker resolves no .internal names at
all (resolv.conf points at 1.1.1.1), and LiteLLM only reaches irv-ml1 through a
hand-pinned extra_hosts entry. A second hosts entry would mean recreating the
container and bouncing the gateway for every consumer.

Also records the svos_miranda plugin validation pass and its structural findings,
and notes that the irv-ml1 parakeet is still running — there are two now, and
retiring the old one is the operator's call.
2026-09-15 01:41:41 -07:00
vh 91bda3c480 fv-ml1: complete the cutover — rename, renumber, DNS, and the LiteLLM repoint
The box is physically at Fountain Valley, renamed, renumbered onto 10.251/16,
and serving inference again. This lands the repo half of that.

Host: hostname ana-ml2 -> fv-ml1, pinned to 10.251.50.54 by a dnsmasq
reservation so the address the runbook, DNS and LiteLLM all assume is the
address it actually has. Its headscale node is renamed too.

The sweep ran from scripts/fv-ml1-rename-sweep.sh, whose allowlist is the
reason this diff touches current-state files and not the record. Dated
persistent-memory entries, archival-memory and incident notes still say
ana-ml2 in 31 and 62 places respectively, because that is what the box was
when those things happened. Rewriting them would make the history lie.

LiteLLM was the load-bearing piece and needed more than the api_base sed the
runbook describes. Twenty api_base entries repointed, but a grep-and-verify
pass also caught a LIVE pass_through_endpoints target for the scalar-judge
reward route still on the old address -- an api_base-only substitution would
have left it dead. Four prose references describing current state were
repointed as well; one historical note recording where a hand-test was run
is deliberately left pointing at 10.250.50.54.

Two facts in the server tables were wrong and are corrected here. The site is
Fountain Valley, not Anaheim. And the box has FOUR RTX PRO 6000 Blackwell
Max-Q, not two -- verified by nvidia-smi -L and independently by PCI
enumeration of four GB202GL devices. That is 391 GB of VRAM rather than 196,
which changes what fits on it.

DNS: fv-ml1, fv-ml1-bmc and fv-gw added under the fv site via the piggyback
approach, scriberr re-homed, and the ana-ml2 records removed. Applied to all
three resolvers. The BMC record carries a warning that its 802.1q VLAN tag
must stay disabled -- it shipped tagging VLAN 250 into an untagged port,
which made it invisible to every network-side diagnostic and is the reason
it appeared dead through several cable changes.

Verified end to end: summarizer and sec both answer through the Anaheim
gateway across the mesh to FV seats on different ports.
2026-09-12 22:00:50 -07:00